Juniper-OSPF-MIB

All MIBs › Juniper-OSPF-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2002-09-16

Category: Protocol: OSPF, Vendor: Juniper

Description: Juniper Networks MIB extending OSPF protocol management objects for Juniper E-series routers including area and neighbor state.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Juniper-OSPF-MIB?

Juniper-OSPF-MIB is a Juniper Networks enterprise MIB that extends OSPF protocol management for Juniper's E-series (ERX) routing platforms, supplementing the standard OSPF-MIB with Juniper-specific process, area, and performance parameters. It exposes configuration data (SPF hold interval, reference bandwidth, auto virtual-link enablement, route-preference/distance values per route type) alongside performance-oriented counters such as SPF run timing and received hello/database-description packet counts. Its monitoring value centers on software/protocol status: administrators use it to confirm the OSPF process is active, track SPF recalculation frequency and timing (a proxy for routing instability), and watch neighbor packet exchange counts to detect adjacency problems. The module builds directly on the standard IETF OSPF-MIB, extending its object model with Juniper-specific process- and distance-related parameters rather than replacing it. It is deployed on Juniper E-series routers running OSPF in service-provider or enterprise core/edge networks. Network engineers evaluating or troubleshooting this functionality can download the Juniper-OSPF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-OSPF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks E-series router

Monitoring Examples

An operator would poll juniOspfProcessId and juniOspfNumActiveAreas to confirm the expected number of OSPF areas are active on the router, then check juniOspfSpfTime and juniOspfSpfHoldInterval to see how frequently SPF recalculations are occurring — frequent SPF runs indicate topology flapping. juniOspfHelloPktsRcv and juniOspfDDPktsRcv per neighbor help confirm two-way adjacency exchange is healthy, while juniOspfRefBw is checked to ensure cost calculations align with the network's actual link speeds.

What Can Be Monitored

OSPF process status
active area count
SPF recalculation frequency and timing
hello/DD packet receive counts
route preference/distance settings
reference bandwidth setting

Imported Objects

From IF-MIB

InterfaceIndexOrZero

From Juniper-MIBs

juniMibs

MODULE-IDENTITY

From OSPF-MIB

ospfAddressLessIf
ospfAreaEntry	OBJECT-TYPE
ospfIfEntry
ospfIfIpAddress
ospfNbrEntry
ospfVirtIfEntry

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using juniOspfNumActiveAreas OID:

Select a Juniper Networks E-series router (OSPF process/area/performance) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type juniOspfNumActiveAreas into the Find box to locate it in the OID tree, then select it and click OK. The number of active areas. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
C32 juniOspfAllocFailAck	1.3.6.1.4.1.4874.2.2.14.1.1.31	Counter32	read-only	Number of LS ACK allocation failures.
C32 juniOspfAllocFailCirc	1.3.6.1.4.1.4874.2.2.14.1.1.33	Counter32	read-only	Number of OSPF interface allocation failures.
C32 juniOspfAllocFailDbPkt	1.3.6.1.4.1.4874.2.2.14.1.1.32	Counter32	read-only	Number of DD packet allocation failures.
C32 juniOspfAllocFailDbRequest	1.3.6.1.4.1.4874.2.2.14.1.1.29	Counter32	read-only	Number of database request allocation failures.
C32 juniOspfAllocFailLsa	1.3.6.1.4.1.4874.2.2.14.1.1.27	Counter32	read-only	Number of LSA allocation failures.
C32 juniOspfAllocFailLsd	1.3.6.1.4.1.4874.2.2.14.1.1.28	Counter32	read-only	Number of LSA HDR allocation failures.
C32 juniOspfAllocFailNbr	1.3.6.1.4.1.4874.2.2.14.1.1.26	Counter32	read-only	Number of neighbor allocation failures.
C32 juniOspfAllocFailPkt	1.3.6.1.4.1.4874.2.2.14.1.1.34	Counter32	read-only	Number of OSPF general packet allocation failures.
C32 juniOspfAllocFailRtx	1.3.6.1.4.1.4874.2.2.14.1.1.30	Counter32	read-only	Number of RTX allocation failures.
juniOspfAreaEntry	1.3.6.1.4.1.4874.2.2.14.1.2.1		not-accessible	The OSPF area entry describes OSPF-specific characteristics of one area.
juniOspfAreaGroup	1.3.6.1.4.1.4874.2.2.14.4.2.3			An object which augments the standard MIB objects for managing OSPF areas capabilities in a Juniper product.
juniOspfAreaTable	1.3.6.1.4.1.4874.2.2.14.1.2		not-accessible	The Juniper OSPF area table describes the OSPF-specific characteristics of areas.
T/F juniOspfAreaTeCapable	1.3.6.1.4.1.4874.2.2.14.1.2.1.2	TruthValue	read-write	Configure the specified area TE capable to flood the TE information.
INT juniOspfAreaType	1.3.6.1.4.1.4874.2.2.14.1.2.1.1	INTEGER	read-only	The type of this area.
T/F juniOspfAutoVlink	1.3.6.1.4.1.4874.2.2.14.1.1.7	TruthValue	read-write	Set this object to true(1) in order to have virtual links automatically configured.
juniOspfBasicGroup	1.3.6.1.4.1.4874.2.2.14.4.2.1			Obsolete collection of objects for managing general OSPF capabilities in a Juniper product. This group became obsolete when juniOspfVpnRouteTag, juniOspfDomainId, juniOspfAreaTeCapable and juniOspfMplsTeRtrIdIfIndex were added.
juniOspfBasicGroup2	1.3.6.1.4.1.4874.2.2.14.4.2.10			A collection of objects for managing general OSPF capabilities in a Juniper product.
juniOspfCompliance	1.3.6.1.4.1.4874.2.2.14.4.1.1			Obsolete compliance statement for entities which implement the Juniper OSPF MIB. This statement became obsolete when juniOspfVpnRouteTag, juniOspfDomainId, juniOspfAreaTeCapable and juniOspfMplsTeRtrIdIfIndex were added to the basic group.
juniOspfCompliance2	1.3.6.1.4.1.4874.2.2.14.4.1.2			The compliance statement for entities which implement the Juniper OSPF MIB. This statement became obsolete when juniOspfIfBFDTable was implemented.
juniOspfCompliance3	1.3.6.1.4.1.4874.2.2.14.4.1.3			The compliance statement for entities which implement the Juniper OSPF MIB.
juniOspfCompliances	1.3.6.1.4.1.4874.2.2.14.4.1
juniOspfConformance	1.3.6.1.4.1.4874.2.2.14.4
C32 juniOspfCsumErrPkts	1.3.6.1.4.1.4874.2.2.14.1.1.25	Counter32	read-only	Number of packets received with a checksum error.
C32 juniOspfDDPktsRcv	1.3.6.1.4.1.4874.2.2.14.1.1.12	Counter32	read-only	Number of database description packets received.
C32 juniOspfDDPktsSent	1.3.6.1.4.1.4874.2.2.14.1.1.19	Counter32	read-only	Number of database description packets sent.
U32 juniOspfDomainId	1.3.6.1.4.1.4874.2.2.14.1.1.37	Unsigned32	read-write	OSPF domain ID.
C32 juniOspfErrPktsSent	1.3.6.1.4.1.4874.2.2.14.1.1.23	Counter32	read-only	Number of packets dropped.
I32 juniOspfExtDistance	1.3.6.1.4.1.4874.2.2.14.1.1.10	Integer32	read-write	Default distance for external type 5 and type 7 routes.
juniOspfGeneralGroup	1.3.6.1.4.1.4874.2.2.14.1.1
juniOspfGroups	1.3.6.1.4.1.4874.2.2.14.4.2
C32 juniOspfHelloPktsRcv	1.3.6.1.4.1.4874.2.2.14.1.1.11	Counter32	read-only	Number of hello packets received.
C32 juniOspfHelloPktsSent	1.3.6.1.4.1.4874.2.2.14.1.1.18	Counter32	read-only	Number of hello packets sent.
C32 juniOspfIfAdjNbrCount	1.3.6.1.4.1.4874.2.2.14.1.7.1.5	Counter32	read-only	Number of OSPF adjacent neighbors from this interface.
T/F juniOspfIfBfdEnable	1.3.6.1.4.1.4874.2.2.14.1.8.1.1	TruthValue	read-create	This variable indicates whether BFD session on the interface is active or not
juniOspfIfBFDEntry	1.3.6.1.4.1.4874.2.2.14.1.8.1		not-accessible	The Juniper OSPF interface table describes the BFD-specific characteristics of one interface.
juniOspfIfBFDGroup	1.3.6.1.4.1.4874.2.2.14.4.2.11			A collection of objects for OSPFv2 BFD client configuration.
I32 juniOspfIfBfdMinRxInterval	1.3.6.1.4.1.4874.2.2.14.1.8.1.2	Integer32	read-create	This variable specifies upper-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds]
I32 juniOspfIfBfdMinTxInterval	1.3.6.1.4.1.4874.2.2.14.1.8.1.3	Integer32	read-create	This variable specifies lower-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds]
I32 juniOspfIfBfdMultiplier	1.3.6.1.4.1.4874.2.2.14.1.8.1.4	Integer32	read-create	This variable specifies detection-multiplier
juniOspfIfBFDTable	1.3.6.1.4.1.4874.2.2.14.1.8		not-accessible	The Juniper OSPF interface table describes the BFD-specific characteristics of interfaces.
I32 juniOspfIfCost	1.3.6.1.4.1.4874.2.2.14.1.7.1.1	Integer32	read-create	The cost value for this interface.
juniOspfIfEntry	1.3.6.1.4.1.4874.2.2.14.1.7.1		not-accessible	The OSPF interface entry describes OSPF-specific characteristics of one interface.
juniOspfIfGroup	1.3.6.1.4.1.4874.2.2.14.4.2.2			A collection of objects which augments the standard MIB objects for managing OSPF Interface capabilities in a Juniper product.
IP juniOspfIfMask	1.3.6.1.4.1.4874.2.2.14.1.7.1.2	IpAddress	read-create	The mask used to derive the network range of this interface.
OCT juniOspfIfMd5AuthKey	1.3.6.1.4.1.4874.2.2.14.1.7.1.6	OCTET STRING	read-create	The MD5 authentication key. When setting this object, the juniOspfIfMd5AuthKeyId must be specified on the same PDU. For simple text authentication type, use ospfIfAuthKey. Setting this object will have the side effect of adding or updating the correspondent entry in juniOspfMd5IntfKeyTable. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the right of the given key. Reading this object always results in an OCTET STRING of length zero.
I32 juniOspfIfMd5AuthKeyId	1.3.6.1.4.1.4874.2.2.14.1.7.1.7	Integer32	read-create	The MD5 authentication key ID. When setting this object, juniOspfIfMd5AuthKey must be specified on the same PDU.
C32 juniOspfIfNbrCount	1.3.6.1.4.1.4874.2.2.14.1.7.1.4	Counter32	read-only	Number of OSPF neighbors from this interface.
INT juniOspfIfPassiveFlag	1.3.6.1.4.1.4874.2.2.14.1.7.1.3	INTEGER	read-create	Flag to indicate whether routing updates should be suppressed on this interface. To actively perform routing updates, set this object to disabled(0).
juniOspfIfTable	1.3.6.1.4.1.4874.2.2.14.1.7		not-accessible	The Juniper OSPF interface table describes the OSPF-specific characteristics of interfaces.
I32 juniOspfInterDistance	1.3.6.1.4.1.4874.2.2.14.1.1.9	Integer32	read-write	Default distance for inter-area routes.
I32 juniOspfIntraDistance	1.3.6.1.4.1.4874.2.2.14.1.1.8	Integer32	read-write	Default distance for intra-area routes.
C32 juniOspfLsAckPktsRcv	1.3.6.1.4.1.4874.2.2.14.1.1.15	Counter32	read-only	Number of link state ACK packets received.
C32 juniOspfLsAckPktsSent	1.3.6.1.4.1.4874.2.2.14.1.1.22	Counter32	read-only	Number of link state ACK packets sent.
C32 juniOspfLsaDiscardCnt	1.3.6.1.4.1.4874.2.2.14.1.1.17	Counter32	read-only	Number of LSA packets discarded.
C32 juniOspfLsrPktsRcv	1.3.6.1.4.1.4874.2.2.14.1.1.13	Counter32	read-only	Number of link state request packets received.
C32 juniOspfLsrPktsSent	1.3.6.1.4.1.4874.2.2.14.1.1.20	Counter32	read-only	Number of link state request packets sent.
C32 juniOspfLsuPktsRcv	1.3.6.1.4.1.4874.2.2.14.1.1.14	Counter32	read-only	Number of link state update packets received.
C32 juniOspfLsuPktsSent	1.3.6.1.4.1.4874.2.2.14.1.1.21	Counter32	read-only	Number of link state update packets sent.
I32 juniOspfMaxPathSplits	1.3.6.1.4.1.4874.2.2.14.1.1.2	Integer32	read-write	The maximum number of equal-cost routes that will be maintained by the OSPF protocol. A change in this value will be taken into account at the next shortest-path-first recalculation.
OCT juniOspfMd5IntfAuthKey	1.3.6.1.4.1.4874.2.2.14.1.16.1.3	OCTET STRING	read-create	The MD5 authentication key. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the right of the given key. Reading this object always results in an OCTET STRING of length zero.
juniOspfMd5IntfEntry	1.3.6.1.4.1.4874.2.2.14.1.16.1		not-accessible	The OSPF interface MD5 key entry describes OSPF-specific characteristics of one MD5 authentication's interface.
juniOspfMd5IntfGroup	1.3.6.1.4.1.4874.2.2.14.4.2.7			A collection of objects for managing OSPF MD5 interfaces capabilities in a Juniper product.
T/F juniOspfMd5IntfKeyActive	1.3.6.1.4.1.4874.2.2.14.1.16.1.2	TruthValue	read-create	Set this object to true(1) in order to have this key active.
I32 juniOspfMd5IntfKeyId	1.3.6.1.4.1.4874.2.2.14.1.16.1.1	Integer32	read-only	The OSPF interface this key belongs to.
ROW juniOspfMd5IntfRowStatus	1.3.6.1.4.1.4874.2.2.14.1.16.1.4	RowStatus	read-create	This variable displays the status of the entry.
juniOspfMd5IntfTable	1.3.6.1.4.1.4874.2.2.14.1.16		not-accessible	The Juniper OSPF interface MD5 key table describes OSPF-specific characteristics of the MD5 authentication key for the OSPF interfaces. This table is not to be used for the simple password authentication.
IP juniOspfMd5VirtIntfAreaId	1.3.6.1.4.1.4874.2.2.14.1.17.1.1	IpAddress	read-only	The OSPF area ID this key belongs to.
OCT juniOspfMd5VirtIntfAuthKey	1.3.6.1.4.1.4874.2.2.14.1.17.1.5	OCTET STRING	read-create	The MD5 authentication key. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the right of the given key. Reading this object always results in an OCTET STRING of length zero.
juniOspfMd5VirtIntfEntry	1.3.6.1.4.1.4874.2.2.14.1.17.1		not-accessible	The OSPF Interface MD5 Key entry describes OSPF-specific characteristics of one MD5 authentication's interface.
juniOspfMd5VirtIntfGroup	1.3.6.1.4.1.4874.2.2.14.4.2.8			A collection of objects for managing OSPF MD5 virtual interfaces capabilities in a Juniper product.
T/F juniOspfMd5VirtIntfKeyActive	1.3.6.1.4.1.4874.2.2.14.1.17.1.4	TruthValue	read-create	Set this object to true(1) in order to have this key active.
I32 juniOspfMd5VirtIntfKeyId	1.3.6.1.4.1.4874.2.2.14.1.17.1.3	Integer32	read-only	The OSPF virtual interface this key belongs to.
IP juniOspfMd5VirtIntfNeighbor	1.3.6.1.4.1.4874.2.2.14.1.17.1.2	IpAddress	read-only	The OSPF neightbor this key belongs to.
ROW juniOspfMd5VirtIntfRowStatus	1.3.6.1.4.1.4874.2.2.14.1.17.1.6	RowStatus	read-create	This variable displays the status of the entry.
juniOspfMd5VirtIntfTable	1.3.6.1.4.1.4874.2.2.14.1.17		not-accessible	The Juniper OSPF interface MD5 key table describes OSPF-specific characteristics of the MD5 authentication key for the OSPF interfaces. This table is not to be used for the simple password authentication.
juniOspfMIB	1.3.6.1.4.1.4874.2.2.14			The OSPF Protocol MIB for the Juniper Networks enterprise.
NUM juniOspfMplsTeRtrIdIfIndex	1.3.6.1.4.1.4874.2.2.14.1.1.38	InterfaceIndexOrZero	read-write	Configure the stable router interface id to designate it as TE capable.
IP juniOspfNbrBDR	1.3.6.1.4.1.4874.2.2.14.1.10.1.3	IpAddress	read-only	The neighbor's idea of backup designated router.
IP juniOspfNbrDR	1.3.6.1.4.1.4874.2.2.14.1.10.1.2	IpAddress	read-only	The neighbor's idea of designated router.
juniOspfNbrEntry	1.3.6.1.4.1.4874.2.2.14.1.10.1		not-accessible	The OSPF neighbor entry describes OSPF-specific characteristics of one neighbor.
juniOspfNbrGroup	1.3.6.1.4.1.4874.2.2.14.4.2.5			A collection of objects which augments the standard MIB objects for managing OSPF neighbor capabilities in a Juniper product.
IP juniOspfNbrLocalIpAddr	1.3.6.1.4.1.4874.2.2.14.1.10.1.1	IpAddress	read-only	The local IP address on this OSPF circuit.
juniOspfNbrTable	1.3.6.1.4.1.4874.2.2.14.1.10		not-accessible	The Juniper OSPF neighbor table describes the OSPF-specific characteristics of neighbors.
IP juniOspfNetRangeAreaId	1.3.6.1.4.1.4874.2.2.14.1.18.1.3	IpAddress	read-only	The OSPF area ID this network range belongs to.
juniOspfNetRangeGroup	1.3.6.1.4.1.4874.2.2.14.4.2.9			A collection of objects for managing OSPF network range capabilities in a Juniper product.
IP juniOspfNetRangeMask	1.3.6.1.4.1.4874.2.2.14.1.18.1.2	IpAddress	read-only	The subnet mask used for the network range. Unlike the mask used under the command line interface (CLI), this object is set in the non-inversed format (i.e. not a wild-card mask).
IP juniOspfNetRangeNet	1.3.6.1.4.1.4874.2.2.14.1.18.1.1	IpAddress	read-only	The network range address.
ROW juniOspfNetRangeRowStatus	1.3.6.1.4.1.4874.2.2.14.1.18.1.4	RowStatus	read-create	This variable displays the status of the entry.
juniOspfNetworkRangeEntry	1.3.6.1.4.1.4874.2.2.14.1.18.1		not-accessible	The Juniper OSPF network range entry describes OSPF-specific characteristics of one OSPF network range.
juniOspfNetworkRangeTable	1.3.6.1.4.1.4874.2.2.14.1.18		not-accessible	The Juniper OSPF network range table describes the OSPF-specific characteristics of network ranges, encompassing one or multiple OSPF interfaces.
C32 juniOspfNumActiveAreasEx	1.3.6.1.4.1.4874.2.2.14.1.1.4	Counter32	read-only	The number of active areas.
juniOspfObjects	1.3.6.1.4.1.4874.2.2.14.1
T/F juniOspfOperState	1.3.6.1.4.1.4874.2.2.14.1.1.35	TruthValue	read-only	A flag to note whether this router is operational.
I32 juniOspfProcessId	1.3.6.1.4.1.4874.2.2.14.1.1.1	Integer32	read-write	An identifier having special semantics when set. When this object's value is zero, OSPF is disabled and cannot be configured. Setting this object to a nonzero value enables OSPF operation and permits further OSPF configuration to be performed. Once set to a nonzero value, this object cannot be modified.
U32 juniOspfRefBw	1.3.6.1.4.1.4874.2.2.14.1.1.6	Unsigned32	read-write	The reference bandwith, in bits per second. This object is used when OSPF automatic interface cost calculation is used.
I32 juniOspfSpfHoldInterval	1.3.6.1.4.1.4874.2.2.14.1.1.3	Integer32	read-write	The minimum amount of time that must elapse between shortest-path-first recalculations. Reducing this value can cause an immediate SPF recalulation if the new value is less than the current value of juniOspfSpfHoldTimeRemaining and other SPF-inducing protocol events have occurred.
C32 juniOspfSpfTime	1.3.6.1.4.1.4874.2.2.14.1.1.5	Counter32	read-only	The SPF schedule delay.
INT juniOspfSummAdminStat	1.3.6.1.4.1.4874.2.2.14.1.15.1.3	INTEGER	read-create	The admin status of this summary aggregation.
IP juniOspfSummAggMask	1.3.6.1.4.1.4874.2.2.14.1.15.1.2	IpAddress	read-only	The subnet mask used for the summary route.
IP juniOspfSummAggNet	1.3.6.1.4.1.4874.2.2.14.1.15.1.1	IpAddress	read-only	The summary address for a range of addresses.
juniOspfSummImportEntry	1.3.6.1.4.1.4874.2.2.14.1.15.1		not-accessible	The OSPF summary import entry describes OSPF-specific characteristics of one summary report.
juniOspfSummImportGroup	1.3.6.1.4.1.4874.2.2.14.4.2.6			A collection of objects for managing OSPF summary report capabilities in a Juniper product.
juniOspfSummImportTable	1.3.6.1.4.1.4874.2.2.14.1.15		not-accessible	The Juniper OSPF summary import table describes the OSPF-specific characteristics of network aggregation into the OSPF autonomous system. With this table, the load of advertising many external routes can be reduced by specifying a range which includes some or all of the external routes.
ROW juniOspfSummRowStatus	1.3.6.1.4.1.4874.2.2.14.1.15.1.4	RowStatus	read-create	This variable displays the status of the entry.
C32 juniOspfTotalRcv	1.3.6.1.4.1.4874.2.2.14.1.1.16	Counter32	read-only	Number of OSPF packets received.
C32 juniOspfTotalSent	1.3.6.1.4.1.4874.2.2.14.1.1.24	Counter32	read-only	Number of OSPF packets sent.
juniOspfVirtIfEntry	1.3.6.1.4.1.4874.2.2.14.1.9.1		not-accessible	The OSPF virtual interface entry describes OSPF-specific characteristics of one virtual interface.
juniOspfVirtIfGroup	1.3.6.1.4.1.4874.2.2.14.4.2.4			A collection of objects which augments the standard MIB objects for managing OSPF virtual interface capabilities in a Juniper product.
OCT juniOspfVirtIfMd5AuthKey	1.3.6.1.4.1.4874.2.2.14.1.9.1.1	OCTET STRING	read-create	The MD5 authentication key. When setting this object, the juniOspfVirtIfMd5AuthKeyId must be specified on the same PDU. For simple text authentication type, use ospfVirtIfAuthKey. Setting this object will have the side effect of adding or updating the correspondent entry in juniOspfMd5IntfKeyTable. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the right of the given key. Reading this object always results in an OCTET STRING of length zero.
I32 juniOspfVirtIfMd5AuthKeyId	1.3.6.1.4.1.4874.2.2.14.1.9.1.2	Integer32	read-create	The MD5 authentication key id. When setting this object, juniOspfVirtIfMd5AuthKey must be specified on the same psu.
juniOspfVirtIfTable	1.3.6.1.4.1.4874.2.2.14.1.9		not-accessible	The Juniper OSPF virtual interface table describes the OSPF-specific characteristics of virtual interfaces.
U32 juniOspfVpnRouteTag	1.3.6.1.4.1.4874.2.2.14.1.1.36	Unsigned32	read-write	VPN route tag value.

RFC description

Extends OSPF protocol management with Juniper-specific operational and configuration extensions for routing.

Start monitoring Juniper Networks E-series router (OSPF process/area/performance) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Juniper-OSPF-MIB