Juniper-HTTP-Profile-MIB

Description: Provides managed objects for HTTP access profile configuration applied to subscriber sessions on Juniper Networks E-series routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

This Juniper enterprise MIB for E-series routers defines HTTP access profiles applied to subscriber sessions, typically used in broadband access/edge deployments to redirect or control subscriber HTTP traffic. It exposes a profile table keyed by profile ID, containing a URL-set mapping and a redirect URL used to steer matching subscriber HTTP requests, for example toward a captive portal or walled-garden page. Monitoring emphasis is primarily on configuration status — administrators check juniHttpProfileTable entries to confirm the correct redirect URL and set-map are applied to a given profile, verifying subscriber-facing redirect behavior (such as service activation or payment portals) is configured as intended rather than exposing hardware counters. It operates alongside Juniper's subscriber/session management MIBs on E-series routers, since HTTP profiles are applied per subscriber session rather than standing alone. It is deployed on Juniper E-series broadband edge routers providing HTTP redirection for subscriber management in service-provider access networks, and a Juniper-HTTP-Profile-MIB download from Juniper's support site lets an admin load it into a MIB browser.

Polling juniHttpProfileTable/juniHttpProfileEntry by juniHttpProfileId lets an operator confirm juniHttpProfileRedirectUrl points to the correct captive-portal or walled-garden address, and juniHttpProfileSetMap shows which URL set is associated with the profile. This would typically be checked after a subscriber reports being redirected incorrectly, to verify the profile configuration matches the intended service policy rather than to track a live performance counter.

Manages HTTP profile configuration for ATM circuits on Juniper devices.