| OID symbolic | OID numeric | Type | Access | Description |
|---|
| juniDs3MIB | 1.3.6.1.4.1.4874.2.2.4 | | | The DS3 MIB for the Juniper Networks enterprise. This MIB contains
managed objects for DS3/E3 interfaces. Management objects are provided
to supplement those found in the standard DS3-MIB (RFC 2496). |
| juniDs3Objects | 1.3.6.1.4.1.4874.2.2.4.1 | | | |
| juniDsx3ConfigTable | 1.3.6.1.4.1.4874.2.2.4.1.1 | | not-accessible | This table contains entries for DS3/E3 interfaces present in the
system. |
| juniDsx3ConfigEntry | 1.3.6.1.4.1.4874.2.2.4.1.1.1 | | not-accessible | Each entry describes the characteristics of an DS3/E3 interface. |
| I32 juniDsx3LineLength | 1.3.6.1.4.1.4874.2.2.4.1.1.1.1 | Integer32 | read-create | The length of the DS3/E3 line in meters. This objects provides
information for line build out circuitry. This object is only useful if
the interface has configurable line build out circuitry. |
| INT juniDsx3LineType | 1.3.6.1.4.1.4874.2.2.4.1.1.1.2 | INTEGER | read-create | This variable indicates the variety of DS3 C-bit or E3 application
implementing this interface. The type of interface affects the
interpretation of the usage and error statistics. The rate of DS3 is
44.736 Mbps and E3 is 34.368 Mbps. The dsx3ClearChannel value means
that the C-bits are not used except for sending/receiving AIS. Note
that this object represents the actual line type when the corresponding
value of dsx3LineType is dsx3other(1).
The values, in sequence, describe:
TITLE: SPECIFICATION:
dsx3M23 ANSI T1.107-1988
dsx3SYNTRAN ANSI T1.107-1988
dsx3CbitParity ANSI T1.107a-1989
dsx3ClearChannel ANSI T1.102-1987
e3G832 ITU-T G.832
e3Framed ITU-T G.751
e3Plcp ETSI T/NA(91)18.
dsx3M23Plcp ATM Forum af-phy-0054.000
dsx3CbitParityPlcp ATM Forum af-phy-0054.000 |
| INT juniDsx3CellScramblerConfig | 1.3.6.1.4.1.4874.2.2.4.1.1.1.3 | INTEGER | read-create | This variable indicates the state of the ATM cell scrambler for
interfaces which support ATM over DS3 or E3. For interfaces which do
not support ATM, this object returns the value notSupported(3). |
| T/F juniDsx3Channelization | 1.3.6.1.4.1.4874.2.2.4.1.1.1.4 | TruthValue | read-create | The channelization setting for this DS3 interface; true(1) indicates
channelization, false(2) indicates no channelization. |
| INT juniDsx3InterfaceType | 1.3.6.1.4.1.4874.2.2.4.1.1.1.5 | INTEGER | read-create | The DS3 interface type setting. |
| INT juniDsx3Application | 1.3.6.1.4.1.4874.2.2.4.1.1.1.6 | INTEGER | read-create | The interface application setting. |
| INT juniDsx3Ds3Channel | 1.3.6.1.4.1.4874.2.2.4.1.1.1.7 | INTEGER | read-create | The DS3 channel setting. The range of channel settings depends on the
line rate of the underlying interface. |
| NUM juniDsx3LowerIfIndex | 1.3.6.1.4.1.4874.2.2.4.1.1.1.8 | InterfaceIndexOrZero | read-create | The ifIndex of the interface over which this DS3 interface is to be
layered. A value of zero indicates no layering. An implementation may
choose to require that a nonzero value be configured at entry creation. |
| ROW juniDsx3RowStatus | 1.3.6.1.4.1.4874.2.2.4.1.1.1.9 | RowStatus | read-create | Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support setting the
following values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniDsx3RowStatus
juniDsx3LowerIfIndex
In addition, when creating an entry the following conditions must hold:
A value for ifIndex must have been determined previously, by reading
juniDsx3NextIfIndex.
The interface identified by juniDsx3LowerIfIndex must exist.
A corresponding entry in ifTable/ifXTable/juniIfTable is created/
destroyed as a result of creating/destroying an entry in this table. |
| INT juniDsx3Ds3DsuMode | 1.3.6.1.4.1.4874.2.2.4.1.1.1.10 | INTEGER | read-create | The DSU configuration setting for this entry. |
| INT juniDsx3Ds3BandwidthLimit | 1.3.6.1.4.1.4874.2.2.4.1.1.1.11 | INTEGER | read-create | The DSU bandwidth configuration for this entry. |
| INT juniDsx3Ds3DsuScrambleMode | 1.3.6.1.4.1.4874.2.2.4.1.1.1.12 | INTEGER | read-create | The DSU scramble mode setting for this entry. |
| INT juniDsx3MdlCarrier | 1.3.6.1.4.1.4874.2.2.4.1.1.1.13 | INTEGER | read-create | Specifies the interface is used in carrier environment. |
| INT juniDsx3MdlTransmit | 1.3.6.1.4.1.4874.2.2.4.1.1.1.14 | INTEGER | read-create | Specifies transmission enabling. |
| STR juniDsx3MdlEic | 1.3.6.1.4.1.4874.2.2.4.1.1.1.15 | DisplayString | read-create | This is the equipment identification code. |
| STR juniDsx3MdlLic | 1.3.6.1.4.1.4874.2.2.4.1.1.1.16 | DisplayString | read-create | This is the location identification code. |
| STR juniDsx3MdlFic | 1.3.6.1.4.1.4874.2.2.4.1.1.1.17 | DisplayString | read-create | This is the frame identification code. |
| STR juniDsx3MdlUnit | 1.3.6.1.4.1.4874.2.2.4.1.1.1.18 | DisplayString | read-create | This is the unit identification code. |
| STR juniDsx3MdlPfi | 1.3.6.1.4.1.4874.2.2.4.1.1.1.19 | DisplayString | read-create | This is the facility identification code to send in the MDL path
message. |
| STR juniDsx3MdlPort | 1.3.6.1.4.1.4874.2.2.4.1.1.1.20 | DisplayString | read-create | This is the equipment port number to send in the MDL idle signal
message. |
| STR juniDsx3MdlGenerator | 1.3.6.1.4.1.4874.2.2.4.1.1.1.21 | DisplayString | read-create | This is the generator number to send in the MDL test signal message. |
| JUN juniDs3NextIfIndex | 1.3.6.1.4.1.4874.2.2.4.1.2 | JuniNextIfIndex | read-only | Coordinate ifIndex value allocation for entries in juniDsx3ConfigTable.
A GET of this object returns the next available ifIndex value to be used
to create an entry in the associated interface table; or zero, if no
valid ifIndex value is available. This object also returns a value of
zero when it is the lexicographic successor of a varbind presented in an
SNMP GETNEXT or GETBULK request, for which circumstance it is assumed
that ifIndex allocation is unintended.
Successive GETs will typically return different values, thus avoiding
collisions among cooperating management clients seeking to create table
entries simultaneously. |
| juniDsx3FarEndCurrentTable | 1.3.6.1.4.1.4874.2.2.4.1.3 | | not-accessible | This table contains entries for DS3/E3 interfaces present in the
system. |
| juniDsx3FarEndCurrentEntry | 1.3.6.1.4.1.4874.2.2.4.1.3.1 | | not-accessible | Each entry describes the characteristics of an DS3/E3 interface. |
| PER juniDsx3FarEndCurrentInvalidSeconds | 1.3.6.1.4.1.4874.2.2.4.1.3.1.1 | PerfCurrentCount | read-only | The counter associated with the number of Invalid Seconds encountered
by a DS3/E3 interface in the current 15 minute interval. |
| juniDsx3FarEndIntervalTable | 1.3.6.1.4.1.4874.2.2.4.1.4 | | not-accessible | This table contains entries for DS3/E3 interfaces present in the
system. |
| juniDsx3FarEndIntervalEntry | 1.3.6.1.4.1.4874.2.2.4.1.4.1 | | not-accessible | Each entry describes the characteristics of an DS3/E3 interface. |
| NUM juniDsx3FarEndIntervalInvalidSeconds | 1.3.6.1.4.1.4874.2.2.4.1.4.1.1 | PerfIntervalCount | read-only | The counter associated with the number of Invalid Seconds encountered
by a DS3/E3 interface in one of the previous 96 individual 15 minute
intervals. |
| juniDsx3FarEndTotalTable | 1.3.6.1.4.1.4874.2.2.4.1.5 | | not-accessible | This table contains entries for DS3/E3 interfaces present in the
system. |
| juniDsx3FarEndTotalEntry | 1.3.6.1.4.1.4874.2.2.4.1.5.1 | | not-accessible | Each entry describes the characteristics of an DS3/E3 interface. |
| PER juniDsx3FarEndTotalInvalidSeconds | 1.3.6.1.4.1.4874.2.2.4.1.5.1.1 | PerfTotalCount | read-only | The counter associated with the number of Invalid Seconds encountered
by a DS3/E3 interface in the previous 24 hour interval. |
| juniDsx3FarEndConfigTable | 1.3.6.1.4.1.4874.2.2.4.1.6 | | not-accessible | This table contains entries for DS3/E3 interfaces present in the
system. |
| juniDsx3FarEndConfigEntry | 1.3.6.1.4.1.4874.2.2.4.1.6.1 | | not-accessible | Each entry describes the far end configuration characteristics of an
DS3/E3 interface. |
| STR juniDsx3FarEndPortNumber | 1.3.6.1.4.1.4874.2.2.4.1.6.1.1 | DisplayString | read-write | This code identifies the port number of the Far End DS3. It is sent
within the Idle Signal Message. |
| STR juniDsx3FarEndGeneratorNumber | 1.3.6.1.4.1.4874.2.2.4.1.6.1.2 | DisplayString | read-write | This code identifies the Far End DS3 Generator Number. It is sent
within the Test Signal Message. |
| INT juniDsx3FarEndCarrier | 1.3.6.1.4.1.4874.2.2.4.1.6.1.3 | INTEGER | read-write | Specifies the interface is used in carrier environment. It is sent
with MDL messages. |
| juniDs3Conformance | 1.3.6.1.4.1.4874.2.2.4.4 | | | |
| juniDs3Compliances | 1.3.6.1.4.1.4874.2.2.4.4.1 | | | |
| juniDs3Compliance | 1.3.6.1.4.1.4874.2.2.4.4.1.1 | | | Obsolete compliance statement for entities which implement the Juniper
DS3/E3 MIB. This statement became obsolete when support was added for
line type and cell scrambler objects. |
| juniDs3Compliance2 | 1.3.6.1.4.1.4874.2.2.4.4.1.2 | | | Obsolete compliance statement for entities which implement the Juniper
DS3/E3 MIB. This statement became obsolete when support was added for
DSU objects. |
| juniDs3Compliance3 | 1.3.6.1.4.1.4874.2.2.4.4.1.3 | | | Obsolete compliance statement for entities which implement the Juniper
DS3/E3 MIB. This statement became obsolete when support was added for
dynamic DS3 interface objects. |
| juniDs3Compliance4 | 1.3.6.1.4.1.4874.2.2.4.4.1.4 | | | Obsolete compliance statement for entities which implement the Juniper
DS3/E3 MIB. This statement became obsolete when far end invalid seconds
objects and more configuration objects were added. |
| juniDs3Compliance5 | 1.3.6.1.4.1.4874.2.2.4.4.1.5 | | | Obsolete compliance statement for entities which implement the Juniper
DS3/E3 MIB. This statement became obsolete when support was added for
far end generator number, port number and carrier. |
| juniDs3Compliance6 | 1.3.6.1.4.1.4874.2.2.4.4.1.6 | | | The compliance statement for entities which implement the Juniper
DS3/E3 MIB. |
| juniDs3Groups | 1.3.6.1.4.1.4874.2.2.4.4.2 | | | |
| juniDs3Group | 1.3.6.1.4.1.4874.2.2.4.4.2.1 | | | Obsolete collection of objects providing management of DS3/E3
interfaces in a Juniper product. This group became obsolete when
support was added for line type and cell scrambler objects. |
| juniDs3Group2 | 1.3.6.1.4.1.4874.2.2.4.4.2.2 | | | Obsolete collection of objects providing management of DS3/E3
interfaces in a Juniper product. This group became obsolete when
support was added for DSU configuration objects. |
| juniDs3Group3 | 1.3.6.1.4.1.4874.2.2.4.4.2.3 | | | Obsolete collection of objects providing management of DS3/E3
interfaces in a Juniper product. This group became obsolete when
support was added for dynamic DS3 interface objects. |
| juniDs3Group4 | 1.3.6.1.4.1.4874.2.2.4.4.2.4 | | | Obsolete collection of objects providing management of DS3/E3
interfaces in a Juniper product. This group became obsolete when more
configuration objects were added. |
| juniDs3Group5 | 1.3.6.1.4.1.4874.2.2.4.4.2.5 | | | A collection of objects providing management of DS3/E3 interfaces in a
Juniper product. |
| juniDs3FarEndGroup | 1.3.6.1.4.1.4874.2.2.4.4.2.6 | | | Obsolete collection of objects providing remote statistics information
applicable to DS3 interfaces in a Juniper product. This group became
obsolete when remote port number, generator number and carrier objects
were added. |
| juniDs3FarEndGroup2 | 1.3.6.1.4.1.4874.2.2.4.4.2.7 | | | A collection of objects providing remote statistics information
applicable to DS3 interfaces in a Juniper product. |
