All MIBs › JUNIPER-IFOTN-MIB
Organization: Juniper Networks, Inc.
Last Updated: 2016-09-12
Category: Domain: Optical Transport, Network Interfaces, Optical and WDM, Technology: Optical Transport, Vendor: Juniper
Description: Defines managed objects for Optical Transport Network (OTN) interface monitoring on Juniper Networks devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is JUNIPER-IFOTN-MIB?
JUNIPER-IFOTN-MIB is a Juniper Networks enterprise MIB for managing and monitoring Optical Transport Network (OTN) interfaces, covering the ITU-T G.709 OTN hierarchy of Optical Channel (OCh), Optical Channel Transport Unit (OTUk), and Optical Channel Data Unit (ODUk) layers on Juniper optical transport equipment. It exposes configuration and status tables for OCh, OTUk, and ODUk framing layers as well as Tandem Connection Monitoring (TCM) configuration and test/delay-measurement data for ODUk sublayers. Its primary monitoring value is hardware and signal-integrity status of optical transport circuits, including alarm and test conditions on optical channels, transport units, and tandem connection monitoring segments used to detect signal degradation or faults in optical links. As an OTN-specific module it builds on general Juniper interface conventions and is used alongside standard interface MIBs like IF-MIB for ifIndex correlation. It is deployed in service-provider and carrier networks running Juniper routers/switches with OTN-capable optical transport interfaces, where JUNIPER-IFOTN-MIB SNMP monitoring tracks signal integrity across the OCh/OTUk/ODUk hierarchy.
IPNetwork Monitor allows you to monitor SNMP objects defined in JUNIPER-IFOTN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Juniper Networks optical transport routers
- Juniper Networks OTN-capable line cards
Monitoring Examples
An administrator would poll jnxIfOtnOChCfgTable and jnxIfOtnOTUkCfgTable to check optical channel and OTU framing configuration per interface, and jnxIfOtnODUkCfgTable together with jnxIfOtnODUkTcmDMTable to review Tandem Connection Monitoring delay-measurement results for a given ODUk path. Anomalies in jnxIfOtnODUkTcmTestTable entries (such as failed test states) would reveal a degraded or faulty tandem connection segment on the optical transport path. The module also documents deprecated OCh2 tables and entries, indicating some legacy objects are retained only for backward compatibility.
What Can Be Monitored
- OCh configuration status
- OTUk framing configuration
- ODUk configuration
- tandem connection monitoring (TCM) configuration
- ODUk TCM test results
- ODUk TCM delay measurements
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| ifDescr | OBJECT-TYPE |
| ifIndex | OBJECT-TYPE |
From JNX-OPT-IF-EXT-MIB
| JnxoptIfOTNOChAlarms | |
| JnxoptIfOTNODUkTcmAlarms |
From JUNIPER-SMI
| jnxIfOtnMibRoot | OBJECT-IDENTITY |
| jnxIfOtnNotifications | OBJECT-IDENTITY |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| jnxIfOtnMib | 1.3.6.1.4.1.2636.3.70.1 | Deprecated OCh2 tables and entries | ||
| jnxIfOtn | 1.3.6.1.4.1.2636.3.70.1.1 | |||
| jnxIfOtnOChCfgTable | 1.3.6.1.4.1.2636.3.70.1.1.1 | not-accessible | Information about the Otn OCh Config Table. | |
| jnxIfOtnOChCfgEntry | 1.3.6.1.4.1.2636.3.70.1.1.1.1 | not-accessible | A conceptual row that contains of the Otn OCh Config Table. | |
| I32 jnxIfOtnOChCfgContainerIndex | 1.3.6.1.4.1.2636.3.70.1.1.1.1.1 | Integer32 | not-accessible | The associated jnxContentsContainerIndex - eg shelf.. |
| I32 jnxIfOtnOChCfgL1Index | 1.3.6.1.4.1.2636.3.70.1.1.1.1.2 | Integer32 | not-accessible | The level one index associated with this subject ... eg fpc slot. |
| I32 jnxIfOtnOChCfgL2Index | 1.3.6.1.4.1.2636.3.70.1.1.1.1.3 | Integer32 | not-accessible | The level two index associated with this subject .. eg pic slot. |
| I32 jnxIfOtnOChCfgL3Index | 1.3.6.1.4.1.2636.3.70.1.1.1.1.4 | Integer32 | not-accessible | The level three index associated with this subject.. eg port. |
| T/F jnxIfOtnLocalLoopback | 1.3.6.1.4.1.2636.3.70.1.1.1.1.5 | TruthValue | read-write | This is the local loopback at the Line (after the optics). |
| T/F jnxIfOtnLineLoopback | 1.3.6.1.4.1.2636.3.70.1.1.1.1.6 | TruthValue | read-write | This is the line loopback at the Line. |
| T/F jnxIfOtnPayloadLoopback | 1.3.6.1.4.1.2636.3.70.1.1.1.1.7 | TruthValue | read-write | This is the Payload loopback before the optics. |
| JNX jnxIfOtnAdminState | 1.3.6.1.4.1.2636.3.70.1.1.1.1.8 | JnxIfAdminStates | read-write | The Admin state of this interface |
| JNX jnxIfOtnOperState | 1.3.6.1.4.1.2636.3.70.1.1.1.1.9 | JnxIfOperStates | read-only | The operational state of this interface |
| U32 jnxIfOtnIndex | 1.3.6.1.4.1.2636.3.70.1.1.1.1.10 | Unsigned32 | read-only | The interface ifIndex of this interface |
| BIT jnxIfOtnOChStatus | 1.3.6.1.4.1.2636.3.70.1.1.1.1.11 | Bits | read-only | The interface status at the OCh layer. |
| U32 jnxIfOtnOChPortMode | 1.3.6.1.4.1.2636.3.70.1.1.1.1.12 | Unsigned32 | read-only | The Port Mode for this interface 0 - default (not applicable) 1 - lan 2 - wan 3 - gfp |
| jnxIfOtnOTUkCfgTable | 1.3.6.1.4.1.2636.3.70.1.1.2 | not-accessible | Information about the Otn OTUk config table. | |
| jnxIfOtnOTUkCfgEntry | 1.3.6.1.4.1.2636.3.70.1.1.2.1 | not-accessible | A conceptual row that contains the Otn OTUk config table. | |
| I32 jnxIfOtnOTUkCfgContainerIndex | 1.3.6.1.4.1.2636.3.70.1.1.2.1.1 | Integer32 | not-accessible | The associated jnxContentsContainerIndex - eg shelf. |
| I32 jnxIfOtnOTUkCfgL1Index | 1.3.6.1.4.1.2636.3.70.1.1.2.1.2 | Integer32 | not-accessible | The level one index associated with this subject ... eg fpc slot. |
| I32 jnxIfOtnOTUkCfgL2Index | 1.3.6.1.4.1.2636.3.70.1.1.2.1.3 | Integer32 | not-accessible | The level two index associated with this subject .. eg pic slot. |
| I32 jnxIfOtnOTUkCfgL3Index | 1.3.6.1.4.1.2636.3.70.1.1.2.1.4 | Integer32 | not-accessible | The level three index associated with this subject.. eg port. |
| JNX jnxIfOtnOTUkCfgRate | 1.3.6.1.4.1.2636.3.70.1.1.2.1.5 | JnxIfOtnRate | read-write | This is the rate for the interface and the rates depend on the interface/fru type. |
| JNX jnxIfOtnOTUkCfgFecMode | 1.3.6.1.4.1.2636.3.70.1.1.2.1.6 | JnxIfOtnFecType | read-write | This is the Fec type in the OTU frame and the selection depends on the interface/fru type. |
| T/F jnxIfOtnOTUkEnableAutoFrrByteInsert | 1.3.6.1.4.1.2636.3.70.1.1.2.1.7 | TruthValue | read-write | This will enable/disable the automatic insertion of the frr SF/SD byte in the overhead bytes(RES) |
| T/F jnxIfOtnOTUkEnableBERFrrSupport | 1.3.6.1.4.1.2636.3.70.1.1.2.1.8 | TruthValue | read-write | This will enable/disable the FRR support for BER |
| I32 jnxIfOtnOTUkPreFecBERThresholdMantissa | 1.3.6.1.4.1.2636.3.70.1.1.2.1.9 | Integer32 | read-write | This will set the BER threshold(mantissa), which when crossed will trigger Signal Degrade. |
| I32 jnxIfOtnOTUkPreFecBERThresholdExponent | 1.3.6.1.4.1.2636.3.70.1.1.2.1.10 | Integer32 | read-write | This will set the BER threshold(exponent), which when crossed will trigger Signal Degrade. |
| I32 jnxIfOtnOTUkPreFecBERThresholdTime | 1.3.6.1.4.1.2636.3.70.1.1.2.1.11 | Integer32 | read-write | The collection times (1ms - 1sec) to calculate the BER. |
| T/F jnxIfOtnOTUkTIMActEnabled | 1.3.6.1.4.1.2636.3.70.1.1.2.1.12 | TruthValue | read-write | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. The default value of this object is false(2). |
| OCT jnxIfOtnOTUkTxTTI | 1.3.6.1.4.1.2636.3.70.1.1.2.1.13 | OCTET STRING | read-write | The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined |
| OCT jnxIfOtnOTUkRxTTI | 1.3.6.1.4.1.2636.3.70.1.1.2.1.14 | OCTET STRING | read-only | The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined |
| OCT jnxIfOtnOTUkExpectedRxSapi | 1.3.6.1.4.1.2636.3.70.1.1.2.1.15 | OCTET STRING | read-write | Expected receive SAPI. |
| OCT jnxIfOtnOTUkExpectedRxDapi | 1.3.6.1.4.1.2636.3.70.1.1.2.1.16 | OCTET STRING | read-write | Expected receive DAPI. |
| BIT jnxIfOtnOTUkStatus | 1.3.6.1.4.1.2636.3.70.1.1.2.1.17 | Bits | read-only | The interface status at the OTUk layer. |
| I32 jnxIfOtnOTUkPreFecBERThresholdClearMantissa | 1.3.6.1.4.1.2636.3.70.1.1.2.1.18 | Integer32 | read-write | This will set the BER threshold(mantissa) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold error count. |
| I32 jnxIfOtnOTUkPreFecBERThresholdClearExponent | 1.3.6.1.4.1.2636.3.70.1.1.2.1.19 | Integer32 | read-write | This will set the BER threshold(exponent) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold error count. |
| jnxIfOtnODUkCfgTable | 1.3.6.1.4.1.2636.3.70.1.1.3 | not-accessible | Information about the Otn ODUk config table. | |
| jnxIfOtnODUkCfgEntry | 1.3.6.1.4.1.2636.3.70.1.1.3.1 | not-accessible | A conceptual row that contains information about the Otn ODUk config. | |
| I32 jnxIfOtnODUkCfgContainerIndex | 1.3.6.1.4.1.2636.3.70.1.1.3.1.1 | Integer32 | not-accessible | The associated jnxContentsContainerIndex - eg shelf.. |
| I32 jnxIfOtnODUkCfgL1Index | 1.3.6.1.4.1.2636.3.70.1.1.3.1.2 | Integer32 | not-accessible | The level one index associated with this subject ... eg fpc slot. |
| I32 jnxIfOtnODUkCfgL2Index | 1.3.6.1.4.1.2636.3.70.1.1.3.1.3 | Integer32 | not-accessible | The level two index associated with this subject .. eg pic slot. |
| I32 jnxIfOtnODUkCfgL3Index | 1.3.6.1.4.1.2636.3.70.1.1.3.1.4 | Integer32 | not-accessible | The level three index associated with this subject.. eg port. |
| I32 jnxIfOtnODUkAPSPCC0 | 1.3.6.1.4.1.2636.3.70.1.1.3.1.5 | Integer32 | read-write | Read/Write APS PCC byte 0 for this ODUk only. |
| I32 jnxIfOtnODUkAPSPCC1 | 1.3.6.1.4.1.2636.3.70.1.1.3.1.6 | Integer32 | read-write | Read/Write APS PCC byte 1 for this ODUk only. |
| I32 jnxIfOtnODUkAPSPCC2 | 1.3.6.1.4.1.2636.3.70.1.1.3.1.7 | Integer32 | read-write | Read/Write APS PCC byte 2 for this ODUk only. |
| I32 jnxIfOtnODUkAPSPCC3 | 1.3.6.1.4.1.2636.3.70.1.1.3.1.8 | Integer32 | read-write | Read/Write APS PCC byte 3 for this ODUk only. |
| I32 jnxIfOtnODUkPayloadType | 1.3.6.1.4.1.2636.3.70.1.1.3.1.9 | Integer32 | read-write | Read/Write Payload Type for ODUk only. |
| T/F jnxIfOtnODUkTIMActEnabled | 1.3.6.1.4.1.2636.3.70.1.1.3.1.10 | TruthValue | read-write | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. The default value of this object is false(2). |
| OCT jnxIfOtnODUkTxTTI | 1.3.6.1.4.1.2636.3.70.1.1.3.1.11 | OCTET STRING | read-write | The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer. |
| OCT jnxIfOtnODUkRxTTI | 1.3.6.1.4.1.2636.3.70.1.1.3.1.12 | OCTET STRING | read-only | The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer. |
| OCT jnxIfOtnODUkExpectedRxSapi | 1.3.6.1.4.1.2636.3.70.1.1.3.1.13 | OCTET STRING | read-write | Expected receive SAPI for this layer. |
| OCT jnxIfOtnODUkExpectedRxDapi | 1.3.6.1.4.1.2636.3.70.1.1.3.1.14 | OCTET STRING | read-write | Expected receive DAPI for this layer. |
| BIT jnxIfOtnODUkStatus | 1.3.6.1.4.1.2636.3.70.1.1.3.1.15 | Bits | read-only | The status at the ODUk layer Only some of these alarms are valid for the TCM layer |
| I32 jnxIfOtnODUkRxPayloadType | 1.3.6.1.4.1.2636.3.70.1.1.3.1.16 | Integer32 | read-only | Receive Payload Type for ODUk only. |
| jnxIfOtnTcmCfgTable | 1.3.6.1.4.1.2636.3.70.1.1.4 | not-accessible | Information about the Otn TCM config table. | |
| jnxIfOtnTcmCfgEntry | 1.3.6.1.4.1.2636.3.70.1.1.4.1 | not-accessible | A conceptual row that contains information about the Otn Tcm config. | |
| I32 jnxIfOtnTcmCfgContainerIndex | 1.3.6.1.4.1.2636.3.70.1.1.4.1.1 | Integer32 | not-accessible | The associated jnxContentsContainerIndex - eg shelf. |
| I32 jnxIfOtnTcmCfgL1Index | 1.3.6.1.4.1.2636.3.70.1.1.4.1.2 | Integer32 | not-accessible | The level one index associated with this subject ... eg fpc slot. |
| I32 jnxIfOtnTcmCfgL2Index | 1.3.6.1.4.1.2636.3.70.1.1.4.1.3 | Integer32 | not-accessible | The level two index associated with this subject .. eg pic slot. |
| I32 jnxIfOtnTcmCfgL3Index | 1.3.6.1.4.1.2636.3.70.1.1.4.1.4 | Integer32 | not-accessible | The level three index associated with this subject.. eg port. |
| I32 jnxIfOtnTcmCfgLevel | 1.3.6.1.4.1.2636.3.70.1.1.4.1.5 | Integer32 | not-accessible | The TCM level for the Table |
| T/F jnxIfOtnTCMEnable | 1.3.6.1.4.1.2636.3.70.1.1.4.1.6 | TruthValue | read-write | Enable this TCM layer (only for TCM layers) |
| OCT jnxIfOtnTcmTxTTI | 1.3.6.1.4.1.2636.3.70.1.1.4.1.7 | OCTET STRING | read-write | The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer. |
| OCT jnxIfOtnTcmRxTTI | 1.3.6.1.4.1.2636.3.70.1.1.4.1.8 | OCTET STRING | read-only | The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer. |
| OCT jnxIfOtnTcmExpectedRxSapi | 1.3.6.1.4.1.2636.3.70.1.1.4.1.9 | OCTET STRING | read-write | Expected receive SAPI for this layer. |
| OCT jnxIfOtnTcmExpectedRxDapi | 1.3.6.1.4.1.2636.3.70.1.1.4.1.10 | OCTET STRING | read-write | Expected receive DAPI for this layer. |
| BIT jnxIfOtnTcmStatus | 1.3.6.1.4.1.2636.3.70.1.1.4.1.11 | Bits | read-only | The status at the TCM layer. |
| jnxIfOtnODUkTcmTestTable | 1.3.6.1.4.1.2636.3.70.1.1.5 | not-accessible | Information about the Otn ODUk Test function table. | |
| jnxIfOtnODUkTcmTestEntry | 1.3.6.1.4.1.2636.3.70.1.1.5.1 | not-accessible | A conceptual row that contains information about the Otn ODUk Test function. | |
| JNX jnxIfOtnODUkTcmTestLayer | 1.3.6.1.4.1.2636.3.70.1.1.5.1.1 | JnxIfOtnLayer | not-accessible | The layer OTU/ODU/TCM layer for the alarm |
| I32 jnxIfOtnODUkTcmTestTCMLevel | 1.3.6.1.4.1.2636.3.70.1.1.5.1.2 | Integer32 | not-accessible | For ODUk will be this will be 0 If layer is TCM then this will give the TCM level 1..6. |
| T/F jnxIfOtnODUkTcmInsertAis | 1.3.6.1.4.1.2636.3.70.1.1.5.1.3 | TruthValue | read-write | Insert ODU Ais into OTN stream. |
| T/F jnxIfOtnODUkTcmInsertLck | 1.3.6.1.4.1.2636.3.70.1.1.5.1.4 | TruthValue | read-write | Insert ODU Lck into OTN stream. |
| T/F jnxIfOtnODUkTcmInsertOci | 1.3.6.1.4.1.2636.3.70.1.1.5.1.5 | TruthValue | read-write | Insert ODU Oci into OTN stream. |
| T/F jnxIfOtnODUkPayloadPRBS | 1.3.6.1.4.1.2636.3.70.1.1.5.1.6 | TruthValue | read-write | Insert Payload PRBS, For ODUK layer and TCM level is 0. |
| OCT jnxIfOtnODUkPayloadPRBSResult | 1.3.6.1.4.1.2636.3.70.1.1.5.1.7 | OCTET STRING | read-only | Result of the Payload PRBS . |
| jnxIfOtnODUkTcmDMTable | 1.3.6.1.4.1.2636.3.70.1.1.6 | not-accessible | Table for Otn ODUk/TCM Delay Measurement config table. | |
| jnxIfOtnODUkTcmDMEntry | 1.3.6.1.4.1.2636.3.70.1.1.6.1 | not-accessible | A conceptual row that contains information about the Delay Measurement test table. | |
| JNX jnxIfOtnODUkTcmDMLayer | 1.3.6.1.4.1.2636.3.70.1.1.6.1.1 | JnxIfOtnLayer | not-accessible | The layer OTU/ODU/TCM layer for the alarm |
| I32 jnxIfOtnODUkTcmDMLevel | 1.3.6.1.4.1.2636.3.70.1.1.6.1.2 | Integer32 | not-accessible | For ODUk will be this will be 0 If layer is TCM then this will give the TCM level 1..6. |
| T/F jnxIfOtnDMConnectionMonitoringEndpoint | 1.3.6.1.4.1.2636.3.70.1.1.6.1.3 | TruthValue | read-write | Originate Connection Monitoring Endpoint for the Delay Measurement |
| T/F jnxIfOtnDMBypass | 1.3.6.1.4.1.2636.3.70.1.1.6.1.4 | TruthValue | read-write | Act as tandem, passing Dm value through node |
| I32 jnxIfOtnDMPersistFrames | 1.3.6.1.4.1.2636.3.70.1.1.6.1.5 | Integer32 | read-write | Number of consequtive frames required to declare Dm Complete |
| T/F jnxIfOtnDMEnable | 1.3.6.1.4.1.2636.3.70.1.1.6.1.6 | TruthValue | read-write | Start/Stop the DM measurement |
| I32 jnxIfOtnNotificationTrigDefaultHoldtimeUp | 1.3.6.1.4.1.2636.3.70.1.1.7 | Integer32 | read-write | This object will indicate the time (ms) for the defect to persist before it is declared an alarm. |
| I32 jnxIfOtnNotificationTrigDefaultHoldtimeDown | 1.3.6.1.4.1.2636.3.70.1.1.8 | Integer32 | read-write | This object will indicate the time (ms) for the defect to absent before the alarm is cleared. |
| jnxIfOtnNotificationTrigTable | 1.3.6.1.4.1.2636.3.70.1.1.9 | not-accessible | Information about the otn Alarm/Alart/Info trigger table. | |
| jnxIfOtnNotificationTrigEntry | 1.3.6.1.4.1.2636.3.70.1.1.9.1 | not-accessible | A conceptual row that contains information about the Otn Alarm Trigger Table. | |
| I32 jnxIfOtnNotificationTrigContainerIndex | 1.3.6.1.4.1.2636.3.70.1.1.9.1.1 | Integer32 | not-accessible | The associated jnxContentsContainerIndex - eg shelf. |
| I32 jnxIfOtnNotificationTrigL1Index | 1.3.6.1.4.1.2636.3.70.1.1.9.1.2 | Integer32 | not-accessible | The level one index associated with this subject ... eg fpc slot. |
| I32 jnxIfOtnNotificationTrigL2Index | 1.3.6.1.4.1.2636.3.70.1.1.9.1.3 | Integer32 | not-accessible | The level two index associated with this subject .. eg pic slot. |
| I32 jnxIfOtnNotificationTrigL3Index | 1.3.6.1.4.1.2636.3.70.1.1.9.1.4 | Integer32 | not-accessible | The level three index associated with this subject.. eg port. |
| JNX jnxIfOtnNotificationTrigLayer | 1.3.6.1.4.1.2636.3.70.1.1.9.1.5 | JnxIfOtnLayer | not-accessible | The layer OTU/ODU/TCM layer for the alarm |
| I32 jnxIfOtnNotificationTrigTCMLevel | 1.3.6.1.4.1.2636.3.70.1.1.9.1.6 | Integer32 | not-accessible | For OCh/OTUk/ODUk will be this will be 0 If layer is TCM then this will give the TCM level 1..6. |
| I32 jnxIfOtnNotificationTrigAlmId | 1.3.6.1.4.1.2636.3.70.1.1.9.1.7 | Integer32 | not-accessible | This will be the ID of Alarm for that layer 'JnxoptIfOTNOChAlarms'/'JnxoptIfOTNODUkTcmAlarms'. |
| JNX jnxIfOtnNotificationTrigSeverity | 1.3.6.1.4.1.2636.3.70.1.1.9.1.8 | JnxIfOtnSeverity | read-write | This will be the Severity of the Notification for that layer. |
| T/F jnxIfOtnNotificationTrigIgnore | 1.3.6.1.4.1.2636.3.70.1.1.9.1.9 | TruthValue | read-write | This object will ignore the alarm when set. |
| I32 jnxIfOtnNotificationTrigHoldtimeUp | 1.3.6.1.4.1.2636.3.70.1.1.9.1.10 | Integer32 | read-write | This object will indicate the time (ms) for the defect to persist before it is declared an alarm. |
| I32 jnxIfOtnNotificationTrigHoldtimeDown | 1.3.6.1.4.1.2636.3.70.1.1.9.1.11 | Integer32 | read-write | This object will indicate the time (ms) for the defect is absent before the alarm is cleared. |
| JNX jnxIfOtnTrigServiceStateAction | 1.3.6.1.4.1.2636.3.70.1.1.9.1.12 | JnxIfOtnServiceStateAction | read-only | This will indicate whether this alarm is service affecting or not . |
| T/F jnxOtnClearAllPMs | 1.3.6.1.4.1.2636.3.70.1.1.10 | TruthValue | read-write | To clear all Performance monitoring counters on OTN interfaces |
| T/F jnxOtnClearInterfacePMs | 1.3.6.1.4.1.2636.3.70.1.1.11 | TruthValue | read-write | To clear all Performance monitoring counters on this OTN interfaces |
| T/F jnxOtnClearInterfaceCurrentPM | 1.3.6.1.4.1.2636.3.70.1.1.12 | TruthValue | read-write | To clear the current Performance monitoring counters on this OTN interfaces |
| jnxOtnClearIfPMsTable | 1.3.6.1.4.1.2636.3.70.1.1.13 | not-accessible | To clear OTN Performance monitoring counters on this OTN interfaces | |
| jnxOtnClearIfPMsEntry | 1.3.6.1.4.1.2636.3.70.1.1.13.1 | not-accessible | A conceptual row that s used to clear the OTN PM Table. | |
| T/F jnxOtnClearCurrent | 1.3.6.1.4.1.2636.3.70.1.1.13.1.1 | TruthValue | read-write | 1- to clear all the current OTN PM's for this interface |
| T/F jnxOtnClearInterfaceInterval | 1.3.6.1.4.1.2636.3.70.1.1.13.1.2 | TruthValue | read-write | 1- to clear all the OTN PM's intervals(1-96) for this interface |
| T/F jnxOtnClearInterfaceDay | 1.3.6.1.4.1.2636.3.70.1.1.13.1.3 | TruthValue | read-write | 1 - to clear all the Current Day and Previous Day OTN PM's for this interface |
| T/F jnxOtnClearInterfaceAll | 1.3.6.1.4.1.2636.3.70.1.1.13.1.4 | TruthValue | read-write | 1 - to clear all the OTN PM's for this interface |
| jnxIfOtnOCh2 | 1.3.6.1.4.1.2636.3.70.1.2 | |||
| jnxIfOtnOCh2CfgTable | 1.3.6.1.4.1.2636.3.70.1.2.1 | not-accessible | Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the Otn OCh2 Config Table. | |
| jnxIfOtnOCh2CfgEntry | 1.3.6.1.4.1.2636.3.70.1.2.1.1 | not-accessible | A conceptual row that contains of the Otn OCh2 Config Table. | |
| I32 jnxIfOtnOCh2CfgContainerIndex | 1.3.6.1.4.1.2636.3.70.1.2.1.1.1 | Integer32 | not-accessible | Container Index associated with the object instance. |
| I32 jnxIfOtnOCh2CfgL1Index | 1.3.6.1.4.1.2636.3.70.1.2.1.1.2 | Integer32 | not-accessible | FPC slot number of the interface. |
| I32 jnxIfOtnOCh2CfgL2Index | 1.3.6.1.4.1.2636.3.70.1.2.1.1.3 | Integer32 | not-accessible | PIC slot number of the interface. |
| I32 jnxIfOtnOCh2CfgL3Index | 1.3.6.1.4.1.2636.3.70.1.2.1.1.4 | Integer32 | not-accessible | Port number of the interface. |
| I32 jnxIfOtnOCh2CfgL4Index | 1.3.6.1.4.1.2636.3.70.1.2.1.1.5 | Integer32 | not-accessible | Sub-Port number of the interface. |
| T/F jnxIfOtnOCh2LocalLoopback | 1.3.6.1.4.1.2636.3.70.1.2.1.1.6 | TruthValue | read-write | This is the local loopback at the Line (after the optics). |
| T/F jnxIfOtnOCh2LineLoopback | 1.3.6.1.4.1.2636.3.70.1.2.1.1.7 | TruthValue | read-write | This is the line loopback at the Line. |
| T/F jnxIfOtnOCh2PayloadLoopback | 1.3.6.1.4.1.2636.3.70.1.2.1.1.8 | TruthValue | read-write | This is the Payload loopback before the optics. |
| JNX jnxIfOtnOCh2AdminState | 1.3.6.1.4.1.2636.3.70.1.2.1.1.9 | JnxIfAdminStates | read-write | The Admin state of this interface |
| JNX jnxIfOtnOCh2OperState | 1.3.6.1.4.1.2636.3.70.1.2.1.1.10 | JnxIfOperStates | read-only | The operational state of this interface |
| U32 jnxIfOtnOCh2Index | 1.3.6.1.4.1.2636.3.70.1.2.1.1.11 | Unsigned32 | read-only | The interface ifIndex of this interface |
| BIT jnxIfOtnOCh2Status | 1.3.6.1.4.1.2636.3.70.1.2.1.1.12 | Bits | read-only | The interface status at the OCh layer. |
| U32 jnxIfOtnOCh2PortMode | 1.3.6.1.4.1.2636.3.70.1.2.1.1.13 | Unsigned32 | read-only | The Port Mode for this interface 0 - default (not applicable) 1 - lan 2 - wan 3 - gfp |
| jnxIfOtnOCh2OTUkCfgTable | 1.3.6.1.4.1.2636.3.70.1.2.2 | not-accessible | Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the Otn OCh2 OTUk config table. | |
| jnxIfOtnOCh2OTUkCfgEntry | 1.3.6.1.4.1.2636.3.70.1.2.2.1 | not-accessible | A conceptual row that contains the Otn OCh2 OTUk config table. | |
| I32 jnxIfOtnOCh2OTUkCfgContIndx | 1.3.6.1.4.1.2636.3.70.1.2.2.1.1 | Integer32 | not-accessible | Container Index associated with the object instance. |
| I32 jnxIfOtnOCh2OTUkCfgL1Index | 1.3.6.1.4.1.2636.3.70.1.2.2.1.2 | Integer32 | not-accessible | FPC slot number of the interface. |
| I32 jnxIfOtnOCh2OTUkCfgL2Index | 1.3.6.1.4.1.2636.3.70.1.2.2.1.3 | Integer32 | not-accessible | PIC slot number of the interface. |
| I32 jnxIfOtnOCh2OTUkCfgL3Index | 1.3.6.1.4.1.2636.3.70.1.2.2.1.4 | Integer32 | not-accessible | Port number of the interface. |
| I32 jnxIfOtnOCh2OTUkCfgL4Index | 1.3.6.1.4.1.2636.3.70.1.2.2.1.5 | Integer32 | not-accessible | Port number of the interface. |
| JNX jnxIfOtnOCh2OTUkCfgRate | 1.3.6.1.4.1.2636.3.70.1.2.2.1.6 | JnxIfOtnRate | read-write | This is the rate for the interface and the rates depend on the interface/fru type. |
| JNX jnxIfOtnOCh2OTUkCfgFecMode | 1.3.6.1.4.1.2636.3.70.1.2.2.1.7 | JnxIfOtnFecType | read-write | This is the Fec type in the OTU frame and the selection depends on the interface/fru type. |
| T/F jnxIfOtnOCh2OTUkEnAutoFrrByteIns | 1.3.6.1.4.1.2636.3.70.1.2.2.1.8 | TruthValue | read-write | This will enable/disable the automatic insertion of the frr SF/SD byte in the overhead bytes(RES) |
| T/F jnxIfOtnOCh2OTUkEnBERFrrSupport | 1.3.6.1.4.1.2636.3.70.1.2.2.1.9 | TruthValue | read-write | This will enable/disable the FRR support for BER |
| I32 jnxIfOtnOCh2OTUkPreFecBERThMant | 1.3.6.1.4.1.2636.3.70.1.2.2.1.10 | Integer32 | read-write | This will set the BER threshold(mantissa), which when crossed will trigger Signal Degrade. |
| I32 jnxIfOtnOCh2OTUkPreFecBERThExpo | 1.3.6.1.4.1.2636.3.70.1.2.2.1.11 | Integer32 | read-write | This will set the BER threshold(exponent), which when crossed will trigger Signal Degrade. |
| I32 jnxIfOtnOCh2OTUkPreFecBERThTime | 1.3.6.1.4.1.2636.3.70.1.2.2.1.12 | Integer32 | read-write | The collection times (1ms - 1sec) to calculate the BER. |
| T/F jnxIfOtnOCh2OTUkTIMActEnabled | 1.3.6.1.4.1.2636.3.70.1.2.2.1.13 | TruthValue | read-write | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. The default value of this object is false(2). |
| OCT jnxIfOtnOCh2OTUkTxTTI | 1.3.6.1.4.1.2636.3.70.1.2.2.1.14 | OCTET STRING | read-write | The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined |
| OCT jnxIfOtnOCh2OTUkRxTTI | 1.3.6.1.4.1.2636.3.70.1.2.2.1.15 | OCTET STRING | read-only | The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined |
| OCT jnxIfOtnOCh2OTUkExpectedRxSapi | 1.3.6.1.4.1.2636.3.70.1.2.2.1.16 | OCTET STRING | read-write | Expected receive SAPI. |
| OCT jnxIfOtnOCh2OTUkExpectedRxDapi | 1.3.6.1.4.1.2636.3.70.1.2.2.1.17 | OCTET STRING | read-write | Expected receive DAPI. |
| BIT jnxIfOtnOCh2OTUkStatus | 1.3.6.1.4.1.2636.3.70.1.2.2.1.18 | Bits | read-only | The interface status at the OTUk layer. |
| I32 jnxIfOtnOCh2OTUkPreFecBERThClrMn | 1.3.6.1.4.1.2636.3.70.1.2.2.1.19 | Integer32 | read-write | This will set the BER threshold(mantissa) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold error count. |
| I32 jnxIfOtnOCh2OTUkPreFecBERThClrEx | 1.3.6.1.4.1.2636.3.70.1.2.2.1.20 | Integer32 | read-write | This will set the BER threshold(exponent) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold error count. |
| jnxIfOtnOCh2ODUkCfgTable | 1.3.6.1.4.1.2636.3.70.1.2.3 | not-accessible | Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the Otn ODUk config table. | |
| jnxIfOtnOCh2ODUkCfgEntry | 1.3.6.1.4.1.2636.3.70.1.2.3.1 | not-accessible | A conceptual row that contains information about the Otn ODUk config. | |
| I32 jnxIfOtnOCh2ODUkCfgContIndx | 1.3.6.1.4.1.2636.3.70.1.2.3.1.1 | Integer32 | not-accessible | Container Index associated with the Object Instance. |
| I32 jnxIfOtnOCh2ODUkCfgL1Index | 1.3.6.1.4.1.2636.3.70.1.2.3.1.2 | Integer32 | not-accessible | FPC slot number of the interface. |
| I32 jnxIfOtnOCh2ODUkCfgL2Index | 1.3.6.1.4.1.2636.3.70.1.2.3.1.3 | Integer32 | not-accessible | PIC slot number of the interface. |
| I32 jnxIfOtnOCh2ODUkCfgL3Index | 1.3.6.1.4.1.2636.3.70.1.2.3.1.4 | Integer32 | not-accessible | Port number of the interface. |
| I32 jnxIfOtnOCh2ODUkCfgL4Index | 1.3.6.1.4.1.2636.3.70.1.2.3.1.5 | Integer32 | not-accessible | Sub-Port number of the interface. |
| I32 jnxIfOtnOCh2ODUkAPSPCC0 | 1.3.6.1.4.1.2636.3.70.1.2.3.1.6 | Integer32 | read-write | Read/Write APS PCC byte 0 for this ODUk only. |
| I32 jnxIfOtnOCh2ODUkAPSPCC1 | 1.3.6.1.4.1.2636.3.70.1.2.3.1.7 | Integer32 | read-write | Read/Write APS PCC byte 1 for this ODUk only. |
| I32 jnxIfOtnOCh2ODUkAPSPCC2 | 1.3.6.1.4.1.2636.3.70.1.2.3.1.8 | Integer32 | read-write | Read/Write APS PCC byte 2 for this ODUk only. |
| I32 jnxIfOtnOCh2ODUkAPSPCC3 | 1.3.6.1.4.1.2636.3.70.1.2.3.1.9 | Integer32 | read-write | Read/Write APS PCC byte 3 for this ODUk only. |
| I32 jnxIfOtnOCh2ODUkPayloadType | 1.3.6.1.4.1.2636.3.70.1.2.3.1.10 | Integer32 | read-write | Read/Write Payload Type for ODUk only. |
| T/F jnxIfOtnOCh2ODUkTIMActEnabled | 1.3.6.1.4.1.2636.3.70.1.2.3.1.11 | TruthValue | read-write | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. The default value of this object is false(2). |
| OCT jnxIfOtnOCh2ODUkTxTTI | 1.3.6.1.4.1.2636.3.70.1.2.3.1.12 | OCTET STRING | read-write | The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer. |
| OCT jnxIfOtnOCh2ODUkRxTTI | 1.3.6.1.4.1.2636.3.70.1.2.3.1.13 | OCTET STRING | read-only | The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer. |
| OCT jnxIfOtnOCh2ODUkExpectedRxSapi | 1.3.6.1.4.1.2636.3.70.1.2.3.1.14 | OCTET STRING | read-write | Expected receive SAPI for this layer. |
| OCT jnxIfOtnOCh2ODUkExpectedRxDapi | 1.3.6.1.4.1.2636.3.70.1.2.3.1.15 | OCTET STRING | read-write | Expected receive DAPI for this layer. |
| BIT jnxIfOtnOCh2ODUkStatus | 1.3.6.1.4.1.2636.3.70.1.2.3.1.16 | Bits | read-only | The status at the ODUk layer Only some of these alarms are valid for the TCM layer |
| I32 jnxIfOtnOCh2ODUkRxPayloadType | 1.3.6.1.4.1.2636.3.70.1.2.3.1.17 | Integer32 | read-only | Receive Payload Type for ODUk only. |
| jnxIfOtnOCh2TcmCfgTable | 1.3.6.1.4.1.2636.3.70.1.2.4 | not-accessible | Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the Otn TCM config table. | |
| jnxIfOtnOCh2TcmCfgEntry | 1.3.6.1.4.1.2636.3.70.1.2.4.1 | not-accessible | A conceptual row that contains information about the Otn Tcm config. | |
| I32 jnxIfOtnOCh2TcmCfgContIndx | 1.3.6.1.4.1.2636.3.70.1.2.4.1.1 | Integer32 | not-accessible | Container Index associated with the object. |
| I32 jnxIfOtnOCh2TcmCfgL1Index | 1.3.6.1.4.1.2636.3.70.1.2.4.1.2 | Integer32 | not-accessible | FPC slot number of the interface. |
| I32 jnxIfOtnOCh2TcmCfgL2Index | 1.3.6.1.4.1.2636.3.70.1.2.4.1.3 | Integer32 | not-accessible | PIC slot number of the interface. |
| I32 jnxIfOtnOCh2TcmCfgL3Index | 1.3.6.1.4.1.2636.3.70.1.2.4.1.4 | Integer32 | not-accessible | Port number of the interface. |
| I32 jnxIfOtnOCh2TcmCfgL4Index | 1.3.6.1.4.1.2636.3.70.1.2.4.1.5 | Integer32 | not-accessible | Sub-Port number of the interface. |
| I32 jnxIfOtnOCh2TcmCfgLevel | 1.3.6.1.4.1.2636.3.70.1.2.4.1.6 | Integer32 | not-accessible | The TCM level for the Table |
| T/F jnxIfOtnOCh2TCMEnable | 1.3.6.1.4.1.2636.3.70.1.2.4.1.7 | TruthValue | read-write | Enable this TCM layer (only for TCM layers) |
| OCT jnxIfOtnOCh2TcmTxTTI | 1.3.6.1.4.1.2636.3.70.1.2.4.1.8 | OCTET STRING | read-write | The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer. |
| OCT jnxIfOtnOCh2TcmRxTTI | 1.3.6.1.4.1.2636.3.70.1.2.4.1.9 | OCTET STRING | read-only | The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer. |
| OCT jnxIfOtnOCh2TcmExpectedRxSapi | 1.3.6.1.4.1.2636.3.70.1.2.4.1.10 | OCTET STRING | read-write | Expected receive SAPI for this layer. |
| OCT jnxIfOtnOCh2TcmExpectedRxDapi | 1.3.6.1.4.1.2636.3.70.1.2.4.1.11 | OCTET STRING | read-write | Expected receive DAPI for this layer. |
| BIT jnxIfOtnOCh2TcmStatus | 1.3.6.1.4.1.2636.3.70.1.2.4.1.12 | Bits | read-only | The status at the TCM layer. |
| jnxIfOtnNotificationPrefix | 1.3.6.1.4.1.2636.4.21.0 | |||
| NTF jnxIfOtnNotificationAdminStatus | 1.3.6.1.4.1.2636.4.21.0.1 | Notification of the admin state of the otn interface. | ||
| NTF jnxIfOtnNotificationOperStatus | 1.3.6.1.4.1.2636.4.21.0.2 | Notification of operational state of the otn interface |
RFC description
Manages OTN (Optical Transport Network) interface configuration, alarms, and performance monitoring.
Start monitoring Juniper Networks optical transport router/OTN-capable line card with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.