Unisphere-Data-PPPOE-PROFILE-MIB

All MIBs › Unisphere-Data-PPPOE-PROFILE-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2002-08-15

Category: Juniper/Unisphere Broadband

Description: Manages PPPoE subscriber profile configuration on Juniper/Unisphere ERX broadband access routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Unisphere-Data-PPPOE-PROFILE-MIB?

Unisphere-Data-PPPOE-PROFILE-MIB is a Juniper Networks, Inc. (Unisphere Networks/ERX edge router heritage) proprietary MIB configuring PPPoE subscriber profiles. Its profile table, keyed by ID, records a set-map reference, max session count, subscriber MOTM (Message of the Minute)/URL, duplicate-session protection flag, access-concentrator name, PADI-flag, and packet-trace enable. As a configuration MIB it lets an administrator confirm PPPoE subscriber-profile session limits and messaging on a Juniper (Unisphere/ERX) edge router. It is deployed on Juniper Networks (Unisphere/ERX) edge routers. Engineers can download the Unisphere-Data-PPPOE-PROFILE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Unisphere-Data-PPPOE-PROFILE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks (Unisphere/ERX) edge routers

Monitoring Examples

An administrator checks usdPppoeProfileMaxNumSessions to confirm the session limit configured for a PPPoE subscriber profile on a Juniper (Unisphere ERX) edge router.

What Can Be Monitored

PPPoE subscriber profile session-limit configuration

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString

From Unisphere-Data-MIBs

usDataMibs

MODULE-IDENTITY

From Unisphere-Data-TC

UsdEnable
UsdSetMap

OIDs

OID symbolic	OID numeric	Type	Access	Description
usdPppoeProfileMIB	1.3.6.1.4.1.4874.2.2.46			The point-to-point protocol over Ethernet (PPPoE) profile MIB for the Juniper enterprise.
usdPppoeProfileObjects	1.3.6.1.4.1.4874.2.2.46.1
usdPppoeProfile	1.3.6.1.4.1.4874.2.2.46.1.1
usdPppoeProfileTable	1.3.6.1.4.1.4874.2.2.46.1.1.1		not-accessible	This table contains profiles for configuring PPPoE interfaces/sessions. Entries in this table are created/deleted as a side-effect of corresponding operations to the usdProfileNameTable in the Unisphere-Data-PROFILE-MIB.
usdPppoeProfileEntry	1.3.6.1.4.1.4874.2.2.46.1.1.1.1		not-accessible	A profile describing configuration of a PPPoE interface and its subinterfaces (sessions).
U32 usdPppoeProfileId	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.1	Unsigned32	not-accessible	The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the usdProfileNameTable.
USD usdPppoeProfileSetMap	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.2	UsdSetMap	read-write	A bitmap representing which objects in this entry have been explicitly configured. See the definition of the UsdSetMap TEXTUAL-CONVENTION for details of use. The INDEX object(s) and this object are excluded from representation (i.e. their bits are never set). When a SET request does not explicitly configure UsdSetMap, bits in UsdSetMap are set as a side-effect of configuring other profile attributes in the same entry. If, however, a SET request explicitly configures UsdSetMap, the explicitly configured value overrides 1) any previous bit settings, and 2) any simultaneous 'side-effect' settings that would otherwise occur. Once set, bits can only be cleared by explicitly configuring UsdSetMap.
I32 usdPppoeProfileMaxNumSessions	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.3	Integer32	read-write	The maximum number of PPPoE sessions (subinterfaces) that can be configured on the main PPPoE interface created using this profile. A value of zero indicates no bound is configured.
STR usdPppoeProfileSubMotm	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.4	DisplayString	read-write	A message to send via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub- interface. A client may choose to display this message to the user.
STR usdPppoeProfileSubUrl	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.5	DisplayString	read-write	A URL to be sent via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub-interface. The string entered here can have several substitutions applied: %D is replaced with the profile name %d is replaced with the domain name %u is replaced with the user name %U is replaced with the user/domain name together %% is replaced with the % character The resulting string must not be greater than 127 octets long. The client may use this URL as the initial web-page for the user.
USD usdPppoeProfileDupProtect	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.6	UsdEnable	read-write	Flag to control whether duplicate MAC addresses are allowed
STR usdPppoeProfileAcName	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.7	DisplayString	read-write	The name to use for the AC-NAME tag that is sent in any PADO that is sent on this interface.
USD usdPppoeProfilePadiFlag	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.8	UsdEnable	read-write	The PPPoE major interface parameter PADI flag controls whether to always repsond to a PADI with a PADO regardless of the ability to create the session and allow the session establish phase to resolve it.
USD usdPppoeProfilePacketTrace	1.3.6.1.4.1.4874.2.2.46.1.1.1.1.9	UsdEnable	read-write	The PPPoE major interface parameter packet tracing flag controls whether packet tracing is enable or not.
usdPppoeProfileConformance	1.3.6.1.4.1.4874.2.2.46.4
usdPppoeProfileCompliances	1.3.6.1.4.1.4874.2.2.46.4.1
usdPppoeProfileCompliance	1.3.6.1.4.1.4874.2.2.46.4.1.1			Obsolete compliance statement for entities which implement the Juniper PPPoE Profile MIB. This statement became obsolete when the duplicate MAC address indicator and AC-NAME tag were added.
usdPppoeCompliance2	1.3.6.1.4.1.4874.2.2.46.4.1.2			Obsolete compliance statement for entities which implement the Juniper PPPoE profile MIB. This statement became obsolete when PADI flag, AC-name and packet trace objects were added.
usdPppoeCompliance3	1.3.6.1.4.1.4874.2.2.46.4.1.3			The compliance statement for entities which implement the Juniper PPPoE Profile MIB.
usdPppoeProfileGroups	1.3.6.1.4.1.4874.2.2.46.4.2
usdPppoeProfileGroup	1.3.6.1.4.1.4874.2.2.46.4.2.1			Obsolete collection of objects providing management of profile functionality for PPPoE interfaces in a Juniper product. This group became obsolete when the duplicate MAC address indicator and AC-NAME tag objects were added.
usdPppoeProfileGroup2	1.3.6.1.4.1.4874.2.2.46.4.2.2			Obsolete collection of objects providing management of profile functionality for PPPOE interfaces in a Unisphere product. This group became obsolete when PADI flag, AC-name and packet trace objects were added.
usdPppoeProfileGroup3	1.3.6.1.4.1.4874.2.2.46.4.2.3			A collection of objects providing management of profile functionality for PPPOE interfaces in a Unisphere product.

RFC description

Point-to-Point Protocol over Ethernet (PPPoE) profile configuration for Juniper enterprise routers.

Start monitoring Juniper Networks (Unisphere/ERX) edge routers (PPPoE subscriber-profile session-limit config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Unisphere-Data-PPPOE-PROFILE-MIB

What Is Unisphere-Data-PPPOE-PROFILE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description