All MIBs › JUNIPER-FABRIC-CHASSIS
Organization: Juniper Networks, Inc.
Last Updated: 2012-09-13
Category: Hardware and Environment, Vendor: Juniper
Description: Defines managed objects for fabric chassis monitoring in Juniper Networks QFabric and multi-chassis systems.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is JUNIPER-FABRIC-CHASSIS?
JUNIPER-FABRIC-CHASSIS is a Juniper Networks enterprise MIB representing the hardware components of Juniper's QFabric and other multi-chassis fabric systems, which interconnect many physical nodes into a single logical switching fabric. It exposes an anatomy of scalar and tabular hardware inventory data describing the fabric's constituent components (e.g., director nodes, interconnect devices, node devices) and their identification/status. As a hardware-status MIB it is used to confirm that all fabric components are present, correctly enumerated, and operationally healthy, which is essential in a distributed fabric where a single failed interconnect or node device can silently degrade capacity. It is a Juniper-specific enterprise MIB and typically works alongside JUNIPER-FRU-MIB and generic chassis MIBs to give complete hardware visibility across the fabric. Typical deployment is large data-center QFabric or multi-chassis fabric deployments requiring unified visibility across dozens of physical devices. Engineers can download the JUNIPER-FABRIC-CHASSIS file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in JUNIPER-FABRIC-CHASSIS. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Juniper QFabric system
- Juniper multi-chassis fabric switch
Monitoring Examples
An administrator would walk the jnxFabricAnatomyTables to enumerate all physical components across the fabric and check the jnxFabricAnatomyScalars for fabric-wide summary counts, catching a scenario where a fabric node or interconnect device has disappeared from the inventory, indicating a hardware failure or a communication loss within the fabric. Because sample objects here are limited to top-level scalar/table groupings, specific column-level detail (like per-component status codes) cannot be confirmed from what's provided. This MIB is primarily useful as a fabric-wide hardware inventory and presence check rather than a performance-counter source.
What Can Be Monitored
- fabric component inventory
- fabric-wide summary scalars
- node/interconnect device presence
- fabric hardware anatomy
This MIB depends on
Related MIBs
Imported Objects
From JUNIPER-MIB
| JnxChassisId |
From JUNIPER-SMI
| jnxDcfMibRoot | OBJECT-IDENTITY |
| jnxFabricChassisOKTraps | OBJECT-IDENTITY |
| jnxFabricChassisTraps | OBJECT-IDENTITY |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| TEXTUAL-CONVENTION |
How to Use in IPNetwork Monitor
Example using jnxFabricRedundancySwitchoverCount OID:
Select a Juniper QFabric system / multi-chassis fabric switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type jnxFabricRedundancySwitchoverCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of switchover as perceived by this subject since routing engine is up and running. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| jnxFabricAnatomy | 1.3.6.1.4.1.2636.3.42.2 | The MIB modules representing Juniper Networks' Quantum Fabric hardware components. | ||
| jnxFabricAnatomyScalars | 1.3.6.1.4.1.2636.3.42.2.1 | |||
| OID jnxFabricClass | 1.3.6.1.4.1.2636.3.42.2.1.1 | OBJECT IDENTIFIER | read-only | The product line of the fabric switch. |
| STR jnxFabricDescr | 1.3.6.1.4.1.2636.3.42.2.1.2 | DisplayString | read-only | The name, model, or detailed description of the fabric, indicating which product the fabric is about. |
| STR jnxFabricSerialNo | 1.3.6.1.4.1.2636.3.42.2.1.3 | DisplayString | read-only | The serial number of this subject, blank if unknown or unavailable. |
| STR jnxFabricRevision | 1.3.6.1.4.1.2636.3.42.2.1.4 | DisplayString | read-only | The revision of this subject, blank if unknown or unavailable. |
| STR jnxFabricFirmwareRevision | 1.3.6.1.4.1.2636.3.42.2.1.5 | DisplayString | read-only | The firmware (u-boot) revision of this subject, blank if unknown or unavailable. |
| TIK jnxFabricLastInstalled | 1.3.6.1.4.1.2636.3.42.2.1.6 | TimeTicks | read-only | The value of sysUpTime when the subject was last installed, up-and-running. Zero if unknown or already up-and-running when the agent was up. |
| TIK jnxFabricContentsLastChange | 1.3.6.1.4.1.2636.3.42.2.1.7 | TimeTicks | read-only | The value of sysUpTime when the fabric contents table last changed. Zero if unknown or already existing when the agent was up. |
| TIK jnxFabricFilledLastChange | 1.3.6.1.4.1.2636.3.42.2.1.8 | TimeTicks | read-only | The value of sysUpTime when the fabric filled status table last changed. Zero if unknown or already at that state when the agent was up. |
| jnxFabricAnatomyTables | 1.3.6.1.4.1.2636.3.42.2.2 | |||
| jnxFabricDeviceTable | 1.3.6.1.4.1.2636.3.42.2.2.1 | not-accessible | A list of fabric device entries. | |
| jnxFabricDeviceEntry | 1.3.6.1.4.1.2636.3.42.2.2.1.1 | not-accessible | An entry of fabric device table. | |
| JNX jnxFabricDeviceIndex | 1.3.6.1.4.1.2636.3.42.2.2.1.1.1 | JnxFabricDeviceId | read-only | Identifies the device on which the contents of this row exists. |
| JNX jnxFabricDeviceEntryContainersFamily | 1.3.6.1.4.1.2636.3.42.2.2.1.1.2 | JnxFabricContainersFamily | read-only | The family of container that defines this device. |
| OID jnxFabricDeviceEntryClass | 1.3.6.1.4.1.2636.3.42.2.2.1.1.3 | OBJECT IDENTIFIER | read-only | The productline of the device entry. |
| OID jnxFabricDeviceEntryModel | 1.3.6.1.4.1.2636.3.42.2.2.1.1.4 | OBJECT IDENTIFIER | read-only | The model object identifier of the device entry. |
| STR jnxFabricDeviceEntryDescr | 1.3.6.1.4.1.2636.3.42.2.2.1.1.5 | DisplayString | read-only | The name or detailed description of the device entry. |
| STR jnxFabricDeviceEntrySerialNo | 1.3.6.1.4.1.2636.3.42.2.2.1.1.6 | DisplayString | read-only | The serial number of this subject, blank if unknown or unavailable. |
| STR jnxFabricDeviceEntryName | 1.3.6.1.4.1.2636.3.42.2.2.1.1.7 | DisplayString | read-only | The name of this subject which is same as the serial number unless a device alias has been configured. |
| STR jnxFabricDeviceEntryRevision | 1.3.6.1.4.1.2636.3.42.2.2.1.1.8 | DisplayString | read-only | The revision of this subject, blank if unknown or unavailable. |
| STR jnxFabricDeviceEntryFirmwareRevision | 1.3.6.1.4.1.2636.3.42.2.2.1.1.9 | DisplayString | read-only | The firmware (u-boot) revision of this subject, blank if unknown or unavailable. |
| TIK jnxFabricDeviceEntryInstalled | 1.3.6.1.4.1.2636.3.42.2.2.1.1.10 | TimeTicks | read-only | The value of sysUpTime when the subject was last installed, up-and-running. Zero if unknown or already up-and-running when the agent was up. |
| TIK jnxFabricDeviceEntryContentsLastChange | 1.3.6.1.4.1.2636.3.42.2.2.1.1.11 | TimeTicks | read-only | The value of sysUpTime when the contents table last changed. Zero if unknown or already existing when the agent was up. |
| TIK jnxFabricDeviceEntryFilledLastChange | 1.3.6.1.4.1.2636.3.42.2.2.1.1.12 | TimeTicks | read-only | The value of sysUpTime when the filled status table last changed. Zero if unknown or already at that state when the agent was up. |
| I32 jnxFabricDeviceEntryKernelMemoryUsedPercent | 1.3.6.1.4.1.2636.3.42.2.2.1.1.13 | Integer32 | read-only | The percentage of kernel memory used of this subject. 0 if unavailable or inapplicable. |
| jnxFabricContainersTable | 1.3.6.1.4.1.2636.3.42.2.2.2 | not-accessible | A list of containers entries. | |
| jnxFabricContainersEntry | 1.3.6.1.4.1.2636.3.42.2.2.2.1 | not-accessible | An entry of containers table. Each entry is indexed by the container table type and the container index. | |
| JNX jnxFabricContainersFamily | 1.3.6.1.4.1.2636.3.42.2.2.2.1.1 | JnxFabricContainersFamily | read-only | The family of container. |
| I32 jnxFabricContainersIndex | 1.3.6.1.4.1.2636.3.42.2.2.2.1.2 | Integer32 | read-only | The index for this entry. |
| BIT jnxFabricContainersView | 1.3.6.1.4.1.2636.3.42.2.2.2.1.3 | Bits | read-only | The view(s) from which the specific container appears. This variable indicates that the specific container is embedded and accessible from the corresponding view(s). The value is a bit map represented as a sum. If multiple bits are set, the specified container(s) are located and accessible from that set of views. The various values representing the bit positions and its corresponding views are: 1 front 2 rear 4 top 8 bottom 16 leftHandSide 32 rightHandSide Note 1: LefHandSide and rightHandSide are referred to based on the view from the front. Note 2: If the specified containers are scattered around various views, the numbering is according to the following sequence: front -> rear -> top -> bottom -> leftHandSide -> rightHandSide For each view plane, the numbering sequence is first from left to right, and then from up to down. Note 3: Even though the value in chassis hardware (e.g. slot number) may be labelled from 0, 1, 2, and up, all the indices in MIB start with 1 (not 0) according to network management convention. |
| INT jnxFabricContainersLevel | 1.3.6.1.4.1.2636.3.42.2.2.2.1.4 | INTEGER | read-only | The abstraction level of the chassis or device. It is enumerated from the outside to the inside, from the outer layer to the inner layer. For example, top level (i.e. level 0) refers to chassis frame, level 1 FPC slot within chassis frame, level 2 PIC space within FPC slot. |
| I32 jnxFabricContainersWithin | 1.3.6.1.4.1.2636.3.42.2.2.2.1.5 | Integer32 | read-only | The index of its next higher level container housing this entry. The associated jnxFabricContainersIndex in the jnxFabricContainersTable represents its next higher level container. |
| OID jnxFabricContainersType | 1.3.6.1.4.1.2636.3.42.2.2.2.1.6 | OBJECT IDENTIFIER | read-only | The type of this container. |
| STR jnxFabricContainersDescr | 1.3.6.1.4.1.2636.3.42.2.2.2.1.7 | DisplayString | read-only | The name or detailed description of this subject. |
| I32 jnxFabricContainersCount | 1.3.6.1.4.1.2636.3.42.2.2.2.1.8 | Integer32 | read-only | The maximum number of containers of this level per container of the next higher level. e.g. if there are six level 2 containers in level 1 container, then jnxFabricContainersCount for level 2 is six. |
| jnxFabricContentsTable | 1.3.6.1.4.1.2636.3.42.2.2.3 | not-accessible | A list of contents entries. | |
| jnxFabricContentsEntry | 1.3.6.1.4.1.2636.3.42.2.2.3.1 | not-accessible | An entry of contents table. | |
| I32 jnxFabricContentsContainerIndex | 1.3.6.1.4.1.2636.3.42.2.2.3.1.1 | Integer32 | read-only | The associated jnxFabricContainersIndex in the jnxFabricContainersTable. |
| I32 jnxFabricContentsL1Index | 1.3.6.1.4.1.2636.3.42.2.2.3.1.2 | Integer32 | read-only | The level one index of the container housing this subject. Zero if unavailable or inapplicable. |
| I32 jnxFabricContentsL2Index | 1.3.6.1.4.1.2636.3.42.2.2.3.1.3 | Integer32 | read-only | The level two index of the container housing this subject. Zero if unavailable or inapplicable. |
| I32 jnxFabricContentsL3Index | 1.3.6.1.4.1.2636.3.42.2.2.3.1.4 | Integer32 | read-only | The level three index of the container housing this subject. Zero if unavailable or inapplicable. |
| OID jnxFabricContentsType | 1.3.6.1.4.1.2636.3.42.2.2.3.1.5 | OBJECT IDENTIFIER | read-only | The type of this subject. zeroDotZero if unknown. |
| STR jnxFabricContentsDescr | 1.3.6.1.4.1.2636.3.42.2.2.3.1.6 | DisplayString | read-only | The name or detailed description of this subject. |
| STR jnxFabricContentsSerialNo | 1.3.6.1.4.1.2636.3.42.2.2.3.1.7 | DisplayString | read-only | The serial number of this subject, blank if unknown or unavailable. |
| STR jnxFabricContentsRevision | 1.3.6.1.4.1.2636.3.42.2.2.3.1.8 | DisplayString | read-only | The revision of this subject, blank if unknown or unavailable. |
| TIK jnxFabricContentsInstalled | 1.3.6.1.4.1.2636.3.42.2.2.3.1.9 | TimeTicks | read-only | The value of sysUpTime when the subject was last installed, up-and-running. Zero if unknown or already up-and-running when the agent was up. |
| STR jnxFabricContentsPartNo | 1.3.6.1.4.1.2636.3.42.2.2.3.1.10 | DisplayString | read-only | The part number of this subject, blank if unknown or unavailable. |
| JNX jnxFabricContentsChassisId | 1.3.6.1.4.1.2636.3.42.2.2.3.1.11 | JnxChassisId | read-only | Identifies the chassis on which the contents of this row exists. |
| STR jnxFabricContentsChassisDescr | 1.3.6.1.4.1.2636.3.42.2.2.3.1.12 | DisplayString | read-only | A textual description of the chassis on which the contents of this row exists. |
| STR jnxFabricContentsChassisCleiCode | 1.3.6.1.4.1.2636.3.42.2.2.3.1.13 | DisplayString | read-only | The clei code of this subject, blank if unknown or unavailable. A CLEI code is an intelligent code that consists of 10 alphanumeric characters with 4 data elements. The first data element is considered the basic code with the first 2 characters indicating the technology or equipment type, and the third and fourth characters denoting the functional sub-category. The second data element represents the features, and its three characters denote functional capabilities or changes. The third data element has one character and denotes a reference to a manufacturer, system ID, specification, or drawing. The fourth data element consists of two characters and contains complementary data. These two characters provide a means of differentiating or providing uniqueness between the eight character CLEI codes by identifying the manufacturing vintage of the product. Names are assigned via procedures defined in [GR485]. The assigned maintenance agent for the CLEI code, Telcordia Technologies, is responsible for assigning certain equipment and other identifiers (e.g., location, manufacturer/supplier) for the telecommunications industry. |
| jnxFabricFilledTable | 1.3.6.1.4.1.2636.3.42.2.2.4 | not-accessible | A list of filled status entries. | |
| jnxFabricFilledEntry | 1.3.6.1.4.1.2636.3.42.2.2.4.1 | not-accessible | An entry of filled status table. | |
| I32 jnxFabricFilledContainerIndex | 1.3.6.1.4.1.2636.3.42.2.2.4.1.1 | Integer32 | read-only | The associated jnxFabricContainersIndex in the jnxFabricContainersTable. |
| I32 jnxFabricFilledL1Index | 1.3.6.1.4.1.2636.3.42.2.2.4.1.2 | Integer32 | read-only | The level one index of the container housing this subject. Zero if unavailable or inapplicable. |
| I32 jnxFabricFilledL2Index | 1.3.6.1.4.1.2636.3.42.2.2.4.1.3 | Integer32 | read-only | The level two index of the container housing this subject. Zero if unavailable or inapplicable. |
| I32 jnxFabricFilledL3Index | 1.3.6.1.4.1.2636.3.42.2.2.4.1.4 | Integer32 | read-only | The level three index of the container housing this subject. Zero if unavailable or inapplicable. |
| STR jnxFabricFilledDescr | 1.3.6.1.4.1.2636.3.42.2.2.4.1.5 | DisplayString | read-only | The name or detailed description of this subject. |
| INT jnxFabricFilledState | 1.3.6.1.4.1.2636.3.42.2.2.4.1.6 | INTEGER | read-only | The filled state of this subject. |
| JNX jnxFabricFilledChassisId | 1.3.6.1.4.1.2636.3.42.2.2.4.1.7 | JnxChassisId | read-only | Identifies the chassis on which the contents of this row exists. |
| STR jnxFabricFilledChassisDescr | 1.3.6.1.4.1.2636.3.42.2.2.4.1.8 | DisplayString | read-only | A textual description of the chassis on which the contents of this row exists. |
| jnxFabricOperatingTable | 1.3.6.1.4.1.2636.3.42.2.2.5 | not-accessible | A list of operating status entries. | |
| jnxFabricOperatingEntry | 1.3.6.1.4.1.2636.3.42.2.2.5.1 | not-accessible | An entry of operating status table. | |
| I32 jnxFabricOperatingContentsIndex | 1.3.6.1.4.1.2636.3.42.2.2.5.1.1 | Integer32 | read-only | The associated jnxFabricContentsContainerIndex in the jnxFabricContentsTable. |
| I32 jnxFabricOperatingL1Index | 1.3.6.1.4.1.2636.3.42.2.2.5.1.2 | Integer32 | read-only | The level one index associated with this subject. Zero if unavailable or inapplicable. |
| I32 jnxFabricOperatingL2Index | 1.3.6.1.4.1.2636.3.42.2.2.5.1.3 | Integer32 | read-only | The level two index associated with this subject. Zero if unavailable or inapplicable. |
| I32 jnxFabricOperatingL3Index | 1.3.6.1.4.1.2636.3.42.2.2.5.1.4 | Integer32 | read-only | The level three index associated with this subject. Zero if unavailable or inapplicable. |
| STR jnxFabricOperatingDescr | 1.3.6.1.4.1.2636.3.42.2.2.5.1.5 | DisplayString | read-only | The name or detailed description of this subject. |
| INT jnxFabricOperatingState | 1.3.6.1.4.1.2636.3.42.2.2.5.1.6 | INTEGER | read-only | The operating state of this subject. |
| I32 jnxFabricOperatingTemp | 1.3.6.1.4.1.2636.3.42.2.2.5.1.7 | Integer32 | read-only | The temperature in Celsius (degrees C) of this subject. Zero if unavailable or inapplicable. |
| I32 jnxFabricOperatingCPU | 1.3.6.1.4.1.2636.3.42.2.2.5.1.8 | Integer32 | read-only | The CPU utilization in percentage of this subject. Zero if unavailable or inapplicable. |
| I32 jnxFabricOperatingISR | 1.3.6.1.4.1.2636.3.42.2.2.5.1.9 | Integer32 | read-only | The CPU utilization in percentage of this subject spending in interrupt service routine (ISR). Zero if unavailable or inapplicable. |
| I32 jnxFabricOperatingDRAMSize | 1.3.6.1.4.1.2636.3.42.2.2.5.1.10 | Integer32 | read-only | The DRAM size in bytes of this subject. Zero if unavailable or inapplicable. |
| I32 jnxFabricOperatingBuffer | 1.3.6.1.4.1.2636.3.42.2.2.5.1.11 | Integer32 | read-only | The buffer pool utilization in percentage of this subject. Zero if unavailable or inapplicable. |
| I32 jnxFabricOperatingHeap | 1.3.6.1.4.1.2636.3.42.2.2.5.1.12 | Integer32 | read-only | The heap utilization in percentage of this subject. Zero if unavailable or inapplicable. |
| TIK jnxFabricOperatingUpTime | 1.3.6.1.4.1.2636.3.42.2.2.5.1.13 | TimeTicks | read-only | The time interval in 10-millisecond period that this subject has been up and running. Zero if unavailable or inapplicable. |
| TIK jnxFabricOperatingLastRestart | 1.3.6.1.4.1.2636.3.42.2.2.5.1.14 | TimeTicks | read-only | The value of sysUpTime when this subject last restarted. Zero if unavailable or inapplicable. |
| I32 jnxFabricOperatingMemory | 1.3.6.1.4.1.2636.3.42.2.2.5.1.15 | Integer32 | read-only | The installed memory size in Megabytes of this subject. Zero if unavailable or inapplicable. |
| INT jnxFabricOperatingStateOrdered | 1.3.6.1.4.1.2636.3.42.2.2.5.1.16 | INTEGER | read-only | The operating state of this subject. Identical to jnxFabricOperatingState, but with enums ordered from 'most operational' to 'least operational' states. |
| JNX jnxFabricOperatingChassisId | 1.3.6.1.4.1.2636.3.42.2.2.5.1.17 | JnxChassisId | read-only | Identifies the chassis on which the contents of this row exists. |
| STR jnxFabricOperatingChassisDescr | 1.3.6.1.4.1.2636.3.42.2.2.5.1.18 | DisplayString | read-only | A textual description of the chassis on which the contents of this row exists. |
| DAT jnxFabricOperatingRestartTime | 1.3.6.1.4.1.2636.3.42.2.2.5.1.19 | DateAndTime | read-only | The time at which this entity last restarted. |
| I32 jnxFabricOperating1MinLoadAvg | 1.3.6.1.4.1.2636.3.42.2.2.5.1.20 | Integer32 | read-only | The CPU Load Average over the last 1 minutes Here it will be shown as percentage value Zero if unavailable or inapplicable. |
| I32 jnxFabricOperating5MinLoadAvg | 1.3.6.1.4.1.2636.3.42.2.2.5.1.21 | Integer32 | read-only | The CPU Load Average over the last 5 minutes Here it will be shown as percentage value Zero if unavailable or inapplicable. |
| I32 jnxFabricOperating15MinLoadAvg | 1.3.6.1.4.1.2636.3.42.2.2.5.1.22 | Integer32 | read-only | The CPU Load Average over the last 15 minutes Here it will be shown as percentage value Zero if unavailable or inapplicable. |
| jnxFabricRedundancyTable | 1.3.6.1.4.1.2636.3.42.2.2.6 | not-accessible | A list of redundancy information entries. | |
| jnxFabricRedundancyEntry | 1.3.6.1.4.1.2636.3.42.2.2.6.1 | not-accessible | An entry in the redundancy information table. | |
| I32 jnxFabricRedundancyContentsIndex | 1.3.6.1.4.1.2636.3.42.2.2.6.1.1 | Integer32 | read-only | The associated jnxFabricContentsContainerIndex in the jnxFabricContentsTable. |
| I32 jnxFabricRedundancyL1Index | 1.3.6.1.4.1.2636.3.42.2.2.6.1.2 | Integer32 | read-only | The level one index associated with this subject. Zero if unavailable or inapplicable. |
| I32 jnxFabricRedundancyL2Index | 1.3.6.1.4.1.2636.3.42.2.2.6.1.3 | Integer32 | read-only | The level two index associated with this subject. Zero if unavailable or inapplicable. |
| I32 jnxFabricRedundancyL3Index | 1.3.6.1.4.1.2636.3.42.2.2.6.1.4 | Integer32 | read-only | The level three index associated with this subject. Zero if unavailable or inapplicable. |
| STR jnxFabricRedundancyDescr | 1.3.6.1.4.1.2636.3.42.2.2.6.1.5 | DisplayString | read-only | The name or detailed description of this subject. |
| INT jnxFabricRedundancyConfig | 1.3.6.1.4.1.2636.3.42.2.2.6.1.6 | INTEGER | read-only | The election priority of redundancy configuration for this subject. The value 'notApplicable' means no specific instance is configured to be master or backup; whichever component boots up first becomes a master. |
| INT jnxFabricRedundancyState | 1.3.6.1.4.1.2636.3.42.2.2.6.1.7 | INTEGER | read-only | The current running state for this subject. |
| C32 jnxFabricRedundancySwitchoverCountEx | 1.3.6.1.4.1.2636.3.42.2.2.6.1.8 | Counter32 | read-only | The total number of switchover as perceived by this subject since routing engine is up and running. The switchover is defined as a change in state of jnxFabricRedundancyState from master to backup or vice versa. Its value is reset when the routing engine is reset or rebooted. |
| TIK jnxFabricRedundancySwitchoverTime | 1.3.6.1.4.1.2636.3.42.2.2.6.1.9 | TimeTicks | read-only | The value of sysUpTime when the jnxFabricRedundancyState of this subject was last switched over from master to backup or vice versa. Zero if unknown or never switched over since the routing engine is up and running. |
| INT jnxFabricRedundancySwitchoverReason | 1.3.6.1.4.1.2636.3.42.2.2.6.1.10 | INTEGER | read-only | The reason of the last switchover for this subject. |
| I32 jnxFabricRedundancyKeepaliveHeartbeat | 1.3.6.1.4.1.2636.3.42.2.2.6.1.11 | Integer32 | read-only | The period of sending keepalive messages between the master and backup subsystems. It is a system-wide preset value in seconds used by internal mastership resolution. Zero if unavailable or inapplicable. |
| I32 jnxFabricRedundancyKeepaliveTimeout | 1.3.6.1.4.1.2636.3.42.2.2.6.1.12 | Integer32 | read-only | The timeout period in seconds, by the keepalive watchdog timer, before initiating a switch over to the backup subsystem. Zero if unavailable or inapplicable. |
| I32 jnxFabricRedundancyKeepaliveElapsed | 1.3.6.1.4.1.2636.3.42.2.2.6.1.13 | Integer32 | read-only | The elapsed time in seconds by this subject since receiving the last keepalive message from the other subsystems. Zero if unavailable or inapplicable. |
| C32 jnxFabricRedundancyKeepaliveLoss | 1.3.6.1.4.1.2636.3.42.2.2.6.1.14 | Counter32 | read-only | The total number of losses on keepalive messages between the master and backup subsystems as perceived by this subject since the system is up and running. Zero if unavailable or inapplicable. |
| JNX jnxFabricRedundancyChassisId | 1.3.6.1.4.1.2636.3.42.2.2.6.1.15 | JnxChassisId | read-only | Identifies the chassis on which the contents of this row exists. |
| STR jnxFabricRedundancyChassisDescr | 1.3.6.1.4.1.2636.3.42.2.2.6.1.16 | DisplayString | read-only | A textual description of the chassis on which the contents of this row exists. |
| jnxFabricFruTable | 1.3.6.1.4.1.2636.3.42.2.2.7 | not-accessible | A list of FRU status entries. | |
| jnxFabricFruEntry | 1.3.6.1.4.1.2636.3.42.2.2.7.1 | not-accessible | An entry in the FRU status table. | |
| I32 jnxFabricFruContentsIndex | 1.3.6.1.4.1.2636.3.42.2.2.7.1.1 | Integer32 | read-only | The associated jnxFabricContentsContainerIndex in the jnxFabricContentsTable. |
| I32 jnxFabricFruL1Index | 1.3.6.1.4.1.2636.3.42.2.2.7.1.2 | Integer32 | read-only | The level one index associated with this subject. Zero if unavailable or inapplicable. |
| I32 jnxFabricFruL2Index | 1.3.6.1.4.1.2636.3.42.2.2.7.1.3 | Integer32 | read-only | The level two index associated with this subject. Zero if unavailable or inapplicable. |
| I32 jnxFabricFruL3Index | 1.3.6.1.4.1.2636.3.42.2.2.7.1.4 | Integer32 | read-only | The level three index associated with this subject. Zero if unavailable or inapplicable. |
| STR jnxFabricFruName | 1.3.6.1.4.1.2636.3.42.2.2.7.1.5 | DisplayString | read-only | The name or detailed description of this subject. |
| INT jnxFabricFruType | 1.3.6.1.4.1.2636.3.42.2.2.7.1.6 | INTEGER | read-only | The FRU type for this subject. |
| I32 jnxFabricFruSlot | 1.3.6.1.4.1.2636.3.42.2.2.7.1.7 | Integer32 | read-only | The slot number of this subject. This is equivalent to jnxFabricFruL1Index in meaning. Zero if unavailable or inapplicable. |
| INT jnxFabricFruState | 1.3.6.1.4.1.2636.3.42.2.2.7.1.8 | INTEGER | read-only | The current state for this subject. |
| I32 jnxFabricFruTemp | 1.3.6.1.4.1.2636.3.42.2.2.7.1.9 | Integer32 | read-only | The temperature in Celsius (degrees C) of this subject. Zero if unavailable or inapplicable. |
| INT jnxFabricFruOfflineReason | 1.3.6.1.4.1.2636.3.42.2.2.7.1.10 | INTEGER | read-only | The offline reason of this subject. |
| TIK jnxFabricFruLastPowerOff | 1.3.6.1.4.1.2636.3.42.2.2.7.1.11 | TimeTicks | read-only | The value of sysUpTime when this subject was last powered off. Zero if unavailable or inapplicable. |
| TIK jnxFabricFruLastPowerOn | 1.3.6.1.4.1.2636.3.42.2.2.7.1.12 | TimeTicks | read-only | The value of sysUpTime when this subject was last powered on. Zero if unavailable or inapplicable. |
| TIK jnxFabricFruPowerUpTime | 1.3.6.1.4.1.2636.3.42.2.2.7.1.13 | TimeTicks | read-only | The time interval in 10-millisecond period that this subject has been up and running since the last power on time. Zero if unavailable or inapplicable. |
| JNX jnxFabricFruChassisId | 1.3.6.1.4.1.2636.3.42.2.2.7.1.14 | JnxChassisId | read-only | Identifies the chassis on which the contents of this row exists. |
| STR jnxFabricFruChassisDescr | 1.3.6.1.4.1.2636.3.42.2.2.7.1.15 | DisplayString | read-only | A textual description of the chassis on which the contents of this row exists. |
| I32 jnxFabricFruPsdAssignment | 1.3.6.1.4.1.2636.3.42.2.2.7.1.16 | Integer32 | read-only | The PSD assignment of this subject. Zero if unavailable or not applicable. |
| NTF jnxFabricPowerSupplyFailure | 1.3.6.1.4.1.2636.4.19.1 | A jnxFabricPowerSupplyFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply in the chassis has been in the failure (bad DC output) condition. | ||
| NTF jnxFabricFanFailure | 1.3.6.1.4.1.2636.4.19.2 | A jnxFabricFanFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has been in the failure (not spinning) condition. | ||
| NTF jnxFabricOverTemperature | 1.3.6.1.4.1.2636.4.19.3 | A jnxFabricOverTemperature trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced over temperature condition. | ||
| NTF jnxFabricRedundancySwitchover | 1.3.6.1.4.1.2636.4.19.4 | A jnxFabricRedundancySwitchover trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced a redundancy switchover event defined as a change in state of jnxFabricRedundancyState from master to backup or vice versa. | ||
| NTF jnxFabricFruRemoval | 1.3.6.1.4.1.2636.4.19.5 | A jnxFabricFruRemoval trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been removed from the chassis. | ||
| NTF jnxFabricFruInsertion | 1.3.6.1.4.1.2636.4.19.6 | A jnxFabricFruInsertion trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been inserted into the chassis. | ||
| NTF jnxFabricFruPowerOff | 1.3.6.1.4.1.2636.4.19.7 | A jnxFabricFruPowerOff trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered off in the chassis. | ||
| NTF jnxFabricFruPowerOn | 1.3.6.1.4.1.2636.4.19.8 | A jnxFabricFruPowerOn trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered on in the chassis. | ||
| NTF jnxFabricFruFailed | 1.3.6.1.4.1.2636.4.19.9 | This indicates the specified FRU (Field Replaceable Unit) has failed in the chassis. Most probably this is due toi some hard error such as fru is not powering up or not able to load ukernel. In these cases, fru is replaced. | ||
| NTF jnxFabricFruOffline | 1.3.6.1.4.1.2636.4.19.10 | A jnxFabricFruOffline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has gone offline in the chassis. | ||
| NTF jnxFabricFruOnline | 1.3.6.1.4.1.2636.4.19.11 | A jnxFabricFruOnline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has gone online in the chassis. | ||
| NTF jnxFabricFruCheck | 1.3.6.1.4.1.2636.4.19.12 | A jnxFabricFruCheck trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has encountered some operational errors and gone into check state in the chassis. | ||
| NTF jnxFabricFEBSwitchover | 1.3.6.1.4.1.2636.4.19.13 | A jnxFabricFEBSwitchover trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FEB (Forwarding Engine Board) has switched over. | ||
| NTF jnxFabricHardDiskFailed | 1.3.6.1.4.1.2636.4.19.14 | A jnxHardDiskFailed trap signifies that the SNMP entity, acting in an agent role, has detected that the Disk in the specified Routing Engine has encountered some operational errors and gone into failed state in the chassis. | ||
| NTF jnxFabricHardDiskMissing | 1.3.6.1.4.1.2636.4.19.15 | A DiskMissing trap signifies that the SNMP entity, acting in an agent role, has detected that hard disk in the specified outing Engine is missing from boot device list. | ||
| NTF jnxFabricBootFromBackup | 1.3.6.1.4.1.2636.4.19.16 | A jnxBootFromBackup trap signifies that the SNMP entity, acting in an agent role, has detected that the specified routing-engine/member has booted from the back up root partition | ||
| NTF jnxFabricPowerSupplyOK | 1.3.6.1.4.1.2636.4.20.1 | A jnxFabricPowerSupplyOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply in the chassis has recovered from the failure (bad DC output) condition. | ||
| NTF jnxFabricFanOK | 1.3.6.1.4.1.2636.4.20.2 | A jnxFabricFanOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has recovered from the failure (not spinning) condition. | ||
| NTF jnxFabricTemperatureOK | 1.3.6.1.4.1.2636.4.20.3 | A jnxFabricTemperatureOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has recovered from over temperature condition. | ||
| NTF jnxFabricFruOK | 1.3.6.1.4.1.2636.4.20.4 | A jnxFabricFabricFruOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has recovered from previous operational errors and it is in ok state in the chassis. |
RFC description
Manages Juniper Quantum Fabric hardware components including chassis, nodes, and fabric container family information.
Start monitoring Juniper QFabric system / multi-chassis fabric switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.