Juniper-Bridging-Manager-MIB

All MIBs › Juniper-Bridging-Manager-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2002-10-11

Category: Technology: Bridging, Technology: VLAN, Vendor: Juniper

Description: Provides managed objects for the bridging manager controlling L2 forwarding and VLAN operations on Juniper E-series routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Juniper-Bridging-Manager-MIB?

Juniper-Bridging-Manager-MIB is a Juniper Networks proprietary MIB managing bridge groups and per-subscriber bridging policy on Juniper E-series (ERX) broadband routers. Its bridge-group table records index, row status, learning enable, name, associated subscriber-policy index, route protocol, and learned-address count, while a subscriber-policy table records row status and per-traffic-type forwarding flags — ARP, broadcast, multicast, unknown unicast, IP, unknown protocol, unicast, PPPoE, MAC-relearn, and MPLS. As a configuration MIB it lets an administrator confirm which traffic types a subscriber's bridge policy permits, useful for locking down a residential bridged subscriber to only the expected protocols. It is deployed on Juniper Networks E-series (ERX) broadband routers. Engineers can download the Juniper-Bridging-Manager-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-Bridging-Manager-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks E-series (ERX) broadband routers

Monitoring Examples

An administrator checks juniBridgingMgrBridgeSubscriberPolicyPPPoE to confirm a subscriber's bridge policy permits PPPoE traffic before troubleshooting a failed PPPoE session on a Juniper E-series router.

What Can Be Monitored

bridge group and subscriber bridging policy configuration

Imported Objects

From Juniper-MIBs

juniMibs

MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
juniBridgingMgrMIB	1.3.6.1.4.1.4874.2.2.64			Initial version of this MIB module to support Bridging.
juniBridgingMgrBridgeGroup	1.3.6.1.4.1.4874.2.2.64.1
JUN juniBridgingMgrNextIndex	1.3.6.1.4.1.4874.2.2.64.1.1	JuniBridgingMgrNextIndex	read-only	This scalar object returns the index of the next available row in the juniBridgingMgrBridgeGroupTable. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.
juniBridgingMgrBridgeGroupTable	1.3.6.1.4.1.4874.2.2.64.1.3		not-accessible	A list of configuration entries for a bridge group.
juniBridgingMgrBridgeGroupEntry	1.3.6.1.4.1.4874.2.2.64.1.3.1		not-accessible	Configuration parameters for a bridge group.
U32 juniBridgingMgrBridgeGroupIndex	1.3.6.1.4.1.4874.2.2.64.1.3.1.1	Unsigned32	not-accessible	The number of the bridge group table entry which is defined by this row.
ROW juniBridgingMgrBridgeRowStatus	1.3.6.1.4.1.4874.2.2.64.1.3.1.2	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
INT juniBridgingMgrBridgeGroupLearning	1.3.6.1.4.1.4874.2.2.64.1.3.1.3	INTEGER	read-create	This object indicates if MAC address learning is enabled or disabled for the bridge group.
STR juniBridgingMgrBridgeGroupName	1.3.6.1.4.1.4874.2.2.64.1.3.1.4	DisplayString	read-create	The name of the bridge group.
I32 juniBridgingMgrBridgeGroupSPolicyIndex	1.3.6.1.4.1.4874.2.2.64.1.3.1.5	Integer32	read-create	The index of the associated subscriber policy.
JUN juniBridgingMgrBridgeGroupRouteProtocol	1.3.6.1.4.1.4874.2.2.64.1.3.1.6	JuniBridgingMgrBridgeRouteMask	read-create	The protocol masks for which protocols to route.
INT juniBridgingMgrBridgeGroupLearnCount	1.3.6.1.4.1.4874.2.2.64.1.3.1.7	INTEGER	read-create	This object represents the maximum number of mac entries that can be learned from any one bridge interface belonging to this bridge group. The default value of 0 indicates that the maximum number of entries is not restricted.
juniBridgingMgrBridgeSubscriberPolicy	1.3.6.1.4.1.4874.2.2.64.2
I32 juniBridgingMgrSubscriberNextIndex	1.3.6.1.4.1.4874.2.2.64.2.1	Integer32	read-only	This scalar object returns the index of the next available row in the juniBridgingMgrBridgeSubscriberPolicyTable. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.
juniBridgingMgrBridgeSubscriberPolicyTable	1.3.6.1.4.1.4874.2.2.64.2.2		not-accessible	A list of subscriber policy entries.
juniBridgingMgrBridgeSubscriberPolicyEntry	1.3.6.1.4.1.4874.2.2.64.2.2.1		not-accessible	Configuration parameters for a subscriber policy.
I32 juniBridgingMgrBridgeSubscriberPolicyIndex	1.3.6.1.4.1.4874.2.2.64.2.2.1.1	Integer32	not-accessible	The number of the subscriber policy table entry which is defined by this row.
ROW juniBridgingMgrBridgeSubscriberPolicyRowStatus	1.3.6.1.4.1.4874.2.2.64.2.2.1.2	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
INT juniBridgingMgrBridgeSubscriberPolicyArp	1.3.6.1.4.1.4874.2.2.64.2.2.1.3	INTEGER	read-create	This object indicates if ARP is permitted or denied.
INT juniBridgingMgrBridgeSubscriberPolicyBroadcast	1.3.6.1.4.1.4874.2.2.64.2.2.1.4	INTEGER	read-create	This object indicates if Broadcast packets are permitted or denied.
INT juniBridgingMgrBridgeSubscriberPolicyMulticast	1.3.6.1.4.1.4874.2.2.64.2.2.1.5	INTEGER	read-create	This object indicates if Multicast packets are permitted or denied.
INT juniBridgingMgrBridgeSubscriberPolicyUnknownUnicast	1.3.6.1.4.1.4874.2.2.64.2.2.1.6	INTEGER	read-create	This object indicates if Unknown DA unicast packets are permitted or denied.
INT juniBridgingMgrBridgeSubscriberPolicyIp	1.3.6.1.4.1.4874.2.2.64.2.2.1.7	INTEGER	read-create	This object indicates if IP is permitted or denied.
INT juniBridgingMgrBridgeSubscriberPolicyUnknownProtocol	1.3.6.1.4.1.4874.2.2.64.2.2.1.8	INTEGER	read-create	This object indicates if packets with unknown protocols are permitted or denied. Unknown is defined as not IP or PPPoE.
INT juniBridgingMgrBridgeSubscriberPolicyUnicast	1.3.6.1.4.1.4874.2.2.64.2.2.1.9	INTEGER	read-create	This object indicates if Unicast packets are permitted or denied.
INT juniBridgingMgrBridgeSubscriberPolicyPPPoE	1.3.6.1.4.1.4874.2.2.64.2.2.1.10	INTEGER	read-create	This object indicates if PPPoE packets are permitted or denied.
INT juniBridgingMgrBridgeSubscriberPolicyRelearn	1.3.6.1.4.1.4874.2.2.64.2.2.1.11	INTEGER	read-create	This object indicates if packets that cause MAC addressing relearning are permitted or denied.
INT juniBridgingMgrBridgeSubscriberPolicyMpls	1.3.6.1.4.1.4874.2.2.64.2.2.1.12	INTEGER	read-create	This object indicates if Mpls packets are permitted or denied.
STR juniBridgingMgrBridgeSubscriberPolicyName	1.3.6.1.4.1.4874.2.2.64.2.2.1.13	DisplayString	read-create	The name of the subscriber policy.
juniBridgingMgrBridge	1.3.6.1.4.1.4874.2.2.64.3
INT juniBridgingMgrBridgeMode	1.3.6.1.4.1.4874.2.2.64.3.1	INTEGER	read-write	This scalar object represents the mode of the bridge. The legal values are the following: default, CRB, IRB, and other. If the legal value is not supported by a particular implementation an error will occur.
juniBridgingMgrConformance	1.3.6.1.4.1.4874.2.2.64.4
juniBridgingMgrCompliances	1.3.6.1.4.1.4874.2.2.64.4.1
juniBridgingMgrCompliance	1.3.6.1.4.1.4874.2.2.64.4.1.1			The compliance statement for entities which implement the Juniper Bridging Manager MIB.
juniBridgingMgrGroups	1.3.6.1.4.1.4874.2.2.64.4.2
juniBridgingMgrConfGroup	1.3.6.1.4.1.4874.2.2.64.4.2.1			A collection of objects providing basic management of the Bridging Manager in a Juniper product.

RFC description

Juniper Networks bridging management for virtual private LAN services including bridge route configuration.

Start monitoring Juniper Networks E-series (ERX) broadband router (subscriber bridging policy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Juniper-Bridging-Manager-MIB

What Is Juniper-Bridging-Manager-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description