All MIBs › JUNIPER-MIB
Organization: Juniper Networks, Inc.
Last Updated: 2013-05-22
Category: Hardware and Environment, Vendor: Juniper
Description: Juniper Networks enterprise MIB providing hardware chassis information, system inventory, and device identification for Junos OS-based routers and switches.
IPNetwork Monitor uses several OIDs from this MIB in network discovery and polling the applicable devices. Start monitoring JUNIPER-MIB with a free 30-day trial of IPNetwork Monitor.
What Is JUNIPER-MIB?
JUNIPER-MIB is Juniper Networks' top-level enterprise MIB module, providing the base framework for hardware chassis information, system inventory, and device identification across Junos OS-based routers and switches. It belongs to the enterprise networking/routing-and-switching technology area. It exposes general categories of data including chassis/hardware inventory, system identification, and the OID registration structure under which Juniper's many device-specific and feature-specific MIBs (interfaces, environment, performance, alarms) are organized. As a foundational module it supports monitoring of hardware status such as chassis component identity and inventory, complementing dependent Juniper MIBs that expose temperature, CPU/memory load, power supply, and fan health in detail. Loading JUNIPER-MIB into a juniper mib browser mainly surfaces this enterprise OID tree and chassis registration structure, since the module itself defines little pollable data beyond that framework. It depends on and interoperates with the standard RFC 2737 ENTITY-MIB and numerous Juniper-specific extension MIBs layered on this enterprise tree. It is deployed in service-provider and enterprise networks running Juniper routers, switches, and security appliances (Junos OS).
IPNetwork Monitor allows you to monitor SNMP objects defined in JUNIPER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Juniper Networks routers/switches/security appliances running Junos OS (any generation)
Monitoring Examples
No sample objects were supplied for JUNIPER-MIB itself, so a concrete instance-level polling scenario cannot be grounded in verified object names; in practice this module functions as the enterprise-tree anchor, and an operator would poll the dependent Juniper hardware/environment MIBs rooted under this tree for temperature, CPU, and chassis component status rather than polling JUNIPER-MIB directly.
This MIB depends on
Related MIBs
Imported Objects
From JUNIPER-SMI
| jnxChassisOKTraps | OBJECT-IDENTITY |
| jnxChassisTraps | OBJECT-IDENTITY |
| jnxMibs | OBJECT-IDENTITY |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| TEXTUAL-CONVENTION | |
| TimeInterval | |
| TimeStamp |
How to Use in IPNetwork Monitor
Example using jnxBoxKernelMemoryUsedPercent OID:
Select a Juniper Networks Junos OS device as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type jnxBoxKernelMemoryUsedPercent into the Find box to locate it in the OID tree, then select it and click OK. It reports the percentage of kernel memory currently in use on this device. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if kernel memory usage exceeds 90%, since sustained high kernel memory pressure can lead to dropped packets or process instability. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| NTF jnxBootFromBackup | 1.3.6.1.4.1.2636.4.1.16 | A jnxBootFromBackup trap signifies that the SNMP entity, acting in an agent role, has detected that the specified routing-engine/member has booted from the back up root partition | ||
| jnxBoxAnatomy | 1.3.6.1.4.1.2636.3.1 | The MIB modules representing Juniper Networks' implementation of enterprise specific MIBs supported by a single SNMP agent. | ||
| OID jnxBoxClass | 1.3.6.1.4.1.2636.3.1.1 | OBJECT IDENTIFIER | read-only | The class of the box, indicating which product line the box is about, for example, 'Internet Router'. |
| STR jnxBoxDescr | 1.3.6.1.4.1.2636.3.1.2 | DisplayString | read-only | The name, model, or detailed description of the box, indicating which product the box is about, for example 'M40'. |
| TIM jnxBoxInstalled | 1.3.6.1.4.1.2636.3.1.5 | TimeStamp | read-only | The value of sysUpTime when the subject was last installed, up-and-running. Zero if unknown or already up-and-running when the agent was up. |
| I32 jnxBoxKernelMemoryUsedPercentEx | 1.3.6.1.4.1.2636.3.1.16 | Integer32 | read-only | The percentage of kernel memory used of this subject. 0 if unavailable or inapplicable. |
| OID jnxBoxPersonality | 1.3.6.1.4.1.2636.3.1.18 | OBJECT IDENTIFIER | read-only | The personality of the box, indicating which product line it is currently acting as for example, 'MX40'. |
| STR jnxBoxRevision | 1.3.6.1.4.1.2636.3.1.4 | DisplayString | read-only | The revision of this subject, blank if unknown or unavailable. |
| STR jnxBoxSerialNo | 1.3.6.1.4.1.2636.3.1.3 | DisplayString | read-only | The serial number of this subject, blank if unknown or unavailable. |
| INT jnxBoxSystemDomainType | 1.3.6.1.4.1.2636.3.1.17 | INTEGER | read-only | The system domain type of this subject, notApplicable will be returned if this feature is not supported. |
| I32 jnxContainersCount | 1.3.6.1.4.1.2636.3.1.6.1.7 | Integer32 | read-only | The maximum number of containers of this level per container of the next higher level. e.g. if there are six level 2 containers in level 1 container, then jnxContainersCount for level 2 is six. |
| STR jnxContainersDescr | 1.3.6.1.4.1.2636.3.1.6.1.6 | DisplayString | read-only | The name or detailed description of this subject. |
| jnxContainersEntry | 1.3.6.1.4.1.2636.3.1.6.1 | not-accessible | An entry of containers table. | |
| I32 jnxContainersIndex | 1.3.6.1.4.1.2636.3.1.6.1.1 | Integer32 | read-only | The index for this entry. |
| I32 jnxContainersLevel | 1.3.6.1.4.1.2636.3.1.6.1.3 | Integer32 | read-only | The abstraction level of the box or chassis. It is enumerated from the outside to the inside, from the outer layer to the inner layer. For example, top level (i.e. level 0) refers to chassis frame, level 1 FPC slot within chassis frame, level 2 PIC space within FPC slot. |
| jnxContainersTable | 1.3.6.1.4.1.2636.3.1.6 | not-accessible | A list of containers entries. | |
| OID jnxContainersType | 1.3.6.1.4.1.2636.3.1.6.1.5 | OBJECT IDENTIFIER | read-only | The type of this container. |
| I32 jnxContainersView | 1.3.6.1.4.1.2636.3.1.6.1.2 | Integer32 | read-only | The view(s) from which the specific container appears. This variable indicates that the specific container is embedded and accessible from the corresponding view(s). The value is a bit map represented as a sum. If multiple bits are set, the specified container(s) are located and accessible from that set of views. The various values representing the bit positions and its corresponding views are: 1 front 2 rear 4 top 8 bottom 16 leftHandSide 32 rightHandSide Note 1: LefHandSide and rightHandSide are referred to based on the view from the front. Note 2: If the specified containers are scattered around various views, the numbering is according to the following sequence: front -> rear -> top -> bottom -> leftHandSide -> rightHandSide For each view plane, the numbering sequence is first from left to right, and then from up to down. Note 3: Even though the value in chassis hardware (e.g. slot number) may be labelled from 0, 1, 2, and up, all the indices in MIB start with 1 (not 0) according to network management convention. |
| I32 jnxContainersWithin | 1.3.6.1.4.1.2636.3.1.6.1.4 | Integer32 | read-only | The index of its next higher level container housing this entry. The associated jnxContainersIndex in the jnxContainersTable represents its next higher level container. |
| STR jnxContentsChassisCleiCode | 1.3.6.1.4.1.2636.3.1.8.1.13 | DisplayString | read-only | The clei code of this subject, blank if unknown or unavailable. A CLEI code is an intelligent code that consists of 10 alphanumeric characters with 4 data elements. The first data element is considered the basic code with the first 2 characters indicating the technology or equipment type, and the third and fourth characters denoting the functional sub-category. The second data element represents the features, and its three characters denote functional capabilities or changes. The third data element has one character and denotes a reference to a manufacturer, system ID, specification, or drawing. The fourth data element consists of two characters and contains complementary data. These two characters provide a means of differentiating or providing uniqueness between the eight character CLEI codes by identifying the manufacturing vintage of the product. Names are assigned via procedures defined in [GR485]. The assigned maintenance agent for the CLEI code, Telcordia Technologies, is responsible for assigning certain equipment and other identifiers (e.g., location, manufacturer/supplier) for the telecommunications industry. |
| STR jnxContentsChassisDescr | 1.3.6.1.4.1.2636.3.1.8.1.12 | DisplayString | read-only | A textual description of the chassis on which the contents of this row exists. |
| JNX jnxContentsChassisId | 1.3.6.1.4.1.2636.3.1.8.1.11 | JnxChassisId | read-only | Identifies the chassis on which the contents of this row exists. |
| I32 jnxContentsContainerIndex | 1.3.6.1.4.1.2636.3.1.8.1.1 | Integer32 | read-only | The associated jnxContainersIndex in the jnxContainersTable. |
| STR jnxContentsDescr | 1.3.6.1.4.1.2636.3.1.8.1.6 | DisplayString | read-only | The name or detailed description of this subject. |
| jnxContentsEntry | 1.3.6.1.4.1.2636.3.1.8.1 | not-accessible | An entry of contents table. | |
| TIM jnxContentsInstalled | 1.3.6.1.4.1.2636.3.1.8.1.9 | TimeStamp | read-only | The value of sysUpTime when the subject was last installed, up-and-running. Zero if unknown or already up-and-running when the agent was up. |
| I32 jnxContentsL1Index | 1.3.6.1.4.1.2636.3.1.8.1.2 | Integer32 | read-only | The level one index of the container housing this subject. Zero if unavailable or inapplicable. |
| I32 jnxContentsL2Index | 1.3.6.1.4.1.2636.3.1.8.1.3 | Integer32 | read-only | The level two index of the container housing this subject. Zero if unavailable or inapplicable. |
| I32 jnxContentsL3Index | 1.3.6.1.4.1.2636.3.1.8.1.4 | Integer32 | read-only | The level three index of the container housing this subject. Zero if unavailable or inapplicable. |
| TIM jnxContentsLastChange | 1.3.6.1.4.1.2636.3.1.7 | TimeStamp | read-only | The value of sysUpTime when the box contents table last changed. Zero if unknown or already existing when the agent was up. |
| STR jnxContentsPartNo | 1.3.6.1.4.1.2636.3.1.8.1.10 | DisplayString | read-only | The part number of this subject, blank if unknown or unavailable. |
| STR jnxContentsRevision | 1.3.6.1.4.1.2636.3.1.8.1.8 | DisplayString | read-only | The revision of this subject, blank if unknown or unavailable. |
| STR jnxContentsSerialNo | 1.3.6.1.4.1.2636.3.1.8.1.7 | DisplayString | read-only | The serial number of this subject, blank if unknown or unavailable. |
| jnxContentsTable | 1.3.6.1.4.1.2636.3.1.8 | not-accessible | A list of contents entries. | |
| OID jnxContentsType | 1.3.6.1.4.1.2636.3.1.8.1.5 | OBJECT IDENTIFIER | read-only | The type of this subject. zeroDotZero if unknown. |
| NTF jnxExtSrcLockAcquired | 1.3.6.1.4.1.2636.4.2.5 | A ExtSrcLockAcquired trap signifies that the SNMP entity, acting in an agent role, has detected that a lock for an external clock source has been acquired. | ||
| NTF jnxExtSrcLockLost | 1.3.6.1.4.1.2636.4.1.19 | A ExtSrcLockLost trap signifies that the SNMP entity, acting in an agent role, has detected that a lock for an external clock source has been lost. | ||
| NTF jnxFanFailure | 1.3.6.1.4.1.2636.4.1.2 | A jnxFanFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has been in the failure (not spinning) condition. | ||
| NTF jnxFanOK | 1.3.6.1.4.1.2636.4.2.2 | A jnxFanOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has recovered from the failure (not spinning) condition. | ||
| NTF jnxFEBSwitchover | 1.3.6.1.4.1.2636.4.1.13 | A jnxFEBSwitchover trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FEB (Forwarding Engine Board) has switched over. | ||
| STR jnxFilledChassisDescr | 1.3.6.1.4.1.2636.3.1.12.1.8 | DisplayString | read-only | A textual description of the chassis on which the contents of this row exists. |
| JNX jnxFilledChassisId | 1.3.6.1.4.1.2636.3.1.12.1.7 | JnxChassisId | read-only | Identifies the chassis on which the contents of this row exists. |
| I32 jnxFilledContainerIndex | 1.3.6.1.4.1.2636.3.1.12.1.1 | Integer32 | read-only | The associated jnxContainersIndex in the jnxContainersTable. |
| STR jnxFilledDescr | 1.3.6.1.4.1.2636.3.1.12.1.5 | DisplayString | read-only | The name or detailed description of this subject. |
| jnxFilledEntry | 1.3.6.1.4.1.2636.3.1.12.1 | not-accessible | An entry of filled status table. | |
| I32 jnxFilledL1Index | 1.3.6.1.4.1.2636.3.1.12.1.2 | Integer32 | read-only | The level one index of the container housing this subject. Zero if unavailable or inapplicable. |
| I32 jnxFilledL2Index | 1.3.6.1.4.1.2636.3.1.12.1.3 | Integer32 | read-only | The level two index of the container housing this subject. Zero if unavailable or inapplicable. |
| I32 jnxFilledL3Index | 1.3.6.1.4.1.2636.3.1.12.1.4 | Integer32 | read-only | The level three index of the container housing this subject. Zero if unavailable or inapplicable. |
| TIM jnxFilledLastChange | 1.3.6.1.4.1.2636.3.1.11 | TimeStamp | read-only | The value of sysUpTime when the box filled status table last changed. Zero if unknown or already at that state when the agent was up. |
| INT jnxFilledState | 1.3.6.1.4.1.2636.3.1.12.1.6 | INTEGER | read-only | The filled state of this subject. |
| jnxFilledTable | 1.3.6.1.4.1.2636.3.1.12 | not-accessible | A list of filled status entries. | |
| NTF jnxFmCellDropErr | 1.3.6.1.4.1.2636.4.1.18 | A CellDropErr trap signifies that the SNMP entity, acting in an agent role, has detected cell drop errors. | ||
| NTF jnxFmLinkErr | 1.3.6.1.4.1.2636.4.1.17 | A LinkErr trap signifies that the SNMP entity, acting in an agent role, has detected link errors. | ||
| STR jnxFruChassisDescr | 1.3.6.1.4.1.2636.3.1.15.1.15 | DisplayString | read-only | A textual description of the chassis on which the contents of this row exists. |
| JNX jnxFruChassisId | 1.3.6.1.4.1.2636.3.1.15.1.14 | JnxChassisId | read-only | Identifies the chassis on which the contents of this row exists. |
| NTF jnxFruCheck | 1.3.6.1.4.1.2636.4.1.12 | A jnxFruCheck trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has encountered some operational errors and gone into check state in the chassis. | ||
| I32 jnxFruContentsIndex | 1.3.6.1.4.1.2636.3.1.15.1.1 | Integer32 | read-only | The associated jnxContentsContainerIndex in the jnxContentsTable. |
| jnxFruEntry | 1.3.6.1.4.1.2636.3.1.15.1 | not-accessible | An entry in the FRU status table. | |
| NTF jnxFruFailed | 1.3.6.1.4.1.2636.4.1.9 | This indicates the specified FRU (Field Replaceable Unit) has failed in the chassis. Most probably this is due toi some hard error such as fru is not powering up or not able to load ukernel. In these cases, fru is replaced. | ||
| NTF jnxFruInsertion | 1.3.6.1.4.1.2636.4.1.6 | A jnxFruInsertion trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been inserted into the chassis. | ||
| I32 jnxFruL1Index | 1.3.6.1.4.1.2636.3.1.15.1.2 | Integer32 | read-only | The level one index associated with this subject. Zero if unavailable or inapplicable. |
| I32 jnxFruL2Index | 1.3.6.1.4.1.2636.3.1.15.1.3 | Integer32 | read-only | The level two index associated with this subject. Zero if unavailable or inapplicable. |
| I32 jnxFruL3Index | 1.3.6.1.4.1.2636.3.1.15.1.4 | Integer32 | read-only | The level three index associated with this subject. Zero if unavailable or inapplicable. |
| TIM jnxFruLastPowerOff | 1.3.6.1.4.1.2636.3.1.15.1.11 | TimeStamp | read-only | The value of sysUpTime when this subject was last powered off. Zero if unavailable or inapplicable. |
| TIM jnxFruLastPowerOn | 1.3.6.1.4.1.2636.3.1.15.1.12 | TimeStamp | read-only | The value of sysUpTime when this subject was last powered on. Zero if unavailable or inapplicable. |
| STR jnxFruName | 1.3.6.1.4.1.2636.3.1.15.1.5 | DisplayString | read-only | The name or detailed description of this subject. |
| NTF jnxFruOffline | 1.3.6.1.4.1.2636.4.1.10 | A jnxFruOffline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has gone offline in the chassis. | ||
| INT jnxFruOfflineReason | 1.3.6.1.4.1.2636.3.1.15.1.10 | INTEGER | read-only | The offline reason of this subject. |
| NTF jnxFruOK | 1.3.6.1.4.1.2636.4.2.4 | A jnxFruOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has recovered from previous operational errors and it is in ok state in the chassis. | ||
| NTF jnxFruOnline | 1.3.6.1.4.1.2636.4.1.11 | A jnxFruOnline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has gone online in the chassis. | ||
| NTF jnxFruPowerOff | 1.3.6.1.4.1.2636.4.1.7 | A jnxFruPowerOff trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered off in the chassis. | ||
| NTF jnxFruPowerOn | 1.3.6.1.4.1.2636.4.1.8 | A jnxFruPowerOn trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered on in the chassis. | ||
| NUM jnxFruPowerUpTime | 1.3.6.1.4.1.2636.3.1.15.1.13 | TimeInterval | read-only | The time interval in 10-millisecond period that this subject has been up and running since the last power on time. Zero if unavailable or inapplicable. |
| I32 jnxFruPsdAssignment | 1.3.6.1.4.1.2636.3.1.15.1.16 | Integer32 | read-only | The PSD assignment of this subject. Zero if unavailable or not applicable. |
| NTF jnxFruRemoval | 1.3.6.1.4.1.2636.4.1.5 | A jnxFruRemoval trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been removed from the chassis. | ||
| I32 jnxFruSlot | 1.3.6.1.4.1.2636.3.1.15.1.7 | Integer32 | read-only | The slot number of this subject. This is equivalent to jnxFruL1Index in meaning. Zero if unavailable or inapplicable. |
| INT jnxFruState | 1.3.6.1.4.1.2636.3.1.15.1.8 | INTEGER | read-only | The current state for this subject. |
| jnxFruTable | 1.3.6.1.4.1.2636.3.1.15 | not-accessible | A list of FRU status entries. | |
| G32 jnxFruTemp | 1.3.6.1.4.1.2636.3.1.15.1.9 | Gauge32 | read-only | The temperature in Celsius (degrees C) of this subject. Zero if unavailable or inapplicable. |
| INT jnxFruType | 1.3.6.1.4.1.2636.3.1.15.1.6 | INTEGER | read-only | The FRU type for this subject. |
| NTF jnxHardDiskFailed | 1.3.6.1.4.1.2636.4.1.14 | A jnxHardDiskFailed trap signifies that the SNMP entity, acting in an agent role, has detected that the Disk in the specified Routing Engine has encountered some operational errors and gone into failed state in the chassis. | ||
| NTF jnxHardDiskMissing | 1.3.6.1.4.1.2636.4.1.15 | A DiskMissing trap signifies that the SNMP entity, acting in an agent role, has detected that hard disk in the specified outing Engine is missing from boot device list. | ||
| NTF jnxHardDiskOK | 1.3.6.1.4.1.2636.4.2.6 | A jnxHardDiskOK trap signifies that the SNMP entity, acting in an agent role, has detected that the Disk in the specified Routing Engine has recovered from the failure condition. | ||
| I32 jnxLEDAssociateIndex | 1.3.6.1.4.1.2636.3.1.10.1.2 | Integer32 | read-only | The index of the associated table that this entry is related. |
| INT jnxLEDAssociateTable | 1.3.6.1.4.1.2636.3.1.10.1.1 | INTEGER | read-only | The associated table that this entry is related. |
| STR jnxLEDDescr | 1.3.6.1.4.1.2636.3.1.10.1.7 | DisplayString | read-only | The name or detailed description of this subject. |
| jnxLEDEntry | 1.3.6.1.4.1.2636.3.1.10.1 | not-accessible | An entry of status table. | |
| I32 jnxLEDL1Index | 1.3.6.1.4.1.2636.3.1.10.1.3 | Integer32 | read-only | The level one index of the associated table that this entry is related. Zero if unavailable or inapplicable. |
| I32 jnxLEDL2Index | 1.3.6.1.4.1.2636.3.1.10.1.4 | Integer32 | read-only | The level two index of the associated table that this entry is related. Zero if unavailable or inapplicable. |
| I32 jnxLEDL3Index | 1.3.6.1.4.1.2636.3.1.10.1.5 | Integer32 | read-only | The level three index of the associated table that this entry is related. Zero if unavailable or inapplicable. |
| TIM jnxLEDLastChange | 1.3.6.1.4.1.2636.3.1.9 | TimeStamp | read-only | The value of sysUpTime when the box LED table last changed. Zero if unknown or already at that state when the agent was up. |
| OID jnxLEDOriginator | 1.3.6.1.4.1.2636.3.1.10.1.6 | OBJECT IDENTIFIER | read-only | The originator of the this entry. |
| INT jnxLEDState | 1.3.6.1.4.1.2636.3.1.10.1.8 | INTEGER | read-only | The state of the LED indicator. |
| INT jnxLEDStateOrdered | 1.3.6.1.4.1.2636.3.1.10.1.9 | INTEGER | read-only | The state of the LED indicator. Identical to jnxLEDState, but with enums ordered from 'most operational' to 'least operational' states. |
| jnxLEDTable | 1.3.6.1.4.1.2636.3.1.10 | not-accessible | A list of status entries. | |
| G32 jnxOperating15MinLoadAvg | 1.3.6.1.4.1.2636.3.1.13.1.22 | Gauge32 | read-only | The CPU Load Average over the last 15 minutes Here it will be shown as percentage value Zero if unavailable or inapplicable. |
| G32 jnxOperating1MinLoadAvg | 1.3.6.1.4.1.2636.3.1.13.1.20 | Gauge32 | read-only | The CPU Load Average over the last 1 minutes Here it will be shown as percentage value Zero if unavailable or inapplicable. |
| G32 jnxOperating5MinLoadAvg | 1.3.6.1.4.1.2636.3.1.13.1.21 | Gauge32 | read-only | The CPU Load Average over the last 5 minutes Here it will be shown as percentage value Zero if unavailable or inapplicable. |
| G32 jnxOperatingBuffer | 1.3.6.1.4.1.2636.3.1.13.1.11 | Gauge32 | read-only | The buffer pool utilization in percentage of this subject. Zero if unavailable or inapplicable. |
| STR jnxOperatingChassisDescr | 1.3.6.1.4.1.2636.3.1.13.1.18 | DisplayString | read-only | A textual description of the chassis on which the contents of this row exists. |
| JNX jnxOperatingChassisId | 1.3.6.1.4.1.2636.3.1.13.1.17 | JnxChassisId | read-only | Identifies the chassis on which the contents of this row exists. |
| I32 jnxOperatingContentsIndex | 1.3.6.1.4.1.2636.3.1.13.1.1 | Integer32 | read-only | The associated jnxContentsContainerIndex in the jnxContentsTable. |
| G32 jnxOperatingCPU | 1.3.6.1.4.1.2636.3.1.13.1.8 | Gauge32 | read-only | The CPU utilization in percentage of this subject. Zero if unavailable or inapplicable. |
| STR jnxOperatingDescr | 1.3.6.1.4.1.2636.3.1.13.1.5 | DisplayString | read-only | The name or detailed description of this subject. |
| I32 jnxOperatingDRAMSize | 1.3.6.1.4.1.2636.3.1.13.1.10 | Integer32 | read-only | The DRAM size in bytes of this subject. Zero if unavailable or inapplicable. |
| jnxOperatingEntry | 1.3.6.1.4.1.2636.3.1.13.1 | not-accessible | An entry of operating status table. | |
| G32 jnxOperatingHeap | 1.3.6.1.4.1.2636.3.1.13.1.12 | Gauge32 | read-only | The heap utilization in percentage of this subject. Zero if unavailable or inapplicable. |
| G32 jnxOperatingISR | 1.3.6.1.4.1.2636.3.1.13.1.9 | Gauge32 | read-only | The CPU utilization in percentage of this subject spending in interrupt service routine (ISR). Zero if unavailable or inapplicable. |
| I32 jnxOperatingL1Index | 1.3.6.1.4.1.2636.3.1.13.1.2 | Integer32 | read-only | The level one index associated with this subject. Zero if unavailable or inapplicable. |
| I32 jnxOperatingL2Index | 1.3.6.1.4.1.2636.3.1.13.1.3 | Integer32 | read-only | The level two index associated with this subject. Zero if unavailable or inapplicable. |
| I32 jnxOperatingL3Index | 1.3.6.1.4.1.2636.3.1.13.1.4 | Integer32 | read-only | The level three index associated with this subject. Zero if unavailable or inapplicable. |
| TIM jnxOperatingLastRestart | 1.3.6.1.4.1.2636.3.1.13.1.14 | TimeStamp | read-only | The value of sysUpTime when this subject last restarted. Zero if unavailable or inapplicable. |
| I32 jnxOperatingMemory | 1.3.6.1.4.1.2636.3.1.13.1.15 | Integer32 | read-only | The installed memory size in Megabytes of this subject. Zero if unavailable or inapplicable. |
| DAT jnxOperatingRestartTime | 1.3.6.1.4.1.2636.3.1.13.1.19 | DateAndTime | read-only | The time at which this entity last restarted. |
| INT jnxOperatingState | 1.3.6.1.4.1.2636.3.1.13.1.6 | INTEGER | read-only | The operating state of this subject. |
| INT jnxOperatingStateOrdered | 1.3.6.1.4.1.2636.3.1.13.1.16 | INTEGER | read-only | The operating state of this subject. Identical to jnxOperatingState, but with enums ordered from 'most operational' to 'least operational' states. |
| jnxOperatingTable | 1.3.6.1.4.1.2636.3.1.13 | not-accessible | A list of operating status entries. | |
| G32 jnxOperatingTemp | 1.3.6.1.4.1.2636.3.1.13.1.7 | Gauge32 | read-only | The temperature in Celsius (degrees C) of this subject. Zero if unavailable or inapplicable. |
| NUM jnxOperatingUpTime | 1.3.6.1.4.1.2636.3.1.13.1.13 | TimeInterval | read-only | The time interval in 10-millisecond period that this subject has been up and running. Zero if unavailable or inapplicable. |
| NTF jnxOverTemperature | 1.3.6.1.4.1.2636.4.1.3 | A jnxOverTemperature trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced over temperature condition. | ||
| NTF jnxPlaneCheck | 1.3.6.1.4.1.2636.4.1.22 | A jnxPlaneCheck trap signifies that the SNMP entity, acting in an agent role, has detected that the specified Fabric plane has encountered some operational errors and gone into check state in the chassis. | ||
| NTF jnxPlaneFault | 1.3.6.1.4.1.2636.4.1.23 | A jnxPlaneCheck trap signifies that the SNMP entity, acting in an agent role, has detected that the specified Fabric plane has encountered some operational errors and gone into fault state in the chassis. | ||
| NTF jnxPlaneOffline | 1.3.6.1.4.1.2636.4.1.20 | A jnxPlaneOffline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified Fabric plane has gone offline in the chassis. | ||
| NTF jnxPlaneOnline | 1.3.6.1.4.1.2636.4.1.21 | A jnxPlaneOnline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified Fabric Plane has gone online in the chassis. | ||
| NTF jnxPowerSupplyFailure | 1.3.6.1.4.1.2636.4.1.1 | A jnxPowerSupplyFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply in the chassis has been in the failure (bad DC output) condition. | ||
| NTF jnxPowerSupplyInputFailure | 1.3.6.1.4.1.2636.4.1.24 | A jnxPowerSupplyInputFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply's input feed in the chassis has been in the failure condition. | ||
| NTF jnxPowerSupplyInputOK | 1.3.6.1.4.1.2636.4.2.7 | A jnxPowerSupplyInputOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply's input feed in the chassis has recovered from the failure condition. | ||
| NTF jnxPowerSupplyOK | 1.3.6.1.4.1.2636.4.2.1 | A jnxPowerSupplyOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply in the chassis has recovered from the failure (bad DC output) condition. | ||
| STR jnxRedundancyChassisDescr | 1.3.6.1.4.1.2636.3.1.14.1.16 | DisplayString | read-only | A textual description of the chassis on which the contents of this row exists. |
| JNX jnxRedundancyChassisId | 1.3.6.1.4.1.2636.3.1.14.1.15 | JnxChassisId | read-only | Identifies the chassis on which the contents of this row exists. |
| INT jnxRedundancyConfig | 1.3.6.1.4.1.2636.3.1.14.1.6 | INTEGER | read-only | The election priority of redundancy configuration for this subject. The value 'notApplicable' means no specific instance is configured to be master or backup; whichever component boots up first becomes a master. |
| I32 jnxRedundancyContentsIndex | 1.3.6.1.4.1.2636.3.1.14.1.1 | Integer32 | read-only | The associated jnxContentsContainerIndex in the jnxContentsTable. |
| STR jnxRedundancyDescr | 1.3.6.1.4.1.2636.3.1.14.1.5 | DisplayString | read-only | The name or detailed description of this subject. |
| jnxRedundancyEntry | 1.3.6.1.4.1.2636.3.1.14.1 | not-accessible | An entry in the redundancy information table. | |
| I32 jnxRedundancyKeepaliveElapsed | 1.3.6.1.4.1.2636.3.1.14.1.13 | Integer32 | read-only | The elapsed time in seconds by this subject since receiving the last keepalive message from the other subsystems. Zero if unavailable or inapplicable. |
| I32 jnxRedundancyKeepaliveHeartbeat | 1.3.6.1.4.1.2636.3.1.14.1.11 | Integer32 | read-only | The period of sending keepalive messages between the master and backup subsystems. It is a system-wide preset value in seconds used by internal mastership resolution. Zero if unavailable or inapplicable. |
| C32 jnxRedundancyKeepaliveLoss | 1.3.6.1.4.1.2636.3.1.14.1.14 | Counter32 | read-only | The total number of losses on keepalive messages between the master and backup subsystems as perceived by this subject since the system is up and running. Zero if unavailable or inapplicable. |
| I32 jnxRedundancyKeepaliveTimeout | 1.3.6.1.4.1.2636.3.1.14.1.12 | Integer32 | read-only | The timeout period in seconds, by the keepalive watchdog timer, before initiating a switch over to the backup subsystem. Zero if unavailable or inapplicable. |
| I32 jnxRedundancyL1Index | 1.3.6.1.4.1.2636.3.1.14.1.2 | Integer32 | read-only | The level one index associated with this subject. Zero if unavailable or inapplicable. |
| I32 jnxRedundancyL2Index | 1.3.6.1.4.1.2636.3.1.14.1.3 | Integer32 | read-only | The level two index associated with this subject. Zero if unavailable or inapplicable. |
| I32 jnxRedundancyL3Index | 1.3.6.1.4.1.2636.3.1.14.1.4 | Integer32 | read-only | The level three index associated with this subject. Zero if unavailable or inapplicable. |
| INT jnxRedundancyState | 1.3.6.1.4.1.2636.3.1.14.1.7 | INTEGER | read-only | The current running state for this subject. |
| NTF jnxRedundancySwitchover | 1.3.6.1.4.1.2636.4.1.4 | A jnxRedundancySwitchover trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced a redundancy switchover event defined as a change in state of jnxRedundancyState from master to backup or vice versa. | ||
| C32 jnxRedundancySwitchoverCount | 1.3.6.1.4.1.2636.3.1.14.1.8 | Counter32 | read-only | The total number of switchover as perceived by this subject since routing engine is up and running. The switchover is defined as a change in state of jnxRedundancyState from master to backup or vice versa. Its value is reset when the routing engine is reset or rebooted. |
| INT jnxRedundancySwitchoverReason | 1.3.6.1.4.1.2636.3.1.14.1.10 | INTEGER | read-only | The reason of the last switchover for this subject. |
| TIM jnxRedundancySwitchoverTime | 1.3.6.1.4.1.2636.3.1.14.1.9 | TimeStamp | read-only | The value of sysUpTime when the jnxRedundancyState of this subject was last switched over from master to backup or vice versa. Zero if unknown or never switched over since the routing engine is up and running. |
| jnxRedundancyTable | 1.3.6.1.4.1.2636.3.1.14 | not-accessible | A list of redundancy information entries. | |
| NTF jnxTemperatureOK | 1.3.6.1.4.1.2636.4.2.3 | A jnxTemperatureOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has recovered from over temperature condition. |
RFC description
Defines enterprise-specific MIB objects supported by Juniper Networks Junos OS-based devices.
Start monitoring Juniper Networks Junos OS device (top-level enterprise MIB, any generation) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.