| OID symbolic | OID numeric | Type | Access | Description |
|---|
| jnxAtmCos | 1.3.6.1.4.1.2636.3.21 | | | The Juniper enterprise MIB for ATM COS (Class Of
Service) infrastructure. For detailed information on ATM
COS, Junos Documentation is recommended as the
reference.
Abbreviations:
COS - Class Of Service
RED - Random Early Detection
PLP - Packet Loss Priority |
| jnxCosAtmVcTable | 1.3.6.1.4.1.2636.3.21.1 | | not-accessible | A table of ATM VCs which have COS configured. |
| jnxCosAtmVcEntry | 1.3.6.1.4.1.2636.3.21.1.1 | | not-accessible | This entry contains COS info specific to an ATM VC.
Each entry is indexed using ifIndex, vpi and vci of
the VC. |
| INT jnxCosAtmVcCosMode | 1.3.6.1.4.1.2636.3.21.1.1.1 | INTEGER | read-only | The mode of COS queue priority for the VC.
strict mode :
One queue of the four queues has strict high priority and
is always serviced before the rest of the queues. The
remaining queues are serviced in round robin fashion.
alternate mode :
One queue has high priority, but the servicing of the
queues alternates between the high priority queue and the
rest of the queues. |
| jnxCosAtmVcScTable | 1.3.6.1.4.1.2636.3.21.2 | | not-accessible | A table of rows representing atm-scheduler config
parameters for each forwarding class within a specified VC.
NOTE: These schedulers are specific to an atm interface and
are different from the typical schedulers specified under
class-of-service config in CLI. Hence, hereafter, through
out this mib, scheduler will be referred to as atm-scheduler
to avoid any confusion. |
| jnxCosAtmVcScEntry | 1.3.6.1.4.1.2636.3.21.2.1 | | not-accessible | This entry represents atm-scheduler config parameters per
forwarding class and per VC. |
| INT jnxCosAtmVcScPriority | 1.3.6.1.4.1.2636.3.21.2.1.1 | INTEGER | read-only | The atm-scheduler priority for the queue associated with
the specified forwarding class within the specified VC. |
| INT jnxCosAtmVcScTxWeightType | 1.3.6.1.4.1.2636.3.21.2.1.2 | INTEGER | read-only | The atm-scheduler transmit-weight-type for the queue
associated with the specified forwarding class inside the
specified VC.
An atm-scheduler can specify the transmit-weight-type either
as number of cells or as a percentage of the queue size. |
| I32 jnxCosAtmVcScTxWeight | 1.3.6.1.4.1.2636.3.21.2.1.3 | Integer32 | read-only | The atm-scheduler's transmit weight for the queue
associated with the specified forwarding class and the
specified VC. This object value is either expressed in
units of cells or as a percentage of the total VC
bandwidth. The unit (value-type) can be determined using
the object jnxCosAtmVcScTxWeightType. |
| INT jnxCosAtmVcScDpType | 1.3.6.1.4.1.2636.3.21.2.1.4 | INTEGER | read-only | The type of RED drop profile configured for the specified
forwarding class within the specified VC. A scheduler can
specify either linear or constant drop profile.
A constant type drop profile (aka EPD) specifies that when
the number of queued cells exceeds a threshold, all the
cells should be dropped. Whereas a linear type drop profile
specifies that only a percentage of cells be dropped based
on the number of queued cells at any time. |
| I32 jnxCosAtmVcScLrdpQueueDepth | 1.3.6.1.4.1.2636.3.21.2.1.5 | Integer32 | read-only | The maximum queue size in cells, as specified by the linear
RED drop profile associated with the specified forwarding
class within the specified VC.
This object is valid only when value of object
jnxCosAtmVcScDpType is 'linearRed(0)'. |
| I32 jnxCosAtmVcScLrdpLowPlpThresh | 1.3.6.1.4.1.2636.3.21.2.1.6 | Integer32 | read-only | The threshold percentage of fill-level beyond which low PLP
(Packet Loss Priority) packets belonging to the specified
forwarding class within the specified VC are randomly
dropped. This value is specified by linear RED drop profile
config.
This object is valid only when value of object
jnxCosAtmVcScDpType is 'linearRed(0)'. |
| I32 jnxCosAtmVcScLrdpHighPlpThresh | 1.3.6.1.4.1.2636.3.21.2.1.7 | Integer32 | read-only | The threshold percentage of fill-level beyond which high
PLP (Packet Loss Priority) packets belonging to the
specified forwarding class within the specified VC are
randomly dropped. This value is specified by linear RED drop
profile config.
This object is valid only when jnxCosAtmVcScDpType is
'linearRed(0)'. |
| I32 jnxCosAtmVcEpdThreshold | 1.3.6.1.4.1.2636.3.21.2.1.8 | Integer32 | read-only | If a EPD type drop profile is configured for this scheduler
and if the number of cells queued exceeds this threshold
value, all the cells in the queue are dropped.
This object has valid value only when jnxCosAtmVcScDpType
is 'epd(1)'. |
| jnxCosAtmVcQstatsTable | 1.3.6.1.4.1.2636.3.21.3 | | not-accessible | A table of per VC and per forwarding class queue stats
entries. |
| jnxCosAtmVcQstatsEntry | 1.3.6.1.4.1.2636.3.21.3.1 | | not-accessible | This entry contains queue stats for a specified
forwarding class and specified VC. |
| C64 jnxCosAtmVcQstatsOutPackets | 1.3.6.1.4.1.2636.3.21.3.1.1 | Counter64 | read-only | The number of packets belonging to the specified
forwarding class transmitted on the specified VC. |
| C64 jnxCosAtmVcQstatsOutBytes | 1.3.6.1.4.1.2636.3.21.3.1.2 | Counter64 | read-only | The number of bytes belonging to the specified forwarding
class that were transmitted on the specified VC. |
| C64 jnxCosAtmVcQstatsOutRedDropPkts | 1.3.6.1.4.1.2636.3.21.3.1.3 | Counter64 | read-only | The number of outgoing packets on the specified VC and
belonging to the specified forwarding class, that were
RED-dropped. |
| C64 jnxCosAtmVcQstatsOutNonRedDrops | 1.3.6.1.4.1.2636.3.21.3.1.4 | Counter64 | read-only | The number of outgoing packets on the specified VC and
belonging to the specified forwarding class, that were
dropped not as a result of RED mechanism, but because of
errors in packets. |
| C64 jnxCosAtmVcQstatsOutLpBytes | 1.3.6.1.4.1.2636.3.21.3.1.5 | Counter64 | read-only | The number of low PLP (PLP0) bytes transmitted. |
| C64 jnxCosAtmVcQstatsOutLpPkts | 1.3.6.1.4.1.2636.3.21.3.1.6 | Counter64 | read-only | The number of low PLP (PLP0) packets transmitted. |
| C64 jnxCosAtmVcQstatsOutLpDropBytes | 1.3.6.1.4.1.2636.3.21.3.1.7 | Counter64 | read-only | The number of low PLP (PLP0) bytes dropped at the output
queue. |
| C64 jnxCosAtmVcQstatsOutHpDropBytes | 1.3.6.1.4.1.2636.3.21.3.1.8 | Counter64 | read-only | The number of high PLP (PLP1) bytes dropped at the output
queue. |
| C64 jnxCosAtmVcQstatsOutLpDropPkts | 1.3.6.1.4.1.2636.3.21.3.1.9 | Counter64 | read-only | The number of low PLP (PLP0) packets dropped at the
output queue. |
| C64 jnxCosAtmVcQstatsOutHpDropPkts | 1.3.6.1.4.1.2636.3.21.3.1.10 | Counter64 | read-only | The number of high PLP (PLP1) packets dropped at the
output queue. |
| jnxCosAtmTrunkTable | 1.3.6.1.4.1.2636.3.21.4 | | not-accessible | A table of all ATM Trunk CoS entries. Stats and configuration
information is provided for each ATM Trunk CoS interface. |
| jnxCosAtmTrunkEntry | 1.3.6.1.4.1.2636.3.21.4.1 | | not-accessible | A single ATM Trunk CoS Entry. |
| INT jnxCosAtmTrunkMode | 1.3.6.1.4.1.2636.3.21.4.1.1 | INTEGER | read-only | The mode of COS queue priority for the Trunk.
strict mode :
One queue of the four queues has strict high priority and
is always serviced before the rest of the queues. The
remaining queues are serviced in round robin fashion.
alternate mode :
One queue has high priority, but the servicing of the
queues alternates between the high priority queue and the
rest of the queues. |
| INT jnxCosAtmTrunkScPriority | 1.3.6.1.4.1.2636.3.21.4.1.2 | INTEGER | read-only | The atm-scheduler priority for the queue associated with
the specified forwarding class within the specified Trunk. |
| INT jnxCosAtmTrunkScTxWeightType | 1.3.6.1.4.1.2636.3.21.4.1.3 | INTEGER | read-only | The atm-scheduler transmit-weight-type for the queue
associated with the specified forwarding class inside the
specified Trunk.
An atm-scheduler can specify the transmit-weight-type either
as number of cells or as a percentage of the queue size. |
| I32 jnxCosAtmTrunkScTxWeight | 1.3.6.1.4.1.2636.3.21.4.1.4 | Integer32 | read-only | The atm-scheduler's transmit weight for the queue
associated with the specified forwarding class and the
specified Trunk. This object value is either expressed in
units of cells or as a percentage of the total Trunk
bandwidth. The unit (value-type) can be determined using
the object jnxCosAtmTrunkScTxWeightType. |
| INT jnxCosAtmTrunkQaType | 1.3.6.1.4.1.2636.3.21.4.1.5 | INTEGER | read-only | The atm queue admission type used for the specified Trunk. |
| I32 jnxCosAtmTrunkEpdThresholdPlp0 | 1.3.6.1.4.1.2636.3.21.4.1.6 | Integer32 | read-only | If an EPD type drop profile is configured for this
scheduler and if the number of cells queued exceeds this
threshold value, all the cells which have plp equal to 0
will be dropped.
This object has valid value only when jnxCosAtmTrunkQaType
is singleEpd or dualEpd. |
| I32 jnxCosAtmTrunkEpdThresholdPlp1 | 1.3.6.1.4.1.2636.3.21.4.1.7 | Integer32 | read-only | If a EPD type drop profile is configured for this scheduler
and if the number of cells queued exceeds this threshold
value, all the cells which have plp equal to 1 will be
dropped.
This object has valid value only when jnxCosAtmTrunkQaType
is dualEpd. |
| C64 jnxCosAtmTrunkQstatsOutPackets | 1.3.6.1.4.1.2636.3.21.4.1.8 | Counter64 | read-only | The number of packets belonging to the specified
forwarding class transmitted on the specified Trunk. |
| C64 jnxCosAtmTrunkQstatsOutBytes | 1.3.6.1.4.1.2636.3.21.4.1.9 | Counter64 | read-only | The number of bytes belonging to the specified forwarding
class that were transmitted on the specified Trunk. |
| C64 jnxCosAtmTrunkQstatsOutDrops | 1.3.6.1.4.1.2636.3.21.4.1.10 | Counter64 | read-only | The number of outgoing packets on the specified Trunk and
belonging to the specified forwarding class, that were
dropped. |
| C64 jnxCosAtmTrunkQstatsOutLpBytes | 1.3.6.1.4.1.2636.3.21.4.1.11 | Counter64 | read-only | The number of low PLP (PLP0) bytes transmitted. |
| C64 jnxCosAtmTrunkQstatsOutLpPkts | 1.3.6.1.4.1.2636.3.21.4.1.12 | Counter64 | read-only | The number of low PLP (PLP0) packets transmitted. |
| C64 jnxCosAtmTrunkQstatsOutLpDropBytes | 1.3.6.1.4.1.2636.3.21.4.1.13 | Counter64 | read-only | The number of low PLP (PLP0) bytes dropped at the output
queue. |
| C64 jnxCosAtmTrunkQstatsOutHpDropBytes | 1.3.6.1.4.1.2636.3.21.4.1.14 | Counter64 | read-only | The number of high PLP (PLP1) bytes dropped at the output
queue. |
| C64 jnxCosAtmTrunkQstatsOutLpDropPkts | 1.3.6.1.4.1.2636.3.21.4.1.15 | Counter64 | read-only | The number of low PLP (PLP0) packets dropped at the
output queue. |
| C64 jnxCosAtmTrunkQstatsOutHpDropPkts | 1.3.6.1.4.1.2636.3.21.4.1.16 | Counter64 | read-only | The number of high PLP (PLP1) packets dropped at the
output queue. |
| C64 jnxCosAtmTrunkQstatsOutHpBytes | 1.3.6.1.4.1.2636.3.21.4.1.17 | Counter64 | read-only | The number of high PLP (PLP1) bytes transmitted. |
| C64 jnxCosAtmTrunkQstatsOutHpPkts | 1.3.6.1.4.1.2636.3.21.4.1.18 | Counter64 | read-only | The number of high PLP (PLP1) packets transmitted. |
