Juniper-ACCOUNTING-MIB

All MIBs › Juniper-ACCOUNTING-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2009-07-16

Category: Domain: Subscriber Management, Vendor: Juniper

Description: Defines managed objects for accounting data collection and export on Juniper Networks E-series routers, including session and traffic records.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Juniper-ACCOUNTING-MIB?

Juniper-ACCOUNTING-MIB is a Juniper Networks enterprise MIB that defines managed objects for configuring and monitoring usage accounting data collection and export on Juniper E-series routers. It exposes categories of data covering per-interface accounting selection criteria, accounting record/file format, and policy-based accounting assignment, and it explicitly augments the Virtual Router Accounting MIB. It is mainly used to monitor the software-level status of the accounting subsystem: whether accounting is enabled for a given interface or subtree, what selection policy and mode apply, and whether interface create/delete events are being tracked for statistics purposes. It has a notable dependency on the Juniper Virtual Router Accounting MIB, which it augments rather than replaces. It is deployed on E-series edge routers used for subscriber or traffic-based billing and usage reporting, and network engineers can download the Juniper-ACCOUNTING-MIB file to load it into their MIB browser for reference.

IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-ACCOUNTING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper E-series routers

Monitoring Examples

An operator inspects rows of juniAcctngSelectionTable/juniAcctngSelectionEntry to confirm the juniAcctngSelectionType, juniAcctngSelectionMode, and juniAcctngSelectionPolicyName applied to a given interface subtree, verifying accounting is actually active where expected. juniAcctngFileFormat is checked to confirm exported accounting records are being generated in the expected format, and juniAcctngSelectionIfCreateDeleteStats reveals whether interface churn (creation/deletion) is being counted as part of the accounting policy.

What Can Be Monitored

accounting selection status per interface
accounting record/file format
accounting policy assignment
interface create/delete statistics
interface numbering mode

Imported Objects

From ACCOUNTING-CONTROL-MIB

acctngFileEntry	OBJECT-TYPE
acctngSelectionEntry	OBJECT-TYPE
acctngSelectionIndex	OBJECT-TYPE

From IF-MIB

InterfaceIndex

From Juniper-MIBs

juniMibs

MODULE-IDENTITY

From Juniper-POLICY-MIB

JuniPolicyAttachmentType

From Juniper-TC

JuniAcctngAdminType
JuniAcctngOperType
JuniEnable
JuniInterfaceDescrFormat
JuniInterfaceLocation

From Juniper-UNI-IF-MIB

juniIfType

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
juniAcctngMIB	1.3.6.1.4.1.4874.2.2.24			The accounting MIB for the Juniper Networks enterprise. This MIB augments with the Virtual Router Accounting MIB specified in RLI618.
juniAcctngMIBObjects	1.3.6.1.4.1.4874.2.2.24.1
juniAcctngSelectionControl	1.3.6.1.4.1.4874.2.2.24.1.1
juniAcctngSelectionTable	1.3.6.1.4.1.4874.2.2.24.1.1.1		not-accessible	A list of accounting information selection entries. Note that additions, modifications and deletions of entries in this table can occur at any time, but such changes only take effect on the next occasion when collection begins into a new interval. Thus, between modification and the next 'swap', the content of this table does not reflect the current selection.
juniAcctngSelectionEntry	1.3.6.1.4.1.4874.2.2.24.1.1.1.1		not-accessible	An entry used to extend the the selection entry in acctngSelectionEntry. This conceptual row extension is used for Juniper accounting extensions for connectionless data collection.
BIT juniAcctngSelectionType	1.3.6.1.4.1.4874.2.2.24.1.1.1.1.1	Bits	read-write	Indicates the types of connections for which the information selected by this entry are to be collected. The ietfAccountControl(0) bit position indicates that the ACCOUNTING-CONTROL-MIB.acctngSelectionType in the base conceptual row determines the selection type. All other bit positions for this object over-ride the acctngSelectionType in the base conceptual row. When the value of this object over-rides the acctngSelectionType object, the following objects have no meaning: ACCOUNTING-CONTROL-MIB.acctngFileCollectFailedAttempts ACCOUNTING-CONTROL-MIB.acctngFileMinAge because they control or are related to connection oriented accounting.
INT juniAcctngSelectionMode	1.3.6.1.4.1.4874.2.2.24.1.1.1.1.2	INTEGER	read-write	Indicates the data collection mode.
INT juniAcctngSelectionSubtreeType	1.3.6.1.4.1.4874.2.2.24.1.1.1.1.3	INTEGER	read-only	Indicates the origin of the collection, given the row's subtree. The architecture implementation for statistics collection imposes that rows with distinct juniAcctngSelectionSubtreeType may not be collected into the same accounting file. Conversely, different files (configured from acctngSelectionFile) entries are necessary in order to collect from subtrees (configured from acctngSelectionSubtree) that imply into different subtree types (juniAcctngSelectionSubtreeType).
I32 juniAcctngSelectionMaxIfStackLevels	1.3.6.1.4.1.4874.2.2.24.1.1.1.1.4	Integer32	read-write	Indicates the maximum number of levels in the ifStack table to be returned when using the ifStack accounting schema. This object is ignored if acctngSelectionSubtree is not set to juniAcctngSelectionSchemaIfStack. When this object is zero, the entire stack above the starting point(s) given will be returned. When this object is set to 1, only ifIndexes stacked above the starting point(s) given will be returned.
STR juniAcctngSelectionPolicyName	1.3.6.1.4.1.4874.2.2.24.1.1.1.1.5	DisplayString	read-write	Specifies the name of the policy associated with the statistics collected when using the policy accounting schema. This object is ignored if acctngSelectionSubtree is not set to juniAcctngSelectionSchemaPolicy.
JUN juniAcctngSelectionPolicyType	1.3.6.1.4.1.4874.2.2.24.1.1.1.1.6	JuniPolicyAttachmentType	read-write	Specifies the attachment point for the policy associated with the statistics collected when using the policy accounting schema. This object is ignored if acctngSelectionSubtree is not set to juniAcctngSelectionSchemaPolicy.
JUN juniAcctngSelectionIfCreateDeleteStats	1.3.6.1.4.1.4874.2.2.24.1.1.1.1.7	JuniEnable	read-write	Enable/disable interfaces create and delete statistics collection.
BIT juniAcctngSelectionIfCreateDeleteStatsIfTypes	1.3.6.1.4.1.4874.2.2.24.1.1.1.1.8	Bits	read-write	The interface-types that are used in the configuration of the create/delete statistics collection. Allowed interface-types are IP, ATM1483, PPP and VLAN. These interface-types are allowed to configure if the interfaces create/delete stats feature is enabled i.e juniAcctngSelectionIfCreateDeleteStats == enable.
juniAcctngSelectionIfStackStartTable	1.3.6.1.4.1.4874.2.2.24.1.1.3		not-accessible	A list of ifIndexes to be used as starting point when using the ifStack selection schema. Note that additions, modifications and deletions of entries in this table can occur at any time, but such changes only take effect on the next occasion when collection begins into a new interval. Thus, between modification and the next 'swap', the content of this table does not reflect the current selection.
juniAcctngSelectionIfStackStartEntry	1.3.6.1.4.1.4874.2.2.24.1.1.3.1		not-accessible	An entry used to determine the starting point entry when using the ifStack schema.
NUM juniAcctngSelectionIfStackIfIndex	1.3.6.1.4.1.4874.2.2.24.1.1.3.1.1	InterfaceIndex	not-accessible	The ifIndex to be used as a starting point in the interface stack configuration. The interfaces to be returned in the ifStack schema will start from this value, going up.
ROW juniAcctngSelectionIfStackRowStatus	1.3.6.1.4.1.4874.2.2.24.1.1.3.1.2	RowStatus	read-create	Controls creation/deletion of entries in this table.
juniAcctngFileControl	1.3.6.1.4.1.4874.2.2.24.1.2
juniAcctngFileTable	1.3.6.1.4.1.4874.2.2.24.1.2.1		not-accessible	A unique value identifying the file transfer behavior and the the file to where accounting data is to be stored.
juniAcctngFileEntry	1.3.6.1.4.1.4874.2.2.24.1.2.1.1		not-accessible	An entry used to extend the file management of acctngFileEntry. This conceptual row extension is used for Juniper accounting extensions to automate the transfer of accounting data to remote hosts.
INT juniAcctngFileXferMode	1.3.6.1.4.1.4874.2.2.24.1.2.1.1.1	INTEGER	read-write	Indicates the mode to use for transfering accounting data to remote client. juniAcctngManualTransfer - Administrator is responsible for manually transfering collected accounting data off of the system. juniAcctngAutomatedTransfer - The agent will automatically transfer the collected accounting data based at a acctngFileIntervals using an entry in the juniFileXferTable pointed to by juniAcctngFileXferIndex. If a manager sets this object to this value, a corresponding row in the juniFileXferTable must exist, otherwise the set command will fail. juniActngTransferOnFileFull - The agent will automatically transfer the collected accounting data when the file reaches the maximum size defined by acctngFileMaximumSize. If a manager sets this object to this value, a corresponding row in the juniFileXferTable must exist, otherwise the set command will fail. juniAcctngRedundantTransfer - The agent will automatically transfer two copies of the accounting data based on the acctngFileInterval. One copy will go to the juniFileXferTable entry identified by juniAcctngFileXferIndex and one copy will go the the juniFileXferTable entry identified by juniAcctngFileXferSecondaryIndex.
INT juniAcctngFileXferIndex	1.3.6.1.4.1.4874.2.2.24.1.2.1.1.2	INTEGER	read-write	Identifies an entry in the juniFileXferTable, which defines the file transfer parameters to use when the agent is configured to automatically transfer collected accounting data files. A set to this object will fail if a corresponding entry in the juniFileXferTable does not exist or it is not set to juniFileXferAcctngStatistics.
INT juniAcctngFileXferSecondaryIndex	1.3.6.1.4.1.4874.2.2.24.1.2.1.1.3	INTEGER	read-write	Identifies a backup or secondary entry in the juniFileXferTable, which defines the file transfer parameters to use when the agent is configured to automatically transfer collected accounting data files. A set to this object will fail if a corresponding entry in the juniFileXferTable does not exist or it is not set to juniFileXferAcctngStatistics.
juniAcctngInterfaceControl	1.3.6.1.4.1.4874.2.2.24.1.3
juniAcctngObsInterfaceTable	1.3.6.1.4.1.4874.2.2.24.1.3.1		not-accessible	This table was obsoleted when the indexing changed.
juniAcctngObsInterfaceEntry	1.3.6.1.4.1.4874.2.2.24.1.3.1.1		not-accessible	Obsolete table entry.
NUM juniAcctngObsInterfaceAdminStatus	1.3.6.1.4.1.4874.2.2.24.1.3.1.1.1	JuniAcctngAdminType	read-create	Obsolete object.
JUN juniAcctngObsInterfaceOperStatus	1.3.6.1.4.1.4874.2.2.24.1.3.1.1.2	JuniAcctngOperType	read-only	Obsolete object.
ROW juniAcctngObsInterfaceRowStatus	1.3.6.1.4.1.4874.2.2.24.1.3.1.1.3	RowStatus	read-create	Obsolete object.
I32 juniAcctngObsInterfaceAccntgFileIndex	1.3.6.1.4.1.4874.2.2.24.1.3.1.1.4	Integer32	read-create	Obsolete object.
juniAcctngInterfaceTable	1.3.6.1.4.1.4874.2.2.24.1.3.2		not-accessible	A table controlling the collection of accounting data on specific interfaces types. This table provides an efficient mechanism to enable and/or disable data collection on all interfaces of a specified type. This table replaces the obsolete version with the same name.
juniAcctngInterfaceEntry	1.3.6.1.4.1.4874.2.2.24.1.3.2.1		not-accessible	An entry which controls whether accounting data is to be collected on interfaces of a specific type, to a specific accounting file and by the systems interface location.
I32 juniAcctngInterfaceFileIndex	1.3.6.1.4.1.4874.2.2.24.1.3.2.1.1	Integer32	not-accessible	This object selects the acctngFileTable entry for the collection statistics for this interface type. The value of this object is the same as the acctngFileIndex and is used to cross reference accounting data files in the AcctngFileTable. If the value of this object is zero (special value), then the combined interface type/location defined by this entry is collected into all entries in the acctngFileTable, i.e., all accounting files.
NUM juniAcctngInterfaceLocation	1.3.6.1.4.1.4874.2.2.24.1.3.2.1.2	JuniInterfaceLocation	not-accessible	The interface location specification for this entry. If the value of this entry is a zero length string, then all system locations are included for the interface type defined by juniIfType.
NUM juniAcctngInterfaceAdminStatus	1.3.6.1.4.1.4874.2.2.24.1.3.2.1.3	JuniAcctngAdminType	read-create	The desired administrative state for accounting data collection for interfaces defined by the type of this entry. The administrative scope is for all interfaces of the type defined by the corresponding juniIfType for this entry.
JUN juniAcctngInterfaceOperStatus	1.3.6.1.4.1.4874.2.2.24.1.3.2.1.4	JuniAcctngOperType	read-only	The operational state for accounting data collection on for all interfaces corresponding to this entries type.
ROW juniAcctngInterfaceRowStatus	1.3.6.1.4.1.4874.2.2.24.1.3.2.1.5	RowStatus	read-create	Controls creation/deletion of entries in this table.
juniAcctngIfFinalStatsXferStatsTable	1.3.6.1.4.1.4874.2.2.24.1.3.3		not-accessible	A table to display line cards interfaces final statistics transfer statistics.
juniAcctngIfFinalStatsXferStatsEntry	1.3.6.1.4.1.4874.2.2.24.1.3.3.1		not-accessible	An entry is a display of one line card's interfaces final statistics transfer statistics.
I32 juniAcctngIfFinalStatsXferStatsSlotNumber	1.3.6.1.4.1.4874.2.2.24.1.3.3.1.1	Integer32	not-accessible	This object selects the slot number to display interfaces final statistics transfer statistics for the line module on that slot.
U32 juniAcctngIfFinalStatsXferStatsReceived	1.3.6.1.4.1.4874.2.2.24.1.3.3.1.2	Unsigned32	read-only	Count of the total received interfaces final statistics records for the line module.
U32 juniAcctngIfFinalStatsXferStatsTransferred	1.3.6.1.4.1.4874.2.2.24.1.3.3.1.3	Unsigned32	read-only	Count of the total transferred interfaces final statistics records for the line module.
U32 juniAcctngIfFinalStatsXferStatsDropped	1.3.6.1.4.1.4874.2.2.24.1.3.3.1.4	Unsigned32	read-only	Count of the total dropped interfaces final statistics records for the line module.
juniAcctngScalarGroup	1.3.6.1.4.1.4874.2.2.24.1.4
NUM juniAcctngInterfaceDescrFormat	1.3.6.1.4.1.4874.2.2.24.1.4.1	JuniInterfaceDescrFormat	read-write	The format of the interface descriptions reported by the accounting application.
INT juniAcctngInterfaceNumberingMode	1.3.6.1.4.1.4874.2.2.24.1.4.2	INTEGER	read-write	The format of the interface descriptions reported by the accounting application.
INT juniAcctngFileFormat	1.3.6.1.4.1.4874.2.2.24.1.4.3	INTEGER	read-write	The file format of the accounting file.
juniAcctngVirtualRouterControl	1.3.6.1.4.1.4874.2.2.24.1.5
juniAcctngVirtualRouterTable	1.3.6.1.4.1.4874.2.2.24.1.5.1		not-accessible	This Table stores the configuration of Virtual Routers per collector (File Index) basis. Multiple Virtual Routers can be configured per collector (file index)
juniAcctngVirtualRouterTableEntry	1.3.6.1.4.1.4874.2.2.24.1.5.1.1		not-accessible	An entry used to determine the starting point entry when using the ifStack schema.
I32 juniAcctngVirtualRouterTableIndex	1.3.6.1.4.1.4874.2.2.24.1.5.1.1.1	Integer32	read-only	This Index to be used as a starting point in the Virtual Router Table configuration. The index to be returned in the Virtual Router Table will start from this value, going up.
STR juniAcctngVirtualRouterTableVRName	1.3.6.1.4.1.4874.2.2.24.1.5.1.1.2	DisplayString	read-create	Virtual Router name(s) space separated.
ROW juniAcctngVirtualRouterTableRowStatus	1.3.6.1.4.1.4874.2.2.24.1.5.1.1.3	RowStatus	read-create	Controls creation/deletion of entries in this table.
juniAcctngSelectionSchema	1.3.6.1.4.1.4874.2.2.24.2			The root OBJECT IDENTIFIER under which accounting selection tree objects are assigned.
juniAcctngSelectionSchemaIf	1.3.6.1.4.1.4874.2.2.24.2.1
juniAcctngIfInOctets	1.3.6.1.4.1.4874.2.2.24.2.1.1
juniAcctngIfInUcastPkts	1.3.6.1.4.1.4874.2.2.24.2.1.2
juniAcctngIfInDiscards	1.3.6.1.4.1.4874.2.2.24.2.1.3
juniAcctngIfInErrors	1.3.6.1.4.1.4874.2.2.24.2.1.4
juniAcctngIfInUnknownProtos	1.3.6.1.4.1.4874.2.2.24.2.1.5
juniAcctngIfOutOctets	1.3.6.1.4.1.4874.2.2.24.2.1.6
juniAcctngIfOutUcastPkts	1.3.6.1.4.1.4874.2.2.24.2.1.7
juniAcctngIfOutDiscards	1.3.6.1.4.1.4874.2.2.24.2.1.8
juniAcctngIfOutErrors	1.3.6.1.4.1.4874.2.2.24.2.1.9
juniAcctngIfCorrelator	1.3.6.1.4.1.4874.2.2.24.2.1.10
juniAcctngIfInPolicedOctets	1.3.6.1.4.1.4874.2.2.24.2.1.11
juniAcctngIfInPolicedPkts	1.3.6.1.4.1.4874.2.2.24.2.1.12
juniAcctngIfInSpoofedPkts	1.3.6.1.4.1.4874.2.2.24.2.1.13
juniAcctngIfOutPolicedOctets	1.3.6.1.4.1.4874.2.2.24.2.1.14
juniAcctngIfOutPolicedPkts	1.3.6.1.4.1.4874.2.2.24.2.1.15
juniAcctngIfOutSchedulerDropOctets	1.3.6.1.4.1.4874.2.2.24.2.1.16
juniAcctngIfOutSchedulerDropPkts	1.3.6.1.4.1.4874.2.2.24.2.1.17
juniAcctngIfLowerInterface	1.3.6.1.4.1.4874.2.2.24.2.1.18
juniAcctngIfTimeOffset	1.3.6.1.4.1.4874.2.2.24.2.1.19
juniAcctngifInMulticastPkts	1.3.6.1.4.1.4874.2.2.24.2.1.20
juniAcctngifInBroadcastPkts	1.3.6.1.4.1.4874.2.2.24.2.1.21
juniAcctngifOutMulticastPkts	1.3.6.1.4.1.4874.2.2.24.2.1.22
juniAcctngifOutBroadcastPkts	1.3.6.1.4.1.4874.2.2.24.2.1.23
juniAcctngSelectionSchemaIfStack	1.3.6.1.4.1.4874.2.2.24.2.3
juniAcctngSelectionSchemaSystem	1.3.6.1.4.1.4874.2.2.24.2.4
juniAcctngSelectionSchemaPolicy	1.3.6.1.4.1.4874.2.2.24.2.5
juniAcctngGreenPackets	1.3.6.1.4.1.4874.2.2.24.2.5.1
juniAcctngUpperGreenPackets	1.3.6.1.4.1.4874.2.2.24.2.5.2
juniAcctngYellowPackets	1.3.6.1.4.1.4874.2.2.24.2.5.3
juniAcctngUpperYellowPackets	1.3.6.1.4.1.4874.2.2.24.2.5.4
juniAcctngRedPackets	1.3.6.1.4.1.4874.2.2.24.2.5.5
juniAcctngUpperRedPackets	1.3.6.1.4.1.4874.2.2.24.2.5.6
juniAcctngGreenBytes	1.3.6.1.4.1.4874.2.2.24.2.5.7
juniAcctngUpperGreenBytes	1.3.6.1.4.1.4874.2.2.24.2.5.8
juniAcctngYellowBytes	1.3.6.1.4.1.4874.2.2.24.2.5.9
juniAcctngUpperYellowBytes	1.3.6.1.4.1.4874.2.2.24.2.5.10
juniAcctngRedBytes	1.3.6.1.4.1.4874.2.2.24.2.5.11
juniAcctngUpperRedBytes	1.3.6.1.4.1.4874.2.2.24.2.5.12
juniAcctngSelectionSchemaIgmp	1.3.6.1.4.1.4874.2.2.24.2.6
juniAcctngIgmpLowerIndex	1.3.6.1.4.1.4874.2.2.24.2.6.1
juniAcctngIgmpRouterIndex	1.3.6.1.4.1.4874.2.2.24.2.6.2
juniAcctngIgmpDestAddr	1.3.6.1.4.1.4874.2.2.24.2.6.3
juniAcctngIgmpSourceIndex	1.3.6.1.4.1.4874.2.2.24.2.6.4
juniAcctngIgmpMulticastGroup	1.3.6.1.4.1.4874.2.2.24.2.6.5
juniAcctngIgmpLowerIgmpCommand	1.3.6.1.4.1.4874.2.2.24.2.6.6
juniAcctngIgmpLowerTimeStamp	1.3.6.1.4.1.4874.2.2.24.2.6.7
juniAcctngSelectionSchemaQos	1.3.6.1.4.1.4874.2.2.24.2.7
juniAcctngParentShapingRate	1.3.6.1.4.1.4874.2.2.24.2.7.1
juniAcctngParentSharedShapRate	1.3.6.1.4.1.4874.2.2.24.2.7.2
juniAcctngParentChildWeight	1.3.6.1.4.1.4874.2.2.24.2.7.3
juniAcctngQueueLength	1.3.6.1.4.1.4874.2.2.24.2.7.4
juniAcctngForwardedRate	1.3.6.1.4.1.4874.2.2.24.2.7.5
juniAcctngAggDropRate	1.3.6.1.4.1.4874.2.2.24.2.7.6
juniAcctngForwardedPackets	1.3.6.1.4.1.4874.2.2.24.2.7.7
juniAcctngForwardedBytes	1.3.6.1.4.1.4874.2.2.24.2.7.8
juniAcctngGreenDropPackets	1.3.6.1.4.1.4874.2.2.24.2.7.9
juniAcctngGreenDropBytes	1.3.6.1.4.1.4874.2.2.24.2.7.10
juniAcctngYellowDropPackets	1.3.6.1.4.1.4874.2.2.24.2.7.11
juniAcctngYellowDropBytes	1.3.6.1.4.1.4874.2.2.24.2.7.12
juniAcctngRedDropPackets	1.3.6.1.4.1.4874.2.2.24.2.7.13
juniAcctngRedDropBytes	1.3.6.1.4.1.4874.2.2.24.2.7.14
juniAcctngDropProfile	1.3.6.1.4.1.4874.2.2.24.2.7.15
juniAcctngQueueProfile	1.3.6.1.4.1.4874.2.2.24.2.7.16
juniAcctngSchedulerProfile	1.3.6.1.4.1.4874.2.2.24.2.7.17
juniAcctngStatisticsProfile	1.3.6.1.4.1.4874.2.2.24.2.7.18
juniAcctngShapingMode	1.3.6.1.4.1.4874.2.2.24.2.7.19
juniAcctngShapingRate	1.3.6.1.4.1.4874.2.2.24.2.7.20
juniAcctngBurst	1.3.6.1.4.1.4874.2.2.24.2.7.21
juniAcctngAssuredRate	1.3.6.1.4.1.4874.2.2.24.2.7.22
juniAcctngWeight	1.3.6.1.4.1.4874.2.2.24.2.7.23
juniAcctngRedEnabled	1.3.6.1.4.1.4874.2.2.24.2.7.24
juniAcctngSharedShapingMode	1.3.6.1.4.1.4874.2.2.24.2.7.25
juniAcctngSharedShapingRate	1.3.6.1.4.1.4874.2.2.24.2.7.26
juniAcctngByteAdjType	1.3.6.1.4.1.4874.2.2.24.2.7.27
juniAcctngByteAdjBytes	1.3.6.1.4.1.4874.2.2.24.2.7.28
juniAcctngConformance	1.3.6.1.4.1.4874.2.2.24.3
juniAcctngGroups	1.3.6.1.4.1.4874.2.2.24.3.1
juniAcctngBasicGroup	1.3.6.1.4.1.4874.2.2.24.3.1.1			Obsolete collection of objects providing control of the basic collection of accounting data for connection-less networks. This group became obsolete when juniAcctngSelectionSubtreeType was deprecated.
juniAcctngBasicGroup2	1.3.6.1.4.1.4874.2.2.24.3.1.2			Obsolete collection of objects providing control of the basic collection of accounting data for connection-less networks. This group became obsolete when selection policy name and type objects were added.
juniAcctngBasicGroup3	1.3.6.1.4.1.4874.2.2.24.3.1.3			Obsolete collection of objects providing control of the basic collection of accounting data for connection-less networks. This group became obsolete when the inteface control table was modified.
juniAcctngDeprecatedGroup	1.3.6.1.4.1.4874.2.2.24.3.1.4			This group contains a deprecated object that is no longer recommended but may still be supported on some implemtations for backward compatibility.
juniAcctngBasicGroup4	1.3.6.1.4.1.4874.2.2.24.3.1.5			Obsolete collection of objects providing control of the basic collection of accounting data for connection-less networks. This group became obsolete when the selection control table was modified.
juniAcctngBasicGroup5	1.3.6.1.4.1.4874.2.2.24.3.1.6			A collection of objects providing control of the basic collection of accounting data for connection-less networks.
juniAcctngBasicGroup6	1.3.6.1.4.1.4874.2.2.24.3.1.7			A collection of objects providing control of the Virtual Router based accounting.
juniAcctngCompliances	1.3.6.1.4.1.4874.2.2.24.3.2
juniAcctngCompliance	1.3.6.1.4.1.4874.2.2.24.3.2.1			Obsolete compliance statement for switches that implement the Juniper Accounting Control MIB. This statement became obsolete when the juniAcctngSelectionSubtreeType object was deprecated.
juniAcctngCompliance2	1.3.6.1.4.1.4874.2.2.24.3.2.2			Obsolete compliance statement for switches that implement the Juniper Accounting Control MIB. This statement became obsolete when selection policy name and type objects were added.
juniAcctngCompliance3	1.3.6.1.4.1.4874.2.2.24.3.2.3			Obsolete compliance statement for switches that implement the Juniper Accounting Control MIB. This statement became obsolete when the interface control table was modified.
juniAcctngCompliance4	1.3.6.1.4.1.4874.2.2.24.3.2.4			Obsolete compliance statement for switches that implement the Juniper Accounting Control MIB. This statement became obsolete when the selection control table was modified.
juniAcctngCompliance5	1.3.6.1.4.1.4874.2.2.24.3.2.5			The compliance statement for switches that implement the Juniper Accounting Control MIB.
juniAcctngCompliance6	1.3.6.1.4.1.4874.2.2.24.3.2.6			The compliance statement for switches that implement the Juniper Accounting Control MIB.

RFC description

Tracks network accounting data including virtual router usage, file formats, and schema-based statistics.

Start monitoring Juniper E-series router (usage accounting data collection/export) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Juniper-ACCOUNTING-MIB

What Is Juniper-ACCOUNTING-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description