JUNIPER-LSYSSP-CPU-MIB

All MIBs › JUNIPER-LSYSSP-CPU-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2010-05-19

Category: Domain: Server/Host Monitoring, Vendor: Juniper

Description: Provides managed objects for CPU resource limits and utilization per logical system security profile on Juniper Networks SRX devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is JUNIPER-LSYSSP-CPU-MIB?

This is a Juniper Networks enterprise MIB for CPU resource management within Logical System (LSYS) Security Profiles on Juniper SRX security devices, which support multi-tenant logical partitioning of a single physical firewall. No sample objects are available in this excerpt, so exact table names can't be confirmed, but by design such a "profile CPU" MIB would expose CPU quota limits and current CPU utilization per logical system, allowing an administrator to see how much processing resource each tenant/logical-system is consuming or is entitled to. This is directly a hardware/software performance-monitoring MIB in intent—tracking CPU load per logical system so operators can detect a tenant approaching or exceeding its allotted CPU quota, which could affect other tenants sharing the same physical SRX. It is a Juniper-specific extension tied to the broader LSYS security-profile framework rather than a direct extension of an IETF MIB. It is deployed on Juniper SRX devices configured with multiple logical systems for multi-tenant firewall/security services, where JUNIPER-LSYSSP-CPU-MIB SNMP monitoring helps operators track per-tenant CPU consumption.

IPNetwork Monitor allows you to monitor SNMP objects defined in JUNIPER-LSYSSP-CPU-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks SRX security devices (multi-tenant logical systems)

Monitoring Examples

No sample_objects are provided for this module, so no verified object or table names can be cited for a concrete polling scenario; an admin would expect a per-logical-system CPU utilization and quota-limit table here, but no such names are confirmed from source.

What Can Be Monitored

per-logical-system CPU utilization
CPU resource quota limits

Imported Objects

From JUNIPER-LSYS-SECURITYPROFILE-MIB

jnxLsysSpCPU

OBJECT-IDENTITY

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
jnxLsysSpCPUMIB	1.3.6.1.4.1.2636.3.39.1.17.18.1			This module defines the CPU-specific MIB for Juniper Enterprise Logical-System (LSYS) security profiles. Juniper documentation is recommended as the reference. The LSYS security profile provides various static and dynamic resource management by observing resource quota limits. Security CPU resource is the focus in this MIB.
jnxLsysSpCPUObjects	1.3.6.1.4.1.2636.3.39.1.17.18.1.1
jnxLsysSpCPUTable	1.3.6.1.4.1.2636.3.39.1.17.18.1.1.1		not-accessible	LSYSPROFILE CPU objects for CPU resource consumption per LSYS.
jnxLsysSpCPUEntry	1.3.6.1.4.1.2636.3.39.1.17.18.1.1.1.1		not-accessible	An entry in CPU resource table.
STR jnxLsysSpCPULsysName	1.3.6.1.4.1.2636.3.39.1.17.18.1.1.1.1.1	DisplayString	not-accessible	The name of the logical system for which CPU resource information is retrieved.
STR jnxLsysSpCPUProfileName	1.3.6.1.4.1.2636.3.39.1.17.18.1.1.1.1.2	DisplayString	read-only	The security profile name string for the LSYS.
U32 jnxLsysSpCPUsage	1.3.6.1.4.1.2636.3.39.1.17.18.1.1.1.1.3	Unsigned32	read-only	The current CP resource usage count for the LSYS.
U32 jnxLsysSpSPUUsage	1.3.6.1.4.1.2636.3.39.1.17.18.1.1.1.1.4	Unsigned32	read-only	The current SPU resource usage count for the LSYS.
U32 jnxLsysSpCPUReserved	1.3.6.1.4.1.2636.3.39.1.17.18.1.1.1.1.5	Unsigned32	read-only	The reserved resource count for the LSYS.
U32 jnxLsysSpCPUMaximum	1.3.6.1.4.1.2636.3.39.1.17.18.1.1.1.1.6	Unsigned32	read-only	The maximum allowed resource usage count for the LSYS.
jnxLsysSpCPUSummary	1.3.6.1.4.1.2636.3.39.1.17.18.1.2
jnxLsysSpCPSummary	1.3.6.1.4.1.2636.3.39.1.17.18.1.2.1
U32 jnxLsysSpCPUsedAmount	1.3.6.1.4.1.2636.3.39.1.17.18.1.2.1.1	Unsigned32	read-only	The CP resource consumption over all LSYS.
U32 jnxLsysSpCPMaxQuota	1.3.6.1.4.1.2636.3.39.1.17.18.1.2.1.2	Unsigned32	read-only	The CP resource maximum quota for the whole device for all LSYS.
U32 jnxLsysSpCPAvailableAmount	1.3.6.1.4.1.2636.3.39.1.17.18.1.2.1.3	Unsigned32	read-only	The CP resource available in the whole device.
U32 jnxLsysSpCPHeaviestUsage	1.3.6.1.4.1.2636.3.39.1.17.18.1.2.1.4	Unsigned32	read-only	The most amount of CP resource consumed of a LSYS.
STR jnxLsysSpCPHeaviestUser	1.3.6.1.4.1.2636.3.39.1.17.18.1.2.1.5	DisplayString	read-only	The LSYS name that consume the most CP resource.
U32 jnxLsysSpCPLightestUsage	1.3.6.1.4.1.2636.3.39.1.17.18.1.2.1.6	Unsigned32	read-only	The least amount of CP resource consumed of a LSYS.
STR jnxLsysSpCPLightestUser	1.3.6.1.4.1.2636.3.39.1.17.18.1.2.1.7	DisplayString	read-only	The LSYS name that consume the least CP resource.
jnxLsysSpSPUSummary	1.3.6.1.4.1.2636.3.39.1.17.18.1.2.2
U32 jnxLsysSpSPUUsedAmount	1.3.6.1.4.1.2636.3.39.1.17.18.1.2.2.1	Unsigned32	read-only	The SPU resource consumption over all LSYS.
U32 jnxLsysSpSPUMaxQuota	1.3.6.1.4.1.2636.3.39.1.17.18.1.2.2.2	Unsigned32	read-only	The SPU resource maximum quota for the whole device for all LSYS.
U32 jnxLsysSpSPUAvailableAmount	1.3.6.1.4.1.2636.3.39.1.17.18.1.2.2.3	Unsigned32	read-only	The SPU resource available in the whole device.
U32 jnxLsysSpSPUHeaviestUsage	1.3.6.1.4.1.2636.3.39.1.17.18.1.2.2.4	Unsigned32	read-only	The most amount of SPU resource consumed of a LSYS.
STR jnxLsysSpSPUHeaviestUser	1.3.6.1.4.1.2636.3.39.1.17.18.1.2.2.5	DisplayString	read-only	The LSYS name that consume the most SPU resource.
U32 jnxLsysSpSPULightestUsage	1.3.6.1.4.1.2636.3.39.1.17.18.1.2.2.6	Unsigned32	read-only	The least amount of SPU resource consumed of a LSYS.
STR jnxLsysSpSPULightestUser	1.3.6.1.4.1.2636.3.39.1.17.18.1.2.2.7	DisplayString	read-only	The LSYS name that consume the least SPU resource.

RFC description

Juniper Logical Systems (LSYS) CPU performance MIB. Monitors CPU utilization, scheduling, and performance metrics per logical system instance on Juniper devices.

Start monitoring Juniper SRX security device (logical-system CPU quota) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download JUNIPER-LSYSSP-CPU-MIB

What Is JUNIPER-LSYSSP-CPU-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description