Juniper-POLICY-MIB

All MIBs › Juniper-POLICY-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2005-08-08

Category: Vendor: Juniper

Description: MIB from Juniper Networks for managing routing policy filters along with their match conditions and actions on E-series routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Juniper-POLICY-MIB?

Juniper-POLICY-MIB manages routing/traffic policy filters, match conditions, and actions on Juniper E-series routers, including classifier control lists and rate-limit control lists used for QoS and route filtering. It exposes a policy table with administrative and operational state, error codes, reference counts, and rule indexing used to build and apply named policies. Its monitoring value is software/configuration-state oriented: juniPolicyOperStatus and juniPolicyErrorValue reveal whether a policy is actually active and functioning as configured, while juniPolicyReferenceCount shows how widely a policy is applied, which matters when diagnosing unexpected traffic filtering or rate-limiting behavior. It is a self-contained Juniper enterprise MIB that other Juniper subscriber and interface MIBs reference by policy name/ID. It is used on Juniper E-series routers applying routing policies, classifiers, or rate limits to subscriber or core traffic. Engineers can download the Juniper-POLICY-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-POLICY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper E-series router

Monitoring Examples

An operator checks juniPolicyTable/juniPolicyEntry for a given juniPolicyId to compare juniPolicyAdminState against juniPolicyOperStatus, and inspects juniPolicyErrorValue when a policy fails to activate as expected. A high juniPolicyReferenceCount indicates the policy is heavily reused across interfaces or subscribers, so an error there would have broad impact. Reviewing juniClassifierControlList and juniRateLimitControlList alongside juniPolicyAtmCellModeEnable helps confirm whether traffic classification and rate limiting are behaving as intended on ATM-based interfaces.

What Can Be Monitored

policy admin/operational state
policy activation error codes
policy reference/usage count
classifier control list assignment
rate-limit control list assignment

Imported Objects

From IF-MIB

InterfaceIndex

From Juniper-MIBs

juniMibs

MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using juniPolicyReferenceCount OID:

Select a Juniper E-series router (routing/traffic policy filters, QoS classifiers) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type juniPolicyReferenceCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Reflects the number of times this policy has been applied within the chassis. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
juniPolicyMIB	1.3.6.1.4.1.4874.2.2.27			The Policy MIB for the Juniper Networks enterprise.
juniPolicyObjects	1.3.6.1.4.1.4874.2.2.27.1
juniClassifierControlList	1.3.6.1.4.1.4874.2.2.27.1.1
I32 juniClassifierControlListNextIndex	1.3.6.1.4.1.4874.2.2.27.1.1.1	Integer32	read-only	This scalar object returns the index of the next available row in the juniClassifierControlListTable. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.
juniClassifierControlListTable	1.3.6.1.4.1.4874.2.2.27.1.1.2		not-accessible	This table contains entries for elements of classifier control lists. The details pertinent to each CLACL are found in the juniClassifierControlDefTable.
juniClassifierControlListEntry	1.3.6.1.4.1.4874.2.2.27.1.1.2.1		not-accessible	Each entry describes the characteristics of an IP access list element.
I32 juniClassifierControlListId	1.3.6.1.4.1.4874.2.2.27.1.1.2.1.1	Integer32	not-accessible	The number of the classifier control list to which this entry belongs.
ROW juniClassifierControlListRowStatus	1.3.6.1.4.1.4874.2.2.27.1.1.2.1.3	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy. To create an entry in this table, the following entry objects MUST be explicitly configured: juniClassifierControlListRowStatus juniClassifierControlListElemId
STR juniClassifierControlListName	1.3.6.1.4.1.4874.2.2.27.1.1.2.1.4	DisplayString	read-create	The name of the CLACL being defined.
C32 juniClassifierControlListReferenceCount	1.3.6.1.4.1.4874.2.2.27.1.1.2.1.5	Counter32	read-only	Number of times this CLACL is referenced by policies.
I32 juniClassifierControlListNextElementIndex	1.3.6.1.4.1.4874.2.2.27.1.1.2.1.6	Integer32	read-only	Each get of this object will return a unique index which may be used to create classifier control list elements. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.
juniClassifierControlListElementTable	1.3.6.1.4.1.4874.2.2.27.1.1.4		not-accessible	This table contains entries for elements of classifier control lists. Entries belonging to the same control list are ordered, and comparisons to those entries are performed in that order until a match is detected. If no match is found, the default action is to 'deny'.
juniClassifierControlListElementEntry	1.3.6.1.4.1.4874.2.2.27.1.1.4.1		not-accessible	Each entry describes the characteristics of an IP access list element.
I32 juniClassifierControlListElemId	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.1	Integer32	not-accessible	The relative position of this entry within its classifier control list. Classifier control list entries are searched in this sequence (low to high values) until a match is found.
ROW juniClassifierControlListElemRowStatus	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.2	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. This table provides a partial implementation for rowStatus. Rows may be created using createAndGo and createAndWait. Once a row has been made active the row status may not be changed.
T/F juniClassifierControlListNotSrc	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.3	TruthValue	read-create	Invert the meaning of the source IP address and mask objects. For example 'not 10.10.0.90/255.255.255.255 (host address)' would result in all source addresses except for host 10.19.9.90 being matched.
IP juniClassifierControlListSrc	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.4	IpAddress	read-create	A source IP address. A subject IP address is first masked with the value of juniClassifierControlListSrcMask, then the result is compared to this value. Setting both this object and its corresponding mask to 0.0.0.0 acts as a wildcard, matching any source IP address.
IP juniClassifierControlListSrcMask	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.5	IpAddress	read-create	The IP address mask to be applied to a subject source IP address before comparing it to juniClassifierControlListSrc. Ones in the mask identify which bits in the subject IP address are significant for the comparison. To be considered valid, a nonzero value for this object must contain a single contiguous string of ones, beginning with the most significant bit of the mask.
T/F juniClassifierControlListNotDst	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.6	TruthValue	read-create	Invert the meaning of the destination IP address and mask objects. For example, 'not 10.10.0.90/255.255.255.255 (host address)' would result in all source addresses except for host 10.19.9.90 being matched.
IP juniClassifierControlListDst	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.7	IpAddress	read-create	A destination IP address. A subject IP address is first masked with the value of juniClassifierControlListDstMask, then the result is compared to this value. Setting both this object and its corresponding mask to 0.0.0.0 acts as a wildcard, matching any destination IP address.
IP juniClassifierControlListDstMask	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.8	IpAddress	read-create	The IP address mask to be applied to a subject destination IP address before comparing it to juniClassifierControlListDst. Ones in the mask identify which bits in the IP address are significant for the comparison. To be considered valid, a nonzero value for this object must contain a single contiguous string of ones, beginning with the most significant bit of the mask.
T/F juniClassifierControlListNotProtocol	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.9	TruthValue	read-create	Invert the meaning of the protocol object. For example, 'not TCP' matches any protocol except for TCP.
I32 juniClassifierControlListProtocol	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.10	Integer32	read-create	An IP Protocol value. Nonzero values match a specific IP Protocol value (e.g. 6 for TCP) carried in an IP packet; a value of zero acts as a wildcard, matching any IP Protocol.
I32 juniClassifierControlListTosByte	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.11	Integer32	read-create	The IP TOS byte value to match.
I32 juniClassifierControlListMask	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.12	Integer32	read-create	The mask to use for TOS byte checks. Allowed values are 0, 224, 252, 255.
JUN juniClassifierControlListSrcOperator	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.13	JuniClaclPortOperator	read-create	Operator for use in comparing source ports.
I32 juniClassifierControlListSrcFromPort	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.14	Integer32	read-create	Source UDP or TCP 'from' port number.
I32 juniClassifierControlListSrcToPort	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.15	Integer32	read-create	Source UDP or TCP 'to' port number.
JUN juniClassifierControlListDestOperator	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.16	JuniClaclPortOperator	read-create	Operator for use in comparing Destination ports.
I32 juniClassifierControlListDestFromPort	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.17	Integer32	read-create	Destination UDP or TCP 'from' port number.
I32 juniClassifierControlListDestToPort	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.18	Integer32	read-create	Destination UDP or TCP 'to' port number.
I32 juniClassifierControlListICMPType	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.19	Integer32	read-create	Optional ICMP message type for classification.
I32 juniClassifierControlListICMPCode	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.20	Integer32	read-create	Optional ICMP message code for classification.
I32 juniClassifierControlListIGMPType	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.21	Integer32	read-create	Optional IGMP message type for classification.
I32 juniClassifierControlListTcpFlagsValue	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.22	Integer32	read-create	Optional TCP flags value for classification.
I32 juniClassifierControlListTcpFlagsMask	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.23	Integer32	read-create	Optional TCP flags mask for classification. TCP flag bits not specified in the mask are don't care bits.
I32 juniClassifierControlListIpFlagsValue	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.24	Integer32	read-create	Optional IP flags value for classification.
I32 juniClassifierControlListIpFlagsMask	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.25	Integer32	read-create	Optional IP flags mask for classification. IP flag bits not specified in the mask are don't care bits
JUN juniClassifierControlListIpFragValue	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.26	JuniPolicyIpFragValue	read-create	Optional IP flags mask for classification. IP flag bits not specified in the mask are don't care bits
T/F juniClassifierControlListLocal	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.27	TruthValue	read-create	Match IP packets that are locally destined, i.e., destined to any one of router's interfaces.
T/F juniClassifierControlListLocalPresent	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.28	TruthValue	read-create	Set to true if local classification field is configured.
I32 juniClassifierControlListSaRouteClass	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.29	Integer32	read-create	Match packets with source address route class matching this route class. The route class value of a packet can be determined in the secondary input policy attachment stage only. The route class value of a packet is assigned the value 0 in the input and output policy attachment stages.
T/F juniClassifierControlListSaRouteClassPresent	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.30	TruthValue	read-create	Set to true if SA route class classification field is configured.
I32 juniClassifierControlListDaRouteClass	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.31	Integer32	read-create	Match packets with destination address route class matching this route class. The route class value of a packet can be determined in the secondary input policy attachment stage only. The route class value of a packet is assigned the value 0 in the input and output policy attachment stages.
T/F juniClassifierControlListDaRouteClassPresent	1.3.6.1.4.1.4874.2.2.27.1.1.4.1.32	TruthValue	read-create	Set to true if DA route class classification field is configured.
juniRateLimitControlList	1.3.6.1.4.1.4874.2.2.27.1.2
I32 juniRateLimitProfileNextIndex	1.3.6.1.4.1.4874.2.2.27.1.2.1	Integer32	read-only	This scalar object returns the index of the next available row in the juniRateLimitProfileTable. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.
juniRateLimitProfileTable	1.3.6.1.4.1.4874.2.2.27.1.2.2		not-accessible	This table contains entries for elements of Rate Limit Profile (RLP) definitions.
juniRateLimitProfileEntry	1.3.6.1.4.1.4874.2.2.27.1.2.2.1		not-accessible	Each entry describes the characteristics of a rate limit profile element.
I32 juniRateLimitProfileId	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.1	Integer32	not-accessible	The ID number of the rate limit profile (RLP) entry which is defined by this row.
ROW juniRateLimitProfileRowStatus	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.2	RowStatus	read-write	Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniRateLimitProfileName. The rowStatus must be set to notInService in order to modify an entry in this table. After making the desired changes you should set the rowStatus to active to apply the changes.
STR juniRateLimitProfileName	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.3	DisplayString	read-write	Specifies the name of the rate limit profile defined by this row.
C32 juniRateLimitReferenceCount	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.4	Counter32	read-only	This object reflects the number of times a rate limit profile object is referenced by policies.
U32 juniRateLimitCommittedBps	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.5	Unsigned32	read-write	The committed access rate in bits per second.
U32 juniRateLimitCommittedBurst	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.6	Unsigned32	read-write	The committed access rate burst value in bytes.
U32 juniRateLimitExceedBps	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.7	Unsigned32	read-write	The peak access rate in bits per second. To be configured only if rate limit profile type is two-rate.
U32 juniRateLimitExceedBurst	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.8	Unsigned32	read-write	The peak access rate burst value in bytes. To be configured only if rate limit profile type is two-rate.
INT juniRateLimitCommittedAction	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.9	INTEGER	read-write	Action to be taken when the access rate is within the bounds of the committed access rate.
INT juniRateLimitConformedAction	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.10	INTEGER	read-write	Action to be taken when the access rate exceeds the bounds of the committed access rate.
INT juniRateLimitExceededAction	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.11	INTEGER	read-write	Action to be taken when the access rate exceeds the bounds of the peak access rate.
I32 juniRateLimitCommittedMarkVal	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.12	Integer32	read-write	New IP precedence to be used when the juniRateLimitCommittedAction mark action is applied.
I32 juniRateLimitConformedMarkVal	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.13	Integer32	read-write	New IP prececence to be used when the juniRateLimitExceedCommittedAction mark action is applied.
I32 juniRateLimitExceededMarkVal	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.14	Integer32	read-write	New IP precedence to be used when the juniRateLimitExceedPeakAction mark action is applied.
U32 juniRateLimitMask	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.15	Unsigned32	read-write	Mask to be applied when executing a mark action.
JUN juniRateLimitProfileType	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.16	JuniRateLimitProfileType	read-write	The rate limit profile type (i.e. one-rate or two-rate). Defaults to two-rate, if not specified.
U32 juniRateLimitExcessBurst	1.3.6.1.4.1.4874.2.2.27.1.2.2.1.17	Unsigned32	read-write	The excess committed access rate burst value in bytes. To be configured only if rate limit profile type is one-rate.
juniPolicy	1.3.6.1.4.1.4874.2.2.27.1.3
I32 juniPolicyNextIndex	1.3.6.1.4.1.4874.2.2.27.1.3.1	Integer32	read-only	This scalar object returns the index of the next available row in the juniPolicyTable. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.
juniPolicyTable	1.3.6.1.4.1.4874.2.2.27.1.3.2		not-accessible	This table contains entries which represent the non-repetive fields of a policy definition.
juniPolicyEntry	1.3.6.1.4.1.4874.2.2.27.1.3.2.1		not-accessible	Each entry contains the non-repetitive fields of a policy definition.
I32 juniPolicyId	1.3.6.1.4.1.4874.2.2.27.1.3.2.1.1	Integer32	not-accessible	The number of the policy table entry which is defined by this row.
ROW juniPolicyRowStatus	1.3.6.1.4.1.4874.2.2.27.1.3.2.1.2	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy * LIMITED ACCESS LIST CONFIGURATION LEVEL * RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list, i.e. create a policy table entry with the associated policy name. destroy Destroy the specified list and all of its constituent elements. Policy row members may not be modified once the row has been created.
INT juniPolicyAdminState	1.3.6.1.4.1.4874.2.2.27.1.3.2.1.3	INTEGER	read-create	This object is used to control the administrative state of a policy. Enabling a policy will result in the rules which make up a policy being applied to interfaces to which the policy is assigned. You should disable the admin state before adding/modifying any rules or classifier groups in this policy and then re-enable to apply the changes. This object may be modified while the row is active.
INT juniPolicyOperStatus	1.3.6.1.4.1.4874.2.2.27.1.3.2.1.4	INTEGER	read-only	This obsolete object was used to retrieve the operational state of a policy. If a policy is disabled, it is not applied to any interfaces within the system. If a policy is invalid, there is a problem with the policy preventing it from being applied to an interface. An error code providing diagnostic information about the problem is found in juniPolicyErrorValue. If a policy is enabled, it has been applied to one or more interfaces within the system. This object was made obsolete due to some changes in E-Series which eliminated the possibility of a policy being operationaly disabled.
I32 juniPolicyErrorValue	1.3.6.1.4.1.4874.2.2.27.1.3.2.1.5	Integer32	read-only	An error code providing diagnostic information for invalid policies. The enumeration of this field is TBD. A zero (0) value indicates that there is no error reported. This object was made obsolete due to some changes in E-Series which eliminated the possibility of a policy being operationaly disabled.
STR juniPolicyName	1.3.6.1.4.1.4874.2.2.27.1.3.2.1.6	DisplayString	read-create	Specifies the name of the policy defined by this row.
C32 juniPolicyReferenceCountEx	1.3.6.1.4.1.4874.2.2.27.1.3.2.1.7	Counter32	read-only	Reflects the number of times this policy has been applied within the chassis.
I32 juniPolicyRuleNextIndex	1.3.6.1.4.1.4874.2.2.27.1.3.2.1.8	Integer32	read-only	Read only variable which provides the next available PolicyRuleIndex with respect to the policy defined by this row. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.
T/F juniPolicyAtmCellModeEnable	1.3.6.1.4.1.4874.2.2.27.1.3.2.1.9	TruthValue	read-create	Specifies whether the policy is in ATM Cell Mode.
juniPolicyRuleTable	1.3.6.1.4.1.4874.2.2.27.1.3.3		not-accessible	Each entry within this table defines a rule component of a policy. The entries in this table are created automatically when entries are created in specific rule tables. This table is read only. This object is deprecated due to new policy rule table key.
juniPolicyRuleEntry	1.3.6.1.4.1.4874.2.2.27.1.3.3.1		not-accessible	Each entry defines a single rule component. This object is deprecated due to new policy rule table key.
I32 juniPolicyRulePolicyId	1.3.6.1.4.1.4874.2.2.27.1.3.3.1.1	Integer32	not-accessible	The PolicyTable index of the policy which owns this rule. This object is deprecated due to new policy rule table key.
I32 juniPolicyRulePrec	1.3.6.1.4.1.4874.2.2.27.1.3.3.1.2	Integer32	not-accessible	The precedence of this rule within this group of policy rules. This object is deprecated due to new policy rule table key.
I32 juniPolicyRuleId	1.3.6.1.4.1.4874.2.2.27.1.3.3.1.3	Integer32	not-accessible	The index of this rule within the set of rules owned by the policy defined by juniPolicyRulePolicyId. This object is deprecated due to new policy rule table key.
INT juniPolicyRuleType	1.3.6.1.4.1.4874.2.2.27.1.3.3.1.4	INTEGER	read-only	This field specifies the type of rule being defined. The remaining information which makes up this rule is found in the specific rule table defined by juniPolicyRuleType. The specific rule tables are indexed by juniPolicyRulePolicyId.juniPolicyRuleId. This object is deprecated due to new policy rule table key.
T/F juniPolicySuspend	1.3.6.1.4.1.4874.2.2.27.1.3.3.1.5	TruthValue	read-write	Setting this object to true results in the rule being suspended (taken out of service). Setting this value to false results in the rule being returned to service. This object is deprecated due to new policy rule table key.
T/F juniPolicyEclipsed	1.3.6.1.4.1.4874.2.2.27.1.3.3.1.6	TruthValue	read-only	This value is true if the policy rule is eclipsed. A policy rule is eclipsed if a conflicting rule with the same classifier control list precedes the rule, and the preceding rule is not suspended. A false value indicates that the rule is not eclipsed. This object is deprecated due to new policy rule table key.
juniNextHopRuleTable	1.3.6.1.4.1.4874.2.2.27.1.3.4		not-accessible	A list of entries which provide next-hop rule data. Rows created in this table result in an entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
juniNextHopRuleEntry	1.3.6.1.4.1.4874.2.2.27.1.3.4.1		not-accessible	A next-hop rule entry. This object is deprecated due to new policy rule table key.
ROW juniNextHopRowStatus	1.3.6.1.4.1.4874.2.2.27.1.3.4.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. The next-hop IP address is mandatory and must be specified. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
IP juniNextHopIpAddress	1.3.6.1.4.1.4874.2.2.27.1.3.4.1.2	IpAddress	read-create	The IP address to forward all packets to. This object is deprecated due to new policy rule table key.
I32 juniNextHopClaclId	1.3.6.1.4.1.4874.2.2.27.1.3.4.1.3	Integer32	read-create	The classifier control list ID which completes the NextHop policy rule. This object is deprecated due to new policy rule table key.
juniFilterRuleTable	1.3.6.1.4.1.4874.2.2.27.1.3.5		not-accessible	A list of entries which provide filter rule data. Creation of an entry in this table results in a corresponding entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
juniFilterRuleEntry	1.3.6.1.4.1.4874.2.2.27.1.3.5.1		not-accessible	A filter rule entry. This object is deprecated due to new policy rule table key.
ROW juniFilterRowStatus	1.3.6.1.4.1.4874.2.2.27.1.3.5.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
I32 juniFilterClaclId	1.3.6.1.4.1.4874.2.2.27.1.3.5.1.2	Integer32	read-create	The classifier control list ID which completes the filter policy rule. This object is deprecated due to new policy rule table key.
juniNextInterfaceRuleTable	1.3.6.1.4.1.4874.2.2.27.1.3.6		not-accessible	A list of entries which provide NextInterface rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
juniNextInterfaceRuleEntry	1.3.6.1.4.1.4874.2.2.27.1.3.6.1		not-accessible	A NextInterface rule entry. This object is deprecated due to new policy rule table key.
ROW juniNextInterfaceRowStatus	1.3.6.1.4.1.4874.2.2.27.1.3.6.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. The next-interface parameter is mandatory and must be specified. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
NUM juniNextInterfaceId	1.3.6.1.4.1.4874.2.2.27.1.3.6.1.2	InterfaceIndex	read-create	The interface index to which traffic matching the CLACL ID will be routed. This object is deprecated due to new policy rule table key.
I32 juniNextInterfaceClaclId	1.3.6.1.4.1.4874.2.2.27.1.3.6.1.3	Integer32	read-create	The classifier control list ID which completes the NextInterface policy rule. This object is deprecated due to new policy rule table key.
IP juniNextInterfaceNextHop	1.3.6.1.4.1.4874.2.2.27.1.3.6.1.4	IpAddress	read-create	The IP address to forward all packets to. This object is deprecated due to new policy rule table key.
juniRateLimitRuleTable	1.3.6.1.4.1.4874.2.2.27.1.3.7		not-accessible	A list of entries which provide RateLimit rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
juniRateLimitRuleEntry	1.3.6.1.4.1.4874.2.2.27.1.3.7.1		not-accessible	A RateLimit rule entry. This object is deprecated due to new policy rule table key.
ROW juniRateLimitRowStatus	1.3.6.1.4.1.4874.2.2.27.1.3.7.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. The rate limit profile ID is mandatory and must be specified. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
I32 juniRateLimitId	1.3.6.1.4.1.4874.2.2.27.1.3.7.1.2	Integer32	read-create	The RLP ID which provides the rate limit data which completes the RateLimit policy rule. This object is deprecated due to new policy rule table key.
I32 juniRateLimitClaclId	1.3.6.1.4.1.4874.2.2.27.1.3.7.1.3	Integer32	read-create	The classifier control list ID which fills out the RateLimit policy rule. This object is deprecated due to new policy rule table key.
juniMarkingRuleTable	1.3.6.1.4.1.4874.2.2.27.1.3.8		not-accessible	A list of entries which provide Marking rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
juniMarkingRuleEntry	1.3.6.1.4.1.4874.2.2.27.1.3.8.1		not-accessible	A Marking rule entry. This object is deprecated due to new policy rule table key.
ROW juniMarkingRowStatus	1.3.6.1.4.1.4874.2.2.27.1.3.8.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. The IP precedence field is mandatory and must be specified. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
I32 juniMarkingTOSByte	1.3.6.1.4.1.4874.2.2.27.1.3.8.1.2	Integer32	read-create	The IP precedence value associated with this policy rule. This object is deprecated due to new policy rule table key.
I32 juniMarkingMask	1.3.6.1.4.1.4874.2.2.27.1.3.8.1.3	Integer32	read-create	The mask to use for TOS byte checks. This object is deprecated due to new policy rule table key.
I32 juniMarkingClaclId	1.3.6.1.4.1.4874.2.2.27.1.3.8.1.4	Integer32	read-create	The classifier control list ID which fills out the Marking policy rule. This object is deprecated due to new policy rule table key.
juniForwardRuleTable	1.3.6.1.4.1.4874.2.2.27.1.3.9		not-accessible	A list of entries which provide forward rule data. Creation of an entry in this table results in a corresponding entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
juniForwardRuleEntry	1.3.6.1.4.1.4874.2.2.27.1.3.9.1		not-accessible	A forward rule entry. This object is deprecated due to new policy rule table key.
ROW juniForwardRowStatus	1.3.6.1.4.1.4874.2.2.27.1.3.9.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
I32 juniForwardClaclId	1.3.6.1.4.1.4874.2.2.27.1.3.9.1.2	Integer32	read-create	The classifier control list ID which completes the forward policy rule. This object is deprecated due to new policy rule table key.
NUM juniForwardNextInterfaceId	1.3.6.1.4.1.4874.2.2.27.1.3.9.1.3	InterfaceIndex	read-create	The interface index to which traffic matching the CLACL ID will be routed. This object is deprecated due to new policy rule table key.
IP juniForwardNextHop	1.3.6.1.4.1.4874.2.2.27.1.3.9.1.4	IpAddress	read-create	The IP address to which all packets are forwarded. This object is deprecated due to new policy rule table key.
I32 juniForwardRouterId	1.3.6.1.4.1.4874.2.2.27.1.3.9.1.5	Integer32	read-only	The index or ID of the router. This object is deprecated due to new policy rule table key.
I32 juniForwardOrder	1.3.6.1.4.1.4874.2.2.27.1.3.9.1.6	Integer32	read-create	The order of the forward rules for a given classifier within a policy. The forward rules will be ordered from the lowest order value to the highest. This object is deprecated due to new policy rule table key.
T/F juniForwardIgnoreDefaultRoute	1.3.6.1.4.1.4874.2.2.27.1.3.9.1.7	TruthValue	read-create	Setting this object to true results in the default route being ignored when determining if a next hop address is reachable. This object is deprecated due to new policy rule table key.
juniTrafficShapeRuleTable	1.3.6.1.4.1.4874.2.2.27.1.3.10		not-accessible	Obsolete list of entries which provide Traffic Shape rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. This list became obsolete when the policy shaper capability was moved into the quality of service component.
juniTrafficShapeRuleEntry	1.3.6.1.4.1.4874.2.2.27.1.3.10.1		not-accessible	A TrafficShape rule entry.
ROW juniTrafficShapeRowStatus	1.3.6.1.4.1.4874.2.2.27.1.3.10.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. The traffic shape profile ID is mandatory and must be specified. Modes supported are create-and-go and destroy.
I32 juniTrafficShapeId	1.3.6.1.4.1.4874.2.2.27.1.3.10.1.2	Integer32	read-create	The RLP ID which provides the rate limit data which completes the traffic shape policy rule.
juniColorRuleTable	1.3.6.1.4.1.4874.2.2.27.1.3.11		not-accessible	A list of entries which provide Color rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
juniColorRuleEntry	1.3.6.1.4.1.4874.2.2.27.1.3.11.1		not-accessible	A Color rule entry. This object is deprecated due to new policy rule table key.
ROW juniColorRowStatus	1.3.6.1.4.1.4874.2.2.27.1.3.11.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. The color field is mandatory and must be specified. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
INT juniColor	1.3.6.1.4.1.4874.2.2.27.1.3.11.1.2	INTEGER	read-create	The color with which to explicitly color packets associated with this policy rule. This object is deprecated due to new policy rule table key.
I32 juniColorClaclId	1.3.6.1.4.1.4874.2.2.27.1.3.11.1.3	Integer32	read-create	The classifier control list ID which fills out the Color policy rule. This object is deprecated due to new policy rule table key.
juniLogRuleTable	1.3.6.1.4.1.4874.2.2.27.1.3.12		not-accessible	A list of entries which provide log rule data. Creation of an entry in this table results in a corresponding entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
juniLogRuleEntry	1.3.6.1.4.1.4874.2.2.27.1.3.12.1		not-accessible	A log rule entry. This object is deprecated due to new policy rule table key.
ROW juniLogRowStatus	1.3.6.1.4.1.4874.2.2.27.1.3.12.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
I32 juniLogClaclId	1.3.6.1.4.1.4874.2.2.27.1.3.12.1.2	Integer32	read-create	The classifier control list ID which completes the log policy rule. This object is deprecated due to new policy rule table key.
juniTrafficClassRuleTable	1.3.6.1.4.1.4874.2.2.27.1.3.13		not-accessible	A list of entries which provide traffic Class rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
juniTrafficClassRuleEntry	1.3.6.1.4.1.4874.2.2.27.1.3.13.1		not-accessible	A Traffic Class rule entry. This object is deprecated due to new policy rule table key.
ROW juniTrafficClassRowStatus	1.3.6.1.4.1.4874.2.2.27.1.3.13.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. The juniTrafficClassId field is mandatory and must be specified. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
I32 juniTrafficClassId	1.3.6.1.4.1.4874.2.2.27.1.3.13.1.2	Integer32	read-create	The traffic class ID. This object is deprecated due to new policy rule table key.
I32 juniTrafficClassClaclId	1.3.6.1.4.1.4874.2.2.27.1.3.13.1.3	Integer32	read-create	The classifier control list ID which fills out the traffic class policy rule. This object is deprecated due to new policy rule table key.
juniPolicyRule2Table	1.3.6.1.4.1.4874.2.2.27.1.3.14		not-accessible	Each entry within this table defines a rule component of a policy. The entries in this table are created automatically when entries are created in specific rule tables. This table is read only.
juniPolicyRule2Entry	1.3.6.1.4.1.4874.2.2.27.1.3.14.1		not-accessible	Each entry defines a single rule component.
I32 juniPolicyRulePolicyId2	1.3.6.1.4.1.4874.2.2.27.1.3.14.1.1	Integer32	not-accessible	The PolicyTable index of the policy which owns this rule.
I32 juniPolicyRuleClaclId	1.3.6.1.4.1.4874.2.2.27.1.3.14.1.2	Integer32	not-accessible	The classifier index from the ClassifierControlListTable that this rule references.
I32 juniPolicyRuleId2	1.3.6.1.4.1.4874.2.2.27.1.3.14.1.3	Integer32	not-accessible	The index of this rule within the set of rules owned by the policy defined by juniPolicyRulePolicyId2.
INT juniPolicyRuleType2	1.3.6.1.4.1.4874.2.2.27.1.3.14.1.4	INTEGER	read-only	This field specifies the type of rule being defined. The remaining information which makes up this rule is found in the specific rule table defined by juniPolicyRuleType. The specific rule tables are indexed by juniPolicyRulePolicyId2, juniPolicyRuleClaclId, juniPolicyRuleId2.
T/F juniPolicySuspend2	1.3.6.1.4.1.4874.2.2.27.1.3.14.1.5	TruthValue	read-write	Setting this object to true results in the rule being suspended (taken out of service). Setting this value to false results in the rule being returned to service.
juniNextHopRule2Table	1.3.6.1.4.1.4874.2.2.27.1.3.15		not-accessible	A list of entries which provide next-hop rule data. Rows created in this table result in an entry being created in the policy rule table.
juniNextHopRule2Entry	1.3.6.1.4.1.4874.2.2.27.1.3.15.1		not-accessible	A next-hop rule entry.
ROW juniNextHopRowStatus2	1.3.6.1.4.1.4874.2.2.27.1.3.15.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. The next-hop IP address is mandatory and must be specified. Modes supported are create-and-go and destroy.
IP juniNextHopIpAddress2	1.3.6.1.4.1.4874.2.2.27.1.3.15.1.2	IpAddress	read-create	The IP address to forward all packets to.
juniFilterRule2Table	1.3.6.1.4.1.4874.2.2.27.1.3.16		not-accessible	A list of entries which provide filter rule data. Creation of an entry in this table results in a corresponding entry being created in the policy rule table.
juniFilterRule2Entry	1.3.6.1.4.1.4874.2.2.27.1.3.16.1		not-accessible	A filter rule entry.
ROW juniFilterRowStatus2	1.3.6.1.4.1.4874.2.2.27.1.3.16.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy.
juniNextInterfaceRule2Table	1.3.6.1.4.1.4874.2.2.27.1.3.17		not-accessible	A list of entries which provide NextInterface rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table.
juniNextInterfaceRule2Entry	1.3.6.1.4.1.4874.2.2.27.1.3.17.1		not-accessible	A NextInterface rule entry.
ROW juniNextInterfaceRowStatus2	1.3.6.1.4.1.4874.2.2.27.1.3.17.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. The next-interface parameter is mandatory and must be specified. Modes supported are create-and-go and destroy.
NUM juniNextInterfaceId2	1.3.6.1.4.1.4874.2.2.27.1.3.17.1.2	InterfaceIndex	read-create	The interface index to which traffic matching the CLACL ID will be routed.
IP juniNextInterfaceNextHop2	1.3.6.1.4.1.4874.2.2.27.1.3.17.1.3	IpAddress	read-create	The IP address to forward all packets to.
juniRateLimitRule2Table	1.3.6.1.4.1.4874.2.2.27.1.3.18		not-accessible	A list of entries which provide RateLimit rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table.
juniRateLimitRule2Entry	1.3.6.1.4.1.4874.2.2.27.1.3.18.1		not-accessible	A RateLimit rule entry.
ROW juniRateLimitRowStatus2	1.3.6.1.4.1.4874.2.2.27.1.3.18.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. The rate limit profile ID is mandatory and must be specified. Modes supported are create-and-go and destroy.
I32 juniRateLimitId2	1.3.6.1.4.1.4874.2.2.27.1.3.18.1.2	Integer32	read-create	The RLP ID which provides the rate limit data which completes the RateLimit policy rule.
juniMarkingRule2Table	1.3.6.1.4.1.4874.2.2.27.1.3.19		not-accessible	A list of entries which provide Marking rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table.
juniMarkingRule2Entry	1.3.6.1.4.1.4874.2.2.27.1.3.19.1		not-accessible	A Marking rule entry.
ROW juniMarkingRowStatus2	1.3.6.1.4.1.4874.2.2.27.1.3.19.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. The IP precedence field is mandatory and must be specified. Modes supported are create-and-go and destroy.
I32 juniMarkingTOSByte2	1.3.6.1.4.1.4874.2.2.27.1.3.19.1.2	Integer32	read-create	The IP precedence value associated with this policy rule.
I32 juniMarkingMask2	1.3.6.1.4.1.4874.2.2.27.1.3.19.1.3	Integer32	read-create	The mask to use for TOS byte checks.
juniForwardRule2Table	1.3.6.1.4.1.4874.2.2.27.1.3.20		not-accessible	A list of entries which provide forward rule data. Creation of an entry in this table results in a corresponding entry being created in the policy rule table.
juniForwardRule2Entry	1.3.6.1.4.1.4874.2.2.27.1.3.20.1		not-accessible	A forward rule entry.
ROW juniForwardRowStatus2	1.3.6.1.4.1.4874.2.2.27.1.3.20.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy.
NUM juniForwardNextInterfaceId2	1.3.6.1.4.1.4874.2.2.27.1.3.20.1.2	InterfaceIndex	read-create	The interface index to which traffic matching the CLACL ID will be routed.
IP juniForwardNextHop2	1.3.6.1.4.1.4874.2.2.27.1.3.20.1.3	IpAddress	read-create	The IP address to which all packets are forwarded.
I32 juniForwardRouterId2	1.3.6.1.4.1.4874.2.2.27.1.3.20.1.4	Integer32	read-only	The index or ID of the router.
I32 juniForwardOrder2	1.3.6.1.4.1.4874.2.2.27.1.3.20.1.5	Integer32	read-create	The order of the forward rules for a given classifier within a policy. The forward rules will be ordered from the lowest order value to the highest.
T/F juniForwardIgnoreDefaultRoute2	1.3.6.1.4.1.4874.2.2.27.1.3.20.1.6	TruthValue	read-create	Setting this object to true results in the default route being ignored when determining if a next hop address is reachable.
juniColorRule2Table	1.3.6.1.4.1.4874.2.2.27.1.3.21		not-accessible	A list of entries which provide Color rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table.
juniColorRule2Entry	1.3.6.1.4.1.4874.2.2.27.1.3.21.1		not-accessible	A Color rule entry.
ROW juniColorRowStatus2	1.3.6.1.4.1.4874.2.2.27.1.3.21.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. The color field is mandatory and must be specified. Modes supported are create-and-go and destroy.
INT juniColor2	1.3.6.1.4.1.4874.2.2.27.1.3.21.1.2	INTEGER	read-create	The color with which to explicitly color packets associated with this policy rule.
juniLogRule2Table	1.3.6.1.4.1.4874.2.2.27.1.3.22		not-accessible	A list of entries which provide log rule data. Creation of an entry in this table results in a corresponding entry being created in the policy rule table.
juniLogRule2Entry	1.3.6.1.4.1.4874.2.2.27.1.3.22.1		not-accessible	A log rule entry.
ROW juniLogRowStatus2	1.3.6.1.4.1.4874.2.2.27.1.3.22.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy.
juniTrafficClassRule2Table	1.3.6.1.4.1.4874.2.2.27.1.3.23		not-accessible	A list of entries which provide traffic Class rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table.
juniTrafficClassRule2Entry	1.3.6.1.4.1.4874.2.2.27.1.3.23.1		not-accessible	A Traffic Class rule entry.
ROW juniTrafficClassRowStatus2	1.3.6.1.4.1.4874.2.2.27.1.3.23.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. The juniTrafficClassId2 field is mandatory and must be specified. Modes supported are create-and-go and destroy.
I32 juniTrafficClassId2	1.3.6.1.4.1.4874.2.2.27.1.3.23.1.2	Integer32	read-create	The traffic class ID.
juniPolicyClassifierGroupTable	1.3.6.1.4.1.4874.2.2.27.1.3.24		not-accessible	A list of entries that provide policy classifier group data. Creation of entries in this table result in a corresponding entry being created in the policy clacl group table.
juniPolicyClassifierGroupEntry	1.3.6.1.4.1.4874.2.2.27.1.3.24.1		not-accessible	A classifier group entry.
I32 juniPolicyClassifierGroupPolicyId	1.3.6.1.4.1.4874.2.2.27.1.3.24.1.1	Integer32	not-accessible	The PolicyTable index of the policy which owns this classifier group.
I32 juniPolicyClassifierGroupClaclId	1.3.6.1.4.1.4874.2.2.27.1.3.24.1.2	Integer32	not-accessible	The classifier index from the ClassifierControlListTable that this classifier group references.
ROW juniPolicyClassifierGroupRowStatus	1.3.6.1.4.1.4874.2.2.27.1.3.24.1.3	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy. Mode create-and-go will create a classifier group entry for the specified policy if the entry does not exist and will set the precedence value if provided. Mode destroy will delete all policy rules referencing this classifier within this policy and will delete the classifier group entry.
I32 juniPolicyClassifierGroupPrecedence	1.3.6.1.4.1.4874.2.2.27.1.3.24.1.4	Integer32	read-create	The precedence value for this classifier within this policy.
juniExceptionRuleTable	1.3.6.1.4.1.4874.2.2.27.1.3.25		not-accessible	A list of entries which provide Exception rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table.
juniExceptionRuleEntry	1.3.6.1.4.1.4874.2.2.27.1.3.25.1		not-accessible	An Exception rule entry.
ROW juniExceptionRowStatus	1.3.6.1.4.1.4874.2.2.27.1.3.25.1.1	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. The exception field is mandatory and must be specified. Modes supported are create-and-go and destroy.
INT juniExceptionApplication	1.3.6.1.4.1.4874.2.2.27.1.3.25.1.2	INTEGER	read-create	The application that will receive the packet exceptioned because of this policy action.
juniPolicyIf	1.3.6.1.4.1.4874.2.2.27.1.4
juniPolicyIfTable	1.3.6.1.4.1.4874.2.2.27.1.4.1		not-accessible	This obsolete table contains entries which represent attachment of policies to interfaces. This table became obsolete when the juniPolicyIfAttTable was added.
juniPolicyIfEntry	1.3.6.1.4.1.4874.2.2.27.1.4.1.1		not-accessible	Each entry contains the attachment of policy(s) to an interface.
U32 juniPolicyIfInterfaceId	1.3.6.1.4.1.4874.2.2.27.1.4.1.1.1	Unsigned32	not-accessible	The interface number representing the interface to which policy(s) have been attached.
ROW juniPolicyIfRowStatus	1.3.6.1.4.1.4874.2.2.27.1.4.1.1.2	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy * LIMITED ACCESS LIST CONFIGURATION LEVEL * RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list, i.e. create a policy table entry with the associated policy name. destroy Destroy the specified list and all of its constituent elements. Policy row members may not be modified once the row has been created.
I32 juniPolicyIfInputPolicyId	1.3.6.1.4.1.4874.2.2.27.1.4.1.1.3	Integer32	read-create	This object is used to control the attachment of input policies to the interface specified by juniPolicyIfInterfaceId, juniPolicyIfForwardingType and juniPolicyIfPolicyType. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. If so, the attachment is immediate.
I32 juniPolicyIfOutputPolicyId	1.3.6.1.4.1.4874.2.2.27.1.4.1.1.4	Integer32	read-create	This object is used to control the attachment of output policies to the interface specified by juniPolicyIfInterfaceId, juniPolicyIfForwardingType and juniPolicyIfPolicyType. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. If so, the attachment is immediate.
T/F juniPolicyIfInputStatsEnable	1.3.6.1.4.1.4874.2.2.27.1.4.1.1.5	TruthValue	read-create	This object is used to control the enabling and disabling of statistics for an input policy attachment. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The desired value must be set before the policy is attached or in a multiple object varbind. Failure to do so will result in the policy being attached with the previous value of juniPolicyInputStatsEnable.
T/F juniPolicyIfOutputStatsEnable	1.3.6.1.4.1.4874.2.2.27.1.4.1.1.6	TruthValue	read-create	This object is used to control the enabling and disabling of statistics for an output policy attachment. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The desired value must be set before the policy is attached or in a multiple object varbind. Failure to do so will result in the policy being attached with the previous value of juniPolicyOutputStatsEnable.
juniPolicyIfAttachTable	1.3.6.1.4.1.4874.2.2.27.1.4.2		not-accessible	This table contains entries which represent attachment of policies to interfaces.
juniPolicyIfAttachEntry	1.3.6.1.4.1.4874.2.2.27.1.4.2.1		not-accessible	Each entry contains the attachment of policy(s) to an interface.
NUM juniPolicyIfAttachInterfaceId	1.3.6.1.4.1.4874.2.2.27.1.4.2.1.1	InterfaceIndex	not-accessible	The interface number representing the interface to which policy(s) have been attached.
JUN juniPolicyIfAttachForwardingType	1.3.6.1.4.1.4874.2.2.27.1.4.2.1.2	JuniPolicyForwardingType	not-accessible	The interface type (i.e. IP or CBF) which the policy have been attached to.
JUN juniPolicyIfAttachPolicyType	1.3.6.1.4.1.4874.2.2.27.1.4.2.1.3	JuniPolicyAttachmentType	not-accessible	The policy type (i.e. input, output or secondary input).
ROW juniPolicyIfAttachRowStatus	1.3.6.1.4.1.4874.2.2.27.1.4.2.1.4	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy * LIMITED ACCESS LIST CONFIGURATION LEVEL * RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list, i.e. create a policy table entry with the associated policy name. destroy Destroy the specified list and all of its constituent elements. Policy row members may not be modified once the row has been created.
I32 juniPolicyIfAttachPolicyId	1.3.6.1.4.1.4874.2.2.27.1.4.2.1.5	Integer32	read-create	This object is used to control the attachment of policies to the interface specified by juniPolicyIfAttachInterfaceId, juniPolicyIfAttachForwardingType and juniPolicyIfAttachPolicyType. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. If so, the attachment is immediate.
T/F juniPolicyIfAttachStatsEnable	1.3.6.1.4.1.4874.2.2.27.1.4.2.1.6	TruthValue	read-create	This object is used to control the enabling and disabling of statistics for a policy attachment. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The desired value must be set before the policy is attached or in a multiple object varbind. Failure to do so will result in the policy being attached with the previous value of juniPolicyIfAttachStatsEnable.
T/F juniPolicyIfAttachStatsPreserve	1.3.6.1.4.1.4874.2.2.27.1.4.2.1.7	TruthValue	read-create	This object is used to control the preserving of statistics when a policy is attached to an interface that already has a policy attachment. Set this object to true to preserve statistics. Get and GetNext will always return false. This object may be modified while the row is active. The desired value must be set before the policy is attached or in a multiple object varbind. Failure to do so will result in the policy being attached with the previous value of juniPolicyIfAttachStatsPreserve.
juniPolicyProfile	1.3.6.1.4.1.4874.2.2.27.1.5
juniPolicyProfileTable	1.3.6.1.4.1.4874.2.2.27.1.5.1		not-accessible	This obsolete table contains entries which represent attachment of policies to dynamic interfaces through profiles. This table became obsolete when the juniPolicyAttachProfileTable was added.
juniPolicyProfileEntry	1.3.6.1.4.1.4874.2.2.27.1.5.1.1		not-accessible	Each entry contains the profile for attachment of policy(s) to a dynamic interface.
U32 juniPolicyProfileId	1.3.6.1.4.1.4874.2.2.27.1.5.1.1.1	Unsigned32	not-accessible	The profile to which the policy attachment profile data belongs. When this profile is applied to a dynamic interface the associated policies will be applied to that interface.
ROW juniPolicyProfileRowStatus	1.3.6.1.4.1.4874.2.2.27.1.5.1.1.2	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy * LIMITED ACCESS LIST CONFIGURATION LEVEL * RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list, i.e. create a policy table entry with the associated policy name. destroy Destroy the specified list and all of its constituent elements. Policy row members may not be modified once the row has been created.
I32 juniPolicyProfileInputPolicyId	1.3.6.1.4.1.4874.2.2.27.1.5.1.1.3	Integer32	read-create	This object is used to control the attachment of input policies to dynamic interfaces configured by the profile identified by juniPolicyProfileId. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. Changes made to a row in this table do not take effect until the profile is applied.
I32 juniPolicyProfileOutputPolicyId	1.3.6.1.4.1.4874.2.2.27.1.5.1.1.4	Integer32	read-create	This object is used to control the attachment of output policies to dynamic interfaces configured by the profile identified by juniPolicyProfileId. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. Changes made to a row in this table do not take effect until the profile is applied to an interface.
T/F juniPolicyProfileInputStatsEnable	1.3.6.1.4.1.4874.2.2.27.1.5.1.1.5	TruthValue	read-create	This object is used to control the enabling and disabling of statistics for an input policy attachment performed by a profile. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The changes will not take effect until the profile is applied to an interface.
T/F juniPolicyProfileOutputStatsEnable	1.3.6.1.4.1.4874.2.2.27.1.5.1.1.6	TruthValue	read-create	This object is used to control the enabling and disabling of statistics for an output policy attachment performed by a profile. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The changes will not take effect until the profile is applied to an interface.
I32 juniPolicyProfileLocalInputPolicyId	1.3.6.1.4.1.4874.2.2.27.1.5.1.1.7	Integer32	read-create	This object is used to control the attachment of local input policies to dynamic interfaces configured by the profile identified by juniPolicyProfileId. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. Changes made to a row in this table do not take effect until the profile is applied.
T/F juniPolicyProfileLocalInputStatsEnable	1.3.6.1.4.1.4874.2.2.27.1.5.1.1.8	TruthValue	read-create	This object is used to control the enabling and disabling of statistics for a local input policy attachment performed by a profile. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The changes will not take effect until the profile is applied to an interface.
juniPolicyAttachProfileTable	1.3.6.1.4.1.4874.2.2.27.1.5.2		not-accessible	This table contains entries which represent attachment of policies to dynamic interfaces through profiles.
juniPolicyAttachProfileEntry	1.3.6.1.4.1.4874.2.2.27.1.5.2.1		not-accessible	Each entry contains the profile for attachment of policy(s) to a dynamic interface.
U32 juniPolicyAttachProfileId	1.3.6.1.4.1.4874.2.2.27.1.5.2.1.1	Unsigned32	not-accessible	The profile to which the policy attachment profile data belongs. When this profile is applied to a dynamic interface the associated policies will be applied to that interface.
JUN juniPolicyAttachProfileForwardingType	1.3.6.1.4.1.4874.2.2.27.1.5.2.1.2	JuniPolicyForwardingType	not-accessible	The interface type (i.e. IP or CBF) which the policy would be attached to.
JUN juniPolicyAttachProfilePolicyType	1.3.6.1.4.1.4874.2.2.27.1.5.2.1.3	JuniPolicyAttachmentType	not-accessible	The policy type (i.e. input, output or secondary input).
ROW juniPolicyAttachProfileRowStatus	1.3.6.1.4.1.4874.2.2.27.1.5.2.1.4	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy * LIMITED ACCESS LIST CONFIGURATION LEVEL * RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list, i.e. create a policy table entry with the associated policy name. destroy Destroy the specified list and all of its constituent elements. Policy row members may not be modified once the row has been created.
I32 juniPolicyAttachProfilePolicyId	1.3.6.1.4.1.4874.2.2.27.1.5.2.1.5	Integer32	read-create	This object is used to control the attachment of policies to dynamic interfaces configured by the profile identified by juniPolicyAttachProfileId, juniPolicyAttachProfileForwardingType and juniPolicyAttachProfilePolicyType. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. Changes made to a row in this table do not take effect until the profile is applied.
T/F juniPolicyAttachProfileStatsEnable	1.3.6.1.4.1.4874.2.2.27.1.5.2.1.6	TruthValue	read-create	This object is used to control the enabling and disabling of statistics for an policy attachment performed by a profile. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The changes will not take effect until the profile is applied to an interface.
juniPolicyStatistics	1.3.6.1.4.1.4874.2.2.27.1.6
juniPolicyIfStatsTable	1.3.6.1.4.1.4874.2.2.27.1.6.1		not-accessible	Each entry within this obsolete table contains statistics data for an interface/policy rule combination. Interfaces with policies attached and statistics disabled are not represented in this table.
juniPolicyIfStatsEntry	1.3.6.1.4.1.4874.2.2.27.1.6.1.1		not-accessible	Each entry defines a single statistics entry.
NUM juniPolicyIfStatsIfId	1.3.6.1.4.1.4874.2.2.27.1.6.1.1.1	InterfaceIndex	not-accessible	The interface ID corresponding to the stats block represented by this row.
JUN juniPolicyIfStatsPolicyType	1.3.6.1.4.1.4874.2.2.27.1.6.1.1.2	JuniPolicyAttachmentType	not-accessible	The attachment point for the policy.
I32 juniPolicyIfStatsPolicyId	1.3.6.1.4.1.4874.2.2.27.1.6.1.1.3	Integer32	not-accessible	The PolicyTable index of the policy corresponding to the stats block represented by this row.
I32 juniPolicyIfStatsRulePrec	1.3.6.1.4.1.4874.2.2.27.1.6.1.1.4	Integer32	not-accessible	The precedence of the policy rule corresponding to the stats block represented by this row.
I32 juniPolicyIfStatsRuleId	1.3.6.1.4.1.4874.2.2.27.1.6.1.1.5	Integer32	not-accessible	The index of the policy rule corresponding to the stats block represented by this row.
I32 juniPolicyIfStatsClaclEntryNumber	1.3.6.1.4.1.4874.2.2.27.1.6.1.1.6	Integer32	not-accessible	The index of the clacl entry number corresponding to the stats block represented by this row.
C64 juniPolicyIfStatsGreenPackets	1.3.6.1.4.1.4874.2.2.27.1.6.1.1.7	Counter64	read-only	The number of green packets policed by the policy rule.
C64 juniPolicyIfStatsYellowPackets	1.3.6.1.4.1.4874.2.2.27.1.6.1.1.8	Counter64	read-only	The number of yellow packets policed by the policy rule.
C64 juniPolicyIfStatsRedPackets	1.3.6.1.4.1.4874.2.2.27.1.6.1.1.9	Counter64	read-only	The number of red packets policed by the policy rule.
C64 juniPolicyIfStatsGreenBytes	1.3.6.1.4.1.4874.2.2.27.1.6.1.1.10	Counter64	read-only	The number of green bytes policed by the policy rule.
C64 juniPolicyIfStatsYellowBytes	1.3.6.1.4.1.4874.2.2.27.1.6.1.1.11	Counter64	read-only	The number of yellow bytes policed by the policy rule.
C64 juniPolicyIfStatsRedBytes	1.3.6.1.4.1.4874.2.2.27.1.6.1.1.12	Counter64	read-only	The number of red bytes policed by the policy rule.
juniPolicyIfAttachStatsTable	1.3.6.1.4.1.4874.2.2.27.1.6.2		not-accessible	Each entry within this obsolete table contains statistics data for an interface/policy rule combination. Interfaces with policies attached and statistics disabled are not represented in this table. This table became obsolete when policy precedence enhancements were made.
juniPolicyIfAttachStatsEntry	1.3.6.1.4.1.4874.2.2.27.1.6.2.1		not-accessible	Each entry defines a single statistics entry.
NUM juniPolicyIfAttachStatsIfId	1.3.6.1.4.1.4874.2.2.27.1.6.2.1.1	InterfaceIndex	not-accessible	The interface ID corresponding to the stats block represented by this row. This object became obsolete when policy precedence enhancements were made.
JUN juniPolicyIfAttachStatsForwardingType	1.3.6.1.4.1.4874.2.2.27.1.6.2.1.2	JuniPolicyForwardingType	not-accessible	The forwarding type for the policy attachment. This object became obsolete when policy precedence enhancements were made.
JUN juniPolicyIfAttachStatsPolicyType	1.3.6.1.4.1.4874.2.2.27.1.6.2.1.3	JuniPolicyAttachmentType	not-accessible	The attachment point for the policy. This object became obsolete when policy precedence enhancements were made.
I32 juniPolicyIfAttachStatsPolicyId	1.3.6.1.4.1.4874.2.2.27.1.6.2.1.4	Integer32	not-accessible	The PolicyTable index of the policy corresponding to the stats block represented by this row. This object became obsolete when policy precedence enhancements were made.
I32 juniPolicyIfAttachStatsRulePrec	1.3.6.1.4.1.4874.2.2.27.1.6.2.1.5	Integer32	not-accessible	The precedence of the policy rule corresponding to the stats block represented by this row. This object became obsolete when policy precedence enhancements were made.
I32 juniPolicyIfAttachStatsRuleId	1.3.6.1.4.1.4874.2.2.27.1.6.2.1.6	Integer32	not-accessible	The index of the policy rule corresponding to the stats block represented by this row. This object became obsolete when policy precedence enhancements were made.
I32 juniPolicyIfAttachStatsClaclEntryNumber	1.3.6.1.4.1.4874.2.2.27.1.6.2.1.7	Integer32	not-accessible	The index of the clacl entry number corresponding to the stats block represented by this row. This object became obsolete when policy precedence enhancements were made.
C64 juniPolicyIfAttachStatsGreenPackets	1.3.6.1.4.1.4874.2.2.27.1.6.2.1.8	Counter64	read-only	The number of green packets policed by the policy rule. This object became obsolete when policy precedence enhancements were made.
C64 juniPolicyIfAttachStatsYellowPackets	1.3.6.1.4.1.4874.2.2.27.1.6.2.1.9	Counter64	read-only	The number of yellow packets policed by the policy rule. This object became obsolete when policy precedence enhancements were made.
C64 juniPolicyIfAttachStatsRedPackets	1.3.6.1.4.1.4874.2.2.27.1.6.2.1.10	Counter64	read-only	The number of red packets policed by the policy rule. This object became obsolete when policy precedence enhancements were made.
C64 juniPolicyIfAttachStatsGreenBytes	1.3.6.1.4.1.4874.2.2.27.1.6.2.1.11	Counter64	read-only	The number of green bytes policed by the policy rule. This object became obsolete when policy precedence enhancements were made.
C64 juniPolicyIfAttachStatsYellowBytes	1.3.6.1.4.1.4874.2.2.27.1.6.2.1.12	Counter64	read-only	The number of yellow bytes policed by the policy rule. This object became obsolete when policy precedence enhancements were made.
C64 juniPolicyIfAttachStatsRedBytes	1.3.6.1.4.1.4874.2.2.27.1.6.2.1.13	Counter64	read-only	The number of red bytes policed by the policy rule. This object became obsolete when policy precedence enhancements were made.
juniPolicyIfAttachStats2Table	1.3.6.1.4.1.4874.2.2.27.1.6.3		not-accessible	Each entry within this table contains statistics data for an interface/clacl rule combination. Interfaces with policies attached and statistics disabled are not represented in this table.
juniPolicyIfAttachStats2Entry	1.3.6.1.4.1.4874.2.2.27.1.6.3.1		not-accessible	Each entry defines a single statistics entry.
NUM juniPolicyIfAttachStatsIfId2	1.3.6.1.4.1.4874.2.2.27.1.6.3.1.1	InterfaceIndex	not-accessible	The interface ID corresponding to the stats block represented by this row.
JUN juniPolicyIfAttachStatsForwardingType2	1.3.6.1.4.1.4874.2.2.27.1.6.3.1.2	JuniPolicyForwardingType	not-accessible	The forwarding type for the policy attachment.
JUN juniPolicyIfAttachStatsPolicyType2	1.3.6.1.4.1.4874.2.2.27.1.6.3.1.3	JuniPolicyAttachmentType	not-accessible	The attachment point for the policy.
I32 juniPolicyIfAttachStatsPolicyId2	1.3.6.1.4.1.4874.2.2.27.1.6.3.1.4	Integer32	not-accessible	The PolicyTable index of the policy corresponding to the stats block represented by this row.
I32 juniPolicyIfAttachStatsClaclId	1.3.6.1.4.1.4874.2.2.27.1.6.3.1.5	Integer32	not-accessible	The ClaclTable index of the clacl corresponding to the stats block represented by this row.
I32 juniPolicyIfAttachStatsClaclEntryNumber2	1.3.6.1.4.1.4874.2.2.27.1.6.3.1.6	Integer32	not-accessible	The index of the clacl entry number corresponding to the stats block represented by this row.
C64 juniPolicyIfAttachStatsGreenPackets2	1.3.6.1.4.1.4874.2.2.27.1.6.3.1.7	Counter64	read-only	The number of green packets policed by the policy rule.
C64 juniPolicyIfAttachStatsYellowPackets2	1.3.6.1.4.1.4874.2.2.27.1.6.3.1.8	Counter64	read-only	The number of yellow packets policed by the policy rule.
C64 juniPolicyIfAttachStatsRedPackets2	1.3.6.1.4.1.4874.2.2.27.1.6.3.1.9	Counter64	read-only	The number of red packets policed by the policy rule.
C64 juniPolicyIfAttachStatsGreenBytes2	1.3.6.1.4.1.4874.2.2.27.1.6.3.1.10	Counter64	read-only	The number of green bytes policed by the policy rule.
C64 juniPolicyIfAttachStatsYellowBytes2	1.3.6.1.4.1.4874.2.2.27.1.6.3.1.11	Counter64	read-only	The number of yellow bytes policed by the policy rule.
C64 juniPolicyIfAttachStatsRedBytes2	1.3.6.1.4.1.4874.2.2.27.1.6.3.1.12	Counter64	read-only	The number of red bytes policed by the policy rule.
juniTrafficShapeControlList	1.3.6.1.4.1.4874.2.2.27.1.7
I32 juniTrafficShapeProfileNextIndex	1.3.6.1.4.1.4874.2.2.27.1.7.1	Integer32	read-only	Obsolete scalar object returns the index of the next available row in the juniTrafficShapeProfileTable. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended. This object became obsolete when the policy shaper capability was moved into the quality of service component.
juniTrafficShapeProfileTable	1.3.6.1.4.1.4874.2.2.27.1.7.2		not-accessible	This table contains entries for elements of Traffic Shape Profile definitions. This table became obsolete when the policy shaper capability was moved into the quality of service component.
juniTrafficShapeProfileEntry	1.3.6.1.4.1.4874.2.2.27.1.7.2.1		not-accessible	Each entry describes the characteristics of a traffic shape profile element.
I32 juniTrafficShapeProfileId	1.3.6.1.4.1.4874.2.2.27.1.7.2.1.1	Integer32	not-accessible	The number of the traffic shape profile entry which is defined by this row.
ROW juniTrafficShapeProfileRowStatus	1.3.6.1.4.1.4874.2.2.27.1.7.2.1.2	RowStatus	read-create	Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniTrafficShapeProfileRowStatus
STR juniTrafficShapeProfileName	1.3.6.1.4.1.4874.2.2.27.1.7.2.1.3	DisplayString	read-create	Specifies the name of the traffic shape profile defined by this row.
C32 juniTrafficShapeReferenceCount	1.3.6.1.4.1.4874.2.2.27.1.7.2.1.4	Counter32	read-only	This object reflects the number of times a traffic shape profile object is referenced by policies.
I32 juniTrafficShapeRate	1.3.6.1.4.1.4874.2.2.27.1.7.2.1.5	Integer32	read-create	The traffic shape rate in bits per second.
I32 juniTrafficShapeBurst	1.3.6.1.4.1.4874.2.2.27.1.7.2.1.6	Integer32	read-create	The traffic shape burst in bytes.
juniPolicyConformance	1.3.6.1.4.1.4874.2.2.27.2
juniPolicyCompliances	1.3.6.1.4.1.4874.2.2.27.2.1
juniPolicyCompliance	1.3.6.1.4.1.4874.2.2.27.2.1.1			Obsolete compliance statement for entities which implement the Juniper policy management MIB. This statement became obsolete when policy traffic shape and color objects were added to the MIB.
juniPolicyCompliance2	1.3.6.1.4.1.4874.2.2.27.2.1.2			Obsolete compliance statement for entities which implement the Juniper policy management MIB. This statement was obsolete when policy log rule objects were added to the MIB.
juniPolicyCompliance3	1.3.6.1.4.1.4874.2.2.27.2.1.3			Obsolete compliance statement for entities which implement the Juniper policy management MIB. This statement became obsolete when policy color rule objects were added, the policy profile table was extended and the policy interface attachement tables were replaced by new versions.
juniPolicyCompliance4	1.3.6.1.4.1.4874.2.2.27.2.1.4			Obsolete compliance statement for entities which implement the Juniper policy management MIB. This statement became obsolete when TCP flag and IP flag classifier control list objects were added and the juniPolicyProfileTable was repalced by the juniPolicyAttachProfileTable.
juniPolicyCompliance5	1.3.6.1.4.1.4874.2.2.27.2.1.5			Obsolete compliance statement for entities which implement the Juniper policy management MIB. This statement became obsolete when traffic class rule objects and new rate limit objects were added and when the policy shaper capability was moved into the quality of service component.
juniPolicyCompliance6	1.3.6.1.4.1.4874.2.2.27.2.1.6			Obsolete compliance statement for entities which implement the Juniper policy management MIB. This statement became obsolete when new forward rules data objects were added.
juniPolicyCompliance7	1.3.6.1.4.1.4874.2.2.27.2.1.7			Obsolete compliance statement for entities which implement the Juniper policy management MIB. This statement became obsolete due to new policy rule table key.
juniPolicyCompliance8	1.3.6.1.4.1.4874.2.2.27.2.1.8			The compliance statement for entities which implement the Juniper policy management MIB. This statement was made obsolete when support for policy sharing was added.
juniPolicyCompliance9	1.3.6.1.4.1.4874.2.2.27.2.1.9			The compliance statement for entities which implement the Juniper policy management MIB. This statement was made obsolete when ATM-cell-mode support was added to the policy configuration.
juniPolicyCompliance10	1.3.6.1.4.1.4874.2.2.27.2.1.10			The compliance statement for entities which implement the Juniper policy management MIB.
juniPolicyGroups	1.3.6.1.4.1.4874.2.2.27.2.2
juniPolicyGroup	1.3.6.1.4.1.4874.2.2.27.2.2.1			Obsolete collection of objects for managing policies in a Juniper product. This group became obsolete when policy traffic shape and color objects were added.
juniRateLimitControlListGroup	1.3.6.1.4.1.4874.2.2.27.2.2.2			Obsolete collection of objects for managing rate limit control lists in a Juniper product. This group became obsolete when it was replaced by the juniRateLimitGroup so that rate limit support could become optional.
juniClassifierControlListGroup	1.3.6.1.4.1.4874.2.2.27.2.2.3			Obsolete collection of objects for managing elements of classifier control lists in a Juniper product. This group became obsolete when support was added for TCP flag and IP flag control objects.
juniPolicyIfGroup	1.3.6.1.4.1.4874.2.2.27.2.2.4			Obsolete collection of objects for managing attachment of policies to interfaces in a Juniper product. This group became obsolete when the juniPolicyIfTable was replaced by the juniPolicyIfAttachTable.
juniPolicyProfileGroup	1.3.6.1.4.1.4874.2.2.27.2.2.5			Obsolete collection of objects for managing attachment of policies to dynamic interfaces through profiles in a Juniper product. This group became obsolete when the juniPolicyProfileLocalInputPolicyId and the juniPolicyProfileLocalInputStatsEnable objects were added.
juniPolicyStatisticsGroup	1.3.6.1.4.1.4874.2.2.27.2.2.6			Obsolete collection of objects for managing statistics data for an interface/policy rule combination in a Juniper product. This group became obsolete when the juniPolicyIfStatsTable was replaced by the juniPolicyIfAttachStatsTable.
juniPolicyGroup2	1.3.6.1.4.1.4874.2.2.27.2.2.7			Obsolete collection of objects for managing policies in a Juniper product. This group became obsolete when the specific rules objects were broken out into separte groups.
juniTrafficShapeProfileGroup	1.3.6.1.4.1.4874.2.2.27.2.2.8			Obsolete collection of objects for traffic shaping data for a policy rule in a Juniper product. This group became obsolete when it was combined with the traffic shape policy rules objects.
juniLogRuleGroup	1.3.6.1.4.1.4874.2.2.27.2.2.9			A deprecated collection of objects for log data for a policy rule in a Juniper product. This group is deprecated due to a new policy rule table key.
juniPolicyIfAttachGroup	1.3.6.1.4.1.4874.2.2.27.2.2.10			A collection of objects for managing attachment of policies to interfaces in a Juniper product. This group statement was made obsolete when support for policy sharing was added.
juniPolicyProfileGroup2	1.3.6.1.4.1.4874.2.2.27.2.2.11			Obsolete collection of objects for managing attachment of policies to dynamic interfaces through profiles. This group became obsolete when the juniPolicyProfileTable was replaced by the juniPolicyAttachProfileTable.
juniPolicyAttachStatisticsGroup	1.3.6.1.4.1.4874.2.2.27.2.2.12			Obsolete collection of objects for managing statistics data for an interface/policy rule combination in a Juniper product.
juniClassifierControlListGroup2	1.3.6.1.4.1.4874.2.2.27.2.2.13			An obsolete collection of objects for managing elements of classifier control lists in a Juniper product.
juniPolicyAttachProfileGroup	1.3.6.1.4.1.4874.2.2.27.2.2.14			A collection of objects for managing attachment of policies to dynamic interfaces through profiles.
juniPolicyBaseGroup	1.3.6.1.4.1.4874.2.2.27.2.2.15			Obsolete collection of basic objects for managing policies in a Juniper product. This group became obsolete when oper status and error value objects were removed.
juniNextHopRulesGroup	1.3.6.1.4.1.4874.2.2.27.2.2.16			A deprecated collection of objects for managing next-hop policy rules in a Juniper product. This group is deprecated due to a new policy rule table key.
juniFilterRulesGroup	1.3.6.1.4.1.4874.2.2.27.2.2.17			A deprecated collection of objects for managing filter policy rules in a Juniper product. This group is deprecated due to a new policy rule table key.
juniNextInterfaceRulesGroup	1.3.6.1.4.1.4874.2.2.27.2.2.18			A deprecated collection of objects for managing next-interface policy rules in a Juniper product. This group is deprecated due to a new policy rule table key.
juniRateLimitGroup	1.3.6.1.4.1.4874.2.2.27.2.2.19			Obsolete collection of objects for managing rate limit policy rules and profile lists in a Juniper product. This group became obsolete when new rate limit profile objects were added.
juniMarkingRulesGroup	1.3.6.1.4.1.4874.2.2.27.2.2.20			A deprecated collection of objects for managing policy rules for marking in a Juniper product. This group is deprecated due to a new policy rule table key.
juniForwardRulesGroup	1.3.6.1.4.1.4874.2.2.27.2.2.21			Obsolete collection of objects for managing forward policy rules in a Juniper product. This group became obsolete when new forward rule data objects were added.
juniTrafficShapeGroup	1.3.6.1.4.1.4874.2.2.27.2.2.22			Obsolete collection of objects for managing traffic shape policy rules and profile lists in a Juniper product. This group became obsolete when the policy shaper capability was moved into the quality of service component.
juniColorRulesGroup	1.3.6.1.4.1.4874.2.2.27.2.2.23			A deprecated collection of objects for managing color policy rules in a Juniper product. This group is deprecated due to a new policy rule table key.
juniTrafficClassRulesGroup	1.3.6.1.4.1.4874.2.2.27.2.2.24			A deprecated collection of objects for managing traffic class policy rules in a Juniper product. This group is deprecated due to a new policy rule table key.
juniRateLimitGroup2	1.3.6.1.4.1.4874.2.2.27.2.2.25			A deprecated collection of objects for managing rate limit policy rules and profile lists in a Juniper product. This group is deprecated due to a new policy rule table key.
juniForwardRulesGroup2	1.3.6.1.4.1.4874.2.2.27.2.2.26			A deprecated collection of objects for managing forward policy rules in a Juniper product. This group is deprecated due to a new policy rule table key.
juniNextHopRulesGroup2	1.3.6.1.4.1.4874.2.2.27.2.2.27			A collection of objects for managing next-hop policy rules in a Juniper product.
juniFilterRulesGroup2	1.3.6.1.4.1.4874.2.2.27.2.2.28			A collection of objects for managing filter policy rules in a Juniper product.
juniNextInterfaceRulesGroup2	1.3.6.1.4.1.4874.2.2.27.2.2.29			A collection of objects for managing next-interface policy rules in a Juniper product.
juniMarkingRulesGroup2	1.3.6.1.4.1.4874.2.2.27.2.2.30			A collection of objects for managing policy rules for marking in a Juniper product.
juniColorRulesGroup2	1.3.6.1.4.1.4874.2.2.27.2.2.31			A collection of objects for managing color policy rules in a Juniper product.
juniTrafficClassRulesGroup2	1.3.6.1.4.1.4874.2.2.27.2.2.32			A collection of objects for managing traffic class policy rules in a Juniper product.
juniRateLimitGroup3	1.3.6.1.4.1.4874.2.2.27.2.2.33			A collection of objects for managing rate limit policy rules and profile lists in a Juniper product.
juniPolicyClaclGrpGroup	1.3.6.1.4.1.4874.2.2.27.2.2.34			A collection of objects for managing policy classifier groups in a Juniper product.
juniPolicyBaseGroup2	1.3.6.1.4.1.4874.2.2.27.2.2.35			A collection of basic objects for managing policies in a Juniper product. This group was made obsolete when ATM-cell-mode support was added to the policy configuration.
juniForwardRulesGroup3	1.3.6.1.4.1.4874.2.2.27.2.2.36			A collection of objects for managing forward policy rules in a Juniper product.
juniLogRuleGroup2	1.3.6.1.4.1.4874.2.2.27.2.2.37			A collection of objects for log data for a policy rule in a Juniper product.
juniPolicyAttachStatisticsGroup2	1.3.6.1.4.1.4874.2.2.27.2.2.38			A collection of objects for managing statistics data for an interface/policy rule combination in a Juniper product.
juniClassifierControlListGroup3	1.3.6.1.4.1.4874.2.2.27.2.2.39			A collection of objects for managing elements of classifier control lists in a Juniper product.
juniPolicyIfAttachGroup2	1.3.6.1.4.1.4874.2.2.27.2.2.40			A collection of objects for managing attachment of policies to interfaces in a Juniper product.
juniExceptionRulesGroup1	1.3.6.1.4.1.4874.2.2.27.2.2.41			A collection of objects for managing exception policy rules in a Juniper product.
juniPolicyBaseGroup3	1.3.6.1.4.1.4874.2.2.27.2.2.42			A collection of basic objects for managing policies in a Juniper product.

RFC description

Juniper Networks MIB for managing routing policy filters, match conditions, and actions on Juniper E-series routers.

Start monitoring Juniper E-series router (routing/traffic policy filters, QoS classifiers) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Juniper-POLICY-MIB