JUNIPER-RTM-MIB

All MIBs › JUNIPER-RTM-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2009-05-04

Category: Technology: Routing, Vendor: Juniper

Description: Juniper Networks MIB for Real-Time Monitor (RTM) providing routing table statistics and forwarding information on Juniper platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is JUNIPER-RTM-MIB?

Despite its short name suggesting a routing-table or generic real-time monitor MIB, the module's actual description and object set show this is Juniper's Real-Time Media (voice/telephony) configuration MIB, covering SIP and analog voice-port templates used on Juniper routers with integrated voice gateway capability. It exposes configuration data for voice services: SIP templates specifying codec selection (G.711 mu-law/A-law, G.729AB), DTMF signaling method, caller ID transmission, class of restriction, and extension inheritance, plus separate analog-line templates. Monitoring emphasis here is primarily configuration/software-state rather than hardware counters — administrators use it to confirm which SIP or analog templates and codec/DTMF settings are applied to voice-enabled interfaces, which indirectly reflects the software status of the router's voice gateway feature set. This MIB works alongside Juniper's voice/telephony (SIP proxy/gateway) feature set rather than a single IETF standard, and complements interface MIBs for the physical voice ports it configures. It is used on Juniper routers with integrated voice interfaces (e.g. branch-office integrated services routers with FXS/FXO ports or SIP trunking) providing branch-office voice services, and administrators often browse its templates with a JUNIPER-RTM-MIB MIB Browser to confirm the correct codec and DTMF settings are applied.

IPNetwork Monitor allows you to monitor SNMP objects defined in JUNIPER-RTM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper router with integrated voice/SIP gateway

Monitoring Examples

An administrator would inspect jnxSipTemplateTable/jnxSipTemplateEntry by jnxSipTemplateName to verify which jnxCodecG711MU, jnxCodecG711A, or jnxCodecG729AB codec settings and jnxDtmfMethod are applied to a given SIP trunk template, confirming a misconfigured codec isn't causing call-quality issues. jnxAnalogTemplateTable would be checked similarly for analog (FXS/FXO) port templates, and jnxCallerIdTransmit/jnxClassOfRestriction settings reveal whether caller ID and call-restriction policies are correctly inherited via jnxInheritExtensionsFrom/jnxInheritExtensionsTo. This is largely a configuration-verification MIB rather than a live performance-counter source.

What Can Be Monitored

SIP template codec configuration (G.711/G.729)
DTMF signaling method
caller ID transmission setting
analog line template configuration
class of restriction / extension inheritance settings

Imported Objects

From JUNIPER-JS-SMI

jnxVoip

OBJECT-IDENTITY

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT jnxAanalogCallerIdTransmit	1.3.6.1.4.1.2636.3.39.1.15.1.1.2.1.2	INTEGER	read-only	Caller id transmit for outgoing calls
STR jnxAnalogClassOfRestriction	1.3.6.1.4.1.2636.3.39.1.15.1.1.2.1.5	DisplayString	read-only	Class of restriction policies
INT jnxAnalogComfortNoiseGeneration	1.3.6.1.4.1.2636.3.39.1.15.1.1.2.1.4	INTEGER	read-only	Comfort noise generation during silence
jnxAnalogTemplateEntry	1.3.6.1.4.1.2636.3.39.1.15.1.1.2.1		not-accessible	A row of analog template objects.
STR jnxAnalogTemplateName	1.3.6.1.4.1.2636.3.39.1.15.1.1.2.1.1	DisplayString	not-accessible	Analog template name
jnxAnalogTemplateTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.2		not-accessible	This table contains the analog template objects.
INT jnxAnalogVoiceActivityDetection	1.3.6.1.4.1.2636.3.39.1.15.1.1.2.1.3	INTEGER	read-only	Voice activity detection
INT jnxCallerIdTransmit	1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.3	INTEGER	read-only	Caller id transmit for outgoing calls
STR jnxClassOfRestriction	1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.6	DisplayString	read-only	Class of restriction policies
jnxClassOfRestrictionEntry	1.3.6.1.4.1.2636.3.39.1.15.1.1.11.1		not-accessible	A row of class of restriction configuration objects.
STR jnxClassOfRestrictionName	1.3.6.1.4.1.2636.3.39.1.15.1.1.11.1.1	DisplayString	not-accessible	Class of restriction name.
jnxClassOfRestrictionTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.11		not-accessible	This table contains the class of restriction configuration objects.
INT jnxCodecG711A	1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.8	INTEGER	read-only	G711-A - 13 bit PCM 8 kHz sample, 64 kbit/s bitstream.
INT jnxCodecG711MU	1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.7	INTEGER	read-only	G711-MU - 14 bit PCM 8 kHz sample, 64 kbit/s bitstream.
INT jnxCodecG729AB	1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.9	INTEGER	read-only	G729AB - CS-ACELP, 8 kbit/s bitstream
STR jnxDialPlanCallType	1.3.6.1.4.1.2636.3.39.1.15.1.1.9.1.3	DisplayString	read-only	Call type.
STR jnxDialPlanDigitPattern	1.3.6.1.4.1.2636.3.39.1.15.1.1.9.1.2	DisplayString	not-accessible	Digit pattern.
jnxDialPlanEntry	1.3.6.1.4.1.2636.3.39.1.15.1.1.9.1		not-accessible	A row of dial plan.
STR jnxDialPlanName	1.3.6.1.4.1.2636.3.39.1.15.1.1.9.1.1	DisplayString	not-accessible	The name of the dial plan
jnxDialPlanTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.9		not-accessible	This table contains the dial plan for survivable call service configuration objects.
STR jnxDialPlanTrunkGroupList	1.3.6.1.4.1.2636.3.39.1.15.1.1.9.1.4	DisplayString	read-only	A list of associated trunk groups.
jnxDigitManipulationEntry	1.3.6.1.4.1.2636.3.39.1.15.1.1.6.1		not-accessible	A row of digit transform rule in the table.
jnxDigitManipulationTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.6		not-accessible	This table contains the digit manipulation objects.
STR jnxDigitTransformName	1.3.6.1.4.1.2636.3.39.1.15.1.1.6.1.1	DisplayString	not-accessible	The name of the transform rule.
STR jnxDigitTransformRegularExpression	1.3.6.1.4.1.2636.3.39.1.15.1.1.6.1.2	DisplayString	read-only	The digit transform regular expression.
INT jnxDtmfMethod	1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.2	INTEGER	read-only	DTMF method
jnxFeatures	1.3.6.1.4.1.2636.3.39.1.15.1.1.8
INT jnxFeaturesAttendantRingCount	1.3.6.1.4.1.2636.3.39.1.15.1.1.8.4	INTEGER	read-only	Ring count wait before using auto attendant
STR jnxFeaturesLiveAttendantEndTime	1.3.6.1.4.1.2636.3.39.1.15.1.1.8.3	DisplayString	read-only	End time for availability.
STR jnxFeaturesLiveAttendantExtension	1.3.6.1.4.1.2636.3.39.1.15.1.1.8.1	DisplayString	read-only	Live attentant's extension
STR jnxFeaturesLiveAttendantStartTime	1.3.6.1.4.1.2636.3.39.1.15.1.1.8.2	DisplayString	read-only	Start time for availability.
STR jnxFeaturesVoicemailExtension	1.3.6.1.4.1.2636.3.39.1.15.1.1.8.5	DisplayString	read-only	Voicemail extension
STR jnxFeaturesVoicemailRemoteAccessNumber	1.3.6.1.4.1.2636.3.39.1.15.1.1.8.6	DisplayString	read-only	Remote access number to reach voicemail
STR jnxInheritExtensionsFrom	1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.4	DisplayString	read-only	Inherit extensions in range starting from
STR jnxInheritExtensionsTo	1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.5	DisplayString	read-only	Inherit extensions in range up to
STR jnxMediaGatewayDialPlan	1.3.6.1.4.1.2636.3.39.1.15.1.1.12.1.5	DisplayString	read-only	Dial plan for survivable call service.
jnxMediaGatewayEntry	1.3.6.1.4.1.2636.3.39.1.15.1.1.12.1		not-accessible	A row of media gateway configuration objects.
STR jnxMediaGatewayName	1.3.6.1.4.1.2636.3.39.1.15.1.1.12.1.1	DisplayString	not-accessible	Media gateway name.
STR jnxMediaGatewayPeerCallServer	1.3.6.1.4.1.2636.3.39.1.15.1.1.12.1.2	DisplayString	read-only	Peer call server.
INT jnxMediaGatewaySipProtocolPort	1.3.6.1.4.1.2636.3.39.1.15.1.1.12.1.3	INTEGER	read-only	Port number for signaling.
INT jnxMediaGatewaySipProtocolTransport	1.3.6.1.4.1.2636.3.39.1.15.1.1.12.1.4	INTEGER	read-only	Transport type for signaling.
jnxMediaGatewayTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.12		not-accessible	This table contains the media gateway configuration objects.
STR jnxPeerCallServerAddress	1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.3	DisplayString	read-only	ipv4 or ipv6 address
STR jnxPeerCallServerAuthId	1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.11	DisplayString	read-only	Authentication identifier
INT jnxPeerCallServerCodecG711A	1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.7	INTEGER	read-only	G711-A - 13 bit PCM 8 kHz sample, 64 kbit/s bitstream.
INT jnxPeerCallServerCodecG711MU	1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.6	INTEGER	read-only	G711-MU - 14 bit PCM 8 kHz sample, 64 kbit/s bitstream.
INT jnxPeerCallServerCodecG729AB	1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.8	INTEGER	read-only	G729AB - CS-ACELP, 8 kbit/s bitstream
STR jnxPeerCallServerDescription	1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.2	DisplayString	read-only	Description.
INT jnxPeerCallServerDtmfMethod	1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.9	INTEGER	read-only	DTMF method.
jnxPeerCallServerEntry	1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1		not-accessible	A row of peer call server configuration objects.
STR jnxPeerCallServerName	1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.1	DisplayString	not-accessible	Peer call server name
STR jnxPeerCallServerPstnAccessNumber	1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.10	DisplayString	read-only	PSTN access number for survivable call service
INT jnxPeerCallServerSipProtocolPort	1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.4	INTEGER	read-only	Port number for signaling
INT jnxPeerCallServerSipProtocolTransport	1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.5	INTEGER	read-only	Transport type for signaling.
jnxPeerCallServerTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.7		not-accessible	This table contains the peer call server configuration objects.
INT jnxRestrictionCallPermission	1.3.6.1.4.1.2636.3.39.1.15.1.1.11.1.4	INTEGER	read-only	Call permission.
STR jnxRestrictionCallType	1.3.6.1.4.1.2636.3.39.1.15.1.1.11.1.3	DisplayString	read-only	Call type.
STR jnxRestrictionPolicyName	1.3.6.1.4.1.2636.3.39.1.15.1.1.11.1.2	DisplayString	not-accessible	Class of restriction policy name.
jnxRtmMIB	1.3.6.1.4.1.2636.3.39.1.15.1			This is Juniper Networks' implementation of enterprise specific MIB for Real Time Media configuration.
jnxRtmMIBObjects	1.3.6.1.4.1.2636.3.39.1.15.1.1
jnxSipTemplateEntry	1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1		not-accessible	A row of SIP station template objects.
STR jnxSipTemplateName	1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.1	DisplayString	not-accessible	SIP template name
jnxSipTemplateTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.1		not-accessible	This table contains the SIP station template objects.
STR jnxStationAuthId	1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.9	DisplayString	read-only	Authenitcation identifier
STR jnxStationCallerId	1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.5	DisplayString	read-only	The station's caller id
STR jnxStationDID	1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.6	DisplayString	read-only	Direct inward dialing number
STR jnxStationDILTdmInterface	1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.7	DisplayString	read-only	Direct inward line TDM interface.
U32 jnxStationDILTimeSlotNumber	1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.8	Unsigned32	read-only	Direct inward line time slot number.
jnxStationEntry	1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1		not-accessible	A row of station configuration objects.
STR jnxStationExtension	1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.2	DisplayString	read-only	The station's extension
STR jnxStationName	1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.1	DisplayString	not-accessible	The name of the station.
STR jnxStationRestriction	1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.3	DisplayString	read-only	Class of restriction
jnxStationTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.3		not-accessible	This table contains the station configuration objects.
STR jnxStationTdmInterface	1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.12	DisplayString	read-only	TDM interface. If the station type is sip this object is not applicable and contains a null string.
STR jnxStationTemplate	1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.11	DisplayString	read-only	The station's template name
U32 jnxStationTimeSlotNumber	1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.13	Unsigned32	read-only	Time Slot Number. If the station type is sip this object is not applicable.
INT jnxStationType	1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.10	INTEGER	read-only	Station type
STR jnxSurvivableCallServiceDialPlan	1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.12	DisplayString	read-only	Dial plan for survivable call service
jnxSurvivableCallServiceEntry	1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1		not-accessible	A row of survivable call service configuration objects.
INT jnxSurvivableCallServiceHeartbeatNormalInterval	1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.5	INTEGER	read-only	Heartbeat interval in seconds in normal state.
INT jnxSurvivableCallServiceHeartbeatSurvivableInterval	1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.9	INTEGER	read-only	Heartbeat interval in miliseconds in survivable state.
INT jnxSurvivableCallServiceMonitorTimeout	1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.8	INTEGER	read-only	Timeout to monitor in seconds if peer call server is reachable.
STR jnxSurvivableCallServiceName	1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.1	DisplayString	not-accessible	The survivable call service name.
STR jnxSurvivableCallServicePeerCallServer	1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.2	DisplayString	read-only	Peer call server for survivable call service
INT jnxSurvivableCallServiceRegistrationExpiryTimeout	1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.6	INTEGER	read-only	Registration expiry timeout in seconds for stations registered.
INT jnxSurvivableCallServiceResponseThresholdMinimum	1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.10	INTEGER	read-only	Minimum response threshold value in percent.
STR jnxSurvivableCallServiceServicePointZone	1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.11	DisplayString	read-only	Zone for using survivable call service
INT jnxSurvivableCallServiceSipProtocolPort	1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.3	INTEGER	read-only	Port number for signaling.
INT jnxSurvivableCallServiceSipProtocolTransport	1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.4	INTEGER	read-only	Transport type for signaling.
INT jnxSurvivableCallServiceSipTimeout	1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.7	INTEGER	read-only	Timeout in seconds to declare peer call server is not reachable.
jnxSurvivableCallServiceTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.4		not-accessible	This table contains the survivable call service configuration objects.
IP jnxSurvivableStatsAddress	1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.1	IpAddress	not-accessible	The Ip Address of the remote SIP service.
U32 jnxSurvivableStatsAvgResponse	1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.14	Unsigned32	read-only	The average response time in miliseconds.
INT jnxSurvivableStatsCurrentState	1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.6	INTEGER	read-only	Current state.
jnxSurvivableStatsEntry	1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1		not-accessible	A row of survivable call service statistics.
U32 jnxSurvivableStatsLastDownLen	1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.9	Unsigned32	read-only	How long (miliseconds) it was down last time.
STR jnxSurvivableStatsLastDownTime	1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.8	DisplayString	read-only	The last time when the survivable call service was down.
U32 jnxSurvivableStatsMaxResponse	1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.13	Unsigned32	read-only	The maximum response time in miliseconds.
U32 jnxSurvivableStatsMinResponse	1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.12	Unsigned32	read-only	The minimum response time in miliseconds.
STR jnxSurvivableStatsPeerCallServer	1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.5	DisplayString	read-only	Peer Call Server.
U32 jnxSurvivableStatsPort	1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.2	Unsigned32	not-accessible	The port number.
INT jnxSurvivableStatsPriority	1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.7	INTEGER	read-only	Priority in terms of responsiveness
STR jnxSurvivableStatsSCSName	1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.4	DisplayString	read-only	Name of the Survivable Call Service.
jnxSurvivableStatsTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.14		not-accessible	This table contains the survivable call service statistics objects.
U32 jnxSurvivableStatsTimesDown	1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.11	Unsigned32	read-only	The number of times it was down
U32 jnxSurvivableStatsTotalDownTime	1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.10	Unsigned32	read-only	Total down time in miliseconds.
INT jnxSurvivableStatsTransport	1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.3	INTEGER	not-accessible	Transport type.
jnxTrunkConfigEntry	1.3.6.1.4.1.2636.3.39.1.15.1.1.5.1		not-accessible	A row of trunk configuration objects.
STR jnxTrunkConfigName	1.3.6.1.4.1.2636.3.39.1.15.1.1.5.1.1	DisplayString	not-accessible	The trunk configuration name.
INT jnxTrunkConfigT1CasGroupSignaling	1.3.6.1.4.1.2636.3.39.1.15.1.1.5.1.5	INTEGER	read-only	Channel associated signaling type.
STR jnxTrunkConfigT1CasGroupTimeSlots	1.3.6.1.4.1.2636.3.39.1.15.1.1.5.1.4	DisplayString	read-only	Channel associated signaling time slot configuration.
jnxTrunkConfigTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.5		not-accessible	This table contains the trunk configuration objects.
STR jnxTrunkConfigTdmInterface	1.3.6.1.4.1.2636.3.39.1.15.1.1.5.1.3	DisplayString	read-only	The TDM interface.
INT jnxTrunkConfigType	1.3.6.1.4.1.2636.3.39.1.15.1.1.5.1.2	INTEGER	read-only	The trunk type.
STR jnxTrunkGroupDescription	1.3.6.1.4.1.2636.3.39.1.15.1.1.13.1.2	DisplayString	read-only	Description of this trunk group.
jnxTrunkGroupEntry	1.3.6.1.4.1.2636.3.39.1.15.1.1.13.1		not-accessible	A row of trunk group configuration objects.
STR jnxTrunkGroupName	1.3.6.1.4.1.2636.3.39.1.15.1.1.13.1.1	DisplayString	not-accessible	Name of this trunk group.
jnxTrunkGroupTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.13		not-accessible	This table contains the trunk group configuration objects.
STR jnxTrunkGroupTrunkList	1.3.6.1.4.1.2636.3.39.1.15.1.1.13.1.3	DisplayString	read-only	A list of trunks associated with this group.

RFC description

Manages real-time media configuration including SIP templates, codecs, and DTMF settings for VoIP services.

Start monitoring Juniper router with integrated voice/SIP gateway (Real-Time Media config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download JUNIPER-RTM-MIB

What Is JUNIPER-RTM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description