All MIBs › Juniper-DS3-CONF
Organization: Juniper Networks, Inc.
Last Updated: 2003-09-29
Category: Domain: WAN/TDM, Vendor: Juniper
Description: Defines conformance statements for DS3 (T3) interface management on Juniper Networks E-series platforms.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Juniper-DS3-CONF?
Juniper-DS3-CONF is an AGENT-CAPABILITIES conformance module for Juniper Networks E-series routing platforms, describing which objects and features of the standard DS3 (T3) interface MIB the SNMP agent actually implements. As a conformance statement rather than a data-bearing MIB, it does not itself expose runtime counters or configuration objects; instead it documents implementation coverage of the DS3 interface MIB for that platform. It has no direct hardware/software monitoring value on its own — it is a compliance/compatibility reference used by NMS tooling to know what a Juniper E-series agent supports for DS3 interfaces before that data is actually polled. It is inherently and entirely dependent on the underlying DS3/T3 interface MIB it provides capabilities for. It is used during NMS integration and MIB-compliance validation rather than in live device monitoring dashboards. Engineers can download the Juniper-DS3-CONF file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-DS3-CONF. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Juniper Networks E-series router (DS3/T3 interfaces)
Monitoring Examples
This is a conformance/AGENT-CAPABILITIES module with no runtime data objects (sample_objects is empty), so no concrete monitoring scenario can be honestly described. It would instead be consulted by an NMS or MIB browser to confirm which DS3 interface objects are supported before configuring DS3 polling on a Juniper E-series router.
Imported Objects
From Juniper-Agents
| juniAgents | MODULE-IDENTITY |
From SNMPv2-CONF
| AGENT-CAPABILITIES |
From SNMPv2-SMI
| MODULE-IDENTITY |
OIDs
RFC description
Agent capabilities definitions for DS3 (Digital Signal 3) component support in Juniper E-series SNMP agent; handles DS3 interface management.
Start monitoring Juniper Networks E-series router (agent capabilities, DS3/T3 interfaces) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.