Unisphere-Data-PPPOE-MIB

All MIBs › Unisphere-Data-PPPOE-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2002-08-16

Category: Juniper Unisphere ERX Routing

Description: Manages Juniper/Unisphere ERX PPPoE session configuration, AC name, service name, and statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Unisphere-Data-PPPOE-MIB?

Unisphere-Data-PPPOE-MIB is a Juniper Networks (Unisphere Networks heritage, ERX edge router) proprietary MIB reporting PPPoE (PPP over Ethernet) interface configuration and discovery-stage statistics. Its interface table, keyed by index, records max session count, row status, lower interface, access-concentrator name, duplicate-session-protection flag, PADI-flag, and autoconfig setting, while a statistics table counts received PADI/PADR/PADT and sent PADO/PADS/PADT frames plus invalid-version/code/tags/session/types/packets counts. As a configuration/performance MIB it lets an administrator watch PPPoE discovery-stage traffic and catch malformed discovery packets. It is deployed on Juniper Networks (Unisphere/ERX) edge routers. Engineers can download the Unisphere-Data-PPPOE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Unisphere-Data-PPPOE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks (Unisphere/ERX) edge routers

Monitoring Examples

An administrator checks usdPPPoEIfStatsRxInvTypes to catch malformed PPPoE discovery packets arriving on a Juniper (Unisphere ERX) edge router.

What Can Be Monitored

PPPoE interface configuration and discovery-stage traffic

Imported Objects

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus

From Unisphere-Data-MIBs

usDataMibs

MODULE-IDENTITY

From Unisphere-Data-TC

UsdEnable
UsdNextIfIndex

How to Use in IPNetwork Monitor

Example using usdPPPoEIfStatsRxPADI OID:

Select a Juniper Networks (Unisphere/ERX) edge router (PPPoE discovery-stage traffic/error status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type usdPPPoEIfStatsRxPADI into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of PADI packets received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
usdPPPoECompliance	1.3.6.1.4.1.4874.2.2.18.4.5.1			Obsolete compliance statement for entities which implement the Unisphere PPPoE MIB. This statement became obsolete when profile support and new sub-interface objects were added.
usdPPPoECompliance2	1.3.6.1.4.1.4874.2.2.18.4.5.2			Obsolete compliance statement for entities which implement the Unisphere PPPoE MIB. This statement became obsolete when interface summary statistics objects were added.
usdPPPoECompliance3	1.3.6.1.4.1.4874.2.2.18.4.5.3			Obsolete compliance statement for entities which implement the Unisphere PPPoE MIB. This statement became obsolete when the profile objects were deprecated.
usdPPPoECompliance4	1.3.6.1.4.1.4874.2.2.18.4.5.4			Obsolete compliance statement for entities which implement the Unisphere PPPoE MIB. This statement became obsolete when new objects were added.
usdPPPoECompliance5	1.3.6.1.4.1.4874.2.2.18.4.5.5			Obsolete compliance statement for entities which implement the Unisphere PPPoE MIB. This statement became obsolete when PADI flag support was added.
usdPPPoECompliance6	1.3.6.1.4.1.4874.2.2.18.4.5.6			The compliance statement for entities which implement the Unisphere PPPoE MIB.
usdPPPoECompliances	1.3.6.1.4.1.4874.2.2.18.4.5
usdPPPoEConformance	1.3.6.1.4.1.4874.2.2.18.4
usdPPPoEGlobal	1.3.6.1.4.1.4874.2.2.18.1.3
STR usdPPPoEGlobalMotm	1.3.6.1.4.1.4874.2.2.18.1.3.1	DisplayString	read-write	A message to send via a PADM to all sub-interface that are currently in ifOperStatusUp state. A client may choose to display this information to the user. Retrieving this object always returns a null string.
usdPPPoEGroup	1.3.6.1.4.1.4874.2.2.18.4.4.1			Obsolete collection of objects providing management of PPPoE interfaces in a Unisphere product. This statement became obsolete when new objects were added.
usdPPPoEGroup2	1.3.6.1.4.1.4874.2.2.18.4.4.4			Obsolete collection of objects providing management of PPPoE interfaces in a Unisphere product. This statement became obsolete when new objects were added.
usdPPPoEGroup3	1.3.6.1.4.1.4874.2.2.18.4.4.7			Obsolete collection of objects providing management of PPPoE interfaces in a Unisphere product. This group became obsolete when PADI flag support was added.
usdPPPoEGroup4	1.3.6.1.4.1.4874.2.2.18.4.4.8			A collection of objects providing management of PPPoE interfaces in a Unisphere product.
usdPPPoEGroups	1.3.6.1.4.1.4874.2.2.18.4.4
STR usdPPPoEIfAcName	1.3.6.1.4.1.4874.2.2.18.1.1.2.1.5	DisplayString	read-create	The name to use for the AC-NAME tag that is sent in any PADO that is sent on this interface.
USD usdPPPoEIfAutoconfig	1.3.6.1.4.1.4874.2.2.18.1.1.2.1.8	UsdEnable	read-create	This flags determines whether the upper PPPoE interface is created dynamically or statically. When enable(1) the interface is created dynamically.
USD usdPPPoEIfDupProtect	1.3.6.1.4.1.4874.2.2.18.1.1.2.1.6	UsdEnable	read-create	Flag to allow duplicate MAC addresses.
usdPPPoEIfEntry	1.3.6.1.4.1.4874.2.2.18.1.1.2.1		not-accessible	The Parameters for a particular PPPoE interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/usdIfTable, and usdPPPoEIfStatsTable.
NUM usdPPPoEIfIfIndex	1.3.6.1.4.1.4874.2.2.18.1.1.2.1.1	InterfaceIndex	read-only	The ifIndex value of the corresponding ifEntry.
usdPPPoEIfLayer	1.3.6.1.4.1.4874.2.2.18.1.1
NUM usdPPPoEIfLowerIfIndex	1.3.6.1.4.1.4874.2.2.18.1.1.2.1.4	InterfaceIndexOrZero	read-create	The ifIndex of an interface over which this PPPoE interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
INT usdPPPoEIfMaxNumSessions	1.3.6.1.4.1.4874.2.2.18.1.1.2.1.2	INTEGER	read-create	The number of sessions allowed on the PPPoE interface, zero indicates unlimited.
USD usdPPPoEIfPADIFlag	1.3.6.1.4.1.4874.2.2.18.1.1.2.1.7	UsdEnable	read-create	This flag controls whether always repsond to a PADI with a PADO regardless of the ability to create the session and allows the session establish phase to resolve it.
ROW usdPPPoEIfRowStatus	1.3.6.1.4.1.4874.2.2.18.1.1.2.1.3	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdPPPoEIfRowStatus usdPPPoEIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for usdPPPoEIfIndex must have been determined previously, by reading usdPPPoENextIfIndex. The interface identified by usdPPPoEIfLowerIfIndex must exist, and must be an interface type that permits layering of PPPoE above it. A corresponding entry in ifTable/ifXTable/usdIfTable is created or destroyed as a result of creating or destroying an entry in this table.
usdPPPoEIfStatsEntry	1.3.6.1.4.1.4874.2.2.18.1.1.3.1		not-accessible	The statistics for a particular PPPoE Interface.
C32 usdPPPoEIfStatsRxInsufficientResources	1.3.6.1.4.1.4874.2.2.18.1.1.3.1.13	Counter32	read-only	Number of session requests that could not be honored due to invalid resources.
C32 usdPPPoEIfStatsRxInvCode	1.3.6.1.4.1.4874.2.2.18.1.1.3.1.8	Counter32	read-only	Number of packets received with invalid code.
C32 usdPPPoEIfStatsRxInvPackets	1.3.6.1.4.1.4874.2.2.18.1.1.3.1.12	Counter32	read-only	Number of invalid packets received.
C32 usdPPPoEIfStatsRxInvSession	1.3.6.1.4.1.4874.2.2.18.1.1.3.1.10	Counter32	read-only	Number of packets received with invalid session identifiers.
C32 usdPPPoEIfStatsRxInvTags	1.3.6.1.4.1.4874.2.2.18.1.1.3.1.9	Counter32	read-only	Number of packets received with invalid tags.
C32 usdPPPoEIfStatsRxInvTypes	1.3.6.1.4.1.4874.2.2.18.1.1.3.1.11	Counter32	read-only	Number of packets received with invalid types.
C32 usdPPPoEIfStatsRxInvVersion	1.3.6.1.4.1.4874.2.2.18.1.1.3.1.7	Counter32	read-only	Number of packets received with invalid version.
C32 usdPPPoEIfStatsRxPADIEx	1.3.6.1.4.1.4874.2.2.18.1.1.3.1.1	Counter32	read-only	Number of PADI packets received.
C32 usdPPPoEIfStatsRxPADR	1.3.6.1.4.1.4874.2.2.18.1.1.3.1.3	Counter32	read-only	Number of PADR packets received.
C32 usdPPPoEIfStatsRxPADT	1.3.6.1.4.1.4874.2.2.18.1.1.3.1.5	Counter32	read-only	Number of PADT packets received.
usdPPPoEIfStatsTable	1.3.6.1.4.1.4874.2.2.18.1.1.3		not-accessible	The statistics for the PPP over Ethernet Interface for the PPPoE service on this interface.
C32 usdPPPoEIfStatsTxPADM	1.3.6.1.4.1.4874.2.2.18.1.1.3.1.14	Counter32	read-only	Number of PADM packets transmitted.
C32 usdPPPoEIfStatsTxPADO	1.3.6.1.4.1.4874.2.2.18.1.1.3.1.2	Counter32	read-only	Number of PADO packets transmitted.
C32 usdPPPoEIfStatsTxPADS	1.3.6.1.4.1.4874.2.2.18.1.1.3.1.4	Counter32	read-only	Number of PADS packets transmitted.
C32 usdPPPoEIfStatsTxPADT	1.3.6.1.4.1.4874.2.2.18.1.1.3.1.6	Counter32	read-only	Number of PADT packets transmitted.
usdPPPoEIfTable	1.3.6.1.4.1.4874.2.2.18.1.1.2		not-accessible	The parameters for the PPPoE service on this interface.
I32 usdPPPoEMajorInterfaceCount	1.3.6.1.4.1.4874.2.2.18.1.5.1	Integer32	read-only	The total number of PPPoE major interfaces configured and created in the system.
usdPPPoEMIB	1.3.6.1.4.1.4874.2.2.18			The Point-to-Point Protocol over Ethernet (PPPoE) MIB for the Juniper edge router enterprise.
USD usdPPPoENextIfIndex	1.3.6.1.4.1.4874.2.2.18.1.1.1	UsdNextIfIndex	read-only	Coordinate ifIndex value allocation for entries in usdPPPoEIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
usdPPPoEObjects	1.3.6.1.4.1.4874.2.2.18.1
usdPPPoEProfile	1.3.6.1.4.1.4874.2.2.18.1.4
usdPPPoEProfileEntry	1.3.6.1.4.1.4874.2.2.18.1.4.1.1		not-accessible	Each entry describes the characteristics of the PPPoE components of a profile entry. Each entry is applied to an interface when the IP interface above the PPPoE sub-interface becomes active.
usdPPPoEProfileGroup	1.3.6.1.4.1.4874.2.2.18.4.4.3			A collection of objects providing management of PPPoE profile entries in a Unisphere product. This group has been deprecated because the information is now supported in the UNISPHERE-PPPOE-PROFILE-MIB.
U32 usdPPPoEProfileIndex	1.3.6.1.4.1.4874.2.2.18.1.4.1.1.1	Unsigned32	not-accessible	This is the index of the profile that the attributes are being set in. The index must exist before creating a row in this table. The index is equivalent to usdProfileIdId in the usdProfileIdTable.
STR usdPPPoEProfileMotm	1.3.6.1.4.1.4874.2.2.18.1.4.1.1.3	DisplayString	read-create	A message to send via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub-interface. A client may choose to display this message to the user.
ROW usdPPPoEProfileRowStatus	1.3.6.1.4.1.4874.2.2.18.1.4.1.1.2	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy The index must exist in the profile manager before this entry can be created. CreateAndGo simply adds a table entry to the PPPoE component. Destroy deletes the entry in the PPPoE component (but not the entry in other components), and removes all PPPoE information relating to this profile.
usdPPPoEProfileTable	1.3.6.1.4.1.4874.2.2.18.1.4.1		not-accessible	This table contains entries for the PPPoE portion of a profile entry.
STR usdPPPoEProfileUrl	1.3.6.1.4.1.4874.2.2.18.1.4.1.1.4	DisplayString	read-create	A URL to be sent via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub-interface. The string entered here can have several substitutions applied: %D is replaced with the profile name %d is replaced with the domain name %u is replaced with the user name %U is replaced with the user/domain name together %% is replaced with the % character The resulting string must not be greater than 127 octets long. The client may use this URL as the initial web-page for the user.
usdPPPoESubIfEntry	1.3.6.1.4.1.4874.2.2.18.1.2.2.1		not-accessible	Each entry describes the characteristics of a PPPoE Subinterface. Creating/deleting entries in this table causes corresponding entries for be created /deleted in ifTable/ifXTable/usdIfTable.
usdPPPoESubIfGroup	1.3.6.1.4.1.4874.2.2.18.4.4.2			Obsolete collection of objects providing management of PPPoE subinterfaces in a Unisphere product. This statement became obsolete when new sub-interface objects were added.
usdPPPoESubIfGroup2	1.3.6.1.4.1.4874.2.2.18.4.4.5			A collection of objects providing management of PPPoE subinterfaces in a Unisphere product.
I32 usdPPPoESubIfId	1.3.6.1.4.1.4874.2.2.18.1.2.2.1.4	Integer32	read-create	An integer identifier for the PPPoE subinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value must be unique among subinterfaces configured on the same underlying PPPoE interface. If this object is not configured, or is configured with a value of -1, a nonzero value will be allocated internally and can be retrieved from this object after table entry creation has succeeded. A value of zero for this object is reserved for future use.
NUM usdPPPoESubIfIndex	1.3.6.1.4.1.4874.2.2.18.1.2.2.1.1	InterfaceIndex	not-accessible	The ifIndex of the PPPoE Subinterface. When creating entries in this table, suitable values for this object are determined by reading usdPPPoESubNextIfIndex.
usdPPPoESubIfLayer	1.3.6.1.4.1.4874.2.2.18.1.2
NUM usdPPPoESubIfLowerIfIndex	1.3.6.1.4.1.4874.2.2.18.1.2.2.1.3	InterfaceIndexOrZero	read-create	The ifIndex of a PPPoE interface over which this PPPoE Subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
STR usdPPPoESubIfMotm	1.3.6.1.4.1.4874.2.2.18.1.2.2.1.6	DisplayString	read-create	A message to send via a PADM on the sub-interface when the sub-interface transitions to the ifOperStatusUp state. The client may choose to display this message to the user.
USD usdPPPoESubIfNextIfIndex	1.3.6.1.4.1.4874.2.2.18.1.2.1	UsdNextIfIndex	read-only	Coordinate ifIndex value allocation for entries in usdPPPoESubIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
ROW usdPPPoESubIfRowStatus	1.3.6.1.4.1.4874.2.2.18.1.2.2.1.2	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdPPPoESubIfRowStatus usdPPPoESubIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for usdPPPoESubIfIndex must have been determined previously, by reading usdPPPoESubIfNextIfIndex. The interface identified by usdPPPoESubIfLowerIfIndex must exist, and must be a PPPoE interface. A positive value configured for usdPPPoESubIfId must not already be assigned to another subinterface layered onto the same underlying PPPoE interface. A corresponding entry in ifTable/ifXTable/usdIfTable is created or destroyed as a result of creating or destroying an entry in this table.
I32 usdPPPoESubIfSessionId	1.3.6.1.4.1.4874.2.2.18.1.2.2.1.5	Integer32	read-only	The current sessionId associated with this sub-interface.
usdPPPoESubIfTable	1.3.6.1.4.1.4874.2.2.18.1.2.2		not-accessible	This table contains entries for PPPoE Subinterfaces present in the system.
STR usdPPPoESubIfUrl	1.3.6.1.4.1.4874.2.2.18.1.2.2.1.7	DisplayString	read-create	A URL to be sent via a PADM on the sub-interface when the sub-interface transitions to the ifOperStatusUp state. The client may use this URL as the initial web-page for the user.
usdPPPoESummary	1.3.6.1.4.1.4874.2.2.18.1.5
usdPPPoESummaryGroup	1.3.6.1.4.1.4874.2.2.18.4.4.6			A collection of objects providing collection of summary statistics on PPPoE interfaces.
I32 usdPPPoESummaryMajorIfAdminDown	1.3.6.1.4.1.4874.2.2.18.1.5.3	Integer32	read-only	The total number of PPPoE major interfaces in the system that are administrateively configued to down(2).
I32 usdPPPoESummaryMajorIfAdminUp	1.3.6.1.4.1.4874.2.2.18.1.5.2	Integer32	read-only	The total number of PPPoE major interfaces in the system that are administratively configured to up(1).
I32 usdPPPoESummaryMajorIfLowerLayerDown	1.3.6.1.4.1.4874.2.2.18.1.5.6	Integer32	read-only	The total number of PPPoE major interfaces in the system with an operational state of lowerLayerDown(7).
I32 usdPPPoESummaryMajorIfNotPresent	1.3.6.1.4.1.4874.2.2.18.1.5.7	Integer32	read-only	The total number of PPPoE major interfaces in the system with an operational state of notPresent(6).
I32 usdPPPoESummaryMajorIfOperDown	1.3.6.1.4.1.4874.2.2.18.1.5.5	Integer32	read-only	The total number of PPPoE major interfaces in the system with an operational state of down(2).
I32 usdPPPoESummaryMajorIfOperUp	1.3.6.1.4.1.4874.2.2.18.1.5.4	Integer32	read-only	The total number of PPPoE major interfaces in the system with an operational state of up(1).
I32 usdPPPoESummarySubIfAdminDown	1.3.6.1.4.1.4874.2.2.18.1.5.10	Integer32	read-only	The total number of PPPoE subinterfaces in the system that are administrateively configued to down(2).
I32 usdPPPoESummarySubIfAdminUp	1.3.6.1.4.1.4874.2.2.18.1.5.9	Integer32	read-only	The total number of PPPoE subinterfaces in the system that are administratively configured to up(1).
I32 usdPPPoESummarySubIfLowerLayerDown	1.3.6.1.4.1.4874.2.2.18.1.5.13	Integer32	read-only	The total number of PPPoE subinterfaces in the system with an operational state of lowerLayerDown(7).
I32 usdPPPoESummarySubIfNotPresent	1.3.6.1.4.1.4874.2.2.18.1.5.14	Integer32	read-only	The total number of PPPoE subinterfaces in the system with an operational state of notPresent(6).
I32 usdPPPoESummarySubIfOperDown	1.3.6.1.4.1.4874.2.2.18.1.5.12	Integer32	read-only	The total number of PPPoE subinterfaces in the system with an operational state of down(2).
I32 usdPPPoESummarySubIfOperUp	1.3.6.1.4.1.4874.2.2.18.1.5.11	Integer32	read-only	The total number of PPPoE subinterfaces in the system with an operational state of up(1).
I32 usdPPPoESummarySubInterfaceCount	1.3.6.1.4.1.4874.2.2.18.1.5.8	Integer32	read-only	The total number of PPPoE subinterfaces configured in the system.

RFC description

MIB for Point-to-Point Protocol over Ethernet (PPPoE) management on Juniper edge routers.

Start monitoring Juniper Networks (Unisphere/ERX) edge routers (PPPoE discovery-stage traffic/error status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Unisphere-Data-PPPOE-MIB