JUNIPER-MOBILE-GATEWAY-AAA-MIB

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › JUNIPER-MOBILE-GATEWAY-AAA-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2011-11-15

Category: RADIUS and AAA, Vendor: Juniper

Description: Provides managed objects for AAA (Authentication, Authorization, and Accounting) on Juniper Networks Mobile Gateway platforms supporting LTE/4G.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is JUNIPER-MOBILE-GATEWAY-AAA-MIB?

JUNIPER-MOBILE-GATEWAY-AAA-MIB covers AAA (Authentication, Authorization, and Accounting) statistics on Juniper's Mobile Gateway/LTE mobile-edge platforms. It exposes authentication request/response counters (accepts, rejects, challenges, timeouts, errors, pending requests) and accounting statistics for mobile-edge AAA services. It is strongly software/service-health oriented—monitoring the operational status of the AAA subsystem itself, such as request timeout counts and response error counts, reveals whether AAA servers are responding correctly or authentication is failing/timing out at scale, akin to monitoring a critical service's health. It is a Juniper enterprise-specific MIB (jnx tree) for Mobile Gateway/LTE platforms, tied to 3GPP mobile-edge AAA concepts rather than a standard IETF MIB. It is typically deployed in mobile operator networks running Juniper Mobile Gateway (LTE/4G packet core) equipment where AAA request volume and error rates need close monitoring. Engineers can download the JUNIPER-MOBILE-GATEWAY-AAA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in JUNIPER-MOBILE-GATEWAY-AAA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Juniper Networks Mobile Gateway / LTE packet-core platforms

Monitoring Examples

An admin would poll jnxMbgTtlAuthRequests alongside jnxMbgTtlAuthAccepts and jnxMbgTtlAuthRejects to compute an authentication success rate, and watch jnxMbgTtlAuthRequestTimeouts and jnxMbgTtlAuthResponseErrors for a spike indicating the AAA server is unreachable or overloaded. jnxMbgTtlAuthPendingRequests would reveal a backlog of unanswered auth requests, and the jnxMbgAAAAcctStatsTable (via jnxMbgAAAAcctStatsEntry) provides parallel accounting statistics, while jnxMbgAAANotifications would fire a trap if these thresholds are breached.

What Can Be Monitored

  • AAA authentication request/accept/reject counts
  • authentication request timeouts
  • AAA response errors
  • pending authentication requests
  • accounting statistics
Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressType
InetPortNumber

From JUNIPER-MIMSTP-MIB

EnabledStatus

From JUNIPER-MOBILE-GATEWAYS

jnxMbgGwIndexOBJECT-TYPE
jnxMbgGwNameOBJECT-TYPE

From JUNIPER-SMI

jnxMobileGatewayMibRootOBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using jnxMbgTtlAuthRequests OID:

Select a Juniper Networks Mobile Gateway / LTE packet-core platform (AAA statistics) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type jnxMbgTtlAuthRequests into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the total authentication requests made. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Vendor-private MIB for Juniper mobile gateway authentication, authorization, and accounting; manages AAA policies and mobile network access control.

Start monitoring Juniper Networks Mobile Gateway / LTE packet-core platform (AAA statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download JUNIPER-MOBILE-GATEWAY-AAA-MIB