All MIBs › CORIANT-GROOVE-MIB › portMode
portMode
Module: CORIANT-GROOVE-MIB
OID (symbolic): CORIANT-GROOVE-MIB::portMode
OID (numeric): 1.3.6.1.4.1.42229.1.2.3.6.1.1.18
Node type: OBJECT-TYPE
Type: CoriantTypesPortMode
Access: read-only
Description: The working mode of port. For client side: CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable. Default is 100GBE when card created.
CHM2: applicable to port 3 to 11; possible values are: 40GBE, subport, not-applicable; applicable to subport 1 to 4; possible values are: 10GBE, not-applicable. Default is not-applicable.
For Line side: CHM1/CHM2: possible values are: QPSK_100G, 16QAM_200G, 8QAM_300G. Default is 16QAM_200G.
non applicable : there shall not be service created on the port or subport subport: the port shall create four subports under the port to support 4x10G. 40GBE: 40GBE service shall be created on the port with default mapping GMP. 10GBE: 10GBE service shall be created on the subport with default mapping BMP with fixed stuff. 100GBE: 100GBE service shall be created on the subport with default mapping GMP. QPSK_100G: 100G OTU4 service with DP-QPSK coherent modulation format shall be created on the port. 16QAM_200G: 200G OTUC2 service with DP-16QAM coherent modulation format shall be created on the port. 8QAM_300G: 300G OTUC3 service with DP-8QAM coherent modulation format shall be created on the coupled two line ports.
Note 4x10G is to create subport managed objects under the port. Each subport can support a 10G service.
Restrictions: Changing Port mode shall be allowed only if the impacted port or subport object is administratively down. Changing a 'subport' port mode of a port to be other value shall only be allowed only if port-modes of all the subports under the port are 'not-applicable'. If there is explicitly cross-connection is created associated with the ODU of the port, change port mode of the port shall be denied. If the port mode is a coupled port mode, e.g. 8QAM_300G, port mode can only be edited on the lower number of port within the coupled ports. The other port (or ports if more than two) will have read-only port mode value same as this lowest number port. When port/subport is set to admin down, laser will be shutdown, ingress side will insert proper maintenance signal.
Conditions:(../port-type != 'optical') and (../port-type != 'otdr') and (../port-type != 'optical-nomon')
default value :not-applicable
What is portMode?
This specifies the working mode of the port, such as which client signal rate, like 100GBE, or line modulation format, like 16QAM-200G, it's configured for, with different valid values depending on whether it's a client-side or line-side port. It's central to service provisioning since it determines what kind of traffic the port can actually carry. For example, an admin turning up a new 200G wavelength on the line side would set this field to 16QAM-200G, while a client port carrying 100 Gigabit Ethernet would be set to 100GBE.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.42229.1.2.3.6.1.1.18 snmpwalk -v2c -c public <target> CORIANT-GROOVE-MIB::portMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.42229.1.2.3.6.1.1.18.1 snmpget -v2c -c public <target> CORIANT-GROOVE-MIB::portMode.1
Start monitoring Coriant Groove optical transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CORIANT-GROOVE-MIB::portMode OID value, configure state conditions and alerts, and monitor any Coriant Groove optical transport platform from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.42229 | coriant | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1 | products | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2 | groove | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.3 | equipment | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.3.6 | port | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.3.6.1 | portTable | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1 | portEntry | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.18 | portMode | CORIANT-GROOVE-MIB |