All MIBs › CORIANT-GROOVE-MIB › lldpRemoteSystemRemoteSysCapEnabled
lldpRemoteSystemRemoteSysCapEnabled
Module: CORIANT-GROOVE-MIB
OID (symbolic): CORIANT-GROOVE-MIB::lldpRemoteSystemRemoteSysCapEnabled
OID (numeric): 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.10
Node type: OBJECT-TYPE
Type: LldpLldpSysCap
Access: read-only
Description: This attribute describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. The bit 'bridge(2)' indicates that the system has bridge capability. The bit 'wlanAccessPoint(3)' indicates that the system has WLAN access point capability. The bit 'router(4)' indicates that the system has router capability. The bit 'telephone(5)' indicates that the system has telephone capability. The bit 'docsisCableDevice(6)' indicates that the system has DOCSIS Cable Device capability (IETF RFC 2669 & 2670). The bit 'stationOnly(7)' indicates that the system has only station capability and nothing else. The bit 'cVLANComponent(8)' indicates that the system has C-VLAN component functionality. The bit 'sVLANComponent(9)' indicates that the system has S-VLAN component functionality. The bit 'twoPortMACRelay(10)' indicates that the system has Two-port MAC Relay (TPMR) functionality.
What is lldpRemoteSystemRemoteSysCapEnabled?
This read-only bitmap reports which of the neighbor's supported system capabilities (repeater, bridge, wlanAccessPoint, router, telephone, etc.) are actually enabled, as opposed to merely supported per lldpRemoteSystemRemoteSysCapSupported. This distinction matters because a device can be capable of routing while that function is administratively disabled, which changes how an operator should expect it to behave on the link. For example, a neighbor that supports the router capability but shows only the bridge bit enabled here is currently operating purely as a switch, not a router, on this connection.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.10 snmpwalk -v2c -c public <target> CORIANT-GROOVE-MIB::lldpRemoteSystemRemoteSysCapEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.10.1 snmpget -v2c -c public <target> CORIANT-GROOVE-MIB::lldpRemoteSystemRemoteSysCapEnabled.1
Start monitoring Coriant Groove optical transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CORIANT-GROOVE-MIB::lldpRemoteSystemRemoteSysCapEnabled OID value, configure state conditions and alerts, and monitor any Coriant Groove optical transport platform from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.42229 | coriant | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1 | products | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2 | groove | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4 | services | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1 | otn | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1.3 | lldpRemoteSystem | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1.3.1 | lldpRemoteSystemTable | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1.3.1.1 | lldpRemoteSystemEntry | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.10 | lldpRemoteSystemRemoteSysCapEnabled | CORIANT-GROOVE-MIB |