All MIBs › CORIANT-GROOVE-MIB › otu2OperStatus
otu2OperStatus
Module: CORIANT-GROOVE-MIB
OID (symbolic): CORIANT-GROOVE-MIB::otu2OperStatus
OID (numeric): 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use.
default value :up
What is otu2OperStatus?
This read-only up/down value reports whether this OTU2 (about 10.7 Gbit/s) line-side OTN facility is actually able to carry service right now, driven internally by the NE's own alarm logic rather than by operator command. Operators trust this over the administrative state to know if the line-side OTN facility itself is healthy. For example, a receive-side fault on the OTU2 facility on slot 5 would drive this object to down even though the administrative state was left at up, flagging an unplanned fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.3 snmpwalk -v2c -c public <target> CORIANT-GROOVE-MIB::otu2OperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.3.1 snmpget -v2c -c public <target> CORIANT-GROOVE-MIB::otu2OperStatus.1
Start monitoring Coriant Groove optical transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CORIANT-GROOVE-MIB::otu2OperStatus OID value, configure state conditions and alerts, and monitor any Coriant Groove optical transport platform from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.42229 | coriant | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1 | products | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2 | groove | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4 | services | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1 | otn | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1.11 | otu2 | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1 | otu2Table | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1 | otu2Entry | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.3 | otu2OperStatus | CORIANT-GROOVE-MIB |