All MIBs › CORIANT-GROOVE-MIB › eth40gOperStatus
eth40gOperStatus
Module: CORIANT-GROOVE-MIB
OID (symbolic): CORIANT-GROOVE-MIB::eth40gOperStatus
OID (numeric): 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use.
default value :up
What is eth40gOperStatus?
This read-only up/down value reports whether this 40 Gigabit Ethernet (40GbE) client port is actually able to carry service right now, driven internally by the NE's own alarm logic rather than by operator command. Operators trust this over the administrative state to know if the client port itself is healthy. For example, a fiber being disconnected from client port 1 would drive this object to down even though the administrative state was left at up, flagging an unplanned fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.7 snmpwalk -v2c -c public <target> CORIANT-GROOVE-MIB::eth40gOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.7.1 snmpget -v2c -c public <target> CORIANT-GROOVE-MIB::eth40gOperStatus.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> eth40gOperStatus.1
Start monitoring Coriant Groove optical transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CORIANT-GROOVE-MIB::eth40gOperStatus OID value, configure state conditions and alerts, and monitor any Coriant Groove optical transport platform from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.42229 | coriant | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1 | products | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2 | groove | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4 | services | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1 | otn | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1.8 | eth40g | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1 | eth40gTable | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1 | eth40gEntry | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.7 | eth40gOperStatus | CORIANT-GROOVE-MIB |