All MIBs › CORIANT-GROOVE-MIB › stm64OperStatus
stm64OperStatus
Module: CORIANT-GROOVE-MIB
OID (symbolic): CORIANT-GROOVE-MIB::stm64OperStatus
OID (numeric): 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use.
default value :up
What is stm64OperStatus?
This read-only INTEGER (up (1) or down (2)) reports whether an STM-64 (10 Gb/s SDH) client port is actually able to carry traffic right now, a state the system derives internally from alarm conditions rather than one the operator sets directly. An administrator watches this value as the definitive real-time health indicator for the facility, since it changes automatically the moment a service-affecting fault is declared or cleared. For example, if a fiber cut causes loss of signal on STM-64, this operational status flips to down immediately, giving the monitoring system a clear, alarm-driven signal that the facility is out of service.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.3 snmpwalk -v2c -c public <target> CORIANT-GROOVE-MIB::stm64OperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.3.1 snmpget -v2c -c public <target> CORIANT-GROOVE-MIB::stm64OperStatus.1
Start monitoring Coriant Groove optical transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CORIANT-GROOVE-MIB::stm64OperStatus OID value, configure state conditions and alerts, and monitor any Coriant Groove optical transport platform from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.42229 | coriant | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1 | products | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2 | groove | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4 | services | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1 | otn | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1.16 | stm64 | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1 | stm64Table | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1 | stm64Entry | CORIANT-GROOVE-MIB |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.3 | stm64OperStatus | CORIANT-GROOVE-MIB |