215 modules from ZTE
ZTE's MIBs in this database split between two device families: ZXROS-based ZXR10 carrier routers/switches and access-node broadband/PON platforms (DSLAMs and OLTs) whose modules carry the ZTE-AN- prefix. Recurring subjects differ by line: the ZXR10 modules cover routing and switching protocol detail (dynamic BGP peering, IPv6 address pools, LLDP, MSTP, private VLANs, VXLAN) plus active-measurement tooling (SQA, TWAMP, ping-based link detection) and TACACS+ authentication, while the access-node modules cover subscriber-facing features like ACL filtering, DHCP snooping, PPPoE diagnostics, CPU-attack defense, and PON ONU provisioning. If you're managing ZTE carrier routers, start with the ZXR10-* modules; if you're managing ZTE broadband access or PON equipment, use the ZTE-AN-* modules instead, since the two prefixes track distinct hardware lines rather than a single unified platform.
| Module | Description |
|---|---|
| CONFIG-COPY-MIB | ZTE ROS router MIB for copying configuration files between running, startup, network (TFTP/FTP), and local file system targets on ZTE ZXR10 routers |
| DPI-MIB | Provides the SNMP Dynamic Program Interface (DPI) for extending SNMP agents with dynamically loaded sub-agents. |
| L2VPN-MIB | L2VPN-MIB module |
| MR-MIB | Manages ZTE multi-service router platform configuration and system status. |
| MR6-MIB | Manages ZTE MR6 series router IPv6 interface and protocol configuration objects. |
| RC-QosPolicy-MIB | Manages QoS policy configuration including class maps, policy maps, and traffic shaping on ZTE network equipment. |
| ROSNG-VPN-PRIVATE-MIB | Manages ZTE ROSNG router VPN instance configuration, route targets, and forwarding tables. |
| ROUTERENV | ZTE Corp environment monitoring MIB for ZTE 128-series advanced routers, managing memory utilization checks, thresholds, and polling intervals via the ZXR10 SMI |
| STACK-MIB | Manages ZTE switch stacking topology, unit roles, inter-unit links, and stack-wide configuration. |
| STACK-TOP | Defines top-level OID registration and SMI structure for ZTE switch stacking management. |
| SWITCHENVIRON | SWITCHENVIRON module |
| SWITCHENVIRONG | SWITCHENVIRONG module |
| UAS-MIB | Manages ZTE UAS (Universal Access Server) configuration, subscriber sessions, and service statistics. |
| ZTE-AN-ACL-MIB | Manages ZTE access node ACL rule configuration, including IP and MAC-based traffic filtering policies. |
| ZTE-AN-ANTI-DOS-MIB | Manages ZTE access node anti-DoS attack protection configuration and monitored attack statistics. |
| ZTE-AN-ARP-MIB | Manages ZTE access node ARP table entries, proxy ARP settings, and ARP security configurations. |
| ZTE-AN-CES-MIB | Manages ZTE access node Circuit Emulation Service configuration for TDM-over-packet transport. |
| ZTE-AN-CFM2-MIB | Manages ZTE access node Connectivity Fault Management (CFM) including MEPs, MAs, and continuity checks. |
| ZTE-AN-CHASSIS-MIB | Monitors ZTE access node chassis hardware including slots, cards, power supplies, and fan status. |
| ZTE-AN-CLOCK-MIB | Manages ZTE access node clock synchronization sources, timing references, and synchronization status. |
| ZTE-AN-DHCP-FILTER-MIB | Manages ZTE access node DHCP message filtering policies to control subscriber DHCP traffic. |
| ZTE-AN-DHCP-L2-RELAY-AGENT-MIB | Manages ZTE access node DHCP Layer 2 relay agent configuration including Option 82 insertion. |
| ZTE-AN-DHCP-SNOOPING-MIB | Manages ZTE access node DHCP snooping, binding database, and untrusted port protection settings. |
| ZTE-AN-DHCP-TEST-MIB | Provides ZTE access node DHCP diagnostic and connectivity test operations for subscriber troubleshooting. |
| ZTE-AN-ENVMON-MIB | Monitors ZTE access node environmental conditions including temperature, voltage, and fan speed thresholds. |
| ZTE-AN-EPON-SERVICE-PRIVATE-MIB | Defines ZTE-proprietary EPON service extensions for advanced ONU service management on ZTE AN platforms. |
| ZTE-AN-ERPS-MIB | Manages ZTE access node Ethernet Ring Protection Switching (ERPS/G.8032) configuration and ring status. |
| ZTE-AN-FILE-MIB | Manages ZTE access node file system operations including file transfer, storage, and software image management. |
| ZTE-AN-GPON-ONUPRF-MIB | Manages ZTE access node GPON ONU RF video overlay configuration and signal level monitoring. |
| ZTE-AN-HIS-PERF-MGMT-MIB | Provides ZTE access node historical performance data collection and retrieval for capacity planning. |
| ZTE-AN-IEEE1588-MIB | Manages ZTE access node IEEE 1588 Precision Time Protocol (PTP) configuration and synchronization status. |
| ZTE-AN-IF-MIB | Manages ZTE access node interface table extensions including physical and logical port configuration. |
| ZTE-AN-IGMP-MIB | Manages ZTE access node IGMP snooping, proxy, and multicast group membership for IPTV services. |
| ZTE-AN-INTERFACE-BASE-MIB | Defines ZTE access node base interface configuration objects shared across all interface types. |
| ZTE-AN-INTERFACE-BRG-PERF-MIB | Monitors ZTE access node bridging interface performance counters for traffic analysis. |
| ZTE-AN-INTERFACE-LOOPBACK-MIB | Manages ZTE access node interface loopback test configuration for physical layer fault diagnosis. |
| ZTE-AN-INTERFACE-STATS-MIB | Provides ZTE access node interface traffic statistics for bandwidth utilization monitoring. |
| ZTE-AN-IPTV-MIB | Manages ZTE access node IPTV service configuration including channel authorization and multicast policies. |
| ZTE-AN-L3-FORWARD-MIB | Manages ZTE access node Layer 3 forwarding table entries and routing configuration for subscriber traffic. |
| ZTE-AN-LI-MIB | Manages ZTE access node Lawful Intercept configuration for regulatory compliance on subscriber ports. |
| ZTE-AN-LOOPBACKDETECT-MIB | Manages ZTE access node loopback detection configuration to identify and isolate forwarding loops. |
| ZTE-AN-LST-MIB | Manages ZTE access node Link State Tracking configuration for uplink/downlink failure propagation. |
| ZTE-AN-MAC-ANTI-SPOOFING-MIB | Covers MAC anti-spoofing security policies on ZTE access nodes, aimed at preventing subscribers from forging MAC addresses. |
| ZTE-AN-MAC-MIB | Manages ZTE access node MAC address table entries, aging timers, and static MAC configurations. |
| ZTE-AN-MDI-MIB | Manages ZTE access node MDI (Medium Dependent Interface) configuration for copper interface tuning. |
| ZTE-AN-MLD-MIB | Manages ZTE access node MLD snooping configuration for IPv6 multicast group management. |
| ZTE-AN-MULTICAST-BASE-MIB | Defines ZTE access node base multicast management objects shared across IGMP and MLD service modules. |
| ZTE-AN-MULTICAST-STATS-MIB | Provides ZTE access node multicast traffic statistics for channel bandwidth and subscriber monitoring. |
| ZTE-AN-OFD-SMI | Defines ZTE access node OFD (OpenFlow Domain) SMI structure for SDN-related management objects. |
| ZTE-AN-OPTICAL-MODULE-MIB | Manages ZTE access node optical transceiver module inventory and configuration parameters. |
| ZTE-AN-OPTICAL-MODULE-PERF-MIB | Monitors ZTE access node optical module performance including Tx/Rx power, temperature, and bias current. |
| ZTE-AN-OTDR-MIB | Manages ZTE access node OTDR (Optical Time Domain Reflectometer) test operations for fiber fault location. |
| ZTE-AN-PON-BASE-MIB | Defines ZTE access node base PON management objects shared across EPON and GPON platform modules. |
| ZTE-AN-PON-PERF-MIB | Monitors ZTE access node PON upstream and downstream performance counters for capacity management. |
| ZTE-AN-PON-PROTECTION-MIB | Manages ZTE access node PON protection switching configuration for optical access redundancy. |
| ZTE-AN-PON-REMOTE-ONU-MIB | Manages ZTE access node remote ONU provisioning and configuration via OMCI or SNMP proxy. |
| ZTE-AN-PON-SERVICE-MIB | Covers PON service provisioning on ZTE access nodes, including T-CONTs, GEM ports, and traffic profiles. |
| ZTE-AN-PON-TC-MIB | Defines ZTE access node PON textual conventions and enumerated types for PON management modules. |
| ZTE-AN-PORT-IDENTIFICATION-MIB | Manages ZTE access node subscriber port identification including circuit ID and remote ID attributes. |
| ZTE-AN-PORT-IDENTIFICATION-PROFILE-MIB | Defines ZTE access node port identification profile templates for subscriber circuit ID generation. |
| ZTE-AN-PPPOE-CONTROL-MIB | Manages ZTE access node PPPoE session control including rate limiting and session count policies. |
| ZTE-AN-PPPOE-INTERMEDIATE-AGENT-MIB | Manages ZTE access node PPPoE Intermediate Agent configuration for subscriber circuit ID insertion. |
| ZTE-AN-PPPOE-SNOOPING-MIB | Manages ZTE access node PPPoE snooping to monitor and control subscriber PPPoE sessions. |
| ZTE-AN-PPPOE-TEST-MIB | Provides ZTE access node PPPoE diagnostic test operations for subscriber connectivity troubleshooting. |
| ZTE-AN-QOS-MIB | Manages ZTE access node QoS policy configuration including queuing, scheduling, and traffic shaping. |
| ZTE-AN-QOS-TRAFFIC-MIB | Monitors ZTE access node QoS traffic statistics per queue and service class for SLA enforcement. |
| ZTE-AN-QOSACL-MIB | Manages ZTE access node QoS ACL rule sets for combined traffic classification and policy enforcement. |
| ZTE-AN-QOSACL-PERF-MIB | Monitors ZTE access node QoS ACL hit counters and performance statistics for policy analysis. |
| ZTE-AN-REMOTE-UNIT-CHANNEL-MIB | Manages ZTE access node remote unit channel configuration for distributed access node architectures. |
| ZTE-AN-REMOTE-UNIT-FILE-MIB | Manages ZTE access node remote unit file operations including software image transfer and activation. |
| ZTE-AN-REMOTE-UNIT-SW-MIB | Manages ZTE access node remote unit software version management and upgrade procedures. |
| ZTE-AN-SECURITY-ANTIATTACK-MIB | Manages ZTE access node anti-attack security policies to protect control plane from flooding attacks. |
| ZTE-AN-SECURITY-CPUDEFEND-MIB | Manages ZTE access node CPU protection policies to rate-limit protocol traffic and defend against DoS. |
| ZTE-AN-SECURITY-INTERFACE-MIB | Manages ZTE access node per-interface security settings including port isolation and trust configurations. |
| ZTE-AN-SECURITY-ISOLATION-MIB | Manages ZTE access node subscriber traffic isolation policies to prevent inter-subscriber communication. |
| ZTE-AN-SECURITY-L3-MIB | Manages ZTE access node Layer 3 security configuration including IP source guard and route filtering. |
| ZTE-AN-SECURITY-PACKET-FILTER-MIB | Manages ZTE access node packet filter rules for subscriber ingress and egress traffic control. |
| ZTE-AN-SERVICE-PORT-MIB | Manages ZTE access node service port configuration mapping subscribers to VLAN and QoS profiles. |
| ZTE-AN-SERVICE-PORT-PERF-MIB | Monitors ZTE access node service port traffic performance counters for subscriber SLA verification. |
| ZTE-AN-SMI | Defines the ZTE access node SMI structure and top-level OID registration for all ZTE-AN MIB modules. |
| ZTE-AN-SOFTWARE-MIB | Manages ZTE access node software image inventory, active version tracking, and upgrade initiation. |
| ZTE-AN-SPAN-MIB | Manages ZTE access node SPAN (Switched Port Analyzer) port mirroring sessions for traffic capture. |
| ZTE-AN-SYS-MGMT-MIB | Manages ZTE access node system-level configuration including NTP, syslog, and administrative settings. |
| ZTE-AN-TC-MIB | Defines ZTE access node textual conventions and base data types shared across ZTE-AN MIB modules. |
| ZTE-AN-UAPS-MIB | Manages ZTE access node UAPS (Unified Authentication Policy Service) subscriber authentication settings. |
| ZTE-AN-VETH-MIB | Manages ZTE access node virtual Ethernet interface configuration for service aggregation. |
| ZTE-AN-VLAN-MIB | Manages ZTE access node VLAN configuration including VLAN creation, port membership, and tagging policies. |
| ZTE-AN-VLAN-STATS-MIB | Monitors ZTE access node per-VLAN traffic statistics for capacity planning and troubleshooting. |
| ZTE-AN-VMAC-MIB | Covers virtual MAC address configuration on ZTE access nodes, supporting redundancy for subscriber service. |
| ZTE-AN-VND-MIB | Manages ZTE access node VND (Virtual Network Domain) configuration for multi-tenant access services. |
| ZTE-UAS-MULTICAST-MIB | Manages ZTE Unified Access System multicast service configuration and subscriber group memberships. |
| ZXR10-AAA-MIB | Manages ZTE ZXR10 router AAA configuration including RADIUS and TACACS+ server settings for user authentication. |
| ZXR10-ACL-MIB | Manages ZTE ZXR10 router ACL rule configuration for IPv4 and IPv6 traffic filtering policies. |
| ZXR10-ACL-NEW-MIB | Manages ZTE ZXR10 router enhanced ACL configuration with extended matching criteria and policy actions. |
| ZXR10-ADM-MGR-MIB | Manages ZTE ZXR10 router administrative domain configuration and management access control settings. |
| ZXR10-ALARM-MIB | Monitors ZTE ZXR10 router active alarms, alarm history, and severity thresholds for fault management. |
| ZXR10-ARP-MIB | Manages ZTE ZXR10 router ARP cache entries, proxy ARP configuration, and ARP security settings. |
| ZXR10-BFD-MIB | Manages ZTE ZXR10 router BFD session configuration and monitors link failure detection status. |
| ZXR10-BGP-DYN-MIB | Covers dynamic BGP peer configuration on ZTE ZXR10 routers, supporting automation of large-scale peering. |
| ZXR10-BGP-POLICY-ACCOUNTING-MIB | Monitors ZTE ZXR10 router BGP policy accounting statistics for traffic engineering and billing. |
| ZXR10-CDP-COMPLIANCE-MIB | Manages ZTE ZXR10 router CDP compliance settings for neighbor discovery protocol interoperability. |
| ZXR10-CLI-MIB | Manages ZTE ZXR10 router CLI access configuration and monitors command execution activity. |
| ZXR10-CLI-SYSTEM-MIB | Manages ZTE ZXR10 router CLI system-level settings including command authorization and logging. |
| ZXR10-CLI-TIME-MIB | Manages ZTE ZXR10 router CLI time-based access restrictions and scheduled command execution. |
| ZXR10-CONFIG-COPY-MIB | Manages ZTE ZXR10 router configuration file copy operations between running, startup, and remote storage. |
| ZXR10-CONFIG-MAN-MIB | Covers configuration management on ZTE ZXR10 routers, including save, rollback, and version history operations. |
| ZXR10-DHCP-RELAY-SERVER-MIB | Manages ZTE ZXR10 router DHCP relay agent configuration and server address pool assignments. |
| ZXR10-EFM-MIB | Manages ZTE ZXR10 router Ethernet in the First Mile (EFM/802.3ah) OAM configuration and link monitoring. |
| ZXR10-ETH-MGT-MIB | Manages ZTE ZXR10 router Ethernet interface management including speed, duplex, and flow control settings. |
| ZXR10-FILE-SYSTEM-MIB | Covers file system operations on ZTE ZXR10 routers, including storage capacity tracking and file transfer management. |
| ZXR10-GARP-MIB | Manages ZTE ZXR10 router GARP and GVRP protocol configuration for dynamic VLAN membership propagation. |
| ZXR10-HAGP-MIB | Covers HAGP (High Availability Gateway Protocol) on ZTE ZXR10 routers, including configuration and failover status. |
| ZXR10-HQOS-MIB | Manages ZTE ZXR10 router hierarchical QoS policy configuration for multi-level traffic scheduling. |
| ZXR10-IF-FREE-DEPLOY-MIB | Manages ZTE ZXR10 router interface-free deployment configuration for flexible service provisioning. |
| ZXR10-IF-QOS-MIB | Defines ZTE ZXR10 interface QoS policy parameters including traffic shaping, queuing, and scheduling configuration per interface. |
| ZXR10-IF-STAT-MIB | Provides ZTE ZXR10 per-interface traffic statistics including packet and byte counters for ingress and egress flows. |
| ZXR10-IF-TABLE-MIB | Defines ZTE ZXR10 interface table entries with physical and logical port attributes, status, and configuration parameters. |
| ZXR10-IGMP-PIM-SNOOPING-MIB | Manages ZTE ZXR10 IGMP and PIM snooping for multicast group membership control on Layer 2 switching domains. |
| ZXR10-IP-IF-MIB | Defines ZTE ZXR10 IP interface configuration including address assignment, MTU, and Layer 3 interface properties. |
| ZXR10-IP-SOURCE-GUARD-MIB | Manages ZTE ZXR10 IP Source Guard bindings to prevent IP spoofing by validating source addresses on switch ports. |
| ZXR10-IP-STATIC-ROUTE-MIB | Defines ZTE ZXR10 static IPv4 route table entries including destination, next-hop, metric, and administrative distance. |
| ZXR10-IPFLOW-MIB | Monitors ZTE ZXR10 IP flow statistics and NetFlow-style traffic records for network traffic analysis. |
| ZXR10-IPV6-POOL-MIB | Defines ZTE ZXR10 IPv6 address pool configuration for dynamic address allocation and prefix delegation. |
| ZXR10-L2PT-MIB | Defines ZTE ZXR10 Layer 2 Protocol Tunneling configuration for transparently transporting L2 PDUs across networks. |
| ZXR10-L2TP-MIB | Manages ZTE ZXR10 L2TP tunnel and session parameters for PPP encapsulation over IP networks. |
| ZXR10-L2VPN-MIB | Defines ZTE ZXR10 Layer 2 VPN service configuration including pseudowire and VPLS instance parameters. |
| ZXR10-L2VPN-STAT-MIB | Provides ZTE ZXR10 L2VPN service traffic statistics including packet and byte counters per pseudowire. |
| ZXR10-L3VPN-STAT-MIB | Provides ZTE ZXR10 Layer 3 VPN traffic statistics including per-VRF packet and byte counters. |
| ZXR10-LACP | Defines ZTE ZXR10 Link Aggregation Control Protocol (LACP) configuration for IEEE 802.3ad port bundling. |
| ZXR10-LACP-MIB | Manages ZTE ZXR10 LACP aggregation groups, actor and partner state, and port aggregation status. |
| ZXR10-LLDP-MIB | Manages ZTE ZXR10 LLDP neighbor discovery, port descriptions, and device topology information exchange. |
| ZXR10-LOG-MIB | Defines system logging settings for ZTE ZXR10 devices, including log level, buffer settings, and output destinations. |
| ZXR10-LSP-MAN-MIB | Manages ZTE ZXR10 MPLS LSP provisioning, status, and label forwarding entry administration. |
| ZXR10-LSP-PING-MIB | Defines ZTE ZXR10 LSP ping operations for MPLS path connectivity verification and fault isolation. |
| ZXR10-MAC-MIB | Manages ZTE ZXR10 MAC address table entries, aging timers, and static MAC address configuration. |
| ZXR10-MAC-PING-MIB | Defines ZTE ZXR10 MAC ping operations for Layer 2 connectivity testing between MAC endpoints. |
| ZXR10-MC-ELAM-MIB | Manages ZTE ZXR10 multicast embedded logic analyzer module for hardware-level multicast packet diagnosis. |
| ZXR10-MC-MONITOR-MIB | Monitors ZTE ZXR10 multicast forwarding state, group membership, and multicast traffic flow statistics. |
| ZXR10-MFF-MIB | Defines ZTE ZXR10 MAC Forced Forwarding configuration for subscriber isolation and gateway redirection. |
| ZXR10-MLD-SNOOPING-MIB | Manages ZTE ZXR10 MLD snooping for IPv6 multicast group membership control on Layer 2 switch domains. |
| ZXR10-MPLS-ICCP-MIB | Defines ZTE ZXR10 MPLS Inter-Chassis Communication Protocol for multi-chassis redundancy coordination. |
| ZXR10-MPLS-L2VPN | Manages ZTE ZXR10 MPLS-based Layer 2 VPN services including pseudowire and VPLS configuration. |
| ZXR10-MPLS-L2VPN-STATIS | Provides ZTE ZXR10 MPLS L2VPN traffic statistics including throughput and packet counters per service. |
| ZXR10-MPLS-L3VPN-STATIS | Provides ZTE ZXR10 MPLS L3VPN traffic statistics including per-VRF forwarding counters and performance data. |
| ZXR10-MPLS-OAM-MIB | Defines ZTE ZXR10 MPLS OAM tools for LSP fault detection, performance monitoring, and protection switching. |
| ZXR10-MPPP-MIB | Manages ZTE ZXR10 Multi-link PPP bundle configuration, member links, and aggregated channel statistics. |
| ZXR10-MSTATIC-MIB | Defines ZTE ZXR10 static multicast route entries for manually configured multicast forwarding paths. |
| ZXR10-MSTP | Manages ZTE ZXR10 Multiple Spanning Tree Protocol instances, port roles, and topology change notifications. |
| ZXR10-MSTP-MIB | Defines ZTE ZXR10 MSTP configuration including region name, revision, instance-to-VLAN mapping, and port state. |
| ZXR10-NTP-MIB | Manages ZTE ZXR10 NTP server associations, synchronization status, stratum level, and clock offset. |
| ZXR10-OPTICAL-ALARM-MIB | Monitors ZTE ZXR10 optical interface alarms including loss of signal, power levels, and optical module faults. |
| ZXR10-P2MP-TE-MIB | Defines ZTE ZXR10 Point-to-Multipoint MPLS TE tunnel configuration for multicast traffic engineering. |
| ZXR10-PBR-MIB | Manages ZTE ZXR10 Policy-Based Routing rules, route maps, and next-hop policy configuration. |
| ZXR10-PEB-MIB | Defines ZTE ZXR10 Provider Edge Bridge configuration for IEEE 802.1ad Q-in-Q VLAN stacking services. |
| ZXR10-PERFORMANCE-MIB | Monitors ZTE ZXR10 system performance metrics including CPU, memory utilization, and throughput statistics. |
| ZXR10-PING-DETECT-MIB | Defines ZTE ZXR10 ping-based link detection for monitoring reachability and triggering failover actions. |
| ZXR10-PORT-GROUP-MIB | Defines ZTE ZXR10 port group configuration for applying shared policies and attributes to sets of ports. |
| ZXR10-PORTACL-MIB | Manages ZTE ZXR10 port-level access control lists for Layer 2 and Layer 3 traffic filtering on switch ports. |
| ZXR10-POS-MGT-MIB | Manages ZTE ZXR10 Packet over SONET/SDH interface configuration, framing, and performance monitoring. |
| ZXR10-PROJECT-MIB | Defines ZTE ZXR10 project-level MIB providing device identity, project versioning, and platform baseline objects. |
| ZXR10-PROPAGATE-MIB | Manages ZTE ZXR10 route propagation policies controlling redistribution between routing protocol domains. |
| ZXR10-PROTOCOL-ROUTERS-MIB | Covers routing protocol instances on ZTE ZXR10 routers, including OSPF, IS-IS, and BGP process configuration. |
| ZXR10-PTP-MIB | Manages ZTE ZXR10 Precision Time Protocol (IEEE 1588) clock configuration, port state, and synchronization status. |
| ZXR10-PVLAN-MIB | Defines ZTE ZXR10 Private VLAN configuration for subscriber isolation using primary and secondary VLAN pairs. |
| ZXR10-QOS-CAR-MIB | Manages ZTE ZXR10 QoS Committed Access Rate (CAR) policies for ingress and egress bandwidth limiting. |
| ZXR10-QOS-DS-MIB | Defines Differentiated Services QoS settings for ZTE ZXR10 equipment, including DSCP mapping and per-hop behavior. |
| ZXR10-QOS-STAT-MIB | Provides ZTE ZXR10 QoS policy statistics including queue depths, drop counters, and traffic class throughput. |
| ZXR10-RACK-MIB | Monitors ZTE ZXR10 chassis rack configuration, slot occupancy, card presence, and physical inventory. |
| ZXR10-RADIUS-MIB | Manages ZTE ZXR10 RADIUS authentication and accounting server configuration, retry settings, and statistics. |
| ZXR10-ROUTE-LABEL-MIB | Defines ZTE ZXR10 route-to-label binding information for MPLS forwarding equivalence class management. |
| ZXR10-ROUTE-MAP-MIB | Manages ZTE ZXR10 route map policy definitions including match conditions and set actions for routing policy. |
| ZXR10-RTM-L2VPN | Defines ZTE ZXR10 Route Table Manager objects for L2VPN service route tracking and forwarding table management. |
| ZXR10-RTM-MIB | Manages ZTE ZXR10 Route Table Manager for unified routing table maintenance across multiple protocol instances. |
| ZXR10-SAMGR-MIB | Defines ZTE ZXR10 Service Activation Manager configuration for provisioning network service parameters. |
| ZXR10-SECTION-MIB | Manages ZTE ZXR10 transport section-layer configuration and performance monitoring for SDH/SONET interfaces. |
| ZXR10-SMI | Defines the ZTE ZXR10 Structure of Management Information providing the enterprise OID tree root and module naming. |
| ZXR10-SNMP-ERR-CODE-MIB | Defines ZTE ZXR10 SNMP error code mappings for vendor-specific error conditions and diagnostic status values. |
| ZXR10-SNMP-MIB | Manages ZTE ZXR10 SNMP agent configuration including community strings, access control, and agent parameters. |
| ZXR10-SNMP-SECURITY-MIB | Defines ZTE ZXR10 SNMPv3 security configuration including USM user accounts, authentication, and privacy settings. |
| ZXR10-SNMP-TRAPMAG-MIB | Covers SNMP trap manager settings on ZTE ZXR10 equipment, including trap destination, version, and notification filtering. |
| ZXR10-SQA-MIB | Defines ZTE ZXR10 Service Quality Analyzer test operations for active network performance measurement. |
| ZXR10-SSH-MIB | Manages ZTE ZXR10 SSH server configuration including authentication methods, host keys, and active session monitoring. |
| ZXR10-SSM-MIB | Manages ZTE ZXR10 Source-Specific Multicast configuration for IGMPv3 and PIM-SSM group source filtering. |
| ZXR10-SUPERVLAN-MIB | Defines ZTE ZXR10 Super VLAN aggregation configuration for subscriber VLAN aggregation and IP sharing. |
| ZXR10-SWITCH-VLAN-MIB | Manages ZTE ZXR10 VLAN database configuration, port VLAN membership, and 802.1Q tagging parameters. |
| ZXR10-SYSLOG-SERVER-MIB | Manages ZTE ZXR10 remote syslog server configuration including target addresses, facility, severity filtering. |
| ZXR10-SYSTEM-CONFIG-MIB | Defines ZTE ZXR10 system-level configuration objects including hostname, management interfaces, and startup config. |
| ZXR10-SYSTEM-HARDWARE-MIB | Monitors ZTE ZXR10 hardware inventory including chassis, cards, fans, power supplies, and component status. |
| ZXR10-SYSTEM-SOFTWARE-MIB | Manages ZTE ZXR10 software version information, image files, and firmware upgrade operation status. |
| ZXR10-TACPLUS-MIB | Manages ZTE ZXR10 TACACS+ server configuration for centralized device administration authentication and accounting. |
| ZXR10-TCP-MIB | Monitors ZTE ZXR10 TCP connection table, state, endpoints, and transport-layer performance statistics. |
| ZXR10-TELNET-MIB | Manages ZTE ZXR10 Telnet server configuration, active session management, and access control settings. |
| ZXR10-TIME-RANGE-MIB | Defines ZTE ZXR10 time-range policy objects for scheduling ACL and QoS rules by time of day or week. |
| ZXR10-TRACE-MIB | Defines ZTE ZXR10 traceroute diagnostic operations for hop-by-hop path discovery and latency measurement. |
| ZXR10-TRILL-COMMON-MIB | Manages ZTE ZXR10 TRILL protocol common objects including RBridge identification and topology state. |
| ZXR10-TRILL-ISIS-MIB | Defines ZTE ZXR10 TRILL IS-IS control plane objects for RBridge link-state routing and nickname assignment. |
| ZXR10-TUNNEL-GROUP-MIB | Manages ZTE ZXR10 tunnel group configuration for logical grouping of GRE, MPLS, or IPsec tunnels. |
| ZXR10-TWAMP-MIB | Defines ZTE ZXR10 TWAMP test sessions for two-way active measurement of IP network delay and packet loss. |
| ZXR10-UDLD-MIB | Manages ZTE ZXR10 Unidirectional Link Detection for identifying and disabling one-way Ethernet link failures. |
| ZXR10-URPF-MIB | Manages ZTE ZXR10 Unicast Reverse Path Forwarding configuration for source address anti-spoofing validation. |
| ZXR10-VLAN-TRANS-MIB | Defines ZTE ZXR10 VLAN translation rules for mapping customer VLAN IDs to service VLAN IDs at network edges. |
| ZXR10-VLANATT-MIB | Manages ZTE ZXR10 VLAN attribute configuration including protocol-based VLAN assignment and attribute policies. |
| ZXR10-VND-MIB | Defines ZTE ZXR10 Virtual Network Domain configuration for logical network segmentation and tenant isolation. |
| ZXR10-VRF-MIB | Manages ZTE ZXR10 VRF instance configuration including route distinguisher, import/export targets, and interface binding. |
| ZXR10-VRF-ROUTERS-MIB | Defines ZTE ZXR10 routing protocol instances within VRF contexts for per-tenant routing process management. |
| ZXR10-VRRP-EXT-MIB | Manages ZTE ZXR10 VRRP extended objects including virtual router priority, preemption, and failover tracking. |
| ZXR10-VXLAN-MIB | Manages ZTE ZXR10 VXLAN overlay network configuration including VNI mapping, tunnel endpoints, and flood tables. |
| ZXR10OPTICALMIB | Monitors ZTE ZXR10 optical transceiver parameters including transmit/receive power, temperature, and module status. |
| ZXROSNG-L2L3VPN-BRIDGE-MIB | Defines ZTE ZXROSNG L2/L3 VPN bridge configuration for integrated Layer 2 and Layer 3 VPN service delivery. |
| ZXROSNG-L2VPN-MIB | Manages ZTE ZXROSNG next-generation L2VPN service instances, pseudowires, and VPLS forwarding configuration. |
| ZXROSNG-MAC-MIB | Manages ZTE ZXROSNG MAC address tables, static MAC entries, and Layer 2 forwarding database management. |
| ZXROSNG-MPLS-TE-MIB | Manages ZTE ZXROSNG MPLS Traffic Engineering tunnels, RSVP-TE LSP attributes, and bandwidth allocation. |
| ZXROSNG-PROTECT-GROUP-MIB | Defines ZTE ZXROSNG protection group configuration for linear and ring APS switching and failover. |
| ZXROSNG-TPAPS-MIB | Manages ZTE ZXROSNG Transport Profile Automatic Protection Switching for G.8031/G.8032 Ethernet ring protection. |
| ZXROSNG-TPOAM-MIB | Defines ZTE ZXROSNG Transport Profile OAM configuration for Y.1731 performance monitoring and fault management. |