ZTE-AN-REMOTE-UNIT-FILE-MIB

All MIBs › ZTE-AN-REMOTE-UNIT-FILE-MIB

Organization: ZTE Corporation

Last Updated: 2014-12-18

Category: ZTE Access Node (ZTE-AN) Management

Description: Manages ZTE access node remote unit file operations including software image transfer and activation.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-AN-REMOTE-UNIT-FILE-MIB?

This is a ZTE vendor-specific MIB for the Access Node (AN) product line, covering file management operations on remote units — the distributed cabinet or curb-side access devices in a ZTE AN deployment. It exposes objects related to software/firmware file transfer, storage, and activation on these remote units, rather than traffic or environmental data. Its central monitoring and management value is tracking software version and upgrade status on remote hardware: administrators can confirm which firmware image is currently active on a remote unit, whether a file transfer is in progress, and whether an activation succeeded or failed, which is critical for fleet-wide firmware consistency and troubleshooting remote-unit malfunctions tied to outdated or corrupted software. It relies on the broader ZTE AN remote-unit management framework, working in tandem with remote-unit channel and status MIBs to identify which unit a file operation applies to. It is typically deployed by telecom operators performing remote firmware upgrades across distributed access node deployments in FTTx networks, where the ZTE-AN-REMOTE-UNIT-FILE-MIB MIB is loaded into their monitoring systems to track these operations.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-REMOTE-UNIT-FILE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE access node remote unit (distributed cabinet/curb unit)

Monitoring Examples

An operator initiates a firmware upgrade on a remote unit by triggering a file transfer object and then polls the transfer status object to confirm the image was downloaded successfully before activating it. If a remote unit reports a persistent 'transfer failed' or version-mismatch state after an upgrade attempt, it points to a corrupted image or connectivity issue with that specific unit rather than a network-wide problem. No sample objects were present in the source extract, so exact object names cannot be confirmed here.

What Can Be Monitored

firmware/software file transfer status
active software version
file activation result
remote unit file storage state

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus

From ZTE-AN-SMI

zxAnSystem

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxAnRemoteUnitFileMib	1.3.6.1.4.1.3902.1082.20.42			The MIB module for the file management of remote unit.
zxAnRuFileGlobalObjects	1.3.6.1.4.1.3902.1082.20.42.1
BIT zxAnRuConfigFileCapabilities	1.3.6.1.4.1.3902.1082.20.42.1.1	Bits	read-only	The management capabilities of remote unit configuration file updating. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means that the remote unit configuration file updating supports SD card. NOTE: No recommended to display it in NMS.
zxAnRuFileObjects	1.3.6.1.4.1.3902.1082.20.42.2
zxAnRuConfigFileObjects	1.3.6.1.4.1.3902.1082.20.42.2.1
zxAnRuCfManualUpdatingObjects	1.3.6.1.4.1.3902.1082.20.42.2.1.1
OCT zxAnRuCfManualUpdatingList	1.3.6.1.4.1.3902.1082.20.42.2.1.1.1	OCTET STRING	read-write	The list of remote units, each remote unit consists of 'ifIndex'.
INT zxAnRuCfManualUpdatingOperAction	1.3.6.1.4.1.3902.1082.20.42.2.1.1.2	INTEGER	read-write	The configuration file operating action. Actions are defined as follows: 1 update all configuration files of remote unit 2 delete a configuration file from remote unit
I32 zxAnRuCfManualUpdatingFileTypeId	1.3.6.1.4.1.3902.1082.20.42.2.1.1.3	Integer32	read-write	The configuration file type ID. The attribute is only valid when zxAnRuCfManualUpdatingOperAction equals 'delete(2)'.
zxAnRuConfigFileUpdateTable	1.3.6.1.4.1.3902.1082.20.42.2.1.2		not-accessible	Remote unit configuration file updating table.
zxAnRuConfigFileUpdateEntry	1.3.6.1.4.1.3902.1082.20.42.2.1.2.1		not-accessible	Remote unit configuration file updating entry.
I32 zxAnRuFileRack	1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.1	Integer32	not-accessible	The rack No. of OLT.
I32 zxAnRuFileShelf	1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.2	Integer32	not-accessible	The shelf No. of OLT.
I32 zxAnRuFileSlot	1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.3	Integer32	not-accessible	The slot No. of OLT.
I32 zxAnRuFilePort	1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.4	Integer32	not-accessible	The PON port No. of OLT.
INT zxAnRuConfigFileUpdateInstIndex	1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.5	INTEGER	not-accessible	The No. of each instance.
OCT zxAnRuConfigFileUpdateOnuList	1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.6	OCTET STRING	read-create	The remote unit list in a PON port. The use of 32-octet specifies 256 ONUs. Each octet within this field specifies a set of eight ONUs, with the first octet specifying ONU 1 through 8, the second octet specifying ONU 9 through 16, etc. If a bit has a value of 1, it indicates the ONU is specified, and the default bit value is 0. The bit position values are: bit0: ONU 1 bit1: ONU 2 ... bit255: ONU 256.
STR zxAnRuConfigFileUpdateFileName	1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.7	DisplayString	read-create	The configuration file name, and .XML file is supported. The file name of each instance cannot be duplicated.
I32 zxAnRuConfigFileUpdateFileTypeId	1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.8	Integer32	read-create	The configuration file type ID. The attribute is only valid for GPON, different service requirements of user will use different file type ID. The value '0' indicates the attribute is invalid.
INT zxAnRuConfigFileUpdateActiveMode	1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.9	INTEGER	read-create	The configuration file activation mode. The attribute is only valid for GPON VoIP service.
INT zxAnRuConfigFileUpdateFLocation	1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.10	INTEGER	read-create	The configuration file location. Location type is defined as following: 1: file comes from flash. 3: file comes from SD card.
I32 zxAnRuConfigFileUpdateStorageDId	1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.11	Integer32	read-create	The ID of the storage device. The numbering rule is: When zxAnRuConfigFileUpdateFLocation is flash(1), the value is 1 and it indicates flash 1. When zxAnRuConfigFileUpdateFLocation is sdCard(3), the value is 2 and it indicates SD card 1. ...
ROW zxAnRuConfigFileUpdateRowStatus	1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnRuConfigFileUpdateEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnRuCfUpdatingStatusTable	1.3.6.1.4.1.3902.1082.20.42.2.1.3		not-accessible	Remote unit configuration file updating status information table. Each item in this table records the updating result of remote unit configruation file last time.
zxAnRuCfUpdatingStatusEntry	1.3.6.1.4.1.3902.1082.20.42.2.1.3.1		not-accessible	Remote unit configuration file updating status information entry.
I32 zxAnRuCfOnu	1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.1	Integer32	not-accessible	The ONU number.
I32 zxAnRuCfUpdatingStatusFileTypeId	1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.2	Integer32	not-accessible	The configuration file type ID. The attribute is only valid for GPON, different service requirements of user will use different file type ID. The value '0' indicates the attribute is invalid.
STR zxAnRuCfUpdatingStatusFileName	1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.3	DisplayString	read-only	The configuration file name. Null string indicates the attribute is invalid.
INT zxAnRuCfUpdatingStatusActiveMode	1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.4	INTEGER	read-only	The configuration file activation mode. The attribute is only valid for GPON VoIP service, and for other type configuration file, this attribute value is unconditional.
INT zxAnRuCfUpdatingStatusResult	1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.5	INTEGER	read-only	The result status of updating configruation file.
INT zxAnRuCfUpdatingStatusFailReason	1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.6	INTEGER	read-only	The failure reason of updating configruation file.
INT zxAnRuCfUpdatingStatusProgress	1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.7	INTEGER	read-only	The percent of updating configruation file.
INT zxAnRuCfUpdatingStatusFLocation	1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.8	INTEGER	read-only	The configuration file location. Location type is defined as following: 1: file comes from flash. 3: file comes from SD card.
zxAnRuConfigFile2Objects	1.3.6.1.4.1.3902.1082.20.42.2.2
zxAnRuConfFile2UpdateTable	1.3.6.1.4.1.3902.1082.20.42.2.2.2		not-accessible	Remote unit configuration file updating table. Update the ONU configuration file with standard defined procedure or private defined procedure.
zxAnRuConfFile2UpdateEntry	1.3.6.1.4.1.3902.1082.20.42.2.2.2.1		not-accessible	Remote unit configuration file updating entry. Update the ONU configuration file with standard defined procedure or private defined procedure
I32 zxAnRuConfFile2UpdtRack	1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.1	Integer32	not-accessible	The rack No. of OLT.
I32 zxAnRuConfFile2UpdtShelf	1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.2	Integer32	not-accessible	The shelf No. of OLT.
I32 zxAnRuConfFile2UpdtSlot	1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.3	Integer32	not-accessible	The slot No. of OLT.
I32 zxAnRuConfFile2UpdtPort	1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.4	Integer32	not-accessible	The PON port No. of OLT.
I32 zxAnRuConfFile2UpdtOnu	1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.5	Integer32	not-accessible	The ONU No.
I32 zxAnRuConfFile2UpdtFileTypeId	1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.6	Integer32	not-accessible	The configuration file type ID. The attribute is only valid for GPON, different service requirements of user will use different file type ID. The value '0' indicates that it is a private defined procedure.
STR zxAnRuConfFile2UpdtFileName	1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.7	DisplayString	read-create	The configuration file name.
INT zxAnRuConfFile2UpdtActMode	1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.8	INTEGER	read-create	The configuration file activation mode. The value 1-3 is only valid for GPON VoIP service.
ROW zxAnRuConfFile2UpdtRowStatus	1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnRuConfigFileUpdateEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnRuConfFile2UpdateStatusTable	1.3.6.1.4.1.3902.1082.20.42.2.2.3		not-accessible	Remote unit configuration file updating status table. Each item in this table records the updating result of remote unit configruation file last time.
zxAnRuConfFile2UpdateStatusEntry	1.3.6.1.4.1.3902.1082.20.42.2.2.3.1		not-accessible	Remote unit configuration file updating status entry.
STR zxAnRuConfFile2UpdtStatFileName	1.3.6.1.4.1.3902.1082.20.42.2.2.3.1.1	DisplayString	read-only	The configuration file name.
INT zxAnRuConfFile2UpdtStatActMode	1.3.6.1.4.1.3902.1082.20.42.2.2.3.1.2	INTEGER	read-only	The configuration file activation mode. The value 1-3 is only valid for GPON VoIP service.
INT zxAnRuConfFile2UpdtStatStatus	1.3.6.1.4.1.3902.1082.20.42.2.2.3.1.3	INTEGER	read-only	The status of updating configuration file.
INT zxAnRuConfFile2UpdtStatFailRsn	1.3.6.1.4.1.3902.1082.20.42.2.2.3.1.4	INTEGER	read-only	The failed reason of updating configuration file.
INT zxAnRuConfFile2UpdtStatProgress	1.3.6.1.4.1.3902.1082.20.42.2.2.3.1.5	INTEGER	read-only	The progress of updating configuration file.
zxAnRuFileConformance	1.3.6.1.4.1.3902.1082.20.42.4
zxAnRuFileCompliances	1.3.6.1.4.1.3902.1082.20.42.4.1
zxAnRuFileCompliance	1.3.6.1.4.1.3902.1082.20.42.4.1.1			The compliance statement for SNMP entities which implement the ZTE-AN-REMOTE-UNIT-FILE-MIB.
zxAnRuFileGroups	1.3.6.1.4.1.3902.1082.20.42.4.2
zxAnRuFileUpdateGroup	1.3.6.1.4.1.3902.1082.20.42.4.2.1			The collection of objects which are used to configure remote unit configuration file updating management. It will keep the remote unit always running with this configuration file.

RFC description

Vendor-specific MIB for remote unit file and configuration management in ZTE APON network equipment.

Start monitoring ZTE access node remote unit (distributed cabinet/curb unit) (firmware-file-transfer/activation status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-AN-REMOTE-UNIT-FILE-MIB

What Is ZTE-AN-REMOTE-UNIT-FILE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description