ZTE-AN-SYS-MGMT-MIB

All MIBs › ZTE-AN-SYS-MGMT-MIB

Organization: ZTE Corporation

Last Updated: 2014-06-04

Category: ZTE Access Node (ZTE-AN) Management

Description: Manages ZTE access node system-level configuration including NTP, syslog, and administrative settings.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-AN-SYS-MGMT-MIB?

ZTE-AN-SYS-MGMT-MIB is a ZTE proprietary system-management MIB for its Access Node broadband platforms, covering general device administration such as NTP time synchronization, syslog output configuration, and other administrative settings. It exposes configuration data for how the device manages its clock, logging destinations, and administrative access rather than traffic-forwarding statistics. This MIB is directly useful for monitoring core software status of the device: whether NTP synchronization is functioning (affecting timestamp accuracy across all other logs and traps), where syslog messages are being sent, and general administrative configuration health. It likely complements other ZTE-AN MIBs by providing the system-level context (time, logging) needed to interpret events reported elsewhere. It is typically deployed on ZTE access nodes in service-provider access networks where centralized time sync and remote logging are required for operations. Engineers can download the ZTE-AN-SYS-MGMT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-SYS-MGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE Access Node (DSLAM/OLT broadband access device)

Monitoring Examples

No specific object names were captured for this MIB, so an exact polling example cannot be honestly given; in practice an operator would poll the NTP synchronization state and syslog server configuration objects to confirm the device clock is synced and logs are being forwarded, noticing an issue if NTP shows unsynchronized or the syslog destination is unreachable.

What Can Be Monitored

NTP synchronization status
syslog server configuration
system administrative settings
logging output destination

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress

From ZTE-AN-SMI

zxAnSystem

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxAnSysMgmtMib	1.3.6.1.4.1.3902.1082.20.1			This MIB defines managed objects of zte system management.
zxAnSysMgmtObjects	1.3.6.1.4.1.3902.1082.20.1.2
zxAnSysConfigSaveObjects	1.3.6.1.4.1.3902.1082.20.1.2.10
zxAnSysConfigSaveGlobalObjects	1.3.6.1.4.1.3902.1082.20.1.2.10.1
INT zxAnSysConfigSavingAction	1.3.6.1.4.1.3902.1082.20.1.2.10.1.1	INTEGER	read-write	Save device configuration data to flash media. The configuration information is saved to startrun.dat.
zxAnSysConfigAutoSaveObjects	1.3.6.1.4.1.3902.1082.20.1.2.10.1.2
INT zxAnSysConfigAutoSaveMode	1.3.6.1.4.1.3902.1082.20.1.2.10.1.2.2	INTEGER	read-write	Automatic saving flash mode.
STR zxAnSysConfigAutoSaveDailyTime	1.3.6.1.4.1.3902.1082.20.1.2.10.1.2.4	DisplayString	read-write	The time of automatic saving flash daily. For example:HH:MM:SS.(02:22:33). This variable is valid if zxAnSysConfigAutoSaveMode is set to daily(2).
DAT zxAnSysConfigAutoSaveOnceTime	1.3.6.1.4.1.3902.1082.20.1.2.10.1.2.5	DateAndTime	read-write	The time of automatic saving flash once. This variable is valid if zxAnSysConfigAutoSaveMode is set to once(3). The default time is 2000-01-01 00:00:00.
I32 zxAnSysConfigAutoSaveHoldOffTime	1.3.6.1.4.1.3902.1082.20.1.2.10.1.2.6	Integer32	read-write	The hold off time of automatic saving flash when configuration data is changed. This variable is valid if zxAnSysConfigAutoSaveMode is set to configChanged(4)
INT zxAnSysConfigSaveStatus	1.3.6.1.4.1.3902.1082.20.1.2.10.1.3	INTEGER	read-only	The status of save flash operation. - success(1): The save flash operation is completed. - failed(2): The save flash operation is failed. - saving(3): The save flash is still in progress. - noOperation(4): No operation is executed.
I32 zxAnSysConfigSaveProgress	1.3.6.1.4.1.3902.1082.20.1.2.10.1.4	Integer32	read-only	The percentage of the progess when saving flash is executed .
INT zxAnSysConfigSaveFailedReason	1.3.6.1.4.1.3902.1082.20.1.2.10.1.5	INTEGER	read-only	The reason of saving flash operation failed. Possible values are: - noError(1): No error, saving flash successfully or no saving flash operation is excuted. - flashMediaFull(2): The save flash operation is failed because flash media is full. - createConfigFilesFailed(3): The save flash operation is failed because configuration file is created unsuccessfully. - openConfigFilesFailed(4): The save flash operation is failed because configuration file can't be opened successfully. - standbyCardCopyConfigFilesFailed(5) : The save flash operation is failed because configuration file can't be copied to the standby board. - unknown(99): The save flash operation is failed for some unknown error.
zxAnSysConfLockObjects	1.3.6.1.4.1.3902.1082.20.1.2.20
zxAnSysConfLockGlobalObjects	1.3.6.1.4.1.3902.1082.20.1.2.20.1
INT zxAnSysConfLockOwner	1.3.6.1.4.1.3902.1082.20.1.2.20.1.1	INTEGER	read-only	Current configuration lock owner of the system. - none(1): The configuration right is unlocked. - snmp(2): The configuration right is locked by snmp manager. - console(3): The configuration right is locked by console user. - telnet(4): The configuration right is locked by telnet user.
INT zxAnSysConfLockSnmp	1.3.6.1.4.1.3902.1082.20.1.2.20.1.2	INTEGER	read-write	Lock or unlock the configuration right of the system. When it is set to lock(1) by snmp manager, only SNMP manager has configuration right.
zxAnSysMgmtPlaneObjects	1.3.6.1.4.1.3902.1082.20.1.2.30
zxAnSysMgmtPlaneGlobalObjects	1.3.6.1.4.1.3902.1082.20.1.2.30.1
INT zxAnSysMgmtPlaneInbandEnable	1.3.6.1.4.1.3902.1082.20.1.2.30.1.3	INTEGER	read-write	Enable or disable inband management channel of the system.
MAC zxAnSysMgmtPlaneOutOfBandMacAddr	1.3.6.1.4.1.3902.1082.20.1.2.30.1.4	MacAddress	read-write	Out of band MAC address of the NE.
MAC zxAnSysMgmtPlaneInBandMacAddr	1.3.6.1.4.1.3902.1082.20.1.2.30.1.5	MacAddress	read-write	In-band MAC address of the NE.
zxAnSysProfileOperObjects	1.3.6.1.4.1.3902.1082.20.1.2.40
zxAnSysProfileOperGlobalObjects	1.3.6.1.4.1.3902.1082.20.1.2.40.1
STR zxAnSysProfileCategory	1.3.6.1.4.1.3902.1082.20.1.2.40.1.1	DisplayString	accessible-for-notify	This object indicates the category of profile.
STR zxAnSysProfileName	1.3.6.1.4.1.3902.1082.20.1.2.40.1.2	DisplayString	accessible-for-notify	This object is used to indicate the profile name. Empty string means that the profile does not support profile name.
I32 zxAnSysProfileId	1.3.6.1.4.1.3902.1082.20.1.2.40.1.3	Integer32	accessible-for-notify	This object is used to indicate the profile ID. Value 0 means that the profile does not support ID.
STR zxAnSysProfileInfo	1.3.6.1.4.1.3902.1082.20.1.2.40.1.4	DisplayString	accessible-for-notify	This object is used to indicate the profile information, such as showing the port list that the profile has been applied.
zxAnSysConfigChangedObjects	1.3.6.1.4.1.3902.1082.20.1.2.50
zxAnSysConfigChangedGlbObjects	1.3.6.1.4.1.3902.1082.20.1.2.50.1
INT zxAnSysLastConfManagerType	1.3.6.1.4.1.3902.1082.20.1.2.50.1.1	INTEGER	accessible-for-notify	Current configuration owner of the system. - snmp(1): The configuration changed by snmp manager. - console(2): The configuration changed by console user. - telnet(3): The configuration changed by virtual teletype terminal user.
STR zxAnSysLastConfManagerLocation	1.3.6.1.4.1.3902.1082.20.1.2.50.1.2	DisplayString	accessible-for-notify	If the zxAnSysLastConfManagerType is snmp(1), the zxAnSysLastConfManagerLocation is the user's IP address. If the zxAnSysLastConfManagerType is console(2), the zxAnSysLastConfManagerLocation is empty string. If the zxAnSysLastConfManagerType is telnet(3), the zxAnSysLastConfManagerLocation is the user's IP address.
zxAnSysMgmtNotifications	1.3.6.1.4.1.3902.1082.20.1.3
zxAnSysConfigSaveTraps	1.3.6.1.4.1.3902.1082.20.1.3.1
NTF zxAnSysConfigSaveFinished	1.3.6.1.4.1.3902.1082.20.1.3.1.1			Notifications when save configuration data operation finish.
zxAnSysProfileOperTraps	1.3.6.1.4.1.3902.1082.20.1.3.2
NTF zxAnSysDelAppliedPrfFailed	1.3.6.1.4.1.3902.1082.20.1.3.2.1			This notification will be sent to managemet system when a profile that has been applied is deleted. If profile supports name, zxAnSysProfileName must be filled first. If profile supports ID, zxAnSysProfileId should be filled with profile ID.
zxAnSysConfigChangedTraps	1.3.6.1.4.1.3902.1082.20.1.3.3
NTF zxAnSysConfigChanged	1.3.6.1.4.1.3902.1082.20.1.3.3.1			This notification will be sent to managemet system when the configuration is changed.
zxAnSysMgmtConformance	1.3.6.1.4.1.3902.1082.20.1.4
zxAnSysMgmtCompliances	1.3.6.1.4.1.3902.1082.20.1.4.1
zxAnSysMgmtCompliance	1.3.6.1.4.1.3902.1082.20.1.4.1.1			The compliance statement for entities which implement the ZTE-AN-SYS-MGMT-MIB.
zxAnSysMgmtGroups	1.3.6.1.4.1.3902.1082.20.1.4.2
zxAnSysConfGroup	1.3.6.1.4.1.3902.1082.20.1.4.2.1			A collection of objects which are used to provide system configuration information.
zxAnSysMgmtGroup	1.3.6.1.4.1.3902.1082.20.1.4.2.2			A collection of objects which are used to provide system management information.
NTF zxAnSysMgmtTrapGroup	1.3.6.1.4.1.3902.1082.20.1.4.2.3			A collection of objects which are used to provide trap information.

RFC description

ZTE access network system management MIB for device configuration, profiles, and status monitoring.

Start monitoring ZTE Access Node (DSLAM/OLT broadband access device) (NTP-sync/syslog-destination config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-AN-SYS-MGMT-MIB

What Is ZTE-AN-SYS-MGMT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description