All MIBs › ZTE-AN-MLD-MIB
Organization: ZTE Corporation
Last Updated: 2011-12-27
Category: ZTE Access Node (ZTE-AN) Management
Description: Manages ZTE access node MLD snooping configuration for IPv6 multicast group management.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZTE-AN-MLD-MIB?
ZTE-AN-MLD-MIB manages MLD (Multicast Listener Discovery) snooping on ZTE Access Node equipment, the IPv6 counterpart to IGMP snooping used to control which ports receive IPv6 multicast traffic based on listener requests. It exposes configuration for enabling/tuning MLD snooping per interface or VLAN, along with status data on active multicast group memberships being tracked by the snooping process. Its monitoring value is in multicast service health: an operator checks that MLD snooping is correctly forwarding IPv6 multicast (e.g., IPTV) only to interested ports, and investigates when a subscriber isn't receiving an expected multicast stream or when snooping state looks stuck or empty. It works in conjunction with the vendor's shared multicast base MIB and depends conceptually on the IETF MLD protocol standard it is snooping. It is deployed on ZTE access nodes delivering IPv6 multicast services such as IPTV to subscribers, and operators managing these deployments typically perform a ZTE-AN-MLD-MIB download to load the module into their SNMP tooling.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-MLD-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE Access Node
Monitoring Examples
The available sample objects, zxAnMldCompliances and zxAnMldGroups, are the standard conformance clauses defining which MLD-snooping objects and groups a compliant ZTE agent must implement; no runtime data-table object names were included in the sample. Based on the module description, an admin would still be expected to poll per-VLAN MLD snooping enable/status and active listener/group-membership state to confirm IPv6 multicast is being correctly snooped and forwarded only to interested ports.
What Can Be Monitored
- MLD snooping enable/status per interface/VLAN
- active multicast group memberships
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| ifIndex | OBJECT-TYPE |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressIPv6 | |
| InetAddressType |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| RowStatus |
From ZTE-AN-IF-MIB
| zxAnSubIfIndex | OBJECT-TYPE |
From ZTE-AN-SMI
| zxAnMulticast | OBJECT-IDENTITY |
From ZTE-AN-TC-MIB
| VlanId | |
| ZxAnPortList |
How to Use in IPNetwork Monitor
Example using zxAnMldPktStatsRxCommQry OID:
Select a ZTE Access Node (MLD snooping IPv6-multicast-group-membership status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxAnMldPktStatsRxCommQry into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The counter of MLD general query message received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zxAnMldMib | 1.3.6.1.4.1.3902.1082.60.2 | This MIB defines Description of zte mld service objects. | ||
| zxAnMldGlobalObjects | 1.3.6.1.4.1.3902.1082.60.2.1 | |||
| INT zxAnMldLogEnable | 1.3.6.1.4.1.3902.1082.60.2.1.1 | INTEGER | read-write | The administrative status of MLD log. |
| INT zxAnMldRouterAlertEnable | 1.3.6.1.4.1.3902.1082.60.2.1.2 | INTEGER | read-write | The administrative status of MLD router alert option. |
| INT zxAnMldBackwardCompatibilityEn | 1.3.6.1.4.1.3902.1082.60.2.1.3 | INTEGER | read-write | The administrative status of MLD backward compatibility. |
| INT zxAnMldSyslogReportingEnable | 1.3.6.1.4.1.3902.1082.60.2.1.4 | INTEGER | read-write | The administrative status of MLD syslog reporting. |
| BIT zxAnMldCapabilities | 1.3.6.1.4.1.3902.1082.60.2.1.100 | Bits | read-only | The MLD capabilities. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means not supporting zxAnMldIfBandwidth. bit 1: value 1 means supporting zxAnMldMgmtMVlanPortListIITable and not supporting zxAnMldMgmtMVlanPortListTable. NOTE: No recommended to display it in NMS. |
| zxAnMldObjects | 1.3.6.1.4.1.3902.1082.60.2.2 | |||
| zxAnMldProtocolObjects | 1.3.6.1.4.1.3902.1082.60.2.2.1 | |||
| zxAnMldProtoBaseObjects | 1.3.6.1.4.1.3902.1082.60.2.2.1.2 | |||
| zxAnMldProtoGlobalObjects | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.1 | |||
| INT zxAnMldEnable | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.1.1 | INTEGER | read-write | The administrative status of global MLD service. |
| zxAnMldProtoIfTable | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.2 | not-accessible | A table that contains all MLD protocol information of an user interface. | |
| zxAnMldProtoIfEntry | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.2.1 | not-accessible | A list of entries of zxAnMldProtoIfTable. | |
| INT zxAnMldIfAdminStatus | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.2.1.1 | INTEGER | read-write | The administrative status of port's MLD service. The value 255 means the object is not supported. |
| INT zxAnMldIfProtoVersion | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.2.1.2 | INTEGER | read-write | The max version of MLD protocol which is supported on this port. The value 255 means the object is not supported. |
| INT zxAnMldIfFastLeaveEnable | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.2.1.3 | INTEGER | read-write | The administrative status of port's fast-leave property. The value 255 means the object is not supported. |
| I32 zxAnMldIfBandwidth | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.2.1.4 | Integer32 | read-write | Multicast bandwidth of this port. Uplink port/PON port: The valid range is 10240~10240000 kbps, and the default value is 1024000 kbps. VPort: The valid range is 100~204800 kbps, and the default value is 102400 kbps. The value 2147483647 means the object is not supported. |
| I32 zxAnMldIfMaxGroups | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.2.1.5 | Integer32 | read-write | Maximum multicast groups that the port may join. The value 0 means the port cannot join any groups. The value 2147483647 means the object is not supported. |
| zxAnMldProtoMVlanTable | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.3 | not-accessible | A table that contains MLD protocol information in Multicast VLAN. | |
| zxAnMldProtoMVlanEntry | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.3.1 | not-accessible | A list of entries of zxAnMldProtoMVlanTable. | |
| I32 zxAnMldMVid | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.3.1.1 | Integer32 | not-accessible | Multicast VLAN ID. |
| INT zxAnMldMVlanMldAdminStatus | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.3.1.2 | INTEGER | read-write | The administrative status of MLD service in this MVLAN. |
| INT zxAnMldMVlanMldV1OperMode | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.3.1.3 | INTEGER | read-write | The operational mode of MLD v1 packet. |
| INT zxAnMldMVlanMldV2OperMode | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.3.1.4 | INTEGER | read-write | The operational mode of MLD v2 packet. |
| INT zxAnMldMVlanMldWorkMode | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.3.1.5 | INTEGER | read-write | The MLD work mode in this MVLAN. The meanings of the values are: snooping(1) - transparently forward MLD packet, snooping is defined in RFC 4541 and TR-101. spr(2) - transparently forward MLD general query and suppress MLD report/leave for existing group membership, SPR(Snooping with Proxy Reporting) is defined in TR-101. proxy(3) - act as a host on the V interface and act as a router on the U interface, proxy is defined in RFC4605. router(4) - act as a terminal on the V interface and act as a router on the U interface, router is defined in TR-101. |
| INT zxAnMldMVlanMldSsmCtrlMode | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.3.1.6 | INTEGER | read-write | The ASM/SSM service control model. The meanings of the values are: asm(1) - only ASM(*, G) requests are permitted, ASM(Any- Source Multicast) is defined in RFC 1112. ssm(2) - only SSM(S, G) requests are permitted, SSM(Source- Specific Multicast) is defined in RFC 3569. asmAndSsm(3) --- both ASM and SSM requests are permitted. |
| ADR zxAnMldMVlanMldSsmIpAddr | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.3.1.7 | InetAddressIPv6 | read-write | The SSM IP address in this MVLAN. All SSM(S, G) request must be in the same IP network segment as the configued SSM IP address and netmask. |
| ADR zxAnMldMVlanMldSsmIpAddrMask | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.3.1.8 | InetAddressIPv6 | read-write | The mask of SSM IP address in this MVLAN. All SSM(S, G) request must be in the same IP network segment as the configued SSM IP address and netmask. |
| I32 zxAnMldMVlanMldCVid | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.3.1.9 | Integer32 | read-write | Multicast C-VID. Value 0 means no C-VID tag. |
| I32 zxAnMldMvlanMldMaxGroups | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.3.1.10 | Integer32 | read-write | Maximum multicast groups that the MVLAN may join. The value 0 means the MVLAN cannot join any groups. |
| INT zxAnMldMVlanGenQryPktTxGrpMode | 1.3.6.1.4.1.3902.1082.60.2.2.1.2.3.1.11 | INTEGER | read-write | The general query packets transmission group mode only on pon interfaces. |
| zxAnMldSnoopingObjects | 1.3.6.1.4.1.3902.1082.60.2.2.1.3 | |||
| zxAnMldSnoopingMVlanTable | 1.3.6.1.4.1.3902.1082.60.2.2.1.3.2 | not-accessible | A table that contains MLD Snooping informations in multicast VLAN. | |
| zxAnMldSnoopingMVlanEntry | 1.3.6.1.4.1.3902.1082.60.2.2.1.3.2.1 | not-accessible | A list of entries of zxAnMldSnoopingMVlanTable. | |
| I32 zxAnMldSnoopingMVlanAgingTime | 1.3.6.1.4.1.3902.1082.60.2.2.1.3.2.1.1 | Integer32 | read-write | The timeout period in seconds for aging out multicast group memberships dynamically learned with MLD which operates on a per interface per VLAN per multicast group basis. Note that it only takes effect in snooping mode. |
| zxAnMldProxyObjects | 1.3.6.1.4.1.3902.1082.60.2.2.1.4 | |||
| zxAnMldProxyMVlanTable | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2 | not-accessible | A table that contains MLD proxy informations in Multicast VLAN. | |
| zxAnMldProxyMVlanEntry | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1 | not-accessible | A list of entries of zxAnMldProxyMVlanTable. | |
| I32 zxAnMldMVlanRobustnessVariable | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.1 | Integer32 | read-write | MLD robustness variable in the MVLAN. |
| INT zxAnMldMVlanHostVersion | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.2 | INTEGER | read-write | The administrative version of MLD packet sent on the host interface. auto(1) - MLD host version is dynamicly determined by the attached router version, according to MLD Host Compatibility Mode described in RFC 3810. mldv1(2) - MLD host version is MLD v1. mldv2(3) - MLD host version is MLD v2. |
| ADR zxAnMldMVlanHostIpAddr | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.3 | InetAddressIPv6 | read-write | The source IP address of MLD packet sent on the host interface. |
| I32 zxAnMldMVlanUnsolReportInterval | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.4 | Integer32 | read-write | MLD unsolicited report interval in the MVLAN. |
| ADR zxAnMldMVlanHostQuerier | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.5 | InetAddressIPv6 | read-only | The IP address of the MLD Querier attached on the host interface which is learned from received MLD general query. |
| INT zxAnMldMVlanHostActualVersion | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.6 | INTEGER | read-only | The running version of MLD packet sent on the host interface. |
| TIK zxAnMldMVlanHostV1QuerierTimer | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.7 | TimeTicks | read-only | The time remaining until the host assumes that there are no MLDv1 routers present on the interface. While this is non-zero, the host will reply to all queries with version 1 membership reports. This variable applies to MLDv2 hosts that are forced to run in v1 for compatibility with v1 routers present on the host interface. |
| ADR zxAnMldMVlanRouterIpAddr | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.8 | InetAddressIPv6 | read-write | The source IP address of MLD query packet sent on the router interface. |
| I32 zxAnMldMVlanQueryInterval | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.9 | Integer32 | read-write | MLD general query interval in the MVLAN. |
| I32 zxAnMldMVlanQueryRespInterval | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.10 | Integer32 | read-write | MLD query max response time in the MVLAN. |
| I32 zxAnMldMVlanLastMemberQryIntvl | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.11 | Integer32 | read-write | MLD last member query interval in the MVLAN. |
| I32 zxAnMldMVlanLastMemberQryCount | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.12 | Integer32 | read-write | MLD last member query count in the MVLAN. |
| I32 zxAnMldMVlanStartUpQryInterval | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.13 | Integer32 | read-write | MLD startup query interval in the MVLAN. When system is start up or port is up |
| I32 zxAnMldMVlanStartUpQryCount | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.14 | Integer32 | read-write | MLD startup query count in the MVLAN. |
| I32 zxAnMldMVlanMldPacketPriority | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.15 | Integer32 | read-write | 802.1p priority of MLD packet sent by the device. Note that it only takes effect in proxy and SPR mode. |
| INT zxAnMldMVlanQryPktProtoVersion | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.16 | INTEGER | read-write | The version of MLD general query packet. mldv1(1) - MLDv1. mldv2(2) - MLDv2. |
| I32 zxAnMldMVlanMldPktTrafficClass | 1.3.6.1.4.1.3902.1082.60.2.2.1.4.2.1.17 | Integer32 | read-write | Traffic class of MLD packet sent by the device. Note that it only takes effect in proxy and SPR mode. |
| zxAnMldMgmtObject | 1.3.6.1.4.1.3902.1082.60.2.2.2 | |||
| zxAnMldMgmtGlobalObject | 1.3.6.1.4.1.3902.1082.60.2.2.2.1 | |||
| INT zxAnMldUserTrackEnable | 1.3.6.1.4.1.3902.1082.60.2.2.2.1.2 | INTEGER | read-write | The administrative status of MLD explicit host tracking. |
| INT zxAnMldBandwidthCtrlEnable | 1.3.6.1.4.1.3902.1082.60.2.2.2.1.3 | INTEGER | read-write | Enable/disable the multicast bandwidth control. enabled(1): the multicast traffic on the user port will be checked before user attempts to join a new multicast group. If the total multicast traffic on the user port has exceeded the configured rate of port, the user will not be allowed to join. disabled(2): the user may join any number of multicast groups eventhough the total multicast traffic on the user port has exceeded the configured rate of port. |
| I32 zxAnMldGroupPrejoinInterval | 1.3.6.1.4.1.3902.1082.60.2.2.2.1.4 | Integer32 | read-write | The interval of MLD requests sent by the multicast group which the prejoin is enabled. |
| INT zxAnMldSpanVlanEnable | 1.3.6.1.4.1.3902.1082.60.2.2.2.1.5 | INTEGER | read-write | Enable/disable the Span-VLAN multicast. Multicast traffic will be forwarded in all of VLANs if enabled. |
| INT zxAnMldGeneralQueryPktsTxMode | 1.3.6.1.4.1.3902.1082.60.2.2.2.1.7 | INTEGER | read-write | The transmitting mode of MLD general query packets. Value 'both' means the device will transmit general query packets in unicast mode and broadcast mode at the same time. |
| zxAnMldMgmtMVlanTable | 1.3.6.1.4.1.3902.1082.60.2.2.2.2 | not-accessible | A table used to create or remove MVLAN. | |
| zxAnMldMgmtMVlanEntry | 1.3.6.1.4.1.3902.1082.60.2.2.2.2.1 | not-accessible | A list of entries of zxAnMldMgmtMVlanTable. | |
| INT zxAnMldMVlanGroupFilterEnable | 1.3.6.1.4.1.3902.1082.60.2.2.2.2.1.1 | INTEGER | read-create | The administrative status of group filter in the MVLAN. |
| ROW zxAnMldMVlanRowStatus | 1.3.6.1.4.1.3902.1082.60.2.2.2.2.1.50 | RowStatus | read-create | The status of this conceptual row. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, the agent always return active(1) |
| zxAnMldMgmtMVlanRecvIfTable | 1.3.6.1.4.1.3902.1082.60.2.2.2.3 | not-accessible | A Table used to add or delete receiving port in a MVLAN. | |
| zxAnMldMgmtMVlanRecvIfEntry | 1.3.6.1.4.1.3902.1082.60.2.2.2.3.1 | not-accessible | A list of entries of zxAnMldMgmtMVlanRecvIfTable. | |
| ROW zxAnMldMgmtMVlanRecvIfRowStatus | 1.3.6.1.4.1.3902.1082.60.2.2.2.3.1.50 | RowStatus | read-create | The status of this conceptual row. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, the agent always return active(1). |
| zxAnMldMgmtMVlanSrcIfTable | 1.3.6.1.4.1.3902.1082.60.2.2.2.4 | not-accessible | A Table used to add or delete source port in a MVLAN. | |
| zxAnMldMgmtMVlanSrcIfEntry | 1.3.6.1.4.1.3902.1082.60.2.2.2.4.1 | not-accessible | A list of entries of zxAnMldMgmtMVlanSrcIfTable. | |
| ROW zxAnMldMVlanSrcIfRowStatus | 1.3.6.1.4.1.3902.1082.60.2.2.2.4.1.50 | RowStatus | read-create | The status of this conceptual row. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, the agent always return active(1) |
| zxAnMldMgmtGroupFilterTable | 1.3.6.1.4.1.3902.1082.60.2.2.2.6 | not-accessible | A table used to add or delete group-filter group segment. | |
| zxAnMldMgmtGroupFilterEntry | 1.3.6.1.4.1.3902.1082.60.2.2.2.6.1 | not-accessible | A list of entries of zxAnMldMgmtGroupFilterTable. | |
| ADR zxAnMldGroupFilterStartGrpIp | 1.3.6.1.4.1.3902.1082.60.2.2.2.6.1.1 | InetAddressIPv6 | not-accessible | Start group ip address of a group segment. |
| ADR zxAnMldGroupFilterEndGrpIp | 1.3.6.1.4.1.3902.1082.60.2.2.2.6.1.2 | InetAddressIPv6 | not-accessible | End group ip address of a group segment. |
| ROW zxAnMldGroupFilterRowStatus | 1.3.6.1.4.1.3902.1082.60.2.2.2.6.1.50 | RowStatus | read-create | The status of this conceptual row. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, the agent always return active(1). |
| zxAnMldMgmtGroupStaticIfTable | 1.3.6.1.4.1.3902.1082.60.2.2.2.7 | not-accessible | A table used to bind or unbind static receiving port to or from multicast group. | |
| zxAnMldMgmtGroupStaticIfEntry | 1.3.6.1.4.1.3902.1082.60.2.2.2.7.1 | not-accessible | A list of entries of zxAnMldMgmtGroupStaticIfTable. | |
| ROW zxAnMldGroupStaticIfRowStatus | 1.3.6.1.4.1.3902.1082.60.2.2.2.7.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnMldMgmtGroupStaticIfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnMldMgmtGroupForwardingTable | 1.3.6.1.4.1.3902.1082.60.2.2.2.9 | not-accessible | A table that contains multicast forwarding port list information. | |
| zxAnMldMgmtGroupForwardingEntry | 1.3.6.1.4.1.3902.1082.60.2.2.2.9.1 | not-accessible | A list of entries of zxAnMldMgmtGroupForwardingTable. This table is not supported in C6XX. | |
| ADR zxAnMldGroupIpAddr | 1.3.6.1.4.1.3902.1082.60.2.2.2.9.1.1 | InetAddressIPv6 | not-accessible | Multicast group IP Address. |
| ADR zxAnMldSourceIpAddr | 1.3.6.1.4.1.3902.1082.60.2.2.2.9.1.2 | InetAddressIPv6 | not-accessible | Multicast source IP Address. |
| I32 zxAnMldShelf | 1.3.6.1.4.1.3902.1082.60.2.2.2.9.1.3 | Integer32 | not-accessible | The shelf that contains the port list. |
| I32 zxAnMldSlot | 1.3.6.1.4.1.3902.1082.60.2.2.2.9.1.4 | Integer32 | not-accessible | The slot that contains the port list. |
| ZXA zxAnMldGroupForwardingPortList | 1.3.6.1.4.1.3902.1082.60.2.2.2.9.1.6 | ZxAnPortList | read-only | The forwarding port list on a line card. In GPON, the forwarding port is PON interface. |
| zxAnMldMgmtGroupUserTable | 1.3.6.1.4.1.3902.1082.60.2.2.2.10 | not-accessible | A table that contains dynamic group user information. | |
| zxAnMldMgmtGroupUserEntry | 1.3.6.1.4.1.3902.1082.60.2.2.2.10.1 | not-accessible | A list of entries of zxAnMldMgmtGroupUserTable. | |
| MAC zxAnMldUserMacAddr | 1.3.6.1.4.1.3902.1082.60.2.2.2.10.1.1 | MacAddress | not-accessible | The user MAC address which is tracked from the MLD request packets sent by user device. Note that zxAnMldUserTrackEnable must be enabled firstly, otherwise the user MAC address will be ALL-ZERO. |
| ADR zxAnMldUserIpAddr | 1.3.6.1.4.1.3902.1082.60.2.2.2.10.1.2 | InetAddressIPv6 | read-only | The user IP address which is tracked from the MLD request packets sent by user device. Note that zxAnMldUserTrackEnable must be enabled firstly, otherwise the user IP address will be ALL-ZERO. |
| INT zxAnMldGrpUserSrcFilterMode | 1.3.6.1.4.1.3902.1082.60.2.2.2.10.1.3 | INTEGER | read-only | MLDv2 source filter mode of the group user. |
| zxAnMldMgmtGroupPrejoinTable | 1.3.6.1.4.1.3902.1082.60.2.2.2.11 | not-accessible | A table used to add or delete multicast group prejoin configuration. | |
| zxAnMldMgmtGroupPrejoinEntry | 1.3.6.1.4.1.3902.1082.60.2.2.2.11.1 | not-accessible | A list of entries of zxAnMldMgmtGroupPrejoinTable. | |
| ROW zxAnMldGroupPrejoinRowStatus | 1.3.6.1.4.1.3902.1082.60.2.2.2.11.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnMldMgmtGroupPrejoinEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnMldMgmtGroupConfTable | 1.3.6.1.4.1.3902.1082.60.2.2.2.12 | not-accessible | A table used to configure multicast group information. | |
| zxAnMldMgmtGroupConfEntry | 1.3.6.1.4.1.3902.1082.60.2.2.2.12.1 | not-accessible | A list of entries of zxAnMldMgmtGroupConfTable. | |
| I32 zxAnMldGroupBandwidth | 1.3.6.1.4.1.3902.1082.60.2.2.2.12.1.1 | Integer32 | read-create | Multicast group bandwidth. |
| ROW zxAnMldGroupConfRowStatus | 1.3.6.1.4.1.3902.1082.60.2.2.2.12.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnMldMgmtGroupConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnMldMgmtSpanVlanTable | 1.3.6.1.4.1.3902.1082.60.2.2.2.14 | not-accessible | A table that contains MLD span VLAN information for VLANs. MLD packets of this SVLAN will be processed. | |
| zxAnMldMgmtSpanVlanEntry | 1.3.6.1.4.1.3902.1082.60.2.2.2.14.1 | not-accessible | An entries of zxAnMldMgmtSpanVlanTable. | |
| VLA zxAnMldMgmtSpanVid | 1.3.6.1.4.1.3902.1082.60.2.2.2.14.1.1 | VlanId | not-accessible | VLAN ID. |
| ROW zxAnMldSpanVlanRowStatus | 1.3.6.1.4.1.3902.1082.60.2.2.2.14.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnMldMgmtSpanVlanEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnMldMgmtMVlanPortListIITable | 1.3.6.1.4.1.3902.1082.60.2.2.2.17 | not-accessible | Multicast receiving ports list table. | |
| zxAnMldMgmtMVlanPortListIIEntry | 1.3.6.1.4.1.3902.1082.60.2.2.2.17.1 | not-accessible | Multicast receiving ports list entry. | |
| I32 zxAnMldMgmtMVlanPortListIIRack | 1.3.6.1.4.1.3902.1082.60.2.2.2.17.1.1 | Integer32 | not-accessible | The rack that contains the port list. |
| I32 zxAnMldMgmtMVlanPortListIIShelf | 1.3.6.1.4.1.3902.1082.60.2.2.2.17.1.2 | Integer32 | not-accessible | The shelf that contains the port list. |
| I32 zxAnMldMgmtMVlanPortListIISlot | 1.3.6.1.4.1.3902.1082.60.2.2.2.17.1.3 | Integer32 | not-accessible | The slot that contains the port list. |
| I32 zxAnMldMgmtMVlanPortListIIPort | 1.3.6.1.4.1.3902.1082.60.2.2.2.17.1.4 | Integer32 | not-accessible | The port that contains the port list. Value 0 means non-PON port, other values means EPON/GPON port. |
| I32 zxAnMldMgmtMVlanPortListIISeg | 1.3.6.1.4.1.3902.1082.60.2.2.2.17.1.5 | Integer32 | not-accessible | The segment of ONU that contains the port list. The segment will range from 1 to 16 when the port is EPON/GPON port. The segment will be always 1 when the port is non-PON port. |
| ZXA zxAnMldMgmtMVlanRecvPortListII | 1.3.6.1.4.1.3902.1082.60.2.2.2.17.1.6 | ZxAnPortList | read-only | The receiving port list in the MVLAN. |
| zxAnMldVplsObjects | 1.3.6.1.4.1.3902.1082.60.2.2.3 | |||
| zxAnMldLogObjects | 1.3.6.1.4.1.3902.1082.60.2.2.4 | |||
| zxAnMldLogGlobalObjects | 1.3.6.1.4.1.3902.1082.60.2.2.4.1 | |||
| INT zxAnMldLogQueryPacketRecordEn | 1.3.6.1.4.1.3902.1082.60.2.2.4.1.1 | INTEGER | read-write | The administrative status of recording MLD query packets. |
| INT zxAnMldLogManualSend | 1.3.6.1.4.1.3902.1082.60.2.2.4.1.2 | INTEGER | read-write | Sending MLD log records to SMS at once. When get this variable, always return 1. |
| zxAnMldLogServerTable | 1.3.6.1.4.1.3902.1082.60.2.2.4.2 | not-accessible | MLD log servers table. | |
| zxAnMldLogServerEntry | 1.3.6.1.4.1.3902.1082.60.2.2.4.2.1 | not-accessible | MLD log servers entry. | |
| IPt zxAnMldLogServerIpAddrType | 1.3.6.1.4.1.3902.1082.60.2.2.4.2.1.1 | InetAddressType | not-accessible | MLD log server IP address type. |
| IP zxAnMldLogServerIpAddr | 1.3.6.1.4.1.3902.1082.60.2.2.4.2.1.2 | InetAddress | not-accessible | MLD log server IP address. |
| STR zxAnMldLogServerUserName | 1.3.6.1.4.1.3902.1082.60.2.2.4.2.1.3 | DisplayString | read-create | MLD log server user name. |
| STR zxAnMldLogServerPassword | 1.3.6.1.4.1.3902.1082.60.2.2.4.2.1.4 | DisplayString | read-create | MLD log server password. |
| INT zxAnMldLogServerFtpType | 1.3.6.1.4.1.3902.1082.60.2.2.4.2.1.5 | INTEGER | read-create | MLD log server protocol type. |
| STR zxAnMldLogVrfName | 1.3.6.1.4.1.3902.1082.60.2.2.4.2.1.6 | DisplayString | read-create | The VRF name. When set this variable, an empty string is not supported. When get this variable, always return an empty string. |
| IPt zxAnMldLogHostIpAddrType | 1.3.6.1.4.1.3902.1082.60.2.2.4.2.1.7 | InetAddressType | read-create | Host IP address type. |
| IP zxAnMldLogHostIpAddr | 1.3.6.1.4.1.3902.1082.60.2.2.4.2.1.8 | InetAddress | read-create | Host IP address. |
| ROW zxAnMldLogServerRowStatus | 1.3.6.1.4.1.3902.1082.60.2.2.4.2.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnMldLogServerEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnMldStatsObjects | 1.3.6.1.4.1.3902.1082.60.2.2.50 | |||
| zxAnMldPktStatsTable | 1.3.6.1.4.1.3902.1082.60.2.2.50.2 | not-accessible | A table that contains MLD packet statistics information. | |
| zxAnMldPktStatsEntry | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1 | not-accessible | When query MLD global statistics, all index must be zero. When query MLD statistics of a specific MVLAN, ifIndex and zxAnSubIfIndex must be zero. When query MLD statistics of a specific interface, zxAnMldMVid must be zero. When query MLD statistics of a specific interface in a MVLAN, all index must be non zero. | |
| C32 zxAnMldPktStatsRxCommQryEx | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.1 | Counter32 | read-only | The counter of MLD general query message received. |
| C32 zxAnMldPktStatsRxSpecialQry | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.2 | Counter32 | read-only | The counter of MLD special query message received. |
| C32 zxAnMldPktStatsRxV1Report | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.3 | Counter32 | read-only | The counter of MLD v1 report message received. |
| C32 zxAnMldPktStatsRxV2Report | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.4 | Counter32 | read-only | The counter of MLD v2 report message received. |
| C32 zxAnMldPktStatsRxLeave | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.5 | Counter32 | read-only | The counter of MLD leave message received. |
| C32 zxAnMldPktStatsRxError | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.6 | Counter32 | read-only | The counter of MLD error message received. |
| C32 zxAnMldPktStatsRxUnknown | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.7 | Counter32 | read-only | The counter of MLD unknown message received. |
| C32 zxAnMldPktStatsTxCommQry | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.8 | Counter32 | read-only | The counter of MLD general query message transmitted. |
| C32 zxAnMldPktStatsTxSpecialQry | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.9 | Counter32 | read-only | The counter of MLD special query message transmitted. |
| C32 zxAnMldPktStatsTxV1Report | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.10 | Counter32 | read-only | The counter of MLD v1 report message transmitted. |
| C32 zxAnMldPktStatsTxV2Report | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.11 | Counter32 | read-only | The counter of MLD v2 report message transmitted. |
| C32 zxAnMldPktStatsTxLeave | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.12 | Counter32 | read-only | The counter of MLD leave message transmitted. |
| C32 zxAnMldPktStatsDropRxCommQry | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.13 | Counter32 | read-only | The counter of MLD general query message dropped. |
| C32 zxAnMldPktStatsDropRxSpeQry | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.14 | Counter32 | read-only | The counter of MLD special query message dropped. |
| C32 zxAnMldPktStatsDropRxV1Report | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.15 | Counter32 | read-only | The counter of MLD v1 report message dropped. |
| C32 zxAnMldPktStatsDropRxV2Report | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.16 | Counter32 | read-only | The counter of MLD v2 report message dropped. |
| C32 zxAnMldPktStatsDropRxLeave | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.17 | Counter32 | read-only | The counter of MLD leave message dropped. |
| C32 zxAnMldPktStatsDropRxUnknown | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.18 | Counter32 | read-only | The counter of MLD unknown message dropped. |
| C32 zxAnMldPktStatsJoinSuccess | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.19 | Counter32 | read-only | The counter of successful MLD joins. |
| C32 zxAnMldPktStatsJoinFailure | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.20 | Counter32 | read-only | The counter of failure MLD joins. |
| I32 zxAnMldPktStatsReset | 1.3.6.1.4.1.3902.1082.60.2.2.50.2.1.100 | Integer32 | read-write | The action object to reset the statistics values. When reset the statistics, it must be set to '1', associated with corresponding index. When be queried, it always returns '0'. |
| zxAnMldIfStatsTable | 1.3.6.1.4.1.3902.1082.60.2.2.50.3 | not-accessible | A table that contains MLD group statistics information of an user interface. | |
| zxAnMldIfStatsEntry | 1.3.6.1.4.1.3902.1082.60.2.2.50.3.1 | not-accessible | An entry for zxAnMldIfStatsTable. | |
| G32 zxAnMldIfCurrActGroups | 1.3.6.1.4.1.3902.1082.60.2.2.50.3.1.1 | Gauge32 | read-only | The active multicast group number on this interface. |
| zxAnMldMVlanStatsTable | 1.3.6.1.4.1.3902.1082.60.2.2.50.4 | not-accessible | A table that contains MLD group statistics information in a MVLAN. | |
| zxAnMldMVlanStatsEntry | 1.3.6.1.4.1.3902.1082.60.2.2.50.4.1 | not-accessible | An entry for zxAnMldMVlanStatsTable. | |
| G32 zxAnMldMVlanCurrActGroups | 1.3.6.1.4.1.3902.1082.60.2.2.50.4.1.1 | Gauge32 | read-only | The active multicast group number in the MVLAN. |
| zxAnMldGroupStatsTable | 1.3.6.1.4.1.3902.1082.60.2.2.50.5 | not-accessible | A table that contains interface statistics information in a multicast group. | |
| zxAnMldGroupStatsEntry | 1.3.6.1.4.1.3902.1082.60.2.2.50.5.1 | not-accessible | A list of entries of zxAnMldGroupStatsTable. | |
| I32 zxAnMldGroupActiveUsers | 1.3.6.1.4.1.3902.1082.60.2.2.50.5.1.1 | Integer32 | read-only | Number of active users associated with specified multicast group. |
| zxAnMldConformance | 1.3.6.1.4.1.3902.1082.60.2.4 | |||
| zxAnMldCompliances | 1.3.6.1.4.1.3902.1082.60.2.4.1 | |||
| zxAnMldCompliance | 1.3.6.1.4.1.3902.1082.60.2.4.1.1 | The compliance statement for entities which implement the ZTE-AN-MLD-MIB. | ||
| zxAnMldGroups | 1.3.6.1.4.1.3902.1082.60.2.4.2 | |||
| zxAnMldProtocolGroup | 1.3.6.1.4.1.3902.1082.60.2.4.2.1 | A collection of objects providing Mld protocol information. | ||
| zxAnMldManagementGroup | 1.3.6.1.4.1.3902.1082.60.2.4.2.2 | A collection of objects providing Mld management information. | ||
| zxAnMldStatsGroup | 1.3.6.1.4.1.3902.1082.60.2.4.2.4 | A collection of objects providing Mld statistics information. |
RFC description
Monitors IPv6 Multicast Listener Discovery (MLD) service including snooping, proxy, and VLAN-based multicast management for ZTE access networks.
Start monitoring ZTE Access Node (MLD snooping IPv6-multicast-group-membership status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.