ZTE-AN-PON-PERF-MIB

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZTE-AN-PON-PERF-MIB

Organization: ZTE Corporation

Last Updated: 2012-07-27

Category: ZTE Access Node (ZTE-AN) Management

Description: Monitors ZTE access node PON upstream and downstream performance counters for capacity management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-AN-PON-PERF-MIB?

ZTE-AN-PON-PERF-MIB is a ZTE enterprise MIB for access-node (AN) equipment that manages performance data for Passive Optical Network (PON) systems, covering both the OLT (Optical Line Terminal) and ONU (Optical Network Unit) sides of the PON. It organizes its objects into separate OLT-performance and ONU-performance object groups alongside a conformance section, indicating it exposes upstream and downstream traffic/error performance counters for PON ports and subscriber terminals. Its monitoring focus is on hardware and link performance status -- tracking PON port throughput, error, and utilization counters on the OLT and corresponding counters on each subscriber ONU -- which operators use for capacity planning and detecting degraded fiber or optical transceiver performance. As an AN/PON-specific MIB it likely complements standard PON/GPON interface MIBs for correlating performance data to physical PON ports. It is typically deployed on ZTE OLT access nodes in FTTH/FTTB broadband access networks operated by telecom carriers. Network engineers evaluating or troubleshooting this functionality can download the ZTE-AN-PON-PERF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-PON-PERF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • ZTE OLT (Optical Line Terminal) access node
  • ZTE PON/GPON subscriber ONU

Monitoring Examples

The provided sample objects for this MIB are limited to top-level object-group identifiers (zxAnPonOltPerfObjects, zxAnPonOnuPerfObjects, zxAnPonPerfConformance/Compliances/Groups) rather than leaf performance counters, so specific counter names cannot be confirmed. Based on the module's stated purpose, an operator would use the OLT-side performance group to monitor upstream/downstream traffic and error counters per PON port, and the ONU-side group to track per-subscriber optical performance, in order to detect a PON port nearing capacity or an ONU experiencing rising optical errors, but the exact object names cannot be grounded beyond these group identifiers.

What Can Be Monitored

  • OLT PON port performance counters
  • ONU-side optical performance counters
  • upstream/downstream traffic statistics
  • PON error/utilization statistics

This MIB depends on

Related MIBs

Imported Objects

From HC-PerfHist-TC-MIB

HCPerfCurrentCount
HCPerfTimeElapsed

From IF-MIB

ifIndexOBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TruthValue

From ZTE-AN-PON-BASE-MIB

zxAnPonOnuIndexOBJECT-TYPE

From ZTE-AN-SMI

zxAnPonOBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using zxAnPonOltIfRxOctets OID:

Select a ZTE OLT (Optical Line Terminal) access node, ZTE PON/GPON subscriber ONU (upstream/downstream PON throughput/error-counter status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxAnPonOltIfRxOctets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the received octets. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

PON (Passive Optical Network) performance metrics for ZTE access networks, monitoring OLT and ONU interface statistics.

Start monitoring ZTE OLT (Optical Line Terminal) access node, ZTE PON/GPON subscriber ONU (upstream/downstream PON throughput/error-counter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-AN-PON-PERF-MIB