ZXR10-SSM-MIB

All MIBs › ZXR10-SSM-MIB

Organization: ZTE Corporation

Last Updated: 2015-06-29

Category: ZTE ZXR10 Multicast

Description: Manages ZTE ZXR10 Source-Specific Multicast configuration for IGMPv3 and PIM-SSM group source filtering.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-SSM-MIB?

ZXR10-SSM-MIB is a ZTE MIB for the ZXR10 router/switch platform, managing Source-Specific Multicast (SSM) configuration used with IGMPv3 and PIM-SSM to filter permitted multicast sources for a group. It exposes configuration objects for SSM group/source mappings and related protocol settings controlling which sources are permitted for a given multicast group. Its monitoring value centers on multicast service/software status -- confirming SSM mappings are correctly applied and active lets an operator verify multicast source filtering is functioning as intended, a service-health check for multicast delivery rather than a hardware sensor. It builds on the IETF PIM-SSM and IGMPv3 protocol standards (RFC 4607/3376) as its underlying protocol model, layered as a ZTE-proprietary enterprise MIB. It is deployed on ZTE ZXR10 routers/switches in service-provider or enterprise networks delivering source-specific multicast services such as IPTV, and a ZXR10-SSM-MIB download from ZTE's MIB packages lets an operator load it into a MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-SSM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 router/switch

Monitoring Examples

No specific object or table names were supplied for this module beyond the IMPORTS clause, so a concrete example cannot be grounded in real identifiers. Based on its stated purpose, an operator would typically poll SSM group-to-source mapping table entries to confirm a given multicast group is correctly restricted to its permitted source addresses, revealing a misconfigured or missing SSM mapping if a multicast stream fails to reach a subscriber.

What Can Be Monitored

SSM group-to-source mapping configuration
PIM-SSM/IGMPv3 protocol status

Imported Objects

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus

From ZXR10-SMI

zxr10

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxr10SSM	1.3.6.1.4.1.3902.3.304			The MIB module to describe the SSM protocol
zxr10SSMAdmCurOutClkEntry	1.3.6.1.4.1.3902.3.304.10.1		not-accessible	A list of current SSM out clock information.
OCT zxr10SSMAdmCurOutClkIfName	1.3.6.1.4.1.3902.3.304.10.1.1	OCTET STRING	not-accessible	The external clock name of the current out clock.
INT zxr10SSMAdmCurOutClkMode	1.3.6.1.4.1.3902.3.304.10.1.5	INTEGER	read-only	The mode of the current out clock.
INT zxr10SSMAdmCurOutClkQL	1.3.6.1.4.1.3902.3.304.10.1.6	INTEGER	read-only	The quality of the current out clock.
INT zxr10SSMAdmCurOutClkState	1.3.6.1.4.1.3902.3.304.10.1.4	INTEGER	read-only	The state of the current out clock.
INT zxr10SSMAdmCurOutClkSubClkType	1.3.6.1.4.1.3902.3.304.10.1.2	INTEGER	read-only	The clock type in the current ssm out clock table.
OCT zxr10SSMAdmCurOutClkSubIfName	1.3.6.1.4.1.3902.3.304.10.1.3	OCTET STRING	read-only	The clock name of the current out clock.
zxr10SSMAdmCurOutClkTable	1.3.6.1.4.1.3902.3.304.10		not-accessible	A table that contains current SSM out clock info.
INT zxr10SSMClkSwitchClkType	1.3.6.1.4.1.3902.3.304.5.3	INTEGER	read-only	SSM clock switch clock type.
zxr10SSMClkSwitchInfo	1.3.6.1.4.1.3902.3.304.5
OCT zxr10SSMClkSwitchIntName	1.3.6.1.4.1.3902.3.304.5.2	OCTET STRING	read-only	SSM clock switch interface name.
INT zxr10SSMClkSwitchStatus	1.3.6.1.4.1.3902.3.304.5.1	INTEGER	read-only	SSM clock switch status.
zxr10SSMCurClockInfo	1.3.6.1.4.1.3902.3.304.3
OCT zxr10SSMCurClockIntName	1.3.6.1.4.1.3902.3.304.3.2	OCTET STRING	read-only	SSM current clock interface name.
INT zxr10SSMCurClockPllStatus	1.3.6.1.4.1.3902.3.304.3.3	INTEGER	read-only	SSM current clock pll status.
INT zxr10SSMCurClockQuality	1.3.6.1.4.1.3902.3.304.3.6	INTEGER	read-only	SSM current clock quality.
INT zxr10SSMCurClockSSMEnable	1.3.6.1.4.1.3902.3.304.3.4	INTEGER	read-only	SSM current clock SSM enable.
INT zxr10SSMCurClockSwitchStatus	1.3.6.1.4.1.3902.3.304.3.5	INTEGER	read-only	SSM current clock switch status.
INT zxr10SSMCurClockType	1.3.6.1.4.1.3902.3.304.3.1	INTEGER	read-only	SSM current clock clock type.
I32 zxr10SSMCurOutClockConfigId	1.3.6.1.4.1.3902.3.304.4.1.1	Integer32	not-accessible	The out clock id in current ssm out clock configure table.
zxr10SSMCurOutClockEntry	1.3.6.1.4.1.3902.3.304.4.1		not-accessible	A list of entries of SSM out clock config information.
OCT zxr10SSMCurOutClockInterface	1.3.6.1.4.1.3902.3.304.4.1.5	OCTET STRING	read-only	The port name of the current out clock.
INT zxr10SSMCurOutClockMode	1.3.6.1.4.1.3902.3.304.4.1.7	INTEGER	read-only	The mode of the current out clock.
OCT zxr10SSMCurOutClockOutPort	1.3.6.1.4.1.3902.3.304.4.1.4	OCTET STRING	read-only	The current out port name of the current out clock.
INT zxr10SSMCurOutClockQuality	1.3.6.1.4.1.3902.3.304.4.1.8	INTEGER	read-only	The quality of the current out clock.
INT zxr10SSMCurOutClockState	1.3.6.1.4.1.3902.3.304.4.1.6	INTEGER	read-only	The state of the current out clock.
zxr10SSMCurOutClockTable	1.3.6.1.4.1.3902.3.304.4		not-accessible	A table that contains current SSM out clock info.
INT zxr10SSMCurOutClockType	1.3.6.1.4.1.3902.3.304.4.1.3	INTEGER	read-only	The current out clock type in the current ssm out clock table.
INT zxr10SSMEdgeLinkCfgClkType	1.3.6.1.4.1.3902.3.304.13.1.2	INTEGER	not-accessible	The SSM edge link clock type.
INT zxr10SSMEdgeLinkCfgEdgeLink	1.3.6.1.4.1.3902.3.304.13.1.3	INTEGER	read-only	The SSM sync clock is or not other device.
zxr10SSMEdgeLinkCfgEntry	1.3.6.1.4.1.3902.3.304.13.1		not-accessible	Information about the edge link of SSM.
OCT zxr10SSMEdgeLinkCfgIfName	1.3.6.1.4.1.3902.3.304.13.1.1	OCTET STRING	not-accessible	The SSM edge link clock interface name
ROW zxr10SSMEdgeLinkCfgRowStatus	1.3.6.1.4.1.3902.3.304.13.1.100	RowStatus	read-create	create or delete ssm edge link clock
zxr10SSMEdgeLinkCfgTable	1.3.6.1.4.1.3902.3.304.13		not-accessible	A table containing SSM edge link information.
INT zxr10SSMInit	1.3.6.1.4.1.3902.3.304.12	INTEGER	read-only	Initial all SSM attribution,the value 1 means to execute initialization. read access has no actual importance.
zxr10SSMOutClkBindCfgEntry	1.3.6.1.4.1.3902.3.304.9.1		not-accessible	SSM out clock bind information.
OCT zxr10SSMOutClkBindCfgIfName	1.3.6.1.4.1.3902.3.304.9.1.1	OCTET STRING	not-accessible	The SSM out clock interface name
INT zxr10SSMOutClkBindCfgPriority	1.3.6.1.4.1.3902.3.304.9.1.4	INTEGER	read-only	The SSM out clock priority.
ROW zxr10SSMOutClkBindCfgRowStatus	1.3.6.1.4.1.3902.3.304.9.1.100	RowStatus	read-create	create or delete ssm out clock bind
INT zxr10SSMOutClkBindCfgSubClkType	1.3.6.1.4.1.3902.3.304.9.1.3	INTEGER	not-accessible	The SSM out clock bind clock type.
OCT zxr10SSMOutClkBindCfgSubIfName	1.3.6.1.4.1.3902.3.304.9.1.2	OCTET STRING	not-accessible	The SSM out clock bind interface name.
zxr10SSMOutClkBindCfgTable	1.3.6.1.4.1.3902.3.304.9		not-accessible	A table containing SSM out clock bind information.
INT zxr10SSMOutClkCfgBits	1.3.6.1.4.1.3902.3.304.8.1.4	INTEGER	read-only	The SSM out clock bits.
zxr10SSMOutClkCfgEntry	1.3.6.1.4.1.3902.3.304.8.1		not-accessible	SSM out clock information.
OCT zxr10SSMOutClkCfgIfName	1.3.6.1.4.1.3902.3.304.8.1.1	OCTET STRING	not-accessible	The SSM out clock interface name
INT zxr10SSMOutClkCfgOutMode	1.3.6.1.4.1.3902.3.304.8.1.3	INTEGER	read-only	The SSM out clock mode.
INT zxr10SSMOutClkCfgQLLimit	1.3.6.1.4.1.3902.3.304.8.1.2	INTEGER	read-only	The SSM out clock quality limit.
ROW zxr10SSMOutClkCfgRowStatus	1.3.6.1.4.1.3902.3.304.8.1.100	RowStatus	read-create	create or delete ssm out clock
zxr10SSMOutClkCfgTable	1.3.6.1.4.1.3902.3.304.8		not-accessible	A table containing SSM out clock information.
INT zxr10SSMOutClkClkType	1.3.6.1.4.1.3902.3.304.2.1.5	INTEGER	read-only	The type of the out clock.
zxr10SSMOutClkConfigEntry	1.3.6.1.4.1.3902.3.304.2.1		not-accessible	A list of entries of SSM out clock config information.
I32 zxr10SSMOutClkConfigId	1.3.6.1.4.1.3902.3.304.2.1.1	Integer32	not-accessible	The out clock id in the ssm out clock configure table.
OCT zxr10SSMOutClkConfigInterface	1.3.6.1.4.1.3902.3.304.2.1.6	OCTET STRING	read-only	The port name of the out clock.
zxr10SSMOutClkConfigTable	1.3.6.1.4.1.3902.3.304.2		not-accessible	A table that contains SSM out clock config info.
OCT zxr10SSMOutClkOutPort	1.3.6.1.4.1.3902.3.304.2.1.2	OCTET STRING	read-only	The out port name of the out clock.
INT zxr10SSMOutClkPriority	1.3.6.1.4.1.3902.3.304.2.1.7	INTEGER	read-only	The out priority of the out clock. Its value is 1~N, and its default value is 1.
INT zxr10SSMOutClkQualityLimit	1.3.6.1.4.1.3902.3.304.2.1.3	INTEGER	read-only	The quality limit value of the out clock. Its default value is 11.
INT zxr10SSMOutClkSelectMode	1.3.6.1.4.1.3902.3.304.2.1.4	INTEGER	read-only	The select mode value of the out clock.
INT zxr10SSMPortConfigClockType	1.3.6.1.4.1.3902.3.304.1.1.2	INTEGER	not-accessible	SSM port config clock type.
INT zxr10SSMPortConfigEdgeLink	1.3.6.1.4.1.3902.3.304.1.1.10	INTEGER	read-only	SSM port config edge link.
zxr10SSMPortConfigEntry	1.3.6.1.4.1.3902.3.304.1.1		not-accessible	This list contains SSM port config parameters and is indexed by zxr10SSMPortConfigClockType,zxr10SSMPortConfigIntName.
INT zxr10SSMPortConfigFrame	1.3.6.1.4.1.3902.3.304.1.1.5	INTEGER	read-only	SSM port config frame.
I32 zxr10SSMPortConfigID	1.3.6.1.4.1.3902.3.304.1.1.1	Integer32	read-only	SSM port config ID.
OCT zxr10SSMPortConfigIntName	1.3.6.1.4.1.3902.3.304.1.1.3	OCTET STRING	not-accessible	SSM port config interface name.
INT zxr10SSMPortConfigLockStatus	1.3.6.1.4.1.3902.3.304.1.1.11	INTEGER	read-only	SSM port config lock status.
INT zxr10SSMPortConfigLostStatus	1.3.6.1.4.1.3902.3.304.1.1.16	INTEGER	read-only	SSM port config lost status.
INT zxr10SSMPortConfigPriority	1.3.6.1.4.1.3902.3.304.1.1.4	INTEGER	read-only	SSM port config priority.
INT zxr10SSMPortConfigQuality	1.3.6.1.4.1.3902.3.304.1.1.7	INTEGER	read-only	SSM port config quality.
INT zxr10SSMPortConfigRcvSaPos	1.3.6.1.4.1.3902.3.304.1.1.13	INTEGER	read-only	SSM port config receive sa postion.
INT zxr10SSMPortConfigRecMode	1.3.6.1.4.1.3902.3.304.1.1.6	INTEGER	read-only	SSM port config receive mode.
ROW zxr10SSMPortConfigRowStatus	1.3.6.1.4.1.3902.3.304.1.1.100	RowStatus	read-create	create or delete ssm sync clock
INT zxr10SSMPortConfigSendS1Opr	1.3.6.1.4.1.3902.3.304.1.1.8	INTEGER	read-only	SSM port config send S1 operation.
INT zxr10SSMPortConfigSendS1Value	1.3.6.1.4.1.3902.3.304.1.1.9	INTEGER	read-only	SSM port config send S1 value.
INT zxr10SSMPortConfigSendSaPos	1.3.6.1.4.1.3902.3.304.1.1.14	INTEGER	read-only	SSM port config send sa postion.
INT zxr10SSMPortConfigSwitchStatus	1.3.6.1.4.1.3902.3.304.1.1.15	INTEGER	read-only	SSM port config switch status.
zxr10SSMPortConfigTable	1.3.6.1.4.1.3902.3.304.1		not-accessible	This table contains SSM port config entry.
INT zxr10SSMPortConfigWtrStatus	1.3.6.1.4.1.3902.3.304.1.1.12	INTEGER	read-only	SSM port config wtr status.
zxr10SSMSaPosCfgEntry	1.3.6.1.4.1.3902.3.304.15.1		not-accessible	SSM sa position.
OCT zxr10SSMSaPosCfgIfName	1.3.6.1.4.1.3902.3.304.15.1.1	OCTET STRING	not-accessible	The SSM external interface name.
ROW zxr10SSMSaPosCfgRowStatus	1.3.6.1.4.1.3902.3.304.15.1.100	RowStatus	read-create	create or delete ssm sa position clock.
INT zxr10SSMSaPosCfgSaRcv	1.3.6.1.4.1.3902.3.304.15.1.2	INTEGER	read-only	The SSM sa receive position.
INT zxr10SSMSaPosCfgSaSend	1.3.6.1.4.1.3902.3.304.15.1.3	INTEGER	read-only	The SSM sa send position.
zxr10SSMSaPosCfgTable	1.3.6.1.4.1.3902.3.304.15		not-accessible	A table containing SSM sa position information.
INT zxr10SSMStatusEnable	1.3.6.1.4.1.3902.3.304.6.1	INTEGER	read-only	SSM status enable.
INT zxr10SSMStatusIDProtect	1.3.6.1.4.1.3902.3.304.6.5	INTEGER	read-only	SSM status ID protect
zxr10SSMStatusInfo	1.3.6.1.4.1.3902.3.304.6
INT zxr10SSMStatusMode	1.3.6.1.4.1.3902.3.304.6.2	INTEGER	read-only	SSM status mode.
INT zxr10SSMStatusQLLimit	1.3.6.1.4.1.3902.3.304.6.9	INTEGER	read-only	Enable the SSM local quality limit
INT zxr10SSMStatusQlUnknown	1.3.6.1.4.1.3902.3.304.6.6	INTEGER	read-only	SSM status quality unknown.
INT zxr10SSMStatusSecQl	1.3.6.1.4.1.3902.3.304.6.7	INTEGER	read-only	SSM status sec quality.
INT zxr10SSMStatusStation	1.3.6.1.4.1.3902.3.304.6.3	INTEGER	read-only	SSM status station.
INT zxr10SSMStatusStationID	1.3.6.1.4.1.3902.3.304.6.4	INTEGER	read-only	SSM status station ID.
INT zxr10SSMStatusWtrTime	1.3.6.1.4.1.3902.3.304.6.8	INTEGER	read-only	SSM status wtr time,waiting interval for clock recover after clearing alarms.
INT zxr10SSMTransDisableCfgClkType	1.3.6.1.4.1.3902.3.304.7.1.2	INTEGER	not-accessible	The SSM sync clock type.
INT zxr10SSMTransDisableCfgDisable	1.3.6.1.4.1.3902.3.304.7.1.3	INTEGER	read-only	Enable/Disable transmit s1.
zxr10SSMTransDisableCfgEntry	1.3.6.1.4.1.3902.3.304.7.1		not-accessible	Information about the disable transmit s1 of SSM.
OCT zxr10SSMTransDisableCfgIfName	1.3.6.1.4.1.3902.3.304.7.1.1	OCTET STRING	not-accessible	The SSM sync clock interface name
ROW zxr10SSMTransDisableCfgRowStatus	1.3.6.1.4.1.3902.3.304.7.1.100	RowStatus	read-create	create or delete ssm transmit s1 sync clock
zxr10SSMTransDisableCfgTable	1.3.6.1.4.1.3902.3.304.7		not-accessible	A table containing disable transmit s1 information.
INT zxr10SSMTransS1CfgClkType	1.3.6.1.4.1.3902.3.304.14.1.2	INTEGER	not-accessible	The SSM sync clock type.
zxr10SSMTransS1CfgEntry	1.3.6.1.4.1.3902.3.304.14.1		not-accessible	Information about the transmit s1 of SSM.
OCT zxr10SSMTransS1CfgIfName	1.3.6.1.4.1.3902.3.304.14.1.1	OCTET STRING	not-accessible	The SSM sync clock interface name.
INT zxr10SSMTransS1CfgOpr	1.3.6.1.4.1.3902.3.304.14.1.3	INTEGER	read-only	The transmit S1 operation.
ROW zxr10SSMTransS1CfgRowStatus	1.3.6.1.4.1.3902.3.304.14.1.100	RowStatus	read-create	create or delete ssm trasmit s1 setting clock
INT zxr10SSMTransS1CfgS1	1.3.6.1.4.1.3902.3.304.14.1.4	INTEGER	read-only	The S1 value for fixed transmitting.
zxr10SSMTransS1CfgTable	1.3.6.1.4.1.3902.3.304.14		not-accessible	A table containing SSM trasmit s1 information.
zxr10SSMWTRClk	1.3.6.1.4.1.3902.3.304.11
OCT zxr10SSMWTRClkIfName	1.3.6.1.4.1.3902.3.304.11.1	OCTET STRING	read-only	The interface name of the wtr sync clock,only write access is valid.
INT zxr10SSMWtrClkType	1.3.6.1.4.1.3902.3.304.11.2	INTEGER	read-only	The clock type of the wtr sync clock,only write access is valid.
INT zxr10SSMWTRFlag	1.3.6.1.4.1.3902.3.304.11.3	INTEGER	read-only	The flag of clear wtr sync clock,clear all or clear one clock. Only flag should be setted when clear all,when clear one clock, the all arrtibutions must be setted,only write access is valid.

RFC description

Manages Synchronization Status Messaging protocol for clock distribution and synchronization in telecom networks.

Start monitoring ZTE ZXR10 router/switch (SSM group/source-mapping config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-SSM-MIB

What Is ZXR10-SSM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description