ZXR10-DHCP-RELAY-SERVER-MIB

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZXR10-DHCP-RELAY-SERVER-MIB

Organization: ZTE Corporation

Last Updated: 2019-06-20

Category: ZTE ZXR10 Routing and Switching

Description: Manages ZTE ZXR10 router DHCP relay agent configuration and server address pool assignments.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-DHCP-RELAY-SERVER-MIB?

ZXR10-DHCP-RELAY-SERVER-MIB is a ZTE proprietary MIB for the ZXR10 router family (running the ROSNG 2.0 operating system) that manages DHCP relay agent behavior, including relay configuration and the server address pools the relay forwards client requests to. It exposes configuration objects for relay agent state and server-pool address assignment rather than physical hardware telemetry. Its monitoring value is primarily software/service-level: confirming that the DHCP relay process is enabled and correctly pointed at the intended DHCP server addresses, so client address-assignment failures can be traced to a relay misconfiguration. It relies conceptually on the IETF DHCP relay agent standard (RFC 3046) and the standard IP addressing model, though it is a ZTE-proprietary implementation. It is deployed on ZTE ZXR10 core/edge routers acting as DHCP relay agents in service-provider or enterprise networks. Engineers can download the ZXR10-DHCP-RELAY-SERVER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-DHCP-RELAY-SERVER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • ZTE ZXR10 router (ROSNG 2.0)

Monitoring Examples

No object/table names were supplied for this module, so specific object identifiers cannot be grounded here. In general, an administrator would check the relay's configured DHCP server address-pool entries against the addresses of the actual DHCP servers to confirm requests are being forwarded correctly. A relay agent shown as disabled or pointing to an unreachable server address would explain a spike in client DHCP timeout failures on that router.

What Can Be Monitored

  • DHCP relay agent enable state
  • configured DHCP server address pool
  • relay forwarding configuration
Imported Objects

From IPV6-TC

Ipv6Address

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
TruthValue
OIDs

RFC description

Configuration and monitoring of DHCP relay and server functionality on ZTE ROSNG routing platforms, including user connection statistics.

Start monitoring ZTE ZXR10 router (ROSNG 2.0) (DHCP-relay-agent/server-pool config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-DHCP-RELAY-SERVER-MIB