All MIBs › ZXR10-ALARM-MIB
Organization: ZTE Corp.
Last Updated: 2019-05-08
Category: ZTE ZXR10 Routing and Switching
Description: Monitors ZTE ZXR10 router active alarms, alarm history, and severity thresholds for fault management.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZXR10-ALARM-MIB?
ZXR10-ALARM-MIB is a ZTE Corp. (enterprise OID 3902) proprietary MIB reporting current-alarm state on ZXR10 routers. Its table, keyed by flow ID, records alarm code, class, type, level, status, occurred/disappeared time, TP (Termination Point) ID type/ID, parameter type/value, description, standard code, comment, network ID, global flow ID, updated time, threshold-alarm period/type/performance-value, return mode, and protection type. As a status MIB it lets an administrator review active alarm severity and root-cause detail on a ZTE ZXR10 router. It is deployed on ZTE Corp. ZXR10 router platforms (alarm management). Engineers can download the ZXR10-ALARM-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-ALARM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE Corp. ZXR10 router platforms (alarm management)
Monitoring Examples
An administrator checks curAlarmLevel and curAlarmDescription to review an active alarm's severity and root cause on a ZTE ZXR10 router.
What Can Be Monitored
- active alarm severity and root-cause detail
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-CONF
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zte | 1.3.6.1.4.1.3902 | |||
| zxr10 | 1.3.6.1.4.1.3902.3 | |||
| zxr10AlarmMIB | 1.3.6.1.4.1.3902.3.302 | The MIB module to describe the Alarm. | ||
| curAlarmTable | 1.3.6.1.4.1.3902.3.302.1 | not-accessible | A list of current Alarm entries. | |
| curAlarmEntry | 1.3.6.1.4.1.3902.3.302.1.1 | not-accessible | An entry containing management information applicable to a particular alarm. | |
| U32 curAlarmFlowID | 1.3.6.1.4.1.3902.3.302.1.1.1 | Unsigned32 | read-only | Current alarm Index. |
| I32 curAlarmCode | 1.3.6.1.4.1.3902.3.302.1.1.2 | Integer32 | read-only | Current alarm code. |
| ALA curAlarmClass | 1.3.6.1.4.1.3902.3.302.1.1.3 | AlarmClass | read-only | Current alarm class. |
| ALA curAlarmType | 1.3.6.1.4.1.3902.3.302.1.1.4 | AlarmType | read-only | Current alarm type. |
| ALA curAlarmLevel | 1.3.6.1.4.1.3902.3.302.1.1.5 | AlarmLevel | read-only | Current alarm level. |
| ALA curAlarmStatus | 1.3.6.1.4.1.3902.3.302.1.1.6 | AlarmStatus | read-only | Current alarm status. |
| U32 curAlarmOccuredTime | 1.3.6.1.4.1.3902.3.302.1.1.7 | Unsigned32 | read-only | Current alarm occured time, the time is relative to 1970-01-01 00:00:00. |
| U32 curAlarmDisappearedTime | 1.3.6.1.4.1.3902.3.302.1.1.8 | Unsigned32 | read-only | Current alarm disappeared time, the time is relative to 1970-01-01 00:00:00. |
| I32 curAlarmTPIDType | 1.3.6.1.4.1.3902.3.302.1.1.9 | Integer32 | read-only | Current alarm check point type. |
| TPI curAlarmTPID | 1.3.6.1.4.1.3902.3.302.1.1.10 | Tpid | read-only | Current alarm check point. |
| I32 curAlarmParaType | 1.3.6.1.4.1.3902.3.302.1.1.11 | Integer32 | read-only | Current alarm paratype, the alarm is sent by. |
| ALA curAlarmParaValue | 1.3.6.1.4.1.3902.3.302.1.1.12 | AlarmParaValue | read-only | Current alarm paravalue, the alarm is sent by. |
| ALA curAlarmDescription | 1.3.6.1.4.1.3902.3.302.1.1.13 | AlarmDescription | read-only | Current alarm description. |
| I32 curAlarmStdCode | 1.3.6.1.4.1.3902.3.302.1.1.14 | Integer32 | read-only | Current alarm standard code. |
| ALA curAlarmComment | 1.3.6.1.4.1.3902.3.302.1.1.15 | AlarmComment | read-only | Current alarm comment. |
| ALA curAlarmNetID | 1.3.6.1.4.1.3902.3.302.1.1.16 | AlarmNetID | read-only | Current alarm NetID. |
| U32 curAlarmGlobalFlowID | 1.3.6.1.4.1.3902.3.302.1.1.17 | Unsigned32 | read-only | Current alarm global index. |
| U32 curAlarmUpdatedTime | 1.3.6.1.4.1.3902.3.302.1.1.18 | Unsigned32 | read-only | Current alarm Updated time, the time is relative to 1970-01-01 00:00:00. |
| ALA curAlarmThAlmPeriod | 1.3.6.1.4.1.3902.3.302.1.1.19 | AlarmThAlmPeriod | read-only | Current alarm period. |
| ALA curAlarmThAlmType | 1.3.6.1.4.1.3902.3.302.1.1.20 | AlarmThAlmType | read-only | Current alarm threshold crossing type. |
| PER curAlarmThPerfValue | 1.3.6.1.4.1.3902.3.302.1.1.21 | PerfValue | read-only | Current alarm performance value. |
| ALA curAlarmReturnMode | 1.3.6.1.4.1.3902.3.302.1.1.22 | AlarmRevertType | read-only | Current alarm revert type. |
| ALA curAlarmProtectType | 1.3.6.1.4.1.3902.3.302.1.1.23 | AlarmProtectedType | read-only | Current alarm protected type. |
| ALA curAlarmSwitchReason | 1.3.6.1.4.1.3902.3.302.1.1.24 | AlarmSwitchReason | read-only | Current alarm switch reason. |
| ALA curAlarmUlPrtGroupWrkStat | 1.3.6.1.4.1.3902.3.302.1.1.25 | AlarmUlPrtGroupWrkStat | read-only | Current alarm protected group work status. |
| I32 curAlarmTPIDTypeSwitchFrom | 1.3.6.1.4.1.3902.3.302.1.1.26 | Integer32 | read-only | Which check point type switch from. |
| TPI curAlarmTPIDSwitchFrom | 1.3.6.1.4.1.3902.3.302.1.1.27 | Tpid | read-only | Which check point switch from. |
| I32 curAlarmTPIDTypeSwitchTo | 1.3.6.1.4.1.3902.3.302.1.1.28 | Integer32 | read-only | Which check point type switch to. |
| TPI curAlarmTPIDSwitchTo | 1.3.6.1.4.1.3902.3.302.1.1.29 | Tpid | read-only | Which check point switch to. |
| U32 curAlarmTimestamp | 1.3.6.1.4.1.3902.3.302.1.1.30 | Unsigned32 | read-only | Current alarm timestamp, corresponding to time, can fix an alarm with serial number when the device restarts. |
| U32 curAlarmTPIDLen | 1.3.6.1.4.1.3902.3.302.1.1.31 | Unsigned32 | read-only | The length of current alarm check point. |
| U32 curAlarmTPIDLenSwitchFrom | 1.3.6.1.4.1.3902.3.302.1.1.32 | Unsigned32 | read-only | The length of check point which switch from. |
| U32 curAlarmTPIDLenSwitchTo | 1.3.6.1.4.1.3902.3.302.1.1.33 | Unsigned32 | read-only | The length of check point which switch to. |
| U32 curAlarmOccuredMs | 1.3.6.1.4.1.3902.3.302.1.1.34 | Unsigned32 | read-only | Current alarm occured millisecond. |
| U32 curAlarmUpdatedMs | 1.3.6.1.4.1.3902.3.302.1.1.35 | Unsigned32 | read-only | Current alarm Updated millisecond. |
| U32 curAlarmDisappearedMs | 1.3.6.1.4.1.3902.3.302.1.1.36 | Unsigned32 | read-only | Current alarm disappeared millisecond. |
| ALA curAlarmNeedConfirm | 1.3.6.1.4.1.3902.3.302.1.1.37 | AlarmConfirmNeed | read-only | If the alarm need confirm. |
| hisAlarmTable | 1.3.6.1.4.1.3902.3.302.2 | not-accessible | A list of history alarm entries. | |
| hisAlarmEntry | 1.3.6.1.4.1.3902.3.302.2.1 | not-accessible | An entry containing management information applicable to a particular history alarm. | |
| U32 hisAlarmFlowID | 1.3.6.1.4.1.3902.3.302.2.1.1 | Unsigned32 | read-only | History alarm Index. |
| I32 hisAlarmCode | 1.3.6.1.4.1.3902.3.302.2.1.2 | Integer32 | read-only | History alarm code. |
| ALA hisAlarmClass | 1.3.6.1.4.1.3902.3.302.2.1.3 | AlarmClass | read-only | History alarm class. |
| ALA hisAlarmType | 1.3.6.1.4.1.3902.3.302.2.1.4 | AlarmType | read-only | History alarm type, 0:at-Communicationsalarm, 1:at-Qosalarm, 2:at-Equipmentalarm, 3:at-Processingerroralarm, 4:at-Environmentalalarm. |
| ALA hisAlarmLevel | 1.3.6.1.4.1.3902.3.302.2.1.5 | AlarmLevel | read-only | History alarm level. |
| ALA hisAlarmStatus | 1.3.6.1.4.1.3902.3.302.2.1.6 | AlarmStatus | read-only | History alarm status. |
| U32 hisAlarmOccuredTime | 1.3.6.1.4.1.3902.3.302.2.1.7 | Unsigned32 | read-only | History alarm occured time, the time is relative to 1970-01-01 00:00:00. |
| U32 hisAlarmDisappearedTime | 1.3.6.1.4.1.3902.3.302.2.1.8 | Unsigned32 | read-only | History alarm disappeared time, the time is relative to 1970-01-01 00:00:00. |
| I32 hisAlarmTPIDType | 1.3.6.1.4.1.3902.3.302.2.1.9 | Integer32 | read-only | History alarm check point type. |
| TPI hisAlarmTPID | 1.3.6.1.4.1.3902.3.302.2.1.10 | Tpid | read-only | History alarm check point. |
| I32 hisAlarmParaType | 1.3.6.1.4.1.3902.3.302.2.1.11 | Integer32 | read-only | History alarm paratype, the alarm is sent by. |
| ALA hisAlarmParaValue | 1.3.6.1.4.1.3902.3.302.2.1.12 | AlarmParaValue | read-only | History alarm paravalue, the alarm is sent by. |
| ALA hisAlarmDescription | 1.3.6.1.4.1.3902.3.302.2.1.13 | AlarmDescription | read-only | History alarm description. |
| I32 hisAlarmStdCode | 1.3.6.1.4.1.3902.3.302.2.1.14 | Integer32 | read-only | History alarm standard code. |
| ALA hisAlarmComment | 1.3.6.1.4.1.3902.3.302.2.1.15 | AlarmComment | read-only | History alarm comment. |
| ALA hisAlarmNetID | 1.3.6.1.4.1.3902.3.302.2.1.16 | AlarmNetID | read-only | History alarm NetID. |
| U32 hisAlarmGlobalFlowID | 1.3.6.1.4.1.3902.3.302.2.1.17 | Unsigned32 | read-only | History alarm global index. |
| U32 hisAlarmUpdatedTime | 1.3.6.1.4.1.3902.3.302.2.1.18 | Unsigned32 | read-only | History alarm Updated time, the time is relative to 1970-01-01 00:00:00. |
| ALA hisAlarmThAlmPeriod | 1.3.6.1.4.1.3902.3.302.2.1.19 | AlarmThAlmPeriod | read-only | History alarm period. |
| ALA hisAlarmThAlmType | 1.3.6.1.4.1.3902.3.302.2.1.20 | AlarmThAlmType | read-only | History alarm threshold crossing type. |
| PER hisAlarmThPerfValue | 1.3.6.1.4.1.3902.3.302.2.1.21 | PerfValue | read-only | History alarm performance value. |
| ALA hisAlarmReturnMode | 1.3.6.1.4.1.3902.3.302.2.1.22 | AlarmRevertType | read-only | History alarm revert type. |
| ALA hisAlarmProtectType | 1.3.6.1.4.1.3902.3.302.2.1.23 | AlarmProtectedType | read-only | History alarm protected type. |
| ALA hisAlarmSwitchReason | 1.3.6.1.4.1.3902.3.302.2.1.24 | AlarmSwitchReason | read-only | History alarm switch reason. |
| ALA hisAlarmUlPrtGroupWrkStat | 1.3.6.1.4.1.3902.3.302.2.1.25 | AlarmUlPrtGroupWrkStat | read-only | History alarm protected group work status. |
| I32 hisAlarmTPIDTypeSwitchFrom | 1.3.6.1.4.1.3902.3.302.2.1.26 | Integer32 | read-only | Which check point type switch from. |
| TPI hisAlarmTPIDSwitchFrom | 1.3.6.1.4.1.3902.3.302.2.1.27 | Tpid | read-only | Which check point switch from. |
| I32 hisAlarmTPIDTypeSwitchTo | 1.3.6.1.4.1.3902.3.302.2.1.28 | Integer32 | read-only | Which check point type switch to. |
| TPI hisAlarmTPIDSwitchTo | 1.3.6.1.4.1.3902.3.302.2.1.29 | Tpid | read-only | Which check point switch to. |
| U32 hisAlarmTimestamp | 1.3.6.1.4.1.3902.3.302.2.1.30 | Unsigned32 | read-only | History alarm timestamp, corresponding to time, can fix an alarm with serial number when the device restarts. |
| U32 hisAlarmTPIDLen | 1.3.6.1.4.1.3902.3.302.2.1.31 | Unsigned32 | read-only | The length of history alarm check point. |
| U32 hisAlarmTPIDLenSwitchFrom | 1.3.6.1.4.1.3902.3.302.2.1.32 | Unsigned32 | read-only | The length of check point which switch from. |
| U32 hisAlarmTPIDLenSwitchTo | 1.3.6.1.4.1.3902.3.302.2.1.33 | Unsigned32 | read-only | The length of check point which switch to. |
| U32 hisAlarmOccuredMs | 1.3.6.1.4.1.3902.3.302.2.1.34 | Unsigned32 | read-only | History alarm occured millisecond. |
| U32 hisAlarmUpdatedMs | 1.3.6.1.4.1.3902.3.302.2.1.35 | Unsigned32 | read-only | History alarm Updated millisecond. |
| U32 hisAlarmDisappearedMs | 1.3.6.1.4.1.3902.3.302.2.1.36 | Unsigned32 | read-only | History alarm disappeared millisecond. |
| notificationTable | 1.3.6.1.4.1.3902.3.302.6 | not-accessible | A list of notification entries. | |
| notificationEntry | 1.3.6.1.4.1.3902.3.302.6.1 | not-accessible | An entry containing management information applicable to a notification. | |
| U32 notificationFlowID | 1.3.6.1.4.1.3902.3.302.6.1.1 | Unsigned32 | read-only | Notification Index. |
| I32 notificationAlmCode | 1.3.6.1.4.1.3902.3.302.6.1.2 | Integer32 | read-only | Notification alarm code. |
| ALA notificationAlmType | 1.3.6.1.4.1.3902.3.302.6.1.3 | AlarmType | read-only | Notification alarm type. |
| ALA notificationAlmLevel | 1.3.6.1.4.1.3902.3.302.6.1.4 | AlarmLevel | read-only | Notification alarm level. |
| U32 notificationAlmOccuredTime | 1.3.6.1.4.1.3902.3.302.6.1.5 | Unsigned32 | read-only | Notification occured time, the time is relative to 1970-01-01 00:00:00. |
| I32 notificationTPIDType | 1.3.6.1.4.1.3902.3.302.6.1.6 | Integer32 | read-only | Notification check point type. |
| TPI notificationTPID | 1.3.6.1.4.1.3902.3.302.6.1.7 | Tpid | read-only | Notification check point. |
| I32 notificationAlmParaType | 1.3.6.1.4.1.3902.3.302.6.1.8 | Integer32 | read-only | Notification alarm paratype, the alarm is sent by. |
| ALA notificationAlmParaValue | 1.3.6.1.4.1.3902.3.302.6.1.9 | AlarmParaValue | read-only | Notification alarm paravalue, the alarm is sent by. |
| ALA notificationAlmDescription | 1.3.6.1.4.1.3902.3.302.6.1.10 | AlarmDescription | read-only | Notification alarm description. |
| I32 notificationAlmStdCode | 1.3.6.1.4.1.3902.3.302.6.1.11 | Integer32 | read-only | Notification alarm standard code. |
| ALA notificationAlmComment | 1.3.6.1.4.1.3902.3.302.6.1.12 | AlarmComment | read-only | Notification alarm comment. |
| ALA notificationAlmNetID | 1.3.6.1.4.1.3902.3.302.6.1.13 | AlarmNetID | read-only | Notification alarm netID. |
| U32 notificationTimestamp | 1.3.6.1.4.1.3902.3.302.6.1.14 | Unsigned32 | read-only | Notification timestamp, corresponding to time, can fix an alarm with serial number when the device restarts. |
| U32 notificationTPIDLen | 1.3.6.1.4.1.3902.3.302.6.1.15 | Unsigned32 | read-only | The length of notification check point. |
| U32 notificationAlmOccuredMs | 1.3.6.1.4.1.3902.3.302.6.1.16 | Unsigned32 | read-only | Notification occured millisecond. |
| ALA notificationNeedConfirm | 1.3.6.1.4.1.3902.3.302.6.1.17 | AlarmConfirmNeed | read-only | If the notification need confirm. |
| alarmTrap | 1.3.6.1.4.1.3902.3.302.8 | |||
| NTF curAlarmTrap | 1.3.6.1.4.1.3902.3.302.8.1 | When an alarm occurred, send the trap PDU to uniform network manager. Through the configuration command alarm trap-oid-expand, the trap OID can be expanded, adding alarm status and code. | ||
| NTF notificationTrap | 1.3.6.1.4.1.3902.3.302.8.3 | When a notification occurred, send the trap PDU to uniform network manager. Through the configuration command alarm trap-oid-expand, the trap OID can be expanded, adding notification status and code. | ||
| NTF heartbeatNotification | 1.3.6.1.4.1.3902.3.302.8.4 | Send a heart-beat trap when required. | ||
| NTF zxr10AlarmPreloadCancelTrap | 1.3.6.1.4.1.3902.3.302.8.5 | When an alarm preload canceled, send the trap PDU to uniform network manager. | ||
| alarmHeartBeatTable | 1.3.6.1.4.1.3902.3.302.9 | not-accessible | A list of heart-beat entries. | |
| alarmHeartBeatEntry | 1.3.6.1.4.1.3902.3.302.9.1 | not-accessible | An entry containing management information applicable to heart-beat. | |
| U32 alarmHeartBeatType | 1.3.6.1.4.1.3902.3.302.9.1.1 | Unsigned32 | read-only | Alarm heart-beat type. 0:snmp, 1:syslog, 2:ftp, 3:console, 4:all. |
| U32 alarmHeartBeatStart | 1.3.6.1.4.1.3902.3.302.9.1.2 | Unsigned32 | read-write | Alarm heart-beat start. 0:not send, 1:send. |
| U32 alarmHeartBeatPeriod | 1.3.6.1.4.1.3902.3.302.9.1.3 | Unsigned32 | read-write | Alarm heart-beat period. |
| alarmLevelTable | 1.3.6.1.4.1.3902.3.302.11 | not-accessible | A list of alarm level entries. | |
| alarmLevelEntry | 1.3.6.1.4.1.3902.3.302.11.1 | not-accessible | An alarm check point entry. | |
| U32 alarmLevelAlarmCode | 1.3.6.1.4.1.3902.3.302.11.1.1 | Unsigned32 | read-only | Alarm code. |
| ALA alarmLevel | 1.3.6.1.4.1.3902.3.302.11.1.2 | AlarmLevel | read-write | Alarm level. |
| globalAlarmTrapTable | 1.3.6.1.4.1.3902.3.302.12 | not-accessible | A list of global Alarm entries. | |
| globalAlarmTrapEntry | 1.3.6.1.4.1.3902.3.302.12.1 | not-accessible | An entry containing management information applicable to a particular alarm. | |
| U32 globalAlarmFlowID | 1.3.6.1.4.1.3902.3.302.12.1.1 | Unsigned32 | read-only | Global alarm Index. |
| I32 globalAlarmCode | 1.3.6.1.4.1.3902.3.302.12.1.2 | Integer32 | read-only | Global alarm code. |
| ALA globalAlarmClass | 1.3.6.1.4.1.3902.3.302.12.1.3 | AlarmClass | read-only | Global alarm class. |
| ALA globalAlarmType | 1.3.6.1.4.1.3902.3.302.12.1.4 | AlarmType | read-only | Global alarm type. |
| ALA globalAlarmLevel | 1.3.6.1.4.1.3902.3.302.12.1.5 | AlarmLevel | read-only | Global alarm level. |
| ALA globalAlarmStatus | 1.3.6.1.4.1.3902.3.302.12.1.6 | AlarmStatus | read-only | Global alarm status. |
| U32 globalAlarmOccuredTime | 1.3.6.1.4.1.3902.3.302.12.1.7 | Unsigned32 | read-only | Global alarm occured time, the time is relative to 1970-01-01 00:00:00. |
| U32 globalAlarmDisappearedTime | 1.3.6.1.4.1.3902.3.302.12.1.8 | Unsigned32 | read-only | Global alarm disappeared time, the time is relative to 1970-01-01 00:00:00. |
| I32 globalAlarmTPIDType | 1.3.6.1.4.1.3902.3.302.12.1.9 | Integer32 | read-only | Global alarm check point type. |
| TPI globalAlarmTPID | 1.3.6.1.4.1.3902.3.302.12.1.10 | Tpid | read-only | Global alarm check point. |
| I32 globalAlarmParaType | 1.3.6.1.4.1.3902.3.302.12.1.11 | Integer32 | read-only | Global alarm paratype, the alarm is sent by. |
| ALA globalAlarmParaValue | 1.3.6.1.4.1.3902.3.302.12.1.12 | AlarmParaValue | read-only | Global alarm paravalue, the alarm is sent by. |
| ALA globalAlarmDescription | 1.3.6.1.4.1.3902.3.302.12.1.13 | AlarmDescription | read-only | Global alarm description. |
| I32 globalAlarmStdCode | 1.3.6.1.4.1.3902.3.302.12.1.14 | Integer32 | read-only | Global alarm standard code. |
| U32 globalAlarmGlobalFlowID | 1.3.6.1.4.1.3902.3.302.12.1.17 | Unsigned32 | read-only | Global alarm global index. |
| U32 globalAlarmUpdatedTime | 1.3.6.1.4.1.3902.3.302.12.1.18 | Unsigned32 | read-only | Global alarm updated time, the time is relative to 1970-01-01 00:00:00. |
| ALA globalAlarmThAlmPeriod | 1.3.6.1.4.1.3902.3.302.12.1.19 | AlarmThAlmPeriod | read-only | Global alarm period. |
| ALA globalAlarmThAlmType | 1.3.6.1.4.1.3902.3.302.12.1.20 | AlarmThAlmType | read-only | Global alarm threshold crossing type. |
| PER globalAlarmThPerfValue | 1.3.6.1.4.1.3902.3.302.12.1.21 | PerfValue | read-only | Global alarm performance value. |
| ALA globalAlarmReturnMode | 1.3.6.1.4.1.3902.3.302.12.1.22 | AlarmRevertType | read-only | Global alarm revert type. |
| ALA globalAlarmProtectType | 1.3.6.1.4.1.3902.3.302.12.1.23 | AlarmProtectedType | read-only | Global alarm protected type. |
| ALA globalAlarmSwitchReason | 1.3.6.1.4.1.3902.3.302.12.1.24 | AlarmSwitchReason | read-only | Global alarm switch reason. |
| ALA globalAlarmUlPrtGroupWrkStat | 1.3.6.1.4.1.3902.3.302.12.1.25 | AlarmUlPrtGroupWrkStat | read-only | Global alarm protected group work status. |
| I32 globalAlarmTPIDTypeSwitchFrom | 1.3.6.1.4.1.3902.3.302.12.1.26 | Integer32 | read-only | Which check point type switch from. |
| TPI globalAlarmTPIDSwitchFrom | 1.3.6.1.4.1.3902.3.302.12.1.27 | Tpid | read-only | Which check point switch from. |
| I32 globalAlarmTPIDTypeSwitchTo | 1.3.6.1.4.1.3902.3.302.12.1.28 | Integer32 | read-only | Which check point type switch to. |
| TPI globalAlarmTPIDSwitchTo | 1.3.6.1.4.1.3902.3.302.12.1.29 | Tpid | read-only | Which check point switch to. |
| U32 globalAlarmTimestamp | 1.3.6.1.4.1.3902.3.302.12.1.30 | Unsigned32 | read-only | Global alarm timestamp, corresponding to time, can fix an alarm with serial number when the device restarts. |
| U32 globalAlarmTPIDLen | 1.3.6.1.4.1.3902.3.302.12.1.31 | Unsigned32 | read-only | The length of global alarm check point. |
| U32 globalAlarmTPIDLenSwitchFrom | 1.3.6.1.4.1.3902.3.302.12.1.32 | Unsigned32 | read-only | The length of check point which switch from. |
| U32 globalAlarmTPIDLenSwitchTo | 1.3.6.1.4.1.3902.3.302.12.1.33 | Unsigned32 | read-only | The length of check point which switch to. |
| U32 globalAlarmOccuredMs | 1.3.6.1.4.1.3902.3.302.12.1.34 | Unsigned32 | read-only | Global alarm occured millisecond. |
| U32 globalAlarmUpdatedMs | 1.3.6.1.4.1.3902.3.302.12.1.35 | Unsigned32 | read-only | Global alarm updated millisecond. |
| U32 globalAlarmDisappearedMs | 1.3.6.1.4.1.3902.3.302.12.1.36 | Unsigned32 | read-only | Global alarm disappeared millisecond. |
| alarmClearTable | 1.3.6.1.4.1.3902.3.302.13 | not-accessible | A list of alarm clear entries. | |
| alarmClearEntry | 1.3.6.1.4.1.3902.3.302.13.1 | not-accessible | An alarm clear entry. | |
| U32 alarmClearGlobalFlowID | 1.3.6.1.4.1.3902.3.302.13.1.1 | Unsigned32 | read-only | Alarm flowid. |
| I32 alarmClearStatus | 1.3.6.1.4.1.3902.3.302.13.1.2 | Integer32 | read-write | Alarm clear status. 0: the only value you can get, 1:set the value means to delete the instance. |
| alarmMaskTable | 1.3.6.1.4.1.3902.3.302.15 | not-accessible | A list of alarm mask entries. | |
| alarmMaskEntry | 1.3.6.1.4.1.3902.3.302.15.1 | not-accessible | An alarm mask entry. | |
| I32 alarmMaskTPIDType | 1.3.6.1.4.1.3902.3.302.15.1.1 | Integer32 | not-accessible | Alarm mask TPID type. Valid values range from 1 to 65534; 65535 is an invalid value. |
| TPI alarmMaskTPID | 1.3.6.1.4.1.3902.3.302.15.1.2 | Tpid | not-accessible | Alarm mask TPID. Length is 62 bytes. Valid and invalid values are filled in according to the check point specification. |
| OCT alarmMaskTPIDMask | 1.3.6.1.4.1.3902.3.302.15.1.3 | OCTET STRING | not-accessible | Each bit indicates whether the corresponding byte in alarmMaskTPID is valid. 1 is valid, 0 is invalid. |
| I32 alarmMaskAlarmCode | 1.3.6.1.4.1.3902.3.302.15.1.4 | Integer32 | not-accessible | Alarm code. |
| ROW alarmMaskRowStatus | 1.3.6.1.4.1.3902.3.302.15.1.100 | RowStatus | read-create | Row status. |
| zxr10AlarmGlobalObjects | 1.3.6.1.4.1.3902.3.302.16 | |||
| NUM zxr10AlarmPreloadInterface | 1.3.6.1.4.1.3902.3.302.16.1 | AlarmInterface | accessible-for-notify | The interface which canceled proload function. |
| alarmLevelChangeTable | 1.3.6.1.4.1.3902.3.302.17 | not-accessible | A list of alarm level entries. | |
| alarmLevelChangeEntry | 1.3.6.1.4.1.3902.3.302.17.1 | not-accessible | An alarm level entry. | |
| U32 alarmLevelChangeCode | 1.3.6.1.4.1.3902.3.302.17.1.1 | Unsigned32 | not-accessible | Alarm code. |
| U32 alarmLevelChangeTPIDType | 1.3.6.1.4.1.3902.3.302.17.1.2 | Unsigned32 | not-accessible | TPID Type. |
| ALA alarmLevelChangeLevel | 1.3.6.1.4.1.3902.3.302.17.1.3 | AlarmLevel | read-create | Alarm level support 'emergency','alert','critical','error', 'warning','notification','information','debugging'.Alarm level not support 'all'. |
| ROW alarmLevelChangeRowStatus | 1.3.6.1.4.1.3902.3.302.17.1.100 | RowStatus | read-create | Row status. |
| alarmShieldTable | 1.3.6.1.4.1.3902.3.302.18 | not-accessible | A list of alarm shield entries. | |
| alarmShieldEntry | 1.3.6.1.4.1.3902.3.302.18.1 | not-accessible | An alarm shield entry. | |
| U32 alarmShieldAlarmCode | 1.3.6.1.4.1.3902.3.302.18.1.1 | Unsigned32 | not-accessible | Alarm code. |
| U32 alarmShieldBegintime | 1.3.6.1.4.1.3902.3.302.18.1.2 | Unsigned32 | not-accessible | Alarm begin time. |
| U32 alarmShieldEndtime | 1.3.6.1.4.1.3902.3.302.18.1.3 | Unsigned32 | not-accessible | Alarm end time. |
| ALA alarmShieldType | 1.3.6.1.4.1.3902.3.302.18.1.4 | AlarmType | not-accessible | Alarm type. |
| ALA alarmShieldLevel | 1.3.6.1.4.1.3902.3.302.18.1.5 | AlarmLevel | not-accessible | Alarm level. |
| ROW alarmShieldRowStatus | 1.3.6.1.4.1.3902.3.302.18.1.100 | RowStatus | read-create | Row status. |
| zxr10AlarmMaskTable | 1.3.6.1.4.1.3902.3.302.19 | not-accessible | A list of alarm mask entries. | |
| zxr10AlarmMaskEntry | 1.3.6.1.4.1.3902.3.302.19.1 | not-accessible | An alarm mask entry. | |
| I32 zxr10AlarmMaskTPIDType | 1.3.6.1.4.1.3902.3.302.19.1.1 | Integer32 | not-accessible | Alarm mask TPID type. |
| TPI zxr10AlarmMaskTPID | 1.3.6.1.4.1.3902.3.302.19.1.2 | Tpid | not-accessible | Alarm mask TPID. Length is from 62 to 128 bytes. Valid and invalid values are filled in according to the check point specification. |
| OCT zxr10AlarmMaskTPIDMask | 1.3.6.1.4.1.3902.3.302.19.1.3 | OCTET STRING | not-accessible | Each bit indicates whether the corresponding byte in alarmMaskTPID is valid. 1 is valid, 0 is invalid. |
| I32 zxr10AlarmMaskAlarmCode | 1.3.6.1.4.1.3902.3.302.19.1.4 | Integer32 | not-accessible | Alarm code. |
| ALA zxr10AlarmMaskTPIDClass | 1.3.6.1.4.1.3902.3.302.19.1.5 | AlarmTPIDClass | not-accessible | Alarm TPID class. |
| I32 zxr10AlarmMaskTPIDLen | 1.3.6.1.4.1.3902.3.302.19.1.6 | Integer32 | not-accessible | Alarm TPID length. Valid value range is from 62 to 128. |
| ROW zxr10AlarmMaskRowStatus | 1.3.6.1.4.1.3902.3.302.19.1.100 | RowStatus | read-create | Row status. |
| alarmHeartBeatGlobalObjects | 1.3.6.1.4.1.3902.3.302.20 | |||
| U32 alarmHeartBeatNotification | 1.3.6.1.4.1.3902.3.302.20.1 | Unsigned32 | read-write | Alarm heart-beat notification report. 1:enable, 2:disable. |
| zxr10AlmShdProfTable | 1.3.6.1.4.1.3902.3.302.21 | not-accessible | A list of alarm shield profile entries. | |
| zxr10AlmShdProfEntry | 1.3.6.1.4.1.3902.3.302.21.1 | not-accessible | An alarm shield profile entry. | |
| PRO zxr10AlmShdProfName | 1.3.6.1.4.1.3902.3.302.21.1.1 | ProfileName | not-accessible | Alarm shield profile name. |
| ROW zxr10AlmShdProfRowStatus | 1.3.6.1.4.1.3902.3.302.21.1.100 | RowStatus | read-create | Row status. |
| zxr10AlmShdProfCodeTable | 1.3.6.1.4.1.3902.3.302.22 | not-accessible | A list of alarm shield profile alarm code entries. | |
| zxr10AlmShdProfCodeEntry | 1.3.6.1.4.1.3902.3.302.22.1 | not-accessible | An alarm shield profile alarm code entry. | |
| U32 zxr10AlmShdProfCodeAlmCode | 1.3.6.1.4.1.3902.3.302.22.1.1 | Unsigned32 | not-accessible | Alarm code. |
| PRO zxr10AlmShdProfCodeStatus | 1.3.6.1.4.1.3902.3.302.22.1.2 | ProfileStatus | read-create | Alarm shield profile status. 1:forever 2:once |
| ALA zxr10AlmProfLevelChange | 1.3.6.1.4.1.3902.3.302.22.1.3 | AlarmLevel | read-create | Alarm level support 'emergency','alert','critical','error', 'warning','notification','information','debugging'.Alarm level not support 'all'. |
| ROW zxr10AlmShdProfCodeRowStatus | 1.3.6.1.4.1.3902.3.302.22.1.100 | RowStatus | read-create | Row status. |
| zxr10AlmShdProfApplyTable | 1.3.6.1.4.1.3902.3.302.23 | not-accessible | A list of alarm shield profile apply entries. | |
| zxr10AlmShdProfApplyEntry | 1.3.6.1.4.1.3902.3.302.23.1 | not-accessible | An alarm shield profile apply entry. | |
| PRO zxr10AlmShdProfApplyFlag | 1.3.6.1.4.1.3902.3.302.23.1.1 | ProfileApplyFlag | not-accessible | Alarm shield profile apply flag. 1:system 2:board 3:interface |
| OCT zxr10AlmShdProfApplyBrdName | 1.3.6.1.4.1.3902.3.302.23.1.2 | OCTET STRING | not-accessible | Alarm shield profile apply board name. |
| OCT zxr10AlmShdProfApplyIfName | 1.3.6.1.4.1.3902.3.302.23.1.3 | OCTET STRING | not-accessible | Alarm shield profile apply interface name. |
| ROW zxr10AlmShdProfApplyRowStatus | 1.3.6.1.4.1.3902.3.302.23.1.100 | RowStatus | read-create | Row status. |
| zxr10AlmTrapConfirmCfg | 1.3.6.1.4.1.3902.3.302.24 | |||
| INT zxr10AlmConfirmEnable | 1.3.6.1.4.1.3902.3.302.24.1 | INTEGER | read-write | Enable or disable the alarm confirm. |
| INT zxr10AlmConfirmTimeout | 1.3.6.1.4.1.3902.3.302.24.2 | INTEGER | read-write | Specifies the time-out value, in seconds, for an event to be confirmed.It must be set with zxr10AlmResendingTimes together. |
| I32 zxr10AlmResendingTimes | 1.3.6.1.4.1.3902.3.302.24.3 | Integer32 | read-write | The resending event times when device does not receive the event confirm message from the snmp manager. It must be set with zxr10AlmConfirmTimeout together. |
| zxr10AlmTrapConfirmOpt | 1.3.6.1.4.1.3902.3.302.25 | |||
| I32 zxr10AlmConfirmFlowId | 1.3.6.1.4.1.3902.3.302.25.1 | Integer32 | read-write | The cleard Flow Id to be confirmed by a snmp manager. When a manager receive a trap with confirmation information, then the manager should set this mib object to inform the agent that this manager has got this event.And then the agent should remove this event from a unconfirmed event queue. It must be set with zxr10AlmConfirmAlarmStatus together. |
| INT zxr10AlmConfirmAlarmStatus | 1.3.6.1.4.1.3902.3.302.25.2 | INTEGER | read-write | The alarm status of the event to be confirmed. |
| zxr10AlmClearRange | 1.3.6.1.4.1.3902.3.302.26 | |||
| U32 zxr10AlmClearBeginFlowID | 1.3.6.1.4.1.3902.3.302.26.1 | Unsigned32 | read-write | The clear begin flow ID, it must be no larger than the end flow ID. 0: the only value you can get. |
| U32 zxr10AlmClearEndFlowID | 1.3.6.1.4.1.3902.3.302.26.2 | Unsigned32 | read-write | The clear end flow ID, it must be no less than the begin flow ID. 0: the only value you can get. |
| I32 zxr10AlmClearRangeStatus | 1.3.6.1.4.1.3902.3.302.26.3 | Integer32 | read-write | Alarm clear status. 0: the only value you can get, 1:set the value means to delete the instance. zxr10AlmClearRangeStatus must be set with zxr10AlmClearBeginFlowID and zxr10AlmClearEndFlowID together. The clear range number must be less than or equal to 100. When a manager receive the clear range oprateion, the current alarms in the range will report disappear. |
RFC description
Manages alarms and notifications on ZTE ZXR10 network equipment.
Start monitoring ZTE Corp. ZXR10 router platforms (alarm management) (active-alarm severity/root-cause status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.