ZTE-AN-PON-SERVICE-MIB

All MIBs › ZTE-AN-PON-SERVICE-MIB

Organization: ZTE Corporation

Last Updated: 2012-02-27

Category: ZTE Access Node (ZTE-AN) Management

Description: Covers PON service provisioning on ZTE access nodes, including T-CONTs, GEM ports, and traffic profiles.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-AN-PON-SERVICE-MIB?

ZTE-AN-PON-SERVICE-MIB is a ZTE Corporation proprietary MIB (ZXR10/ZXROS platform family) implementing PON service provisioning (ONU separation profiles and IP address pools) on ZTE access-network equipment on ZTE ZXR10 carrier routers/switches. Its objects cover reported capabilities, an ONU-separation-profile table (PON type, profile type/name/ID, operation, status, progress) with a related configuration-status table, and an IP-pool table (name, start/end address and type, prefix length). As a configuration/status MIB it lets an administrator audit and monitor PON service provisioning (ONU separation profiles and IP address pools) on ZTE access-network equipment on a ZXR10 platform. It is deployed on ZTE ZXR10 carrier routers/switches. Engineers can download the ZTE-AN-PON-SERVICE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-PON-SERVICE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 carrier routers/switches

Monitoring Examples

An administrator reviews this MIB's objects to confirm PON service provisioning (ONU separation profiles and IP address pools) on ZTE access-network equipment is configured and operating as expected on a ZTE ZXR10 platform.

What Can Be Monitored

PON service provisioning (ONU separation profiles and IP address pools) on ZTE access-network equipment

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus

From ZTE-AN-PON-BASE-MIB

zxAnPonOnuIndex

OBJECT-TYPE

From ZTE-AN-PON-PERF-MIB

zxAnPonOltIfRxPkts

OBJECT-TYPE

From ZTE-AN-SMI

zxAnPon

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxAnPonSrvMib	1.3.6.1.4.1.3902.1082.500.2			The MIB module for the management of PON service.
zxAnPonSrvGlobalObjects	1.3.6.1.4.1.3902.1082.500.2.1
BIT zxAnPonSrvCapabilities	1.3.6.1.4.1.3902.1082.500.2.1.2	Bits	read-only	The PON capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means adding the following attributes to the zxAnPonSrvVndBindOnuRuleTable: zxAnPonSrvVndBindOnuRuleType, zxAnPonSrvVndBindOnuPwd, zxAnPonSrvVndBindOnuPsk, zxAnPonSrvVndBindOnuRid, zxAnPonSrvVndBindOnuLoidPwd. NOTE: No recommended to display it in NMS.
zxAnPonSrvObjects	1.3.6.1.4.1.3902.1082.500.2.2
zxAnPonSrvOnuProfileObjects	1.3.6.1.4.1.3902.1082.500.2.2.1
zxAnPonSrvOnuSepProfileTable	1.3.6.1.4.1.3902.1082.500.2.2.1.4		not-accessible	PON ONU separation profile table.
zxAnPonSrvOnuSepProfileEntry	1.3.6.1.4.1.3902.1082.500.2.2.1.4.1		not-accessible	PON ONU separation profile Entry.
INT zxAnPonSrvOnuSepPrfPonType	1.3.6.1.4.1.3902.1082.500.2.2.1.4.1.1	INTEGER	not-accessible	PON type.
INT zxAnPonSrvOnuSepPrfType	1.3.6.1.4.1.3902.1082.500.2.2.1.4.1.2	INTEGER	not-accessible	PON ONU separation profile type.
STR zxAnPonSrvOnuSepPrfName	1.3.6.1.4.1.3902.1082.500.2.2.1.4.1.3	DisplayString	not-accessible	PON ONU separation profile name.
I32 zxAnPonSrvOnuSepPrfId	1.3.6.1.4.1.3902.1082.500.2.2.1.4.1.4	Integer32	read-only	PON ONU separation profile ID.
INT zxAnPonSrvOnuSepPrfOperation	1.3.6.1.4.1.3902.1082.500.2.2.1.4.1.5	INTEGER	read-create	PON ONU separation profile operation. -commit: commit ONU separation profile's modification. -rollback: revert ONU separation profile's modification.
INT zxAnPonSrvOnuSepPrfStatus	1.3.6.1.4.1.3902.1082.500.2.2.1.4.1.6	INTEGER	read-only	The current status of PON ONU separation profile. -normal: profile has been applied. -modifiedButNotApplied: profile has been modified but not applied. -committing: profile is committing. -rollbacking: profile is rollbacking.
I32 zxAnPonSrvOnuSepPrfOperProgress	1.3.6.1.4.1.3902.1082.500.2.2.1.4.1.7	Integer32	read-only	The percent of PON ONU separation profile operation.
ROW zxAnPonSrvOnuSepPrfRowStatus	1.3.6.1.4.1.3902.1082.500.2.2.1.4.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
zxAnPonSrvOnuSepPrfConfTable	1.3.6.1.4.1.3902.1082.500.2.2.1.5		not-accessible	PON ONU separation profile configuration table.
zxAnPonSrvOnuSepPrfConfEntry	1.3.6.1.4.1.3902.1082.500.2.2.1.5.1		not-accessible	PON ONU separation profile configuration entry.
STR zxAnPonSrvOnuSepPrfConfPrfName	1.3.6.1.4.1.3902.1082.500.2.2.1.5.1.1	DisplayString	read-create	PON ONU separation profile name.
INT zxAnPonSrvOnuSepPrfConfStatus	1.3.6.1.4.1.3902.1082.500.2.2.1.5.1.2	INTEGER	read-only	PON ONU separation profile configuration status.
I32 zxAnPonSrvOnuSepPrfConfFailRsn	1.3.6.1.4.1.3902.1082.500.2.2.1.5.1.3	Integer32	read-only	Failed reason of PON ONU separation profile configuration. Value 0 indicates no error and other value indicates the error code.
ROW zxAnPonSrvOnuSepPrfConfRowStatus	1.3.6.1.4.1.3902.1082.500.2.2.1.5.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
zxAnPonSrvIpObjects	1.3.6.1.4.1.3902.1082.500.2.2.2
zxAnPonSrvIpPoolTable	1.3.6.1.4.1.3902.1082.500.2.2.2.2		not-accessible	PON IP pool to be bound to a PON port.
zxAnPonSrvIpPoolEntry	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1		not-accessible	It is entry in the zxAnPonSrvIpPoolTable.
STR zxAnPonSrvIpPoolName	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1.1	DisplayString	not-accessible	PON IP pool Name.
IPt zxAnPonSrvIpPoolStartAddrType	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1.2	InetAddressType	read-create	The type of IP address denoted in zxAnPonSrvIpPoolStartAddr object.
IP zxAnPonSrvIpPoolStartAddr	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1.3	InetAddress	read-create	PON IP pool start address.
IPt zxAnPonSrvIpPoolEndAddrType	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1.4	InetAddressType	read-create	The type of IP address denoted in zxAnPonSrvIpPoolEndAddr object.
IP zxAnPonSrvIpPoolEndAddr	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1.5	InetAddress	read-create	PON IP pool end address.
ADR zxAnPonSrvIpPoolAddrPfxLen	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1.6	InetAddressPrefixLength	read-create	PON IP pool mask.
I32 zxAnPonSrvIpPoolPri	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1.7	Integer32	read-create	PON IP pool priority.
I32 zxAnPonSrvIpPoolCVid	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1.8	Integer32	read-create	PON IP pool CVLAN.
I32 zxAnPonSrvIpPoolSVid	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1.9	Integer32	read-create	PON IP pool SVLAN. 0 or not specified means that there's no SVLAN.
IPt zxAnPonSrvIpPoolNetAddrType	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1.10	InetAddressType	read-create	The type of IP address denoted in zxAnPonSrvIpPoolNetAddr object.
IP zxAnPonSrvIpPoolNetAddr	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1.11	InetAddress	read-create	PON IP pool network IP.
ADR zxAnPonSrvIpPoolNetAddrPfxLen	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1.12	InetAddressPrefixLength	read-create	PON IP pool net mask.
IPt zxAnPonSrvIpPoolNetGatewayType	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1.13	InetAddressType	read-create	The type of IP address denoted in zxAnPonSrvIpPoolNetGateway object.
IP zxAnPonSrvIpPoolNetGateway	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1.14	InetAddress	read-create	PON IP pool gateway.
I32 zxAnPonSrvIpPoolUsage	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1.15	Integer32	read-only	The current usage of this IP pool.
ROW zxAnPonSrvIpPoolRowStatus	1.3.6.1.4.1.3902.1082.500.2.2.2.2.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
zxAnPonSrvIpPoolBindTable	1.3.6.1.4.1.3902.1082.500.2.2.2.3		not-accessible	PON port associated with IP pool.
zxAnPonSrvIpPoolBindEntry	1.3.6.1.4.1.3902.1082.500.2.2.2.3.1		not-accessible	It is entry in the zxAnPonSrvIpPoolBindTable
STR zxAnPonSrvBindIpPoolName	1.3.6.1.4.1.3902.1082.500.2.2.2.3.1.1	DisplayString	read-create	PON IP pool Name which will be bound to PON port. Refers to zxAnPonSrvIpPoolName.
ROW zxAnPonSrvBindIpPoolRowStatus	1.3.6.1.4.1.3902.1082.500.2.2.2.3.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
zxAnPonSrvOnuMgmtIp2Table	1.3.6.1.4.1.3902.1082.500.2.2.2.6		not-accessible	ONU inband management channel IP configuration table. This table is only used for C600 serial.
zxAnPonSrvOnuMgmtIp2Entry	1.3.6.1.4.1.3902.1082.500.2.2.2.6.1		not-accessible	ONU inband management channel IP configuration entry. The index 'zxAnPonSrvOnuIndex' represents the normal ONU index.
IPt zxAnPonSrvOnuMgmtIp2IpAddrType	1.3.6.1.4.1.3902.1082.500.2.2.2.6.1.1	InetAddressType	read-create	The type of IP address denoted in zxAnPonSrvOnuMgmtIp2IpAddr object.
IP zxAnPonSrvOnuMgmtIp2IpAddr	1.3.6.1.4.1.3902.1082.500.2.2.2.6.1.2	InetAddress	read-create	IP address of management channel.
ADR zxAnPonSrvOnuMgmtIp2IpPfxLen	1.3.6.1.4.1.3902.1082.500.2.2.2.6.1.3	InetAddressPrefixLength	read-create	IP address prefix length of management channel.
I32 zxAnPonSrvOnuMgmtIp2Pri	1.3.6.1.4.1.3902.1082.500.2.2.2.6.1.4	Integer32	read-create	802.1p priority of management channel.
I32 zxAnPonSrvOnuMgmtIp2CVid	1.3.6.1.4.1.3902.1082.500.2.2.2.6.1.5	Integer32	read-create	CVLAN of management channel.
I32 zxAnPonSrvOnuMgmtIp2SVid	1.3.6.1.4.1.3902.1082.500.2.2.2.6.1.6	Integer32	read-create	SVLAN of management channel. 0 or not specified means that there's no SVLAN.
IPt zxAnPonSrvOnuMgmtIp2NetAddrType	1.3.6.1.4.1.3902.1082.500.2.2.2.6.1.7	InetAddressType	read-create	The type of IP address denoted in zxAnPonSrvOnuMgmtIp2NetAddr object.
IP zxAnPonSrvOnuMgmtIp2NetAddr	1.3.6.1.4.1.3902.1082.500.2.2.2.6.1.8	InetAddress	read-create	The subnet IP address of the route for management channel.
ADR zxAnPonSrvOnuMgmtIp2NetPfxLen	1.3.6.1.4.1.3902.1082.500.2.2.2.6.1.9	InetAddressPrefixLength	read-create	The subnet IP address prefix length of the route for management channel.
IPt zxAnPonSrvOnuMgmtIp2NetGwIpType	1.3.6.1.4.1.3902.1082.500.2.2.2.6.1.10	InetAddressType	read-create	The type of IP address denoted in zxAnPonSrvOnuMgmtIp2NetGwIp object.
IP zxAnPonSrvOnuMgmtIp2NetGwIp	1.3.6.1.4.1.3902.1082.500.2.2.2.6.1.11	InetAddress	read-create	The gateway IP address of the route for management channel.
ROW zxAnPonSrvOnuMgmtIp2RowStatus	1.3.6.1.4.1.3902.1082.500.2.2.2.6.1.50	RowStatus	read-create	The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables usage rules in 'zxAnPonSrvOnuMgmtIp2Table' description. To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
zxAnPonSrvOnuBlacklistObjects	1.3.6.1.4.1.3902.1082.500.2.2.3
zxAnPonSrvOnuBlacklistTable	1.3.6.1.4.1.3902.1082.500.2.2.3.2		not-accessible	PON interface ONU blacklist table.
zxAnPonSrvOnuBlacklistEntry	1.3.6.1.4.1.3902.1082.500.2.2.3.2.1		not-accessible	PON interface ONU blacklist entry.
I32 zxAnPonSrvOnuBlacklistIndex	1.3.6.1.4.1.3902.1082.500.2.2.3.2.1.1	Integer32	not-accessible	Index of the ONU blacklist,and each PON interface allows to set 8 entries in all.
OCT zxAnPonSrvOnuBlacklistAuthInfo	1.3.6.1.4.1.3902.1082.500.2.2.3.2.1.2	OCTET STRING	read-create	This attribute identifies the ONU SN or MAC, with which ONU will be added into or deleted from the blacklist. zxAnPonSrvOnuBlacklistAuthInfo should be 8 octets serial number for GPON or 6 octets MAC address for EPON.
ROW zxAnPonSrvOnuBlacklistRowStatus	1.3.6.1.4.1.3902.1082.500.2.2.3.2.1.50	RowStatus	read-create	The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnPonSrvOnuBlacklistAuthInfo have been set. To delete a row in this table, a manager must set this object to destroy(6).
zxAnPonSrvOnuResObjects	1.3.6.1.4.1.3902.1082.500.2.2.4
zxAnPonSrvOnuIdResTable	1.3.6.1.4.1.3902.1082.500.2.2.4.2		not-accessible	xPON interface onu ID resource table
zxAnPonSrvOnuIdResEntry	1.3.6.1.4.1.3902.1082.500.2.2.4.2.1		not-accessible	Entry of zxAnPonSrvOnuIdResTable. The index 'ifIndex' represents the normal OLT index.
OID zxAnPonSrvConfiguredOnuIdList	1.3.6.1.4.1.3902.1082.500.2.2.4.2.1.1	OBJECT IDENTIFIER	read-only	The configured ONU ID list of the PON port. The format is ..*. For example, 1.2.5.7.
OCT zxAnPonSrvConfiguredOnuIds	1.3.6.1.4.1.3902.1082.500.2.2.4.2.1.2	OCTET STRING	read-only	The configured ONU ID list of the PON port. Each two bytes represent an ONU ID.
zxAnPonSrvWhitelistObjects	1.3.6.1.4.1.3902.1082.500.2.2.5
zxAnPonSrvWhitelistTable	1.3.6.1.4.1.3902.1082.500.2.2.5.2		not-accessible	PON whitelist table.
zxAnPonSrvWhitelistEntry	1.3.6.1.4.1.3902.1082.500.2.2.5.2.1		not-accessible	PON whitelist entry.
INT zxAnPonSrvWhitelistType	1.3.6.1.4.1.3902.1082.500.2.2.5.2.1.1	INTEGER	not-accessible	Whitelist type.
STR zxAnPonSrvWhitelistRule	1.3.6.1.4.1.3902.1082.500.2.2.5.2.1.2	DisplayString	not-accessible	PON whitelist rule. Whitelist rule can be a specified SN/MAC or SN/MAC range(GPON uses SN, EPON uses MAC). '' or '[begin-end]' can be used in SN/MAC string to represent a range. Each '' or '[begin-end]' represents only one legal character of the whiltelist rule. '' represents all legal characters, in MAC it represents '0' to 'f', in SN it represents '0' to '9'. For example: GPON SN ZTEG0001000[1-9] represents ZTEG00010001 to ZTEG00010009; ZTEG0001000 represents ZTEG00010000 to ZTEG00010009; ZTEG000100 represents ZTEG00010000 to ZTEG00010099; EPON MAC 00d0d02505 represents 00d0d0250500 to 00d0d02505ff. 00d0d02505[1-7]* represents 00d0d0250510 to 00d0d025057f.
ROW zxAnPonSrvWhitelistRowStatus	1.3.6.1.4.1.3902.1082.500.2.2.5.2.1.50	RowStatus	read-create	The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6).
zxAnPonSrvPlugAndPlayObjects	1.3.6.1.4.1.3902.1082.500.2.2.6
zxAnPonSrvPlugAndPlayTable	1.3.6.1.4.1.3902.1082.500.2.2.6.2		not-accessible	PON plug and play configuration table. The index of this table is PON port.
zxAnPonSrvPlugAndPlayEntry	1.3.6.1.4.1.3902.1082.500.2.2.6.2.1		not-accessible	PON plug and play configuration entry.
INT zxAnPonSrvPlugAndPlayEnable	1.3.6.1.4.1.3902.1082.500.2.2.6.2.1.1	INTEGER	read-write	The plug and play status of PON port. enabled(1) -- enable plug and play of PON port. disabled(2) -- disable plug and play of PON port.
INT zxAnPonSrvPnpReplacingEnable	1.3.6.1.4.1.3902.1082.500.2.2.6.2.1.2	INTEGER	read-write	The plug and play replacing status of PON port. enabled(1) -- enable plug and play replacing of PON port. disabled(2) -- disable plug and play replacing of PON port. This attribute is valid when zxAnPonSrvPlugAndPlayEnable is enabled.
zxAnPonSrvOnuPlugAndPlayTable	1.3.6.1.4.1.3902.1082.500.2.2.6.3		not-accessible	ONU plug and play configuration table.
zxAnPonSrvOnuPlugAndPlayEntry	1.3.6.1.4.1.3902.1082.500.2.2.6.3.1		not-accessible	ONU plug and play configuration entry.
INT zxAnPonSrvOnuPnpReplacingEnable	1.3.6.1.4.1.3902.1082.500.2.2.6.3.1.1	INTEGER	read-write	The plug and play replacing status of ONU. enabled(1) -- enable plug and play replacing of ONU. disabled(2) -- disable plug and play replacing of ONU. This attribute is valid when zxAnPonSrvPnpReplacingEnable is enabled.
zxAnPonSrvDbaObjects	1.3.6.1.4.1.3902.1082.500.2.2.7
zxAnPonSrvDbaInfoTable	1.3.6.1.4.1.3902.1082.500.2.2.7.2		not-accessible	PON port DBA(dynamic bandwidth allocation) information table. The 'IfType' of ifIndex supports 1(physical interface) and 5(PON channel).
zxAnPonSrvDbaInfoEntry	1.3.6.1.4.1.3902.1082.500.2.2.7.2.1		not-accessible	PON port DBA information entry.
I32 zxAnPonSrvDbaUsedBw	1.3.6.1.4.1.3902.1082.500.2.2.7.2.1.1	Integer32	read-only	The total used DBA bandwidth of this PON port.
I32 zxAnPonSrvDbaAvailableBw	1.3.6.1.4.1.3902.1082.500.2.2.7.2.1.2	Integer32	read-only	The total available DBA bandwidth of this PON port.
INT zxAnPonSrvDbaOverflowStatus	1.3.6.1.4.1.3902.1082.500.2.2.7.2.1.3	INTEGER	read-only	The DBA bandwidth overflow status of this PON port. normal(1) indicates the DBA bandwidth is normal. overflowed(2) indicates the DBA bandwidth has overflowed.
I32 zxAnPonSrvDbaOverflowBw	1.3.6.1.4.1.3902.1082.500.2.2.7.2.1.4	Integer32	read-only	The overflow bandwidth of this PON port.
zxAnPonSrvPonPortObjects	1.3.6.1.4.1.3902.1082.500.2.2.8
zxAnPonSrvPonPortTable	1.3.6.1.4.1.3902.1082.500.2.2.8.2		not-accessible	The OLT PON port table.
zxAnPonSrvPonPortEntry	1.3.6.1.4.1.3902.1082.500.2.2.8.2.1		not-accessible	The OLT PON port entry.
STR zxAnPonSrvPonPortName	1.3.6.1.4.1.3902.1082.500.2.2.8.2.1.1	DisplayString	accessible-for-notify	The name of the OLT PON port.
I32 zxAnPonSrvPonPFiberMinDistance	1.3.6.1.4.1.3902.1082.500.2.2.8.2.1.2	Integer32	read-write	The minimum value of the fiber distance. The configuration step size is 10km. This attribute is only supported by C600 serial GPON.
I32 zxAnPonSrvPonPFiberMaxDistance	1.3.6.1.4.1.3902.1082.500.2.2.8.2.1.3	Integer32	read-write	The maximum value of the fiber distance. The configuration step size is 10km. This attribute is only supported by C600 serial.
I32 zxAnPonSrvPonPUnConfOnuAgingTime	1.3.6.1.4.1.3902.1082.500.2.2.8.2.1.4	Integer32	read-write	The aging time of the unconfigured ONU.
INT zxAnPonSrvPonPReset	1.3.6.1.4.1.3902.1082.500.2.2.8.2.1.5	INTEGER	read-write	Reset the OLT PON port.
zxAnPonSrvChannelObjects	1.3.6.1.4.1.3902.1082.500.2.2.9
zxAnPonSrvChannelTable	1.3.6.1.4.1.3902.1082.500.2.2.9.2		not-accessible	The OLT PON port channel table.
zxAnPonSrvChannelEntry	1.3.6.1.4.1.3902.1082.500.2.2.9.2.1		not-accessible	The OLT PON port channel entry.
I32 zxAnPonSrvChannelId	1.3.6.1.4.1.3902.1082.500.2.2.9.2.1.1	Integer32	not-accessible	The OLT PON port channel ID.
INT zxAnPonSrvChannelType	1.3.6.1.4.1.3902.1082.500.2.2.9.2.1.2	INTEGER	read-only	The OLT PON port channel ID type. gpon(1): it indicates the GPON. xgpon1(2): it indicates the XG-PON1. xgspon(3): it indicates the XGS-PON. epon(11): it indicates the EPON. tenGEpon(12): it indicates the 10G EPON.
zxAnPonSrvUnconfOnuObjects	1.3.6.1.4.1.3902.1082.500.2.2.11
zxAnPonSrvUnconfOnuTable	1.3.6.1.4.1.3902.1082.500.2.2.11.2		not-accessible	The PON unconfigured ONU table. This table is only supported by C600 serial.
zxAnPonSrvUnconfOnuEntry	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1		not-accessible	The PON unconfigured ONU entry.
I32 zxAnPonSrvUnconfOnuIndex	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1.1	Integer32	not-accessible	The unconfigured ONU index.
OCT zxAnPonSrvUnconfOnuSn	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1.2	OCTET STRING	read-only	The unconfigured ONU SN. The first four bytes are an ASCII-encoded four-letter vendor ID. The second four bytes are a binary encoded serial number. This attribute is only supported by GPON.
OCT zxAnPonSrvUnconfOnuPwd	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1.3	OCTET STRING	read-only	The unconfigured ONU password. The format could be displayed for printable characters or hex octets. If the number of the printable characters of the password is less than 10, zeros(0x00) will be padded in the tail. This attribute is only supported by GPON.
STR zxAnPonSrvUnconfOnuLoid	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1.4	DisplayString	read-only	The unconfigured ONU LOID.
OCT zxAnPonSrvUnconfOnuLoidPwd	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1.5	OCTET STRING	read-only	The unconfigured ONU LOID password. The format could be displayed for printable characters or hex octets. If the number of the printable characters of the password is less than 12, zeros(0x00) will be padded in the tail.
MAC zxAnPonSrvUnconfOnuMacAddress	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1.6	MacAddress	read-only	The unconfigured ONU MAC address. This attribute is only supported by EPON.
STR zxAnPonSrvUnconfOnuRegId	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1.7	DisplayString	read-only	The unconfigured ONU registration ID. This attribute is only supported by GPON.
STR zxAnPonSrvUnconfOnuType	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1.8	DisplayString	read-only	The unconfigured ONU type.
STR zxAnPonSrvUnconfOnuExtType	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1.9	DisplayString	read-only	The unconfigured ONU extended type. This attribute is only supported by EPON.
STR zxAnPonSrvUnconfOnuSwVersion	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1.10	DisplayString	read-only	The unconfigured ONU software version.
STR zxAnPonSrvUnconfOnuHwVersion	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1.11	DisplayString	read-only	The unconfigured ONU hardware version. This attribute is only supported by EPON.
DAT zxAnPonSrvUnconfOnuFirstOlTime	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1.12	DateAndTime	read-only	The unconfigured ONU first online time.
DAT zxAnPonSrvUnconfOnuLastOlTime	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1.13	DateAndTime	read-only	The unconfigured ONU last online time.
INT zxAnPonSrvUnconfOnuExtOamStatus	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1.14	INTEGER	read-only	The unconfigured ONU extended OAM status. This attribute is only supported by EPON.
I32 zxAnPonSrvUnconfOnuChannelId	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1.15	Integer32	read-only	The unconfigured ONU channel ID.
INT zxAnPonSrvUnconfOnuSpeedMode	1.3.6.1.4.1.3902.1082.500.2.2.11.2.1.16	INTEGER	read-only	ONU speed mode. The following values are valid for GPON: gpon(1): GPON, xgpon(2): XG-PON, xgspon(3): XGS-PON, unknown(255): unknown. The following values are valid for EPON: epon(11): EPON, oneGAndTenGEpon(12): 1G/10G-EPON, tenGAnd10GEpon(13): 10G/10G-EPON, unknown(255): unknown.
zxAnPonSrvVndObjects	1.3.6.1.4.1.3902.1082.500.2.2.12
zxAnPonSrvVndConfTable	1.3.6.1.4.1.3902.1082.500.2.2.12.2		not-accessible	The VND configuration table.
zxAnPonSrvVndConfEntry	1.3.6.1.4.1.3902.1082.500.2.2.12.2.1		not-accessible	The VND configuration entry.
STR zxAnPonSrvVndName	1.3.6.1.4.1.3902.1082.500.2.2.12.2.1.1	DisplayString	not-accessible	The name of the VND.
I32 zxAnPonSrvVndSupportedEponOnus	1.3.6.1.4.1.3902.1082.500.2.2.12.2.1.2	Integer32	read-write	The supported EPON ONUs of the VND. The value 65535 indicates no limitation.
I32 zxAnPonSrvVndSupportedGponOnus	1.3.6.1.4.1.3902.1082.500.2.2.12.2.1.3	Integer32	read-write	The supported GPON ONUs of the VND. The value 65535 indicates no limitation.
I32 zxAnPonSrvVndBandwidthWeight	1.3.6.1.4.1.3902.1082.500.2.2.12.2.1.4	Integer32	read-write	The bandwidth weight of the VND. The value 0 indicates the system default weight policy.
zxAnPonSrvVndPortConfTable	1.3.6.1.4.1.3902.1082.500.2.2.12.3		not-accessible	The VND PON port configuration table.
zxAnPonSrvVndPortConfEntry	1.3.6.1.4.1.3902.1082.500.2.2.12.3.1		not-accessible	The VND PON port configuration entry.
I32 zxAnPonSrvVndPortMaxBandwidth	1.3.6.1.4.1.3902.1082.500.2.2.12.3.1.1	Integer32	read-write	The maxinum bandwidth assigned to the VND PON port. the value 0 indicates no limitation.
I32 zxAnPonSrvVndPortSupportedOnus	1.3.6.1.4.1.3902.1082.500.2.2.12.3.1.2	Integer32	read-write	The supported ONUs of the VND PON port. The value 65535 indicates no limitation.
STR zxAnPonSrvVndPortAvailableOnuIds	1.3.6.1.4.1.3902.1082.500.2.2.12.3.1.3	DisplayString	read-write	The available ONU IDs of the VND PON port. The format as below: 'x,x,x-x'. The empty string indicates no configuration.
zxAnPonSrvVndBindOnuRuleTable	1.3.6.1.4.1.3902.1082.500.2.2.12.4		not-accessible	The VND binding ONU rule table.
zxAnPonSrvVndBindOnuRuleEntry	1.3.6.1.4.1.3902.1082.500.2.2.12.4.1		not-accessible	The VND binding ONU rule entry.
I32 zxAnPonSrvVndBindOnuRuleId	1.3.6.1.4.1.3902.1082.500.2.2.12.4.1.1	Integer32	not-accessible	The rule ID of the VND binding ONU.
INT zxAnPonSrvVndBindOnuType	1.3.6.1.4.1.3902.1082.500.2.2.12.4.1.2	INTEGER	read-create	The type of the VND binding ONU.
MAC zxAnPonSrvVndBindOnuStartMac	1.3.6.1.4.1.3902.1082.500.2.2.12.4.1.3	MacAddress	read-create	The starting MAC address of the VND binding ONU.
MAC zxAnPonSrvVndBindOnuEndMac	1.3.6.1.4.1.3902.1082.500.2.2.12.4.1.4	MacAddress	read-create	The ending MAC address of the VND binding ONU.
OCT zxAnPonSrvVndBindOnuSn	1.3.6.1.4.1.3902.1082.500.2.2.12.4.1.5	OCTET STRING	read-create	The serial number of the VND binding ONU. The value '0x0000000000000000' indicates this attribute is invalid.
STR zxAnPonSrvVndBindOnuRegExpRule	1.3.6.1.4.1.3902.1082.500.2.2.12.4.1.6	DisplayString	read-create	The regular expression rule of the VND binding ONU. For example: GPON SN ZTEG0001000[1-9] represents ZTEG00010001 to ZTEG00010009; ZTEG0001000* represents ZTEG00010000 to ZTEG00010009; ZTEG000100 represents ZTEG00010000 to ZTEG00010099; EPON MAC 00d0d02505 represents 00d0d0250500 to 00d0d02505ff; 00d0d02505[1-7]* represents 00d0d0250510 to 00d0d025057f. The empty string indicates this attribute is invalid.
STR zxAnPonSrvVndBindOnuLoid	1.3.6.1.4.1.3902.1082.500.2.2.12.4.1.7	DisplayString	read-create	The LOID of the VND binding ONU. The empty string indicates this attribute is invalid.
INT zxAnPonSrvVndBindOnuRuleType	1.3.6.1.4.1.3902.1082.500.2.2.12.4.1.8	INTEGER	read-create	The rule type of the VND binding ONU. mac(1) : MAC address rule, zxAnPonSrvVndBindOnuStartMac is valid. macRange(2) : MAC address range rule, zxAnPonSrvVndBindOnuStartMac and zxAnPonSrvVndBindOnuEndMac are valid. macRegex(3) : MAC address regex rule, zxAnPonSrvVndBindOnuRegExpRule is valid. sn(4) : SN rule, zxAnPonSrvVndBindOnuSn is valid. snRegex(5) : SN regular expression rule, zxAnPonSrvVndBindOnuRegExpRule is valid. snPlusPwd(6) : SN + password rule, zxAnPonSrvVndBindOnuSn and zxAnPonSrvVndBindOnuPwd are valid. snPlusRid(7) : SN + RID rule, zxAnPonSrvVndBindOnuSn and zxAnPonSrvVndBindOnuRid are valid. pwd(8) : password rule, zxAnPonSrvVndBindOnuPwd is valid. loid(9) : LOID rule, zxAnPonSrvVndBindOnuLoid is valid. loidPlusPwd(10) : LOID + password rule, zxAnPonSrvVndBindOnuLoid and zxAnPonSrvVndBindOnuLoidPwd are valid. psk(11) : PSK rule, zxAnPonSrvVndBindOnuPsk is valid. rid(12) : RID rule, zxAnPonSrvVndBindOnuRid is valid.
OCT zxAnPonSrvVndBindOnuPwd	1.3.6.1.4.1.3902.1082.500.2.2.12.4.1.9	OCTET STRING	read-create	The ONU password of the VND binding ONU. The value '0x00' indicates this attribute is invalid.
OCT zxAnPonSrvVndBindOnuPsk	1.3.6.1.4.1.3902.1082.500.2.2.12.4.1.10	OCTET STRING	read-create	The PSK value of the VND binding ONU. This attribute value is hex data. The value '0x00000000000000000000000000000000' indicates this attribute is invalid.
STR zxAnPonSrvVndBindOnuRid	1.3.6.1.4.1.3902.1082.500.2.2.12.4.1.11	DisplayString	read-create	The registration ID of the VND binding ONU. The empty string indicates this attribute is invalid.
OCT zxAnPonSrvVndBindOnuLoidPwd	1.3.6.1.4.1.3902.1082.500.2.2.12.4.1.12	OCTET STRING	read-create	The LOID password of the VND binding ONU. The value '0x00' indicates this attribute is invalid.
ROW zxAnPonSrvVndBindOnuRowStatus	1.3.6.1.4.1.3902.1082.500.2.2.12.4.1.50	RowStatus	read-create	The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
zxAnPonSrvCongestObjects	1.3.6.1.4.1.3902.1082.500.2.2.13
zxAnPonSrvCongestPrfTable	1.3.6.1.4.1.3902.1082.500.2.2.13.2		not-accessible	The PON congestion profile table. It is only supported by C600 serial.
zxAnPonSrvCongestPrfEntry	1.3.6.1.4.1.3902.1082.500.2.2.13.2.1		not-accessible	The PON congestion profile entry.
STR zxAnPonSrvCongestPrfName	1.3.6.1.4.1.3902.1082.500.2.2.13.2.1.1	DisplayString	not-accessible	PON congestion profile name.
I32 zxAnPonSrvCongestUsBwUsage	1.3.6.1.4.1.3902.1082.500.2.2.13.2.1.2	Integer32	read-create	PON upstream bandwidth usage.
I32 zxAnPonSrvCongestDsBwUsage	1.3.6.1.4.1.3902.1082.500.2.2.13.2.1.3	Integer32	read-create	PON downstream bandwidth usage.
I32 zxAnPonSrvCongestDetectTimes	1.3.6.1.4.1.3902.1082.500.2.2.13.2.1.4	Integer32	read-create	Detection times of the PON congestion alarm in a detection period.
I32 zxAnPonSrvCongestDetectInterval	1.3.6.1.4.1.3902.1082.500.2.2.13.2.1.5	Integer32	read-create	Detection interval of the PON congestion alarm.
I32 zxAnPonSrvCongestCriAlmThresh	1.3.6.1.4.1.3902.1082.500.2.2.13.2.1.6	Integer32	read-create	Critical PON congestion alarm threshold. It indicates the congestion times in a detection period. The value 0 indicates this attribute is not configured.
I32 zxAnPonSrvCongestMajorAlmThresh	1.3.6.1.4.1.3902.1082.500.2.2.13.2.1.7	Integer32	read-create	Major PON congestion alarm threshold. It indicates the congestion times in a detection period. The value 0 indicates this attribute is not configured.
I32 zxAnPonSrvCongestMinorAlmThresh	1.3.6.1.4.1.3902.1082.500.2.2.13.2.1.8	Integer32	read-create	Minor PON congestion alarm threshold. It indicates the congestion times in a detection period. The value 0 indicates this attribute is not configured.
ROW zxAnPonSrvCongestPrfRowStatus	1.3.6.1.4.1.3902.1082.500.2.2.13.2.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
zxAnPonSrvCongestConfTable	1.3.6.1.4.1.3902.1082.500.2.2.13.3		not-accessible	The PON congestion configuration table. The 'IfType' of ifIndex supports 1(physical interface) and 5(PON channel).
zxAnPonSrvCongestConfEntry	1.3.6.1.4.1.3902.1082.500.2.2.13.3.1		not-accessible	The PON congestion configuration entry.
STR zxAnPonSrvCongestConfPrfName	1.3.6.1.4.1.3902.1082.500.2.2.13.3.1.1	DisplayString	read-create	The PON congestion profile name.
ROW zxAnPonSrvCongestConfRowStatus	1.3.6.1.4.1.3902.1082.500.2.2.13.3.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
zxAnPonSrvOnuSplitterObjects	1.3.6.1.4.1.3902.1082.500.2.2.14
zxAnPonSrvOnuSplitterConfTable	1.3.6.1.4.1.3902.1082.500.2.2.14.2		not-accessible	The ONU splitter configuration table.
zxAnPonSrvOnuSplitterConfEntry	1.3.6.1.4.1.3902.1082.500.2.2.14.2.1		not-accessible	The ONU splitter configuration entry.
STR zxAnPonSrvOnuSplitterId	1.3.6.1.4.1.3902.1082.500.2.2.14.2.1.1	DisplayString	read-create	The ONU splitter ID. The format is '1-1-3...-n', n indicates the nth splitter identification. The empty string indicates no configuration.
zxAnPonSrvLicenseObjects	1.3.6.1.4.1.3902.1082.500.2.2.99
zxAnPonSrvLicenseTable	1.3.6.1.4.1.3902.1082.500.2.2.99.2		not-accessible	XPon License message table.
zxAnPonSrvLicenseEntry	1.3.6.1.4.1.3902.1082.500.2.2.99.2.1		not-accessible	It is entry in the zxAnPonSrvLicenseTable.
I32 zxAnPonSrvLicenseIndex	1.3.6.1.4.1.3902.1082.500.2.2.99.2.1.1	Integer32	not-accessible	Index of message.
OCT zxAnPonSrvLicenseMsg	1.3.6.1.4.1.3902.1082.500.2.2.99.2.1.2	OCTET STRING	read-write	This process include 5 messages.
zxAnPonSrvTrapBindValueObjects	1.3.6.1.4.1.3902.1082.500.2.2.150
zxAnPonSrvNotifications	1.3.6.1.4.1.3902.1082.500.2.3
zxAnPonSrvPonIfTraps	1.3.6.1.4.1.3902.1082.500.2.3.1
NTF zxAnPonSrvFiberPlugWrongPortAlm	1.3.6.1.4.1.3902.1082.500.2.3.1.1			A zxAnPonSrvFiberPlugWrongPortAlm trap is sent when the agent has detected that the fiber has been plugged in the wrong PON port.
NTF zxAnPonSrvFiberPlugWrongPortClr	1.3.6.1.4.1.3902.1082.500.2.3.1.2			A zxAnPonSrvFiberPlugWrongPortClr trap is sent when the agent has detected that the fiber has been plugged in the right PON port.
NTF zxAnPonSrvPLAOnusNeverOnlineAlm	1.3.6.1.4.1.3902.1082.500.2.3.1.3			A zxAnPonSrvPLAOnusNeverOnlineAlm trap is sent when the agent has detected that the PON port is loss of signal and the alarm reason is all ONUs never online.
NTF zxAnPonSrvPLAOnusNeverOnlineClr	1.3.6.1.4.1.3902.1082.500.2.3.1.4			A zxAnPonSrvPLAOnusNeverOnlineClr trap is sent when the agent has detected that the zxAnPonSrvPLAOnusNeverOnlineAlm alarm was cleared.
NTF zxAnPonSrvPLLastOnuDroppedAlm	1.3.6.1.4.1.3902.1082.500.2.3.1.5			A zxAnPonSrvPLLastOnuDroppedAlm trap is sent when the agent has detected that the PON port is loss of signal and the alarm reason is the last ONU dropped.
NTF zxAnPonSrvPLLastOnuDroppedClr	1.3.6.1.4.1.3902.1082.500.2.3.1.6			A zxAnPonSrvPLLastOnuDroppedClr trap is sent when the agent has detected that the zxAnPonSrvPLLastOnuDroppedAlm alarm was cleared.
NTF zxAnPonSrvPLOnlyOnuDroppedAlm	1.3.6.1.4.1.3902.1082.500.2.3.1.7			A zxAnPonSrvPLOnlyOnuDroppedAlm trap is sent when the agent has detected that the PON port is loss of signal and the alarm reason is the only ONU dropped.
NTF zxAnPonSrvPLOnlyOnuDroppedClr	1.3.6.1.4.1.3902.1082.500.2.3.1.8			A zxAnPonSrvPLOnlyOnuDroppedClr trap is sent when the agent has detected that the zxAnPonSrvPLOnlyOnuDroppedAlm alarm was cleared.
NTF zxAnPonSrvPLAllOnusDyingGaspAlm	1.3.6.1.4.1.3902.1082.500.2.3.1.9			A zxAnPonSrvPLAllOnusDyingGaspAlm trap is sent when the agent has detected that the PON port is loss of signal and the alarm reason is all ONUs dying gasp.
NTF zxAnPonSrvPLAllOnusDyingGaspClr	1.3.6.1.4.1.3902.1082.500.2.3.1.10			A zxAnPonSrvPLAllOnusDyingGaspClr trap is sent when the agent has detected that the zxAnPonSrvPLAllOnusDyingGaspAlm alarm was cleared.
NTF zxAnPonSrvPLLastOnuDyingGaspAlm	1.3.6.1.4.1.3902.1082.500.2.3.1.11			A zxAnPonSrvPLLastOnuDyingGaspAlm trap is sent when the agent has detected that the PON port is loss of signal and the alarm reason is the last ONU dying gasp.
NTF zxAnPonSrvPLLastOnuDyingGaspClr	1.3.6.1.4.1.3902.1082.500.2.3.1.12			A zxAnPonSrvPLLastOnuDyingGaspClr trap is sent when the agent has detected that the zxAnPonSrvPLLastOnuDyingGaspAlm alarm was cleared.
NTF zxAnPonSrvPLOnlyOnuDyingGaspAlm	1.3.6.1.4.1.3902.1082.500.2.3.1.13			A zxAnPonSrvPLOnlyOnuDyingGaspAlm trap is sent when the agent has detected that the PON port is loss of signal and the alarm reason is the only ONU dying gasp.
NTF zxAnPonSrvPLOnlyOnuDyingGaspClr	1.3.6.1.4.1.3902.1082.500.2.3.1.14			A zxAnPonSrvPLOnlyOnuDyingGaspClr trap is sent when the agent has detected that the zxAnPonSrvPLOnlyOnuDyingGaspAlm alarm was cleared.
NTF zxAnPonSrvPCLTrunkFiberBrokenAlm	1.3.6.1.4.1.3902.1082.500.2.3.1.15			A zxAnPonSrvPCLTrunkFiberBrokenAlm trap is sent when the agent has detected that the PON port channel is loss of signal and the alarm reason is the trunk fiber broken.
NTF zxAnPonSrvPCLTrunkFiberBrokenClr	1.3.6.1.4.1.3902.1082.500.2.3.1.16			A zxAnPonSrvPCLTrunkFiberBrokenClr trap is sent when the agent has detected that the zxAnPonSrvPCLTrunkFiberBrokenAlm alarm was cleared.
NTF zxAnPonSrvPCLAOnusNeverOnlineAlm	1.3.6.1.4.1.3902.1082.500.2.3.1.17			A zxAnPonSrvPCLAOnusNeverOnlineAlm trap is sent when the agent has detected that the PON port channel is loss of signal and the alarm reason is all ONUs never online.
NTF zxAnPonSrvPCLAOnusNeverOnlineClr	1.3.6.1.4.1.3902.1082.500.2.3.1.18			A zxAnPonSrvPCLAOnusNeverOnlineClr trap is sent when the agent has detected that the zxAnPonSrvPCLAOnusNeverOnlineAlm alarm was cleared.
NTF zxAnPonSrvPCLLastOnuDroppedAlm	1.3.6.1.4.1.3902.1082.500.2.3.1.19			A zxAnPonSrvPCLLastOnuDroppedAlm trap is sent when the agent has detected that the PON port channel is loss of signal and the alarm reason is the last ONU dropped.
NTF zxAnPonSrvPCLLastOnuDroppedClr	1.3.6.1.4.1.3902.1082.500.2.3.1.20			A zxAnPonSrvPCLLastOnuDroppedClr trap is sent when the agent has detected that the zxAnPonSrvPCLLastOnuDroppedAlm alarm was cleared.
NTF zxAnPonSrvPCLOnlyOnuDroppedAlm	1.3.6.1.4.1.3902.1082.500.2.3.1.21			A zxAnPonSrvPCLOnlyOnuDroppedAlm trap is sent when the agent has detected that the PON port channel is loss of signal and the alarm reason is the only ONU dropped.
NTF zxAnPonSrvPCLOnlyOnuDroppedClr	1.3.6.1.4.1.3902.1082.500.2.3.1.22			A zxAnPonSrvPCLOnlyOnuDroppedClr trap is sent when the agent has detected that the zxAnPonSrvPCLOnlyOnuDroppedAlm alarm was cleared.
NTF zxAnPonSrvPCLAllOnusDyingGaspAlm	1.3.6.1.4.1.3902.1082.500.2.3.1.23			A zxAnPonSrvPCLAllOnusDyingGaspAlm trap is sent when the agent has detected that the PON port channel is loss of signal and the alarm reason is all ONUs dying gasp.
NTF zxAnPonSrvPCLAllOnusDyingGaspClr	1.3.6.1.4.1.3902.1082.500.2.3.1.24			A zxAnPonSrvPCLAllOnusDyingGaspClr trap is sent when the agent has detected that the zxAnPonSrvPCLAllOnusDyingGaspAlm alarm was cleared.
NTF zxAnPonSrvPCLLastOnuDyingGaspAlm	1.3.6.1.4.1.3902.1082.500.2.3.1.25			A zxAnPonSrvPCLLastOnuDyingGaspAlm trap is sent when the agent has detected that the PON port channel is loss of signal and the alarm reason is the last ONU dying gasp.
NTF zxAnPonSrvPCLLastOnuDyingGaspClr	1.3.6.1.4.1.3902.1082.500.2.3.1.26			A zxAnPonSrvPCLLastOnuDyingGaspClr trap is sent when the agent has detected that the zxAnPonSrvPCLLastOnuDyingGaspAlm alarm was cleared.
NTF zxAnPonSrvPCLOnlyOnuDyingGaspAlm	1.3.6.1.4.1.3902.1082.500.2.3.1.27			A zxAnPonSrvPCLOnlyOnuDyingGaspAlm trap is sent when the agent has detected that the PON port channel is loss of signal and the alarm reason is the only ONU dying gasp.
NTF zxAnPonSrvPCLOnlyOnuDyingGaspClr	1.3.6.1.4.1.3902.1082.500.2.3.1.28			A zxAnPonSrvPCLOnlyOnuDyingGaspClr trap is sent when the agent has detected that the zxAnPonSrvPCLOnlyOnuDyingGaspAlm alarm was cleared.
zxAnPonSrvOnuTraps	1.3.6.1.4.1.3902.1082.500.2.3.2
NTF zxAnPonSrvOnuAlmJitterOccurred	1.3.6.1.4.1.3902.1082.500.2.3.2.1			A zxAnPonSrvOnuAlmJitterOccurred trap is sent when the agent has detected the ONU alarm jitter.
zxAnPonSrvGeneralTraps	1.3.6.1.4.1.3902.1082.500.2.3.9
zxAnPonSrvConformance	1.3.6.1.4.1.3902.1082.500.2.4
zxAnPonSrvCompliances	1.3.6.1.4.1.3902.1082.500.2.4.1
zxAnPonSrvCompliance	1.3.6.1.4.1.3902.1082.500.2.4.1.1			The compliance statement for entities which implement the ZTE-AN-PON-SERVICE-MIB.
zxAnPonSrvGroups	1.3.6.1.4.1.3902.1082.500.2.4.2
zxAnPonSrvIpGroup	1.3.6.1.4.1.3902.1082.500.2.4.2.2			A collection of objects for ONU IP address of inband management channel.
zxAnPonSrvOnuBlacklistGroup	1.3.6.1.4.1.3902.1082.500.2.4.2.3			A collection of objects for ONU blacklist management.
zxAnPonSrvOnuResGroup	1.3.6.1.4.1.3902.1082.500.2.4.2.4			A collection of objects for ONU ID resource management.
zxAnPonSrvPlugAndPlayGroup	1.3.6.1.4.1.3902.1082.500.2.4.2.6			A collection of objects for Plug and Play management.
zxAnPonSrvDbaGroup	1.3.6.1.4.1.3902.1082.500.2.4.2.7			A collection of objects for OLT Dba management.

RFC description

Manages ZTE access node PON service provisioning including T-CONTs, GEM ports, and traffic profiles.

Start monitoring ZTE ZXR10 carrier routers/switches (ONU-separation-profile/IP-address-pool config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-AN-PON-SERVICE-MIB

What Is ZTE-AN-PON-SERVICE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description