All MIBs › ZTE-AN-QOS-MIB
Organization: ZTE Corporation
Last Updated: 2016-11-21
Category: ZTE Access Node (ZTE-AN) Management
Description: Manages ZTE access node QoS policy configuration including queuing, scheduling, and traffic shaping.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZTE-AN-QOS-MIB?
ZTE-AN-QOS-MIB is a ZTE Corporation enterprise MIB (under zxAnQos, imported from ZTE-AN-SMI) that models quality-of-service configuration for ZTE access-node equipment such as GPON OLT/ONU and C600-series broadband access platforms. It defines CoS/DSCP mapping profile tables (zxAnQosCosToCosPrfTable, zxAnQosDscpToDscpPrfTable, zxAnQosDscpToCosPrfTable, zxAnQosMplsTcToCosPrfTable, zxAnQosCosToMplsTcPrfTable, zxAnQosCosToDeiPrfTable) each keyed by a named profile and governed by a RowStatus-based create/destroy lifecycle, alongside queue-management objects (zxAnQosGlobalMaxQueues, zxAnQosGlobalCosToQueue, zxAnQosGlobalQueueWeight, zxAnQosQueueConfPrfTable for depth ratio/buffer size, and zxAnQosQueueWredConfTable for WRED green/yellow drop thresholds and probabilities). Per-interface configuration is captured in zxAnQosIfConfTable (indexed by ifIndex and zxAnSubIfIndex, covering trust mode, default CoS, and assigned mapping/queue profiles), while zxAnQosIfQueueStatsTable exposes per-queue forwarded/discarded packet counters split by green/yellow drop-precedence color. This gives operators fine-grained visibility into how traffic classification, queuing, and congestion control are behaving on a live access node, and administrators can download the ZTE-AN-QOS-MIB file to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE access-node equipment
- ZTE GPON OLT/ONU and C600-series broadband access platforms
- ZTE access-network (ZXA10) equipment
Monitoring Examples
An operator polls zxAnQosIfQueueStatsTable for a GPON OLT interface to compare zxAnQosIfQueueStatsForwardPkts against zxAnQosIfQueueStatsDiscardPkts (and the green/yellow discard breakdown) per queue; a rising discard count on a supposedly high-priority queue, together with the zxAnQosQueueWredConfTable thresholds for that queue, would point to WRED or shaping profile misconfiguration causing unwanted drops.
What Can Be Monitored
- CoS/DSCP/MPLS-TC mapping profile tables
- queue configuration and WRED threshold tables
- per-interface QoS trust mode and profile assignment
- per-queue forwarded/discarded packet counters
- profile row status (create/destroy) lifecycle
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| ifIndex | OBJECT-TYPE |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter64 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString | |
| RowStatus |
From ZTE-AN-IF-MIB
| zxAnSubIfIndex | OBJECT-TYPE |
From ZTE-AN-SMI
| zxAnQos | OBJECT-IDENTITY |
From ZTE-AN-TC-MIB
| VlanId |
How to Use in IPNetwork Monitor
Example using zxAnQosIfQueueStatsForwardPkts OID:
Select a ZTE access-network equipment as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxAnQosIfQueueStatsForwardPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the forwarding packets. Value 0x7fffffffffffffff means not supported. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zxAnQosMib | 1.3.6.1.4.1.3902.1082.50.1 | This MIB defines ZTE Access Node QoS managed objects. | ||
| zxAnQosGlobalObjects | 1.3.6.1.4.1.3902.1082.50.1.1 | |||
| BIT zxAnQosCapabilities | 1.3.6.1.4.1.3902.1082.50.1.1.100 | Bits | read-only | The QoS capabilities. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means supporting zxAnQosPvcToQueue in zxAnQosQueueMapPrfTable. bit 1: value 1 means supporting PON channel interface in zxAnQosIfQueueStatsTable. bit 2: value 1 means supporting zxAnQosQueueConfBufferSize in zxAnQosQueueConfPrfTable. NOTE: No recommended to display it in NMS. |
| zxAnQosObjects | 1.3.6.1.4.1.3902.1082.50.1.2 | |||
| zxAnQosMapObjects | 1.3.6.1.4.1.3902.1082.50.1.2.1 | |||
| zxAnQosMapGlobalObjects | 1.3.6.1.4.1.3902.1082.50.1.2.1.1 | |||
| OCT zxAnQosGlobalCosToDropPrecedence | 1.3.6.1.4.1.3902.1082.50.1.2.1.1.1 | OCTET STRING | read-write | The global CoS mapping drop precedence value. For example, '00 01 02 00 01 02 01 02' means CoS 0 is mapping to drop precedence 0, CoS 1 is mapping to drop precedence 1, ..., CoS 7 is mapping to drop precedence 2. The range of drop precedence is 0-2. The value 'ff ff ff ff ff ff ff ff' means the drop precedence is not configured. |
| zxAnQosCosToCosPrfTable | 1.3.6.1.4.1.3902.1082.50.1.2.1.2 | not-accessible | This table contains CosToCos mapping information. One entry in this table reflects a profile defined which can be used to configure an interface. | |
| zxAnQosCosToCosPrfEntry | 1.3.6.1.4.1.3902.1082.50.1.2.1.2.1 | not-accessible | zxAnQosCosToCosPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosCosToCos, zxAnQosCosToCosPrfRowStatus. optional : none. To delete an entry, only zxAnQosCosToCosPrfRowStatus is needed in one SNMP setOperation. After an entry is created, only variable zxAnQosCosToCos can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue. | |
| STR zxAnQosCosToCosPrfName | 1.3.6.1.4.1.3902.1082.50.1.2.1.2.1.1 | DisplayString | not-accessible | The profile name is a display string. It is an index of this table. |
| OCT zxAnQosCosToCos | 1.3.6.1.4.1.3902.1082.50.1.2.1.2.1.2 | OCTET STRING | read-create | The values for CoS remarking. For example, the value '00 01 02 03 04 05 06 07' means CoS 0 is remarked to CoS 0,..., CoS 7 is remarked to CoS 7. The range of CoS is 0-7. |
| ROW zxAnQosCosToCosPrfRowStatus | 1.3.6.1.4.1.3902.1082.50.1.2.1.2.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosCosToCosPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnQosDscpToDscpPrfTable | 1.3.6.1.4.1.3902.1082.50.1.2.1.3 | not-accessible | This table contains DSCP remark information. One entry in this table reflects a profile defined which can be used to configure an interface. | |
| zxAnQosDscpToDscpPrfEntry | 1.3.6.1.4.1.3902.1082.50.1.2.1.3.1 | not-accessible | zxAnQosDscpToDscpPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosDscpToDscp, zxAnQosDscpToDscpPrfRowStatus. optional: none. To delete an entry, only zxAnQosDscpToDscpPrfRowStatus is needed in one SNMP set operation. After an entry is created, only variable zxAnQosDscpToDscp can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue. | |
| STR zxAnQosDscpToDscpPrfName | 1.3.6.1.4.1.3902.1082.50.1.2.1.3.1.1 | DisplayString | not-accessible | The profile name is a display string. It is an index of this table. |
| OCT zxAnQosDscpToDscp | 1.3.6.1.4.1.3902.1082.50.1.2.1.3.1.2 | OCTET STRING | read-create | The values for DSCP priority remarking. For example, the value '00 01 ...3F' means DSCP priority 0 is remarked to DSCP priority 0,...,DSCP priority 63 is remarked to DSCP priority 63. The range of DSCP priority is 0-63. |
| ROW zxAnQosDscpToDscpPrfRowStatus | 1.3.6.1.4.1.3902.1082.50.1.2.1.3.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosDscpToDscpPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnQosDscpToCosPrfTable | 1.3.6.1.4.1.3902.1082.50.1.2.1.4 | not-accessible | This table contains DSCP to CoS mapping information. One entry in this table reflects a profile defined which can be used to configure an interface. | |
| zxAnQosDscpToCosPrfEntry | 1.3.6.1.4.1.3902.1082.50.1.2.1.4.1 | not-accessible | zxAnQosDscpToCosPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosDscpToCos, zxAnQosDscpToCosPrfRowStatus. optional: none. To delete an entry, only zxAnQosDscpToCosPrfRowStatus is needed in one SNMP set operation. After an entry is created, only variable zxAnQosDscpToCos can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue. | |
| STR zxAnQosDscpToCosPrfName | 1.3.6.1.4.1.3902.1082.50.1.2.1.4.1.1 | DisplayString | not-accessible | The profile name is a display string. It is an index of this table. |
| OCT zxAnQosDscpToCos | 1.3.6.1.4.1.3902.1082.50.1.2.1.4.1.2 | OCTET STRING | read-create | The DSCP mapping CoS. For example, the value '00 01...07' means DSCP priority 0 is mapping to CoS 0,...,DSCP priority 63 is mapping to CoS 7. The range of CoS is 0-7. |
| ROW zxAnQosDscpToCosPrfRowStatus | 1.3.6.1.4.1.3902.1082.50.1.2.1.4.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosDscpToCosPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnQosMplsTcToCosPrfTable | 1.3.6.1.4.1.3902.1082.50.1.2.1.6 | not-accessible | This table contains MPLS TC value to CoS mapping information. One entry in this table reflects a profile defined which can be used to configure an interface. | |
| zxAnQosMplsTcToCosPrfEntry | 1.3.6.1.4.1.3902.1082.50.1.2.1.6.1 | not-accessible | zxAnQosMplsTcToCosPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosMplsTcToCos, zxAnQosMplsTcToCosPrfRowStatus. optional: none. To delete an entry, only zxAnQosMplsTcToCosPrfRowStatus is needed in one SNMP set operation. After an entry is created, only variable zxAnQosMplsTcToCos can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue. | |
| STR zxAnQosMplsTcToCosPrfName | 1.3.6.1.4.1.3902.1082.50.1.2.1.6.1.1 | DisplayString | not-accessible | The profile name is a display string. It is an index of this table. |
| OCT zxAnQosMplsTcToCos | 1.3.6.1.4.1.3902.1082.50.1.2.1.6.1.2 | OCTET STRING | read-create | The MPLS TC mapping to CoS. For example, '00 01 02 03 04 05 06 07' means TC 0 is mapping to CoS 0, ..., TC 7 is mapping to CoS 7. The range of MPLS TC value and CoS are 0-7. |
| ROW zxAnQosMplsTcToCosPrfRowStatus | 1.3.6.1.4.1.3902.1082.50.1.2.1.6.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosMplsTcToCosPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnQosCosToMplsTcPrfTable | 1.3.6.1.4.1.3902.1082.50.1.2.1.7 | not-accessible | This table contains CoS to MPLS TC mapping information. One entry in this table reflects a profile defined which can be used to configure an interface. | |
| zxAnQosCosToMplsTcPrfEntry | 1.3.6.1.4.1.3902.1082.50.1.2.1.7.1 | not-accessible | zxAnQosCosToMplsTcPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosCosToMplsTc, zxAnQosCosToMplsTcPrfRowStatus. optional: none. To delete an entry, only zxAnQosCosToMplsTcPrfRowStatus is needed in one SNMP set operation. After an entry is created, only variable zxAnQosCosToMplsTc can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue. | |
| STR zxAnQosCosToMplsTcPrfName | 1.3.6.1.4.1.3902.1082.50.1.2.1.7.1.1 | DisplayString | not-accessible | The profile name is a display string. It is an index of this table. |
| OCT zxAnQosCosToMplsTc | 1.3.6.1.4.1.3902.1082.50.1.2.1.7.1.2 | OCTET STRING | read-create | The CoS mapping MPLS TC value. For example, '00 01 02 03 04 05 06 07' means CoS 0 is mapping to TC value 0,..., CoS 7 is mapping to TC value 7. The range of CoS and TC value are 0-7. |
| ROW zxAnQosCosToMplsTcPrfRowStatus | 1.3.6.1.4.1.3902.1082.50.1.2.1.7.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosCosToMplsTcPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnQosCosToDeiPrfTable | 1.3.6.1.4.1.3902.1082.50.1.2.1.9 | not-accessible | This table contains CoS to DEI (Drop Eligible Indicator) mapping information. One entry in this table reflects a profile defined which can be used to configure an interface. | |
| zxAnQosCosToDeiPrfEntry | 1.3.6.1.4.1.3902.1082.50.1.2.1.9.1 | not-accessible | zxAnQosCosToDeiPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosCosToDeiMappingType, zxAnQosCosToDei, zxAnQosCosToDeiRowStatus. optional: none. To delete an entry, only zxAnQosCosToDeiRowStatus is needed in one SNMP set operation. After an entry is created, variable zxAnQosCosToDeiMappingType, zxAnQosCosToDei can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue. | |
| STR zxAnQosCosToDeiPrfName | 1.3.6.1.4.1.3902.1082.50.1.2.1.9.1.1 | DisplayString | not-accessible | The profile name is a display string. It is an index of this table. |
| INT zxAnQosCosToDeiMappingType | 1.3.6.1.4.1.3902.1082.50.1.2.1.9.1.2 | INTEGER | read-create | ccosToSdei(1) -- mapping C-Tag CoS to S-DEI. ccosToCdei(2) -- mapping C-Tag CoS to C-DEI. scosToSdei(3) -- mapping S-Tag CoS to S-DEI. |
| OCT zxAnQosCosToDei | 1.3.6.1.4.1.3902.1082.50.1.2.1.9.1.3 | OCTET STRING | read-create | The CoS mapping to DEI value. For example, '00 01 02 00 01 02 01 02' means CoS 0 is mapping to DEI 0, CoS 1 is mapping to DEI 1, ..., CoS 7 is mapping to DEI 2. The range of DEI is 0-2. '0' -- green packet. '1' -- yellow packet. '2' -- discarded. |
| ROW zxAnQosCosToDeiRowStatus | 1.3.6.1.4.1.3902.1082.50.1.2.1.9.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosCosToDeiPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnQosQueueObjects | 1.3.6.1.4.1.3902.1082.50.1.2.2 | |||
| zxAnQosQueueGlobalObjects | 1.3.6.1.4.1.3902.1082.50.1.2.2.1 | |||
| INT zxAnQosGlobalMaxQueues | 1.3.6.1.4.1.3902.1082.50.1.2.2.1.3 | INTEGER | read-write | The global maximum queues. |
| OCT zxAnQosGlobalCosToQueue | 1.3.6.1.4.1.3902.1082.50.1.2.2.1.4 | OCTET STRING | read-write | The queues of CoS. For example, the value '01 01 02 03 04 06 06 07' means that the queue of CoS 5 is 6, ..., the queue of CoS 7 is 7. The range of each queue is 0 to 7. The number of queues is fixed to zxAnQosGlobalMaxQueues. |
| OCT zxAnQosGlobalQueueWeight | 1.3.6.1.4.1.3902.1082.50.1.2.2.1.5 | OCTET STRING | read-write | The weight of queues. For example, the value '01 02 04 06 02 02 02 02' means that the weight of queue0 is 1, ..., the weight of queue7 is 2. The range of each weight is 0 to 100. The number of queues is fixed to zxAnQosGlobalMaxQueues. |
| INT zxAnQosGlobalQueueMode | 1.3.6.1.4.1.3902.1082.50.1.2.2.1.6 | INTEGER | read-write | The global queue mode configuration. pon(1) - The queue configuration is effective on PON interfaces. vportNormal(2) - The queue configuration is effective on VPort, the priority of unicast or multicast green packets is higher than yellow packets. Only four queues is supported. vportCir(3) - The queue configuration is effective on VPort, the priority of unicast green packets is higher than multicast packets, the priority of multicast packets is higher than yellow packets. vportPir(4) - The queue configuration is effective on VPort, the priority of unicast or multicast green packets is higher than yellow packets. Only eight queues is supported. vportNormalBidirectional(5) - The queue configuration supports egress or ingress direction based on vportNormal. |
| OCT zxAnQosGlobalQueueToQueue | 1.3.6.1.4.1.3902.1082.50.1.2.2.1.7 | OCTET STRING | read-write | The mapping of queue to queue. For example, the value '00 02 03 05' means that queue0 is mapping queue0, queue2 is mapping queue1, queue3 is mapping queue2, queue5 is mapping queue3. The range of each queue is 0 to 7. The number of queues is fixed to 4. |
| I32 zxAnQosGlbQStatShortInterval | 1.3.6.1.4.1.3902.1082.50.1.2.2.1.8 | Integer32 | read-write | The short interval of queue statistics. |
| I32 zxAnQosGlbQStatLongInterval | 1.3.6.1.4.1.3902.1082.50.1.2.2.1.9 | Integer32 | read-write | The long interval of queue statistics. |
| zxAnQosQueueConfPrfTable | 1.3.6.1.4.1.3902.1082.50.1.2.2.7 | not-accessible | QoS queue configuration profile table. | |
| zxAnQosQueueConfPrfEntry | 1.3.6.1.4.1.3902.1082.50.1.2.2.7.1 | not-accessible | QoS queue configuration profile entry. | |
| STR zxAnQosQueueConfPrfName | 1.3.6.1.4.1.3902.1082.50.1.2.2.7.1.1 | DisplayString | not-accessible | QoS queue configuration profile name. |
| OCT zxAnQosQueueConfDepthRatio | 1.3.6.1.4.1.3902.1082.50.1.2.2.7.1.2 | OCTET STRING | read-create | QoS queue depth ratio. For example, the value '01 02 04 06 02 02 02 50' means depth ratio of queue0 is 1, ..., depth ratio of queue7 is 80. The range of depth ratio is 1 to 100. The number of queues is fixed to zxAnQosGlobalMaxQueues. |
| I32 zxAnQosQueueConfBufferSize | 1.3.6.1.4.1.3902.1082.50.1.2.2.7.1.3 | Integer32 | read-create | QoS queue buffer size. |
| ROW zxAnQosQueueConfPrfRowStatus | 1.3.6.1.4.1.3902.1082.50.1.2.2.7.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosQueueConfPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnQosQueueWredConfTable | 1.3.6.1.4.1.3902.1082.50.1.2.2.30 | not-accessible | WRED configuration table. | |
| zxAnQosQueueWredConfEntry | 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1 | not-accessible | WRED configuration entry. | |
| I32 zxAnQosQWredConfQueueNo | 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.1 | Integer32 | not-accessible | The No. of the queue. |
| I32 zxAnQosQWredConfYellowLThresh | 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.2 | Integer32 | read-create | The lower WRED threshold parameter of a threshold number for the yellow packet when WRED dropping algorithm is used. |
| I32 zxAnQosQWredConfYellowHThresh | 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.3 | Integer32 | read-create | The higher WRED threshold parameter of a threshold number for the yellow packets when WRED dropping algorithm is used. |
| I32 zxAnQosQWredConfYellowMaxProb | 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.4 | Integer32 | read-create | Maximum dropping probability of yellow packet. |
| I32 zxAnQosQWredConfGreenLThresh | 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.5 | Integer32 | read-create | The lower WRED threshold parameter of a threshold number for the green packet when WRED dropping algorithm is used. |
| I32 zxAnQosQWredConfGreenHThresh | 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.6 | Integer32 | read-create | The higher WRED threshold parameter of a threshold number for the green packet when WRED dropping algorithm is used. |
| I32 zxAnQosQWredConfGreenMaxProb | 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.7 | Integer32 | read-create | Maximum dropping probability of green packet. |
| zxAnQosIfObjects | 1.3.6.1.4.1.3902.1082.50.1.2.3 | |||
| zxAnQosIfConfTable | 1.3.6.1.4.1.3902.1082.50.1.2.3.2 | not-accessible | This table contains configuration data for interface, include ethernet interface, GPON OLT and ONU interface. | |
| zxAnQosIfConfEntry | 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1 | not-accessible | An entry in zxAnQosIfConfTable. This table contains QoS configuration parameters for physical interface (include ethernet interface and GPON OLT interface) and GPON ONU interface. For ethernet interface, parameters can be configured include zxAnQosIfRateLimit, zxAnQosIfBucketSize, zxAnQosIfTrustMode, zxAnQosIfDefaultCos, zxAnQosIfDscpToDscpPrf, zxAnQosIfDscpToCosPrf, zxAnQosIfDscpToDropPrecedencePrf and zxAnQosIfQueueBlockPrf. Variables zxAnQosIfRateLimit and zxAnQosIfBucketSize must be configured bindingly. Notice that elements of zxAnQosQueueDepth in the configuring zxAnQosIfQueueBlockPrf should between 5 and 14, or all zreos. For ethernet interface of C600 series, parameters can be configured include zxAnQosIfTrustMode, zxAnQosIfDefaultCos, zxAnQosIfCosToCosPrf, zxAnQosIfDscpToDscpPrf, zxAnQosIfDscpToCosPrf, zxAnQosIfCosOverride, zxAnQosIfEgressCosToCosPrf, zxAnQosIfEgressDscpToCosPrf, and zxAnQosIfQueueConfPrf. For PTP interface, besides the parameters that can be configured to ethernet interface, three more parameters can be configured include zxAnQosIfIngressRateLimit, zxAnQosIfIngressBucketSize and zxAnQosIfQueueMapPrf. Variables zxAnQosIfIngressRateLimit and zxAnQosIfIngressBucketSize must be configured bindingly. Notice that zxAnQosIfQueueMapPrf configured to this interface, its zxAnQosQueueMapMode can only be set to cos or serviceType. For GPON OLT interface, parameters can be configured include zxAnQosIfQueueBlockPrf and zxAnQosIfQueueMapPrf. Notice that zxAnQosIfQueueMapPrf configured to this interface, its zxAnQosQueueMapMode can only be set to cos or serviceType. For GPON ONU interface, parameters can be configured include zxAnQosIfTrustMode, zxAnQosIfCosFilter, zxAnQosIfDefaultCos, zxAnQosIfEgressDefaultCos, zxAnQosIfCosToCosPrf, zxAnQosIfDscpToCosPrf, zxAnQosIfCosOverride, zxAnQosIfEgressCosOverride, zxAnQosIfQueueBlockPrf, zxAnQosIfQueueMapPrf, zxAnQosIfEgressCosToCosPrf and zxAnQosIfEgressDscpToCosPrf. For GPON ONU interface of C600 series, parameters can be configured include zxAnQosIfTrustMode, zxAnQosIfDefaultCos, zxAnQosIfCosToCosPrf, zxAnQosIfDscpToDscpPrf, zxAnQosIfDscpToCosPrf, zxAnQosIfCosOverride, zxAnQosIfEgressCosToCosPrf, zxAnQosIfEgressDscpToCosPrf, and zxAnQosIfQueueConfPrf. | |
| INT zxAnQosIfTrustMode | 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.3 | INTEGER | read-write | Trust cos or trust dscp. Not support for gpon olt interface. |
| I32 zxAnQosIfDefaultCos | 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.5 | Integer32 | read-write | Default CoS, 255 means not support. This object is valid only when zxAnQosIfTrustMode is set to CoS. |
| STR zxAnQosIfCosToCosPrf | 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.7 | DisplayString | read-write | CoS to CoS mapping profile name. An empty string means unsupported. Valid for gpon onu interface. |
| STR zxAnQosIfDscpToDscpPrf | 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.8 | DisplayString | read-write | DSCP remarking profile name. This object is valid only when zxAnQosIfTrustMode is set to dscp. An empty string means unsupported. |
| STR zxAnQosIfDscpToCosPrf | 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.9 | DisplayString | read-write | DSCP to CoS mapping profile name. This object is valid only when zxAnQosIfTrustMode is set to dscp. An empty string means unsupported. |
| INT zxAnQosIfCosOverride | 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.12 | INTEGER | read-write | Enable or disable CoS Override. |
| INT zxAnQosIfEgressCosOverride | 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.14 | INTEGER | read-write | Enable or disable Egress CoS Override. |
| STR zxAnQosIfEgressCosToCosPrf | 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.17 | DisplayString | read-write | Egress CoS to CoS mapping profile name. An empty string means unsupported. |
| STR zxAnQosIfEgressDscpToCosPrf | 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.18 | DisplayString | read-write | Egress DSCP to CoS mapping profile name. An empty string means unsupported. |
| STR zxAnQosIfQueueWredPrf | 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.23 | DisplayString | read-write | Queue WRED profile name. An empty string means unsupported. |
| STR zxAnQosIfQueueConfPrf | 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.26 | DisplayString | read-write | Queue configuration profile name. An empty string means unsupported. |
| zxAnQosIfStatsObjects | 1.3.6.1.4.1.3902.1082.50.1.2.4 | |||
| zxAnQosIfQueueStatsTable | 1.3.6.1.4.1.3902.1082.50.1.2.4.1 | not-accessible | Interfaces queue statistics table. | |
| zxAnQosIfQueueStatsEntry | 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1 | not-accessible | An entry in zxAnQosIfQueueStatsTable. This table contains queue statistics for GPON OLT interfaces and P2P interfaces. It includes zxAnQosIfQueueStatsPassPkts, zxAnQosIfQueueStatsDiscardPkts and zxAnQosIfQueueStatsReset. | |
| I32 zxAnQosIfQueueStatsQueueId | 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.1 | Integer32 | not-accessible | Queue ID. |
| C64 zxAnQosIfQueueStatsForwardPktsEx | 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.2 | Counter64 | read-only | Forwarding packets. Value 0x7fffffffffffffff means not supported. |
| C64 zxAnQosIfQueueStatsDiscardPkts | 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.3 | Counter64 | read-only | Discarded packets. Value 0x7fffffffffffffff means not supported. |
| C64 zxAnQosIfQueueDiscardGreenPkts | 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.4 | Counter64 | read-only | Discarded green packets. Value 0x7fffffffffffffff means not supported. |
| C64 zxAnQosIfQueueDiscardYellowPkts | 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.5 | Counter64 | read-only | Discarded yellow packets. Value 0x7fffffffffffffff means not supported. |
| INT zxAnQosIfQueueStatsReset | 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.50 | INTEGER | read-write | Set the number of packets to zero. When getting this variable, this object always returns 1. |
| zxAnQosBrgIfQueueStatsTable | 1.3.6.1.4.1.3902.1082.50.1.2.4.2 | not-accessible | A table containing queue statistics information. | |
| zxAnQosBrgIfQueueStatsEntry | 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1 | not-accessible | An entry in zxAnQosBrgIfQueueStatsTable. This table contains queue statistics for bridge interfaces. | |
| I32 zxAnQosBrgIfQStatsQueueId | 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.1 | Integer32 | not-accessible | Queue ID. |
| C64 zxAnQosBrgIfQStatsForwardPkts | 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.2 | Counter64 | read-only | Forwarding packets. Value 0x7fffffffffffffff means not supported. |
| C64 zxAnQosBrgIfQStatsDiscardPkts | 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.3 | Counter64 | read-only | Discarded packets. Value 0x7fffffffffffffff means not supported. |
| C64 zxAnQosBrgIfQDiscardGreenPkts | 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.4 | Counter64 | read-only | Discarded green packets. Value 0x7fffffffffffffff means not supported. |
| C64 zxAnQosBrgIfQDiscardYellowPkts | 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.5 | Counter64 | read-only | Discarded yellow packets. Value 0x7fffffffffffffff means not supported. |
| INT zxAnQosBrgIfQStatsReset | 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.49 | INTEGER | read-create | Set the number of packets to zero. When getting this variable, this object always returns 1. |
| ROW zxAnQosBrgIfQStatsRowStatus | 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosBrgIfQueueStatsEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnQosIfQDiscardPktThreshTable | 1.3.6.1.4.1.3902.1082.50.1.2.4.3 | not-accessible | A table containing discarded packet threshold information. | |
| zxAnQosIfQDiscardPktThreshEntry | 1.3.6.1.4.1.3902.1082.50.1.2.4.3.1 | not-accessible | An entry in zxAnQosIfQDiscardPktThreshTable. This table contains discarded packet threshold for queue statistics. | |
| I32 zxAnQosIfQDiscardPktThrQueueId | 1.3.6.1.4.1.3902.1082.50.1.2.4.3.1.1 | Integer32 | not-accessible | Queue ID. |
| I32 zxAnQosIfQShortDiscardPktThresh | 1.3.6.1.4.1.3902.1082.50.1.2.4.3.1.2 | Integer32 | read-create | Short interval discarded packet threshold. |
| I32 zxAnQosIfQLongDiscardPktThresh | 1.3.6.1.4.1.3902.1082.50.1.2.4.3.1.3 | Integer32 | read-create | Long interval discarded packet threshold. |
| ROW zxAnQosIfQDiscardPktThrRowStatus | 1.3.6.1.4.1.3902.1082.50.1.2.4.3.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosIfQDiscardPktThreshEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
| zxAnQosVlanObjects | 1.3.6.1.4.1.3902.1082.50.1.2.5 | |||
| zxAnQosVlanCosToDeiPrfConfTable | 1.3.6.1.4.1.3902.1082.50.1.2.5.2 | not-accessible | A table containing VLAN CoS to DEI (Drop Eligible Indicator) profile information. | |
| zxAnQosVlanCosToDeiPrfConfEntry | 1.3.6.1.4.1.3902.1082.50.1.2.5.2.1 | not-accessible | Entry for zxAnQosVlanCosToDeiPrfConfTable. | |
| VLA zxAnQosVlanCosToDeiPrfConfVid | 1.3.6.1.4.1.3902.1082.50.1.2.5.2.1.1 | VlanId | not-accessible | VLAN ID. |
| STR zxAnQosVlanCosToDeiPrfConfName | 1.3.6.1.4.1.3902.1082.50.1.2.5.2.1.2 | DisplayString | read-create | CoS to DEI profile name. |
| ROW zxAnQosVlanCosToDeiPrfRowStatus | 1.3.6.1.4.1.3902.1082.50.1.2.5.2.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in ZxAnVlanCosToDeiPrfConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1. |
| zxAnQosVlanEgressDeiTable | 1.3.6.1.4.1.3902.1082.50.1.2.5.3 | not-accessible | A table containing VLAN egress DEI information. | |
| zxAnQosVlanEgressDeiEntry | 1.3.6.1.4.1.3902.1082.50.1.2.5.3.1 | not-accessible | Entry for zxAnQosVlanEgressDeiTable. | |
| VLA zxAnQosVlanEgressDeiVid | 1.3.6.1.4.1.3902.1082.50.1.2.5.3.1.1 | VlanId | not-accessible | VLAN ID. |
| ROW zxAnQosVlanEgressDeiRowStatus | 1.3.6.1.4.1.3902.1082.50.1.2.5.3.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosVlanEgressDeiEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1. |
| zxAnQosVlanCosToCosPrfConfTable | 1.3.6.1.4.1.3902.1082.50.1.2.5.4 | not-accessible | A table containing VLAN CoS remarking information. | |
| zxAnQosVlanCosToCosPrfConfEntry | 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1 | not-accessible | Entry for zxAnQosVlanCosToCosPrfConfTable. | |
| VLA zxAnQosVlanCosToCosPrfConfSVid | 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.1 | VlanId | not-accessible | SVLAN ID. |
| I32 zxAnQosVlanCosToCosPrfConfCVid | 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.2 | Integer32 | not-accessible | CVLAN ID. |
| INT zxAnQosVlanCosToCosPrfConfMode | 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.3 | INTEGER | not-accessible | CoS remarking mode. |
| STR zxAnQosVlanCosToCosPrfConfName | 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.4 | DisplayString | read-create | CoS to CoS profile name. |
| ROW zxAnQosVlanCosToCosPrfRowStatus | 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.50 | RowStatus | read-create | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosVlanCosToCosPrfConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1. |
| zxAnQosConformance | 1.3.6.1.4.1.3902.1082.50.1.4 | |||
| zxAnQosCompliances | 1.3.6.1.4.1.3902.1082.50.1.4.1 | |||
| zxAnQosCompliance | 1.3.6.1.4.1.3902.1082.50.1.4.1.1 | The compliance statement for entities which implement the ZTE-AN-QOS-MIB. | ||
| zxAnQosGroups | 1.3.6.1.4.1.3902.1082.50.1.4.2 | |||
| zxAnQosCosToCosPrfGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.1 | A collection of objects creating, modifying or deleting a CosToCosPrf. | ||
| zxAnQosDscpToDscpPrfGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.2 | A collection of objects creating, modifying or deleting a DscpToDscpPrf. | ||
| zxAnQosDscpToCosPrfGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.3 | A collection of objects creating, modifying or deleting a DscpToCosPrf. | ||
| zxAnQosDscpToDropPrecedePrfGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.4 | A collection of objects creating, modifying or deleting a DscpToDropPrf. | ||
| zxAnQosMplsTcToCosPrfGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.5 | A collection of objects creating, modifying or deleting a MplsTcToCosPrf. | ||
| zxAnQosCosToMplsTcPrfGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.6 | A collection of objects creating, modifying or deleting a CosToMplsTcPrf. | ||
| zxAnQosEthCosToQueueGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.7 | A collection of objects configuring cos-to-queue mapping for ethernet interface. | ||
| zxAnQosQueueBlockPrfGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.8 | A collection of objects creating, modifying or deleting a QueueBlockPrf. | ||
| zxAnQosQueueMapPrfGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.9 | A collection of objects creating, modifying or deleting a QueueMapPrf. | ||
| zxAnQosIfTrafficShapeGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.10 | A collection of objects configuring traffic-shaping for ethernet interface. | ||
| zxAnQosIfTrustModeGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.11 | A collection of objects configuring trust-mode for ethernet interface or gpon onu interface. For ethernet interface, when trust dscp, packets received will be modified according to the configured dscp-to-dscp-profile, dscp-to-cos-profile and dscp-to-drop-precedence-profile. | ||
| zxAnQosIfDefaultCosGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.13 | A collection of objects configuring default-cos value for ethernet interface. For ethernet interface, default-cos value is tagged for receiving untag packets. | ||
| zxAnQosIfCosToCosPrfGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.15 | A collection of objects configuring cos-to-cos-profile for gpon onu interface. When trust cos, cos-to-cos-profile configured is valid. | ||
| zxAnQosIfDscpToDscpPrfGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.16 | A collection of objects configuring dscp-to-dscp-profile for ethernet interface. When trust dscp, dscp-to-dscp-profile configured is valid. | ||
| zxAnQosIfDscpToCosPrfGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.17 | A collection of objects configuring dscp-to-cos-profile for ethernet interface and gpon onu interface. When trust dscp, dscp-to-cos-profile configured is valid. | ||
| zxAnQosIfDscpToDropPrePrfGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.18 | A collection of objects configuring dscp-to-drop-profile for ethernet interface. When trust dscp, dscp-to-drop-profile configured is valid. | ||
| zxAnQosIfEgressCosToCosPrfGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.23 | A collection of objects configuring cos-to-cos-profile for gpon onu interface. When trust cos, cos-to-cos-profile configured is valid. | ||
| zxAnQosIfEgressDscpToCosPrfGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.24 | A collection of objects configuring dscp-to-cos-profile for gpon onu interface. When trust dscp, dscp-to-cos-profile configured is valid. | ||
| zxAnQosIfQueueBlockPrfGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.25 | A queue-block profile configuring on ethernet interface, gpon olt interface. | ||
| zxAnQosIfQueueMapPrfGroup | 1.3.6.1.4.1.3902.1082.50.1.4.2.26 | A queue-map profile configuring on gpon olt interface. |
RFC description
Quality of Service management for ZTE access nodes. Defines QoS mapping, queue configuration, and traffic shaping profiles.
Start monitoring ZTE access-network equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.