All MIBs › ZXR10-L2VPN-MIB
Organization: ZTE Corporation
Last Updated: 2010-05-17
Category: ZTE ZXR10 L2VPN and L3VPN
Description: Defines ZTE ZXR10 Layer 2 VPN service configuration including pseudowire and VPLS instance parameters.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZXR10-L2VPN-MIB?
ZXR10-L2VPN-MIB is a ZTE Corporation proprietary MIB (ZXR10/ZXROS platform family) implementing L2VPN pseudowire service provisioning (ZXROSng) on ZTE ZXR10 carrier routers/switches. Its objects cover global pseudowire (PW) capacity/usage and enable state, an SDU (Single/Service Data Unit) table with redundancy-manager, primary/backup PW peer/VC-ID/VC-type, and an SAC (Service Access Circuit) table with service type/definition, split-horizon, ingress tag adjustment, and tag push/rewrite behavior. As a configuration/status MIB it lets an administrator audit and monitor L2VPN pseudowire service provisioning (ZXROSng) on a ZXR10 platform. It is deployed on ZTE ZXR10 carrier routers/switches. Engineers can download the ZXR10-L2VPN-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-L2VPN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE ZXR10 carrier routers/switches
Monitoring Examples
An administrator reviews this MIB's objects to confirm L2VPN pseudowire service provisioning (ZXROSng) is configured and operating as expected on a ZTE ZXR10 platform.
What Can Be Monitored
- L2VPN pseudowire service provisioning (ZXROSng)
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DisplayString | |
| TEXTUAL-CONVENTION |
How to Use in IPNetwork Monitor
Example using zxr10L2vpnRedundancyProtectionCount OID:
Select a ZTE ZXR10 carrier routers/switch (pseudowire capacity/SDU-SAC service-provisioning status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxr10L2vpnRedundancyProtectionCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of the pws switchover. Transforming primary-pw into backup-pw or transforming primary-pw from backup-pw means one. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zte | 1.3.6.1.4.1.3902 | This MIB contains managed object definitions for the ZXROSng L2vpn | ||
| zxr10 | 1.3.6.1.4.1.3902.3 | |||
| zxr10l2vpn | 1.3.6.1.4.1.3902.3.104 | |||
| zxr10l2vpnObjects | 1.3.6.1.4.1.3902.3.104.10 | |||
| zxr10L2vpnSduTable | 1.3.6.1.4.1.3902.3.104.10.1 | not-accessible | Sdu Table. This table contains one entry per sdu table. | |
| zxr10L2vpnSduEntry | 1.3.6.1.4.1.3902.3.104.10.1.1 | not-accessible | The parameter of a Sdu entity containing | |
| STR zxr10L2vpnSduServiceName | 1.3.6.1.4.1.3902.3.104.10.1.1.1 | DisplayString | read-only | The name of the service instance.It consists of 'Forwarder' modules connected by pseudowires and Attach Circuit. |
| STR zxr10L2vpnSduName | 1.3.6.1.4.1.3902.3.104.10.1.1.2 | DisplayString | read-only | The name of Service Distribution Unit (SDU). |
| INT zxr10L2vpnSduServiceType | 1.3.6.1.4.1.3902.3.104.10.1.1.3 | INTEGER | read-only | The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Ethernet over PW,and (3)Multi-segment Pseudowire(MSPW), and (4)Enhanced-Ethernet over Pseudowire |
| STR zxr10L2vpnSduRedandancyMgrName | 1.3.6.1.4.1.3902.3.104.10.1.1.4 | DisplayString | read-only | The name of Redundency-manager. |
| IP zxr10L2vpnSduRedundancyPrimaryPwPeer | 1.3.6.1.4.1.3902.3.104.10.1.1.5 | IpAddress | read-only | The PW's remote endpoint address. |
| U32 zxr10L2vpnSduRedundancyPrimaryPwVcid | 1.3.6.1.4.1.3902.3.104.10.1.1.6 | Unsigned32 | read-only | A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpoints. |
| L2V zxr10L2vpnSduRedundancyPrimaryPwVcType | 1.3.6.1.4.1.3902.3.104.10.1.1.7 | L2vpnPWType | read-only | A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)'. |
| IP zxr10L2vpnSduRedundancyBackupPwPeer | 1.3.6.1.4.1.3902.3.104.10.1.1.8 | IpAddress | read-only | The PW's remote endpoint address. |
| U32 zxr10L2vpnSduRedundancyBackupPwVcid | 1.3.6.1.4.1.3902.3.104.10.1.1.9 | Unsigned32 | read-only | A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpoints. |
| L2V zxr10L2vpnSduRedundancyBackupPwVcType | 1.3.6.1.4.1.3902.3.104.10.1.1.10 | L2vpnPWType | read-only | A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)'. |
| zxr10L2vpnSacTable | 1.3.6.1.4.1.3902.3.104.10.2 | not-accessible | Sac Table. This table contains one entry per Sac table. | |
| zxr10L2vpnSacEntry | 1.3.6.1.4.1.3902.3.104.10.2.1 | not-accessible | The parameter of a Sac entity containing | |
| STR zxr10L2vpnSacServiceName | 1.3.6.1.4.1.3902.3.104.10.2.1.1 | DisplayString | read-only | The name of the service instance.It consists of 'Forwarder' modules connected by pseudowires and Attach Circuit. |
| STR zxr10L2vpnSacName | 1.3.6.1.4.1.3902.3.104.10.2.1.2 | DisplayString | read-only | The name of Service Attachment Circuit(SAC). |
| INT zxr10L2vpnSacServiceType | 1.3.6.1.4.1.3902.3.104.10.2.1.3 | INTEGER | read-only | The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Virtual Private Wire Service(VPWS),and (3)Virtual Local Switching Service(VLSS),and (4)Enhanced-Virtual Private Wire Service(Enhanced-VPWS) ; |
| INT zxr10L2vpnSacServiceDefine | 1.3.6.1.4.1.3902.3.104.10.2.1.4 | INTEGER | read-only | The parameter of service accesse.There are several parameters of service accesse:(1)ethernt,(2)tdm, (3)ppp,(4)hdlc,(5)fr. |
| INT zxr10L2vpnSacEthSwitchSplitHorizone | 1.3.6.1.4.1.3902.3.104.10.2.1.5 | INTEGER | read-only | Split-horizon attribute which used in E-tree service includes two types client/server |
| INT zxr10L2vpnSacEthIngressAdjustType | 1.3.6.1.4.1.3902.3.104.10.2.1.20 | INTEGER | read-only | The Type of VLAN tag ingress-adjustment.It consists of (1)needless,(2)push,(3)pop-outermost,(4)rewrite |
| I32 zxr10L2vpnSacEthPushedTag | 1.3.6.1.4.1.3902.3.104.10.2.1.21 | Integer32 | read-only | A service-delimiting tag which pushed onto the incoming packets. |
| I32 zxr10L2vpnSacEthRewriteTargetTag | 1.3.6.1.4.1.3902.3.104.10.2.1.22 | Integer32 | read-only | A VLAN tag which rewirted to replace the service-delimiting tags. |
| I32 zxr10L2vpnSacTdmJitterBuffer | 1.3.6.1.4.1.3902.3.104.10.2.1.23 | Integer32 | read-only | The jitter-buffer size of TDM emulation. |
| I32 zxr10L2vpnSacTdmDistributePeriod | 1.3.6.1.4.1.3902.3.104.10.2.1.24 | Integer32 | read-only | Tthe period of distributing TDM packets to remote end-point. |
| U32 zxr10L2vpnSacTdmTimeslots | 1.3.6.1.4.1.3902.3.104.10.2.1.25 | Unsigned32 | read-only | The time of TDM slots. |
| INT zxr10L2vpnSacTdmStructureType | 1.3.6.1.4.1.3902.3.104.10.2.1.26 | INTEGER | read-only | The structure type of TDM emulation. |
| I32 zxr10L2vpnSacEthSwitchGroupID | 1.3.6.1.4.1.3902.3.104.10.2.1.27 | Integer32 | read-only | Split-horizon-Group attribute. |
| INT zxr10L2vpnSacInterworking | 1.3.6.1.4.1.3902.3.104.10.2.1.28 | INTEGER | read-only | The name of SacInterworking. |
| STR zxr10L2vpnSacInterworkingIpLocalCeMac | 1.3.6.1.4.1.3902.3.104.10.2.1.29 | DisplayString | read-only | The LocalCeMac of SacInterworking. |
| zxr10L2vpnRedundancyTable | 1.3.6.1.4.1.3902.3.104.10.3 | not-accessible | Redundancy Table. This table contains one entry per Redundancy table. | |
| zxr10L2vpnRedundancyEntry | 1.3.6.1.4.1.3902.3.104.10.3.1 | not-accessible | The parameter of a Redundancy entity containing | |
| STR zxr10L2vpnRedundancyName | 1.3.6.1.4.1.3902.3.104.10.3.1.1 | DisplayString | read-only | The name of redundency-management. |
| STR zxr10L2vpnRedundancySduName | 1.3.6.1.4.1.3902.3.104.10.3.1.2 | DisplayString | read-only | The name of Service Distribution Unit (SDU) belongs to the exact redundency-management instance. |
| INT zxr10L2vpnRedundancyProtectMode | 1.3.6.1.4.1.3902.3.104.10.3.1.3 | INTEGER | read-only | The protectmode of redundency-management instance. There are two modes: (1)oneByOne, (2)onePlusOne |
| INT zxr10L2vpnRedundancyPfsNegoMode | 1.3.6.1.4.1.3902.3.104.10.3.1.4 | INTEGER | read-only | Configure the negotiation mode which include four modes :(1) unsupported, (2)independent, (3)master, (4)slave. |
| INT zxr10L2vpnRedundancyProtectPolicy | 1.3.6.1.4.1.3902.3.104.10.3.1.5 | INTEGER | read-only | The protect-policy of transforming primary-pw into backup-pw.There are two policies:(1)immediately, (2)delayed. |
| I32 zxr10L2vpnRedundancyProtectDelayTime | 1.3.6.1.4.1.3902.3.104.10.3.1.6 | Integer32 | read-only | The time of transforming primary-pw into backup-pw. |
| INT zxr10L2vpnRedundancyRevertPolicy | 1.3.6.1.4.1.3902.3.104.10.3.1.7 | INTEGER | read-only | The protectpolicy of transforming primary-pw from backup-pw. There are two policies:(1)immediately, (2)delayed. |
| I32 zxr10L2vpnRedundancyRevertDelayTime | 1.3.6.1.4.1.3902.3.104.10.3.1.8 | Integer32 | read-only | The time of transforming primary-pw from backup-pw. |
| INT zxr10L2vpnRedundancyActivePWs | 1.3.6.1.4.1.3902.3.104.10.3.1.9 | INTEGER | read-only | The statues of current active-pws.There are three statues:(1)primary,(2)backup,(3)none. |
| INT zxr10L2vpnRedundancyStandbyPWs | 1.3.6.1.4.1.3902.3.104.10.3.1.10 | INTEGER | read-only | The statues of current standby-pws.There are three statues:(1)primary,(2)backup,(3)none. |
| INT zxr10L2vpnRedundancyInvalidPWs | 1.3.6.1.4.1.3902.3.104.10.3.1.11 | INTEGER | read-only | The statues of current invalid-pws.There are three statues:(1)primary,(2)backup,(3)none. |
| C32 zxr10L2vpnRedundancyProtectionCountEx | 1.3.6.1.4.1.3902.3.104.10.3.1.12 | Counter32 | read-only | The total number of the pws switchover. Transforming primary-pw into backup-pw or transforming primary-pw from backup-pw means one. |
| U32 zxr10L2vpnRedundancyLastProtectionTime | 1.3.6.1.4.1.3902.3.104.10.3.1.13 | Unsigned32 | read-only | The time of the last switchover, which ransform primary-pw into backup-pw or transform primary-pw from backup-pw. |
| zxr10L2vpnPwTable | 1.3.6.1.4.1.3902.3.104.10.4 | not-accessible | Pw Table. This table contains one entry per pw table. | |
| zxr10L2vpnPwEntry | 1.3.6.1.4.1.3902.3.104.10.4.1 | not-accessible | The parameter of a pw entity containing statistics information about a particular PW. | |
| IP zxr10L2vpnPwPeer | 1.3.6.1.4.1.3902.3.104.10.4.1.1 | IpAddress | read-only | The PW's remote endpoint address. |
| U32 zxr10L2vpnPwVcid | 1.3.6.1.4.1.3902.3.104.10.4.1.2 | Unsigned32 | read-only | A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpoints. |
| L2V zxr10L2vpnPwVcType | 1.3.6.1.4.1.3902.3.104.10.4.1.3 | L2vpnPWType | read-only | A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)'. |
| STR zxr10L2vpnPwSduName | 1.3.6.1.4.1.3902.3.104.10.4.1.4 | DisplayString | read-only | The name of Service Distribution Unit (SDU). |
| STR zxr10L2vpnPwServiceName | 1.3.6.1.4.1.3902.3.104.10.4.1.5 | DisplayString | read-only | The name of the service instance.It consists of 'Forwarder' modules connected by pseudowires and Attach Circuit. |
| INT zxr10L2vpnPwServiceType | 1.3.6.1.4.1.3902.3.104.10.4.1.6 | INTEGER | read-only | The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Ethernet over PW,and (3)Multi-segment Pseudowire(MSPW), and (4)Virtual Local Switching Service(VLSS),and (5)Enhanced-Ethernet over Pseudowire |
| INT zxr10L2vpnPwIsMspwSegment | 1.3.6.1.4.1.3902.3.104.10.4.1.7 | INTEGER | read-only | The MSPW's ability weather the PW is MSPW's member. |
| I32 zxr10L2vpnPwLocalLabel | 1.3.6.1.4.1.3902.3.104.10.4.1.8 | Integer32 | read-only | The PW's local label.When egress LER receives a packet over a pseudowire,the PW's local label must be able to determine that the packet was in fact received over a pseudowire associate with a particular pseudowire, and disposites the packet.In an MPLS-enabled IP network, a PW local label is an MPLS label used to identify packet with a PW that belongs to a particular Virtual Private Network. |
| I32 zxr10L2vpnPwRemoteLabel | 1.3.6.1.4.1.3902.3.104.10.4.1.9 | Integer32 | read-only | The PW's remote label.When ingress LER sends a Layer 2 PDU to remote egress LER,it creates an MPLS packets by adding the PW's remote label to the packet,thus creating the first entry of the label stack.The PW's remote label is not visible again until the MPLS packet reaches the egress LER. |
| INT zxr10L2vpnPwSignalType | 1.3.6.1.4.1.3902.3.104.10.4.1.10 | INTEGER | read-only | The type of signaling,including (1)static PW,and (2) the Pwid FEC Element(FEC type 128),and the Generlized Pwid FEC Element(FEC type 129). |
| I32 zxr10L2vpnPwLocalGroupId | 1.3.6.1.4.1.3902.3.104.10.4.1.11 | Integer32 | read-only | The PW's local GroupId value.It is an arbitrary 32-bit value that represents a group of PWs that is used to create groups in the PW space.The group ID is intended to be used as a port index, or a virtual tunnel index.To simplify configuration, a particular PW ID at ingress could be part of the virtual tunnel for transport to the egress router The Group ID is very useful for sending wild card label withdrawals, or PW wild card status notification messages to remote PEs upon physical port failure. |
| INT zxr10L2vpnPwLocalCbit | 1.3.6.1.4.1.3902.3.104.10.4.1.12 | INTEGER | read-only | The PW's local ability weather it is supporting CBit. The bit (C) is used to flag the presence of a control word as follows:C = 1 Control word present on this PW. C = 0 No control word present on this PW. |
| I32 zxr10L2vpnPwLocalMTU | 1.3.6.1.4.1.3902.3.104.10.4.1.13 | Integer32 | read-only | The PW's local MTU value.This is the Maximum Transmission Unit, excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decapsulated PDUthat is received from the MPLS-enabled network. This parameter is applicable only to PWs transporting packets and is REQUIRED for these PW types. If this parameter does not match in both directions of a specific PW, that PW MUST NOT be enabled. |
| STR zxr10L2vpnPwLocalDescription | 1.3.6.1.4.1.3902.3.104.10.4.1.14 | DisplayString | read-only | The PW's local descripton. This arbitrary, and OPTIONAL, interface description string is used to send a human-readable administrative string describing the interface to the remote. This parameter is OPTIONAL and is applicable to all PW types. The interface description parameter string length is variable and can be from 0 to 80 octets. Human-readable text MUST be provided in the UTF-8 charset using the Default Language. |
| U32 zxr10L2vpnPwLocalStatusWord | 1.3.6.1.4.1.3902.3.104.10.4.1.15 | Unsigned32 | read-only | The PW's local status value. Each bit in the status code field can be used to indicate a single failure or an event. When a PW is first set up, the PEs MUST attempt to negotiate the usage of the PW status TLV. |
| INT zxr10L2vpnPwLocalStatusSignalAbility | 1.3.6.1.4.1.3902.3.104.10.4.1.16 | INTEGER | read-only | The PW's local status signal ability. Osbits represents support pw operational status notification, PFSbit represents support preferred forwarding status notification, RSSbit represents support requested switchover status notification, None represents do not support any pw status notification. |
| I32 zxr10L2vpnPwRemoteGroupId | 1.3.6.1.4.1.3902.3.104.10.4.1.17 | Integer32 | read-only | The PW's remote GroupId value.It is an arbitrary 32-bit value that represents a group of PWs that is used to create groups in the PW space.The group ID is intended to be used as a port index, or a virtual tunnel index.To simplify configuration, a particular PW ID at ingress could be part of the virtual tunnel for transport to the egress router The Group ID is very useful for sending wild card label withdrawals, or PW wild card status notification messages to remote PEs upon physical port failure. |
| INT zxr10L2vpnPwRemoteCbit | 1.3.6.1.4.1.3902.3.104.10.4.1.18 | INTEGER | read-only | The PW's remote ability weather it is supporting CBit. The bit (C) is used to flag the presence of a control word as follows:C = 1 Control word present on this PW. C = 0 No control word present on this PW. |
| I32 zxr10L2vpnPwRemoteMTU | 1.3.6.1.4.1.3902.3.104.10.4.1.19 | Integer32 | read-only | The PW's remote MTU value.This is the Maximum Transmission Unit, excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decapsulated PDUthat is received from the MPLS-enabled network. This parameter is applicable only to PWs transporting packets and is REQUIRED for these PW types. If this parameter does not match in both directions of a specific PW, that PW MUST NOT be enabled. |
| STR zxr10L2vpnPwRemoteDescription | 1.3.6.1.4.1.3902.3.104.10.4.1.20 | DisplayString | read-only | The PW's remote descripton. This arbitrary, and OPTIONAL, interface description string is used to send a human-readable administrative string describing the interface to the remote. This parameter is OPTIONAL and is applicable to all PW types. The interface description parameter string length is variable and can be from 0 to 80 octets. Human-readable text MUST be provided in the UTF-8 charset using the Default Language. |
| U32 zxr10L2vpnPwRemoteStatusWord | 1.3.6.1.4.1.3902.3.104.10.4.1.21 | Unsigned32 | read-only | The PW's remote status value. Each bit in the status code field can be used to indicate a single failure or an event. When a PW is first set up, the PEs MUST attempt to negotiate the usage of the PW status TLV. |
| INT zxr10L2vpnPwRemoteStatusSignalAbility | 1.3.6.1.4.1.3902.3.104.10.4.1.22 | INTEGER | read-only | The PW's remote status signal ability. Osbits represents support pw operational status notification, PFSbit represents support preferred forwarding status notification, RSSbit represents support requested switchover status notification, None represents do not support any pw status notification. |
| INT zxr10L2vpnPwNegoedCbit | 1.3.6.1.4.1.3902.3.104.10.4.1.23 | INTEGER | read-only | The PW's negotiated ability weather it is supporting CBit. The bit (C) is used to flag the presence of a control word as follows:C = 1 Control word present on this PW. C = 0 No control word present on this PW. |
| I32 zxr10L2vpnPwNegoedMTU | 1.3.6.1.4.1.3902.3.104.10.4.1.24 | Integer32 | read-only | The PW's negotiated MTU value.This is the Maximum Transmission Unit, excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decapsulated PDUthat is received from the MPLS-enabled network. This parameter is applicable only to PWs transporting packets and is REQUIRED for these PW types. If this parameter does not match in both directions of a specific PW, that PW MUST NOT be enabled. |
| INT zxr10L2vpnPwNegoedStatusSignalAbility | 1.3.6.1.4.1.3902.3.104.10.4.1.25 | INTEGER | read-only | The PW's negotiated status signal ability. Osbits represents support pw operational status notification, PFSbit represents support preferred forwarding status notification, RSSbit represents support requested switchover status notification, None represents do not support any pw status notification. |
| INT zxr10L2vpnPwSignalState | 1.3.6.1.4.1.3902.3.104.10.4.1.26 | INTEGER | read-only | The PW's signal state on protocol level. |
| U32 zxr10L2vpnPwVccvLocalParas | 1.3.6.1.4.1.3902.3.104.10.4.1.27 | Unsigned32 | read-only | The PW's local VCCV value. This VCCV capability information indicates to the receiving PE which combinations of Control Channel (CC) andConnectivity Verification (CV) Types it is capable of receiving. Ifthe receiving PE agrees to establish the PW, it will return its capabilities in the subsequent signaling message to indicate which CC and CV Types it is capable of processing. |
| U32 zxr10L2vpnPwVccvRemoteParas | 1.3.6.1.4.1.3902.3.104.10.4.1.28 | Unsigned32 | read-only | The PW's remote VCCV value. This VCCV capability information indicates to the receiving PE which combinations of Control Channel (CC) andConnectivity Verification (CV) Types it is capable of receiving. Ifthe receiving PE agrees to establish the PW, it will return its capabilities in the subsequent signaling message to indicate which CC and CV Types it is capable of processing. |
| U32 zxr10L2vpnPwVccvNegoedParas | 1.3.6.1.4.1.3902.3.104.10.4.1.29 | Unsigned32 | read-only | The PW's negotiated VCCV value. This VCCV capability information indicates to the receiving PE which combinations of Control Channel (CC) andConnectivity Verification (CV) Types it is capable of receiving. Ifthe receiving PE agrees to establish the PW, it will return its capabilities in the subsequent signaling message to indicate which CC and CV Types it is capable of processing. |
| I32 zxr10L2vpnPwPsnOutLabelDepth | 1.3.6.1.4.1.3902.3.104.10.4.1.30 | Integer32 | read-only | The layer of MPLS label in the packet when it crosses Core Network. |
| I32 zxr10L2vpnPwPsnOutLabel1 | 1.3.6.1.4.1.3902.3.104.10.4.1.31 | Integer32 | read-only | A 20-bit quantity containing a value that represents the botton of MPLS label stack.In L2VPN network, this label means the VC label. |
| I32 zxr10L2vpnPwPsnOutLabel2 | 1.3.6.1.4.1.3902.3.104.10.4.1.32 | Integer32 | read-only | A 20-bit quantity containing a value that represents the second layer of MPLS label stack from the bottom of MPLS label. |
| I32 zxr10L2vpnPwPsnOutLabel3 | 1.3.6.1.4.1.3902.3.104.10.4.1.33 | Integer32 | read-only | A 20-bit quantity containing a value that represents the third layer of MPLS label stack from the bottom of MPLS label. |
| INT zxr10L2vpnPwPsnTunnelType | 1.3.6.1.4.1.3902.3.104.10.4.1.34 | INTEGER | read-only | The tunnel type of Core Network,including (1)LDP label (2)TE label,and (3)BGP label. |
| I32 zxr10L2vpnPwPsnTunnelId | 1.3.6.1.4.1.3902.3.104.10.4.1.35 | Integer32 | read-only | The tunnel ID number of Core Network. |
| INT zxr10L2vpnPwSwitchMacWithdraw | 1.3.6.1.4.1.3902.3.104.10.4.1.36 | INTEGER | read-only | The PW's local ability,whether the PW can send Mac-withdraw message.The bit is used to flag the presence as follows:Switch = 1 can send mac-withdraw message on this PW. Switch = 0 can't sent mac-withdraw message on this PW. |
| INT zxr10L2vpnPwServiceState | 1.3.6.1.4.1.3902.3.104.10.4.1.37 | INTEGER | read-only | The service-state of PW ,including (1)down, and (2) up,and (3)unknown. |
| INT zxr10L2vpnPwWorkState | 1.3.6.1.4.1.3902.3.104.10.4.1.38 | INTEGER | read-only | The work-state of PW ,including (1)down, and (2) active,and (3)standby,and (4)unknown. |
| INT zxr10L2vpnPwSwitchSplitHorizone | 1.3.6.1.4.1.3902.3.104.10.4.1.39 | INTEGER | read-only | Split-horizon attribute which used in E-tree service includes two types on/off |
| I32 zxr10L3vpnPwSwitchGroupID | 1.3.6.1.4.1.3902.3.104.10.4.1.40 | Integer32 | read-only | Split-horizon-Group attribute . |
| zxr10L2vpnServiceTable | 1.3.6.1.4.1.3902.3.104.10.5 | not-accessible | Service Table. This table contains one entry per Service table. | |
| zxr10L2vpnServiceEntry | 1.3.6.1.4.1.3902.3.104.10.5.1 | not-accessible | The parameter of a Service entity containing | |
| STR zxr10L2vpnServiceName | 1.3.6.1.4.1.3902.3.104.10.5.1.1 | DisplayString | read-only | The name of the service instance.It consists of 'Forwarder' modules connected by pseudowires and Attach Circuit. |
| INT zxr10L2vpnServiceType | 1.3.6.1.4.1.3902.3.104.10.5.1.2 | INTEGER | read-only | The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Virtual Private Wire Service(VPWS) (3)Multi-segment Pseudowire(MSPW),and (4)Virtual Local Switching Service(VLSS),and (5)Enhanced-Virtual Private Wire Service(Enhanced-VPWS) |
| STR zxr10L2vpnServiceSac1Name | 1.3.6.1.4.1.3902.3.104.10.5.1.3 | DisplayString | read-only | The first name of Service Attachment Circuit(SAC). |
| STR zxr10L2vpnServiceSac2Name | 1.3.6.1.4.1.3902.3.104.10.5.1.4 | DisplayString | read-only | The second name of Service Attachment Circuit(SAC). |
| STR zxr10L2vpnServiceSdu1Name | 1.3.6.1.4.1.3902.3.104.10.5.1.5 | DisplayString | read-only | The first name of Service Distribution Unit (SDU). |
| STR zxr10L2vpnServiceSdu2Name | 1.3.6.1.4.1.3902.3.104.10.5.1.6 | DisplayString | read-only | The second name of Service Distribution Unit (SDU). |
| I32 zxr10L2vpnServiceMTU | 1.3.6.1.4.1.3902.3.104.10.5.1.7 | Integer32 | read-only | The VPLS's MTU value.This is the Maximum Transmission Unit,excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decapsulated PDUthat is received from the MPLS-enabled network. This parameter is applicable only to PWs transporting packets and is REQUIRED for these PW types.If this parameter does not match in both directions of a specific PW, that PW MUST NOT be enabled. |
| IP zxr10L2vpnServiceMspwFirstPwPeer | 1.3.6.1.4.1.3902.3.104.10.5.1.8 | IpAddress | read-only | The PW's remote endpoint address. |
| U32 zxr10L2vpnServiceMspwFirstPwVcid | 1.3.6.1.4.1.3902.3.104.10.5.1.9 | Unsigned32 | read-only | A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpoints. |
| L2V zxr10L2vpnServiceMspwFirstPWVcType | 1.3.6.1.4.1.3902.3.104.10.5.1.10 | L2vpnPWType | read-only | A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)'. |
| IP zxr10L2vpnServiceMspwSecondPwPeer | 1.3.6.1.4.1.3902.3.104.10.5.1.11 | IpAddress | read-only | The PW's remote endpoint address. |
| U32 zxr10L2vpnServiceMspwSecondPwVcid | 1.3.6.1.4.1.3902.3.104.10.5.1.12 | Unsigned32 | read-only | A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpoints. |
| L2V zxr10L2vpnServiceMspwSecondPwVcType | 1.3.6.1.4.1.3902.3.104.10.5.1.13 | L2vpnPWType | read-only | A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)'. |
| zxr10L2vpnVplsTable | 1.3.6.1.4.1.3902.3.104.10.6 | not-accessible | Vpls Table. This table contains one entry per Vpls table. | |
| zxr10L2vpnVplsEntry | 1.3.6.1.4.1.3902.3.104.10.6.1 | not-accessible | The parameter of a Vpls entity containing | |
| STR zxr10L2vpnVplsName | 1.3.6.1.4.1.3902.3.104.10.6.1.1 | DisplayString | read-only | The name of VPLS instance. |
| INT zxr10L2vpnVplsApplication | 1.3.6.1.4.1.3902.3.104.10.6.1.2 | INTEGER | read-only | The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Enhanced-Virtual Private LAN Service(Enhanced-VPLS), and (3)Enhanced-Virtual Private Wire Service(Enhanced-VPWS) |
| INT zxr10L2vpnVplsModelType | 1.3.6.1.4.1.3902.3.104.10.6.1.3 | INTEGER | read-only | The model of the instance.It consists of (1)rfc4447model2(0) and (2)rfc4447model3(1). |
| I32 zxr10L2vpnVplsServiceMTU | 1.3.6.1.4.1.3902.3.104.10.6.1.4 | Integer32 | read-only | The VPLS's MTU value.This is the Maximum Transmission Unit,excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decapsulated PDUthat is received from the MPLS-enabled network. This parameter is applicable only to PWs transporting packets and is REQUIRED for these PW types.If this parameter does not match in both directions of a specific PW, that PW MUST NOT be enabled. |
| INT zxr10L2vpnVplsSwitchMacLearning | 1.3.6.1.4.1.3902.3.104.10.6.1.5 | INTEGER | read-only | L2vpn VPLS MAC learning switch. |
| INT zxr10L2vpnVplsSwitchMacAging | 1.3.6.1.4.1.3902.3.104.10.6.1.6 | INTEGER | read-only | L2vpn VPLS MAC aging time switch. |
| INT zxr10L2vpnVplsSwitchStatistics | 1.3.6.1.4.1.3902.3.104.10.6.1.7 | INTEGER | read-only | L2vpn VPLS MAC statistics time switch. |
| INT zxr10L2vpnVplsSwitchMacWithdraw | 1.3.6.1.4.1.3902.3.104.10.6.1.8 | INTEGER | read-only | L2vpn VPLS MAC withdraw time switch. |
| I32 zxr10L2vpnVplsTimerMacAging | 1.3.6.1.4.1.3902.3.104.10.6.1.9 | Integer32 | read-only | L2vpn VPLS MAC aging timer. |
| INT zxr10L2vpnVplsAntimovePolicy | 1.3.6.1.4.1.3902.3.104.10.6.1.10 | INTEGER | read-only | L2vpn VPLS anitmove policy. |
| L2V zxr10L2vpnVplsL2ptPolicyLACP | 1.3.6.1.4.1.3902.3.104.10.6.1.11 | L2vpnVplsPolicy | read-only | L2vpn VPLS L2pt policy for LACP. |
| L2V zxr10L2vpnVplsL2ptPolicyDot1X | 1.3.6.1.4.1.3902.3.104.10.6.1.12 | L2vpnVplsPolicy | read-only | L2vpn VPLS L2pt policy for Dot1x. |
| L2V zxr10L2vpnVplsL2ptPolicyGARP | 1.3.6.1.4.1.3902.3.104.10.6.1.13 | L2vpnVplsPolicy | read-only | L2vpn VPLS L2pt policy for GARP. |
| L2V zxr10L2vpnVplsL2ptPolicySTP | 1.3.6.1.4.1.3902.3.104.10.6.1.14 | L2vpnVplsPolicy | read-only | L2vpn VPLS L2pt policy for STP. |
| L2V zxr10L2vpnVplsL2ptPolicyLLDP | 1.3.6.1.4.1.3902.3.104.10.6.1.15 | L2vpnVplsPolicy | read-only | L2vpn VPLS L2pt policy for LLDP. |
| L2V zxr10L2vpnVplsL2ptPolicyDot3X | 1.3.6.1.4.1.3902.3.104.10.6.1.16 | L2vpnVplsPolicy | read-only | L2vpn VPLS L2pt policy for Dot3X. |
| L2V zxr10L2vpnVplsL2ptPolicyALL | 1.3.6.1.4.1.3902.3.104.10.6.1.17 | L2vpnVplsPolicy | read-only | L2vpn VPLS L2pt policy for ALL. |
| L2V zxr10L2vpnVplsL2ptPolicyAllBridgeMulticast | 1.3.6.1.4.1.3902.3.104.10.6.1.18 | L2vpnVplsPolicy | read-only | L2vpn VPLS L2pt policy for AllBridgeMulticast. |
| L2V zxr10L2vpnVplsL2ptPolicyZDPZTP | 1.3.6.1.4.1.3902.3.104.10.6.1.19 | L2vpnVplsPolicy | read-only | L2vpn VPLS L2pt policy for ZDPZTP. |
| zxr10l2vpnGlobalPara | 1.3.6.1.4.1.3902.3.104.10.10 | |||
| U32 zxr10L2vpnGlobalPWCapatity | 1.3.6.1.4.1.3902.3.104.10.10.1 | Unsigned32 | read-only | The summary information about max_num of PWs'configuration. |
| U32 zxr10L2vpnGlobalPWUsed | 1.3.6.1.4.1.3902.3.104.10.10.2 | Unsigned32 | read-only | The summary information about current_num of PWs'configuration. |
| INT zxr10L2vpnEnable | 1.3.6.1.4.1.3902.3.104.10.20 | INTEGER | read-only | Enable L2VPN service. |
RFC description
Layer 2 VPN management for ZTE ZXR10 routers; manages MPLS-based pseudowire and virtual circuit configurations.
Start monitoring ZTE ZXR10 carrier routers/switches (pseudowire capacity/SDU-SAC service-provisioning status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.