All MIBs › ZXROSNG-MAC-MIB
Organization: ZTE Corporation.
Last Updated: 2018-07-13
Category: ZXROSNG Next-Generation Transport
Description: Manages ZTE ZXROSNG MAC address tables, static MAC entries, and Layer 2 forwarding database management.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZXROSNG-MAC-MIB?
ZXROSNG-MAC-MIB is a ZTE enterprise MIB (part of the ZXROS Next-Generation platform) covering Layer 2 MAC address table configuration and status on ZTE switches and routers. It exposes per-VLAN MAC configuration, static MAC entries, and forwarding database status across contexts including VPLS and VPN Layer 2 domains. Its monitoring value is in Layer 2 forwarding health: administrators can check MAC table population per VLAN or port, verify static MAC assignments, and confirm VPLS/VPN MAC status to catch forwarding or learning problems rather than hardware sensor data. It is a vendor-specific module that assumes an underlying ZTE platform MIB structure for interface and VLAN indexing. It is deployed on ZTE ZXROSNG-based carrier or enterprise switching/routing platforms, where ZXROSNG-MAC-MIB SNMP monitoring helps confirm MAC-table health across VLANs and VPLS instances.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZXROSNG-MAC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE ZXROSNG switch/router
Monitoring Examples
An administrator can query zxMacPortStatusTable and zxMacVlanStatusTable to confirm MAC addresses are being learned correctly on specific ports and VLANs, and check zxMacVlanCfgTable for statically configured entries. If zxMacVplsPortStatusTable shows an unexpectedly empty or shrinking MAC count for a VPLS instance, this could indicate a Layer 2 loop, flapping port, or MAC flush event. zxMacGlobalStatus would be checked for overall MAC table health across the device.
What Can Be Monitored
- MAC address table entries per VLAN
- MAC status per port
- VPLS MAC status
- VPN MAC status
- static MAC configuration
This MIB depends on
Related MIBs
Imported Objects
From IPV6-TC
| Ipv6Address |
From SNMPv2-SMI
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| RowStatus |
From ZXR10-SMI
| zxr10RosngMIB | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zxMacMIB | 1.3.6.1.4.1.3902.3.6000.500 | This MIB contains managed object definitions for MAC config and status | ||
| zxMacGlobalObjects | 1.3.6.1.4.1.3902.3.6000.500.1 | |||
| zxMacGlobalCfg | 1.3.6.1.4.1.3902.3.6000.500.1.1 | |||
| INT zxMacGlobalCfgLearnEnable | 1.3.6.1.4.1.3902.3.6000.500.1.1.1 | INTEGER | read-only | Configuration of Global MAC learning. |
| U32 zxMacGlobalCfgLimitMax | 1.3.6.1.4.1.3902.3.6000.500.1.1.2 | Unsigned32 | read-only | Configuration of Global max MAC number. Default value is determined by device. |
| INT zxMacGlobalCfgLimitPolicy | 1.3.6.1.4.1.3902.3.6000.500.1.1.3 | INTEGER | read-only | Configuration of Global max MAC number policy. |
| INT zxMacGlobalCfgHigigLearn | 1.3.6.1.4.1.3902.3.6000.500.1.1.4 | INTEGER | read-only | Configuration of higig learn. |
| U32 zxMacGlobalCfgAlarmThreshold | 1.3.6.1.4.1.3902.3.6000.500.1.1.5 | Unsigned32 | read-only | Configuration of Global alarm threshold. |
| U32 zxMacGlobalCfgAgingTime | 1.3.6.1.4.1.3902.3.6000.500.1.1.6 | Unsigned32 | read-only | Configuration of Global aging time. Default value is determined by device. Zero means not to age. |
| INT zxMacGlobalCfgDefPriMov | 1.3.6.1.4.1.3902.3.6000.500.1.1.7 | INTEGER | read-only | Configuration of MAC movable between port of default priority. |
| INT zxMacGlobalCfgLowPriMov | 1.3.6.1.4.1.3902.3.6000.500.1.1.8 | INTEGER | read-only | Configuration of MAC movable between port of low priority. |
| INT zxMacGlobalCfgNormalPriMov | 1.3.6.1.4.1.3902.3.6000.500.1.1.9 | INTEGER | read-only | Configuration of MAC movable between port of normal priority. |
| INT zxMacGlobalCfgHighPriMov | 1.3.6.1.4.1.3902.3.6000.500.1.1.10 | INTEGER | read-only | Configuration of MAC movable between port of high priority. |
| INT zxMacGlobalCfgAutoWrite | 1.3.6.1.4.1.3902.3.6000.500.1.1.11 | INTEGER | read-only | Configuration of auto write to-permanent MAC to file. |
| U32 zxMacGlobalCfgAutoWriteInterval | 1.3.6.1.4.1.3902.3.6000.500.1.1.12 | Unsigned32 | read-only | Configuration of auto write to-permanent MAC interval. |
| zxMacGlobalStatus | 1.3.6.1.4.1.3902.3.6000.500.1.2 | |||
| U32 zxMacGlobalStatusMacNum | 1.3.6.1.4.1.3902.3.6000.500.1.2.1 | Unsigned32 | read-only | Global current MAC number. |
| U32 zxMacGlobalStatusVplsMacNum | 1.3.6.1.4.1.3902.3.6000.500.1.2.2 | Unsigned32 | read-only | Global current VPLS MAC number. |
| U32 zxMacGlobalStatusVplsAcMacNum | 1.3.6.1.4.1.3902.3.6000.500.1.2.3 | Unsigned32 | read-only | Global current VPLS MAC number of AC port . |
| U32 zxMacGlobalStatusVplsPwMacNum | 1.3.6.1.4.1.3902.3.6000.500.1.2.4 | Unsigned32 | read-only | Global current VPLS MAC number of PW port. |
| INT zxMacGlobalStatusProtected | 1.3.6.1.4.1.3902.3.6000.500.1.2.5 | INTEGER | read-only | Global protect status. |
| U32 zxMacGlobalStatusHisMaxCount | 1.3.6.1.4.1.3902.3.6000.500.1.2.6 | Unsigned32 | read-only | Global history max count. |
| U32 zxMacGlobalStatusStaticMacNum | 1.3.6.1.4.1.3902.3.6000.500.1.2.7 | Unsigned32 | read-only | Global current static MAC number. |
| U32 zxMacGlobalStatusDynamicMacNum | 1.3.6.1.4.1.3902.3.6000.500.1.2.8 | Unsigned32 | read-only | Global current dynamic MAC number. |
| U32 zxMacGlobalStatusPerMacNum | 1.3.6.1.4.1.3902.3.6000.500.1.2.9 | Unsigned32 | read-only | Global current permanent MAC number. |
| U32 zxMacGlobalStatusFiltMacNum | 1.3.6.1.4.1.3902.3.6000.500.1.2.10 | Unsigned32 | read-only | Global current filt MAC number. |
| U32 zxMacGlobalStatusToPerMacNum | 1.3.6.1.4.1.3902.3.6000.500.1.2.11 | Unsigned32 | read-only | Global current topermanent MAC number. |
| zxMacObjects | 1.3.6.1.4.1.3902.3.6000.500.2 | |||
| zxMacVplsPortCfgTable | 1.3.6.1.4.1.3902.3.6000.500.2.1 | not-accessible | Configuration for MAC on VPLS port. | |
| zxMacVplsPortCfgEntry | 1.3.6.1.4.1.3902.3.6000.500.2.1.1 | not-accessible | Configuration for MAC on VPLS port. | |
| STR zxMacVplsPortCfgInstName | 1.3.6.1.4.1.3902.3.6000.500.2.1.1.1 | DisplayString | read-only | VPLS inst name. |
| STR zxMacVplsPortCfgIfName | 1.3.6.1.4.1.3902.3.6000.500.2.1.1.2 | DisplayString | read-only | Port name. |
| U32 zxMacVplsPortCfgIfIndex | 1.3.6.1.4.1.3902.3.6000.500.2.1.1.3 | Unsigned32 | read-only | Port index. |
| U32 zxMacVplsPortCfgEntriesMax | 1.3.6.1.4.1.3902.3.6000.500.2.1.1.4 | Unsigned32 | read-only | Configuration of max MAC number on VPLS port. Default value is determined by device. |
| INT zxMacVplsPortCfgEntriesAction | 1.3.6.1.4.1.3902.3.6000.500.2.1.1.5 | INTEGER | read-only | Configuration of max MAC number action on VPLS port. |
| U32 zxMacVplsPortCfgAgingTime | 1.3.6.1.4.1.3902.3.6000.500.2.1.1.6 | Unsigned32 | read-only | Configuration of aging time on VPLS port. Default value is determined by device. |
| U32 zxMacVplsPortCfgTrafficMax | 1.3.6.1.4.1.3902.3.6000.500.2.1.1.7 | Unsigned32 | read-only | Configuration of traffic rate maximum on VPLS port. 4294967295 means no rate limit. |
| U32 zxMacVplsPortCfgTrbcMaximum | 1.3.6.1.4.1.3902.3.6000.500.2.1.1.8 | Unsigned32 | read-only | Configuration of broadcast limit rate maximum on VPLS port. |
| INT zxMacVplsPortCfgTrbcAction | 1.3.6.1.4.1.3902.3.6000.500.2.1.1.9 | INTEGER | read-only | Configuration of broadcast limit rate action on VPLS port. |
| U32 zxMacVplsPortCfgTrmcMaximum | 1.3.6.1.4.1.3902.3.6000.500.2.1.1.10 | Unsigned32 | read-only | Configuration of multicast limit rate maximum on VPLS port. |
| INT zxMacVplsPortCfgTrmcAction | 1.3.6.1.4.1.3902.3.6000.500.2.1.1.11 | INTEGER | read-only | Configuration of multicast limit rate action on VPLS port. |
| U32 zxMacVplsPortCfgTrucMaximum | 1.3.6.1.4.1.3902.3.6000.500.2.1.1.12 | Unsigned32 | read-only | Configuration of unknow-unicast limit rate maximum on VPLS port. |
| INT zxMacVplsPortCfgTrucAction | 1.3.6.1.4.1.3902.3.6000.500.2.1.1.13 | INTEGER | read-only | Configuration of unknow-unicast limit rate action on VPLS port. |
| U32 zxMacVplsPortCfgTrkcMaximum | 1.3.6.1.4.1.3902.3.6000.500.2.1.1.14 | Unsigned32 | read-only | Configuration of know-unicast limit rate maximum on VPLS port. |
| INT zxMacVplsPortCfgTrkcAction | 1.3.6.1.4.1.3902.3.6000.500.2.1.1.15 | INTEGER | read-only | Configuration of know-unicast limit rate action on VPLS port. |
| zxMacVplsItemCfgTable | 1.3.6.1.4.1.3902.3.6000.500.2.2 | not-accessible | VPLS MAC table. | |
| zxMacVplsItemCfgEntry | 1.3.6.1.4.1.3902.3.6000.500.2.2.1 | not-accessible | VPLS MAC table. | |
| STR zxMacVplsItemCfgVpnName | 1.3.6.1.4.1.3902.3.6000.500.2.2.1.1 | DisplayString | read-only | VPLS name of the MAC address. |
| STR zxMacVplsItemCfgIfName | 1.3.6.1.4.1.3902.3.6000.500.2.2.1.2 | DisplayString | read-only | Port name of the MAC address. |
| MAC zxMacVplsItemCfgMac | 1.3.6.1.4.1.3902.3.6000.500.2.2.1.3 | MacAddress | read-only | MAC address. |
| U32 zxMacVplsItemCfgVlanId | 1.3.6.1.4.1.3902.3.6000.500.2.2.1.4 | Unsigned32 | read-only | VLAN ID of the MAC address. |
| INT zxMacVplsItemCfgMultiflag | 1.3.6.1.4.1.3902.3.6000.500.2.2.1.5 | INTEGER | read-only | Type of the MAC address. |
| STR zxMacVplsItemCfgTime | 1.3.6.1.4.1.3902.3.6000.500.2.2.1.6 | DisplayString | read-only | Time of the MAC address. |
| zxMacVpnCfgTable | 1.3.6.1.4.1.3902.3.6000.500.2.3 | not-accessible | Configuration for MAC on VPLS instance. | |
| zxMacVpnCfgEntry | 1.3.6.1.4.1.3902.3.6000.500.2.3.1 | not-accessible | Configuration for MAC on VPLS instance. | |
| STR zxMacVpnCfgInstName | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.1 | DisplayString | read-only | VPLS instance name. |
| INT zxMacVpnCfgLearnEnable | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.2 | INTEGER | read-only | Configuration of MAC learning on VPLS instance. |
| INT zxMacVpnCfgAntiMove | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.3 | INTEGER | read-only | Configuration of MAC anti-move on VPLS instance. |
| U32 zxMacVpnCfgMacEntriesMax | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.4 | Unsigned32 | read-only | Configuration of max MAC number on VPLS instance. Default value is determined by device. |
| INT zxMacVpnCfgMacEntriesAction | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.5 | INTEGER | read-only | Configuration of max MAC number action on VPLS instance. |
| U32 zxMacVpnCfgVpnId | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.6 | Unsigned32 | read-only | Index of VPLS instance. |
| U32 zxMacVpnCfgAgingTime | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.7 | Unsigned32 | read-only | Configuration of aging time on VPLS instance. Default value is determined by device. |
| INT zxMacVpnCfgRemoteNoLearning | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.8 | INTEGER | read-only | Configuration of remote no learning policy on VPLS instance. |
| INT zxMacVpnCfgL2protocolCtrlPolicy | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.9 | INTEGER | read-only | Configuration of l2pt policy on VPLS instance. |
| INT zxMacVpnCfgStpTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.10 | INTEGER | read-only | Configuration of l2pt policy for STP on VPLS instance. |
| INT zxMacVpnCfgLldpTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.11 | INTEGER | read-only | Configuration of l2pt policy for LLDP on VPLS instance. |
| INT zxMacVpnCfgDot1xTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.12 | INTEGER | read-only | Configuration of l2pt policy for DOT1X on VPLS instance. |
| INT zxMacVpnCfgDot3xTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.13 | INTEGER | read-only | Configuration of l2pt policy for DOT3X on VPLS instance. |
| INT zxMacVpnCfgLacpTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.14 | INTEGER | read-only | Configuration of l2pt policy for LACP on VPLS instance. |
| INT zxMacVpnCfgGarpTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.15 | INTEGER | read-only | Configuration of l2pt policy for GARP on VPLS instance. |
| INT zxMacVpnCfgAllBriMultiTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.16 | INTEGER | read-only | Configuration of l2pt policy for AllBRIDGEMULTIAST on VPLS instance. |
| INT zxMacVpnCfgZdpZtpTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.17 | INTEGER | read-only | Configuration of l2pt policy for ZDPZTP on VPLS instance. |
| U32 zxMacVpnCfgTrafficMax | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.18 | Unsigned32 | read-only | Configuration of traffic limit rate maximum on VPLS instance. |
| U32 zxMacVpnCfgTrbcMaximum | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.19 | Unsigned32 | read-only | Configuration of broadcast limit rate maximum on VPLS instance. |
| INT zxMacVpnCfgTrbcAction | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.20 | INTEGER | read-only | Configuration of broadcast limit rate action on VPLS instance. |
| U32 zxMacVpnCfgTrmcMaximum | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.21 | Unsigned32 | read-only | Configuration of multicast limit rate maximum on VPLS instance. |
| INT zxMacVpnCfgTrmcAction | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.22 | INTEGER | read-only | Configuration of multicast limit rate action on VPLS instance. |
| U32 zxMacVpnCfgTrucMaximum | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.23 | Unsigned32 | read-only | Configuration of unknown-unicast limit rate maximum on VPLS instance. |
| INT zxMacVpnCfgTrucAction | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.24 | INTEGER | read-only | Configuration of unknown-unicast limit rate action on VPLS instance. |
| INT zxMacVpnCfgDefPirMoveEn | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.25 | INTEGER | read-only | Configuration of default priority MAC move policy on VPLS instance. |
| INT zxMacVpnCfgLowerPriMoveEn | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.26 | INTEGER | read-only | Configuration of lower priority MAC move policy on VPLS instance. |
| INT zxMacVpnCfgNormalPriMoveEn | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.27 | INTEGER | read-only | Configuration of normal priority MAC move policy on VPLS instance. |
| INT zxMacVpnCfgHigherPriMoveEn | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.28 | INTEGER | read-only | Configuration of higher priority MAC move policy on VPLS instance. |
| INT zxMacVpnCfgVTPTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.29 | INTEGER | read-only | Configuration of l2pt policy for VTP on VPLS instance. |
| INT zxMacVpnCfgCDPTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.30 | INTEGER | read-only | Configuration of l2pt policy for CDP on VPLS instance. |
| INT zxMacVpnCfgZesrTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.31 | INTEGER | read-only | Configuration of l2pt policy for ZESR on VPLS instance. |
| INT zxMacVpnCfgPvstPlusTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.32 | INTEGER | read-only | Configuration of l2pt policy for PVST+ on VPLS instance. |
| INT zxMacVpnCfgUdldTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.33 | INTEGER | read-only | Configuration of l2pt policy for UDLD on VPLS instance. |
| INT zxMacVpnCfgMstpTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.34 | INTEGER | read-only | Configuration of l2pt policy for MSTP on VPLS instance. |
| INT zxMacVpnCfgRstpTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.35 | INTEGER | read-only | Configuration of l2pt policy for RSTP on VPLS instance. |
| INT zxMacVpnCfgGvrpTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.36 | INTEGER | read-only | Configuration of l2pt policy for GVRP on VPLS instance. |
| INT zxMacVpnCfgMacInMacTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.37 | INTEGER | read-only | Configuration of l2pt policy for MAC in MAC on VPLS instance. |
| INT zxMacVpnCfgEfmTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.38 | INTEGER | read-only | Configuration of l2pt policy for EFM on VPLS instance. |
| INT zxMacVpnCfgCfmTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.39 | INTEGER | read-only | Configuration of l2pt policy for CFM on VPLS instance. |
| INT zxMacVpnCfgY1731Tunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.40 | INTEGER | read-only | Configuration of l2pt policy for Y1731 on VPLS instance. |
| INT zxMacVpnCfgPbbTeTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.41 | INTEGER | read-only | Configuration of l2pt policy for PBB on VPLS instance. |
| STR zxMacVpnCfgUserProtocolName | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.42 | DisplayString | read-only | Configuration of l2pt policy for user protocol template name on VPLS instance. |
| INT zxMacVpnCfgUserProtocolTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.43 | INTEGER | read-only | Configuration of l2pt policy for user protocol on VPLS instance. |
| INT zxMacVpnCfgGmrpTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.44 | INTEGER | read-only | Configuration of l2pt policy for GMRP on VPLS instance. |
| INT zxMacVpnCfgDldpTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.45 | INTEGER | read-only | Configuration of l2pt policy for DLDP on VPLS instance. |
| INT zxMacVpnCfgErpsTunnelled | 1.3.6.1.4.1.3902.3.6000.500.2.3.1.46 | INTEGER | read-only | Configuration of l2pt policy for ERPS on VPLS instance. |
| zxMacVlanCfgTable | 1.3.6.1.4.1.3902.3.6000.500.2.4 | not-accessible | Configuration for MAC on VLAN. | |
| zxMacVlanCfgEntry | 1.3.6.1.4.1.3902.3.6000.500.2.4.1 | not-accessible | Configuration for MAC on VLAN. | |
| U32 zxMacVlanCfgVlanId | 1.3.6.1.4.1.3902.3.6000.500.2.4.1.1 | Unsigned32 | not-accessible | VLAN ID. |
| INT zxMacVlanCfgLearnEnable | 1.3.6.1.4.1.3902.3.6000.500.2.4.1.2 | INTEGER | read-only | Configuration of MAC learning on VLAN. |
| U32 zxMacVlanCfgLimitMax | 1.3.6.1.4.1.3902.3.6000.500.2.4.1.3 | Unsigned32 | read-only | Configuration of max MAC number on VLAN. Default value is determined by device. |
| INT zxMacVlanCfgLimitPolicy | 1.3.6.1.4.1.3902.3.6000.500.2.4.1.4 | INTEGER | read-only | Configuration of max MAC number policy on VLAN. |
| zxMacPortCfgTable | 1.3.6.1.4.1.3902.3.6000.500.2.5 | not-accessible | Configuration for MAC on port. | |
| zxMacPortCfgEntry | 1.3.6.1.4.1.3902.3.6000.500.2.5.1 | not-accessible | Configuration for MAC on port. | |
| STR zxMacPortCfgIfName | 1.3.6.1.4.1.3902.3.6000.500.2.5.1.1 | DisplayString | not-accessible | Port name. |
| INT zxMacPortCfgLearnEnable | 1.3.6.1.4.1.3902.3.6000.500.2.5.1.2 | INTEGER | read-only | Configuration of MAC learning on port. |
| U32 zxMacPortCfgLimitMax | 1.3.6.1.4.1.3902.3.6000.500.2.5.1.3 | Unsigned32 | read-create | Configuration of max MAC number on port. Default value is determined by device. |
| INT zxMacPortCfgLimitPolicy | 1.3.6.1.4.1.3902.3.6000.500.2.5.1.4 | INTEGER | read-only | Configuration of max MAC number policy on port. |
| INT zxMacPortCfgLearnPriority | 1.3.6.1.4.1.3902.3.6000.500.2.5.1.5 | INTEGER | read-only | Configuration of MAC learn priority on Port. |
| INT zxMacPortCfgToPermanent | 1.3.6.1.4.1.3902.3.6000.500.2.5.1.6 | INTEGER | read-only | Configuration of MAC to-permanent on port. |
| ROW zxMacPortCfgRowStatus | 1.3.6.1.4.1.3902.3.6000.500.2.5.1.100 | RowStatus | read-create | This object allows entries to be created and deleted in the zxMacPortCfgTable. |
| zxMacItemCfgTable | 1.3.6.1.4.1.3902.3.6000.500.2.6 | not-accessible | MAC table. | |
| zxMacItemCfgEntry | 1.3.6.1.4.1.3902.3.6000.500.2.6.1 | not-accessible | MAC table. | |
| MAC zxMacItemCfgMac | 1.3.6.1.4.1.3902.3.6000.500.2.6.1.1 | MacAddress | not-accessible | MAC address. |
| U32 zxMacItemCfgVlanId | 1.3.6.1.4.1.3902.3.6000.500.2.6.1.2 | Unsigned32 | not-accessible | VLAN ID of the MAC address. |
| STR zxMacItemCfgIfName | 1.3.6.1.4.1.3902.3.6000.500.2.6.1.3 | DisplayString | read-only | Port name of the MAC address. |
| INT zxMacItemCfgMultiflag | 1.3.6.1.4.1.3902.3.6000.500.2.6.1.4 | INTEGER | read-only | Type of the MAC address. |
| U32 zxMacItemCfgNickName | 1.3.6.1.4.1.3902.3.6000.500.2.6.1.5 | Unsigned32 | read-only | Nickname of the MAC address. |
| STR zxMacItemCfgTime | 1.3.6.1.4.1.3902.3.6000.500.2.6.1.6 | DisplayString | read-only | Time of the MAC address. |
| U32 zxMacItemCfgVxlanId | 1.3.6.1.4.1.3902.3.6000.500.2.6.1.7 | Unsigned32 | read-only | VXLAN of the MAC address. |
| IP zxMacItemCfgRemoteIp | 1.3.6.1.4.1.3902.3.6000.500.2.6.1.8 | IpAddress | read-only | Remote IP of the MAC address. |
| ADR zxMacItemCfgRemoteIpv6 | 1.3.6.1.4.1.3902.3.6000.500.2.6.1.9 | Ipv6Address | read-only | Remote IPv6 of the MAC address. |
| INT zxMacItemCfgRemoteIpType | 1.3.6.1.4.1.3902.3.6000.500.2.6.1.10 | INTEGER | read-only | Remote IP type of the MAC address. |
| zxMacVplsPortStatusTable | 1.3.6.1.4.1.3902.3.6000.500.2.7 | not-accessible | Status for MAC on VPLS port. | |
| zxMacVplsPortStatusEntry | 1.3.6.1.4.1.3902.3.6000.500.2.7.1 | not-accessible | Status for MAC on VPLS port. | |
| STR zxMacVplsPortStatusInstName | 1.3.6.1.4.1.3902.3.6000.500.2.7.1.1 | DisplayString | not-accessible | VPLS instance name. |
| STR zxMacVplsPortStatusIfName | 1.3.6.1.4.1.3902.3.6000.500.2.7.1.2 | DisplayString | not-accessible | Port name. |
| U32 zxMacVplsPortStatusCurrentNum | 1.3.6.1.4.1.3902.3.6000.500.2.7.1.3 | Unsigned32 | read-only | Current MAC number on VPLS port. |
| INT zxMacVplsPortStatusProtected | 1.3.6.1.4.1.3902.3.6000.500.2.7.1.4 | INTEGER | read-only | Protect status on VPLS port. |
| zxMacVpnStatusTable | 1.3.6.1.4.1.3902.3.6000.500.2.8 | not-accessible | Status for MAC on VPLS. | |
| zxMacVpnStatusEntry | 1.3.6.1.4.1.3902.3.6000.500.2.8.1 | not-accessible | Status for MAC on VPLS. | |
| STR zxMacVpnStatusInstName | 1.3.6.1.4.1.3902.3.6000.500.2.8.1.1 | DisplayString | not-accessible | VPLS instance name. |
| U32 zxMacVpnStatusCurrentNum | 1.3.6.1.4.1.3902.3.6000.500.2.8.1.2 | Unsigned32 | read-only | Current MAC number on VPLS. |
| INT zxMacVpnStatusProtected | 1.3.6.1.4.1.3902.3.6000.500.2.8.1.3 | INTEGER | read-only | Protect status on VPLS. |
| zxMacVlanStatusTable | 1.3.6.1.4.1.3902.3.6000.500.2.9 | not-accessible | Status for MAC on VLAN. | |
| zxMacVlanStatusEntry | 1.3.6.1.4.1.3902.3.6000.500.2.9.1 | not-accessible | Status for MAC on VLAN. | |
| U32 zxMacVlanStatusVlanId | 1.3.6.1.4.1.3902.3.6000.500.2.9.1.1 | Unsigned32 | not-accessible | VLAN ID. |
| U32 zxMacVlanStatusCurrentNum | 1.3.6.1.4.1.3902.3.6000.500.2.9.1.2 | Unsigned32 | read-only | Current MAC number on VLAN. |
| INT zxMacVlanStatusProtected | 1.3.6.1.4.1.3902.3.6000.500.2.9.1.3 | INTEGER | read-only | Protect status on VLAN. |
| zxMacPortStatusTable | 1.3.6.1.4.1.3902.3.6000.500.2.10 | not-accessible | Status for MAC on port. | |
| zxMacPortStatusEntry | 1.3.6.1.4.1.3902.3.6000.500.2.10.1 | not-accessible | Status for MAC on port. | |
| STR zxMacPortStatusIfName | 1.3.6.1.4.1.3902.3.6000.500.2.10.1.1 | DisplayString | not-accessible | Port name. |
| U32 zxMacPortStatusCurrentNum | 1.3.6.1.4.1.3902.3.6000.500.2.10.1.2 | Unsigned32 | read-only | Current MAC number on Port. |
| INT zxMacPortStatusProtected | 1.3.6.1.4.1.3902.3.6000.500.2.10.1.3 | INTEGER | read-only | Protect status on Port. |
| U32 zxMacPortStatusStaticMacNum | 1.3.6.1.4.1.3902.3.6000.500.2.10.1.4 | Unsigned32 | read-only | Current static MAC number on Port. |
| U32 zxMacPortStatusDynamicMacNum | 1.3.6.1.4.1.3902.3.6000.500.2.10.1.5 | Unsigned32 | read-only | Current dynamic MAC number on Port. |
| U32 zxMacPortStatusPerMacNum | 1.3.6.1.4.1.3902.3.6000.500.2.10.1.6 | Unsigned32 | read-only | Current permanent MAC number on Port. |
| U32 zxMacPortStatusFiltMacNum | 1.3.6.1.4.1.3902.3.6000.500.2.10.1.7 | Unsigned32 | read-only | Current filt MAC number on Port. |
| U32 zxMacPortStatusToPerMacNum | 1.3.6.1.4.1.3902.3.6000.500.2.10.1.8 | Unsigned32 | read-only | Current topermanent MAC number on Port. |
| zxMacItemOnVlanTable | 1.3.6.1.4.1.3902.3.6000.500.2.11 | not-accessible | MAC table on VLAN. | |
| zxMacItemOnVlanEntry | 1.3.6.1.4.1.3902.3.6000.500.2.11.1 | not-accessible | MAC table on VLAN. | |
| U32 zxMacItemOnVlanVlanId | 1.3.6.1.4.1.3902.3.6000.500.2.11.1.1 | Unsigned32 | not-accessible | VLAN ID of the MAC address. |
| MAC zxMacItemOnVlanMac | 1.3.6.1.4.1.3902.3.6000.500.2.11.1.2 | MacAddress | not-accessible | MAC address. |
| STR zxMacItemOnVlanIfName | 1.3.6.1.4.1.3902.3.6000.500.2.11.1.3 | DisplayString | read-only | Port name of the MAC address. |
| INT zxMacItemOnVlanMultiflag | 1.3.6.1.4.1.3902.3.6000.500.2.11.1.4 | INTEGER | read-only | Type of the MAC address. |
| U32 zxMacItemOnVlanNickName | 1.3.6.1.4.1.3902.3.6000.500.2.11.1.5 | Unsigned32 | read-only | Nickname of the MAC address. |
| STR zxMacItemOnVlanTime | 1.3.6.1.4.1.3902.3.6000.500.2.11.1.6 | DisplayString | read-only | Time of the MAC address. |
| U32 zxMacItemOnVlanVxlanId | 1.3.6.1.4.1.3902.3.6000.500.2.11.1.7 | Unsigned32 | read-only | VXLAN of the MAC address. |
| IP zxMacItemOnVlanRemoteIp | 1.3.6.1.4.1.3902.3.6000.500.2.11.1.8 | IpAddress | read-only | Remote IP of the MAC address. |
| ADR zxMacItemOnVlanRemoteIpv6 | 1.3.6.1.4.1.3902.3.6000.500.2.11.1.9 | Ipv6Address | read-only | Remote IPv6 of the MAC address. |
| INT zxMacItemOnVlanRemoteIpType | 1.3.6.1.4.1.3902.3.6000.500.2.11.1.10 | INTEGER | read-only | Remote IP type of the MAC address. |
| zxMacItemOnPortTable | 1.3.6.1.4.1.3902.3.6000.500.2.12 | not-accessible | MAC table on port. | |
| zxMacItemOnPortEntry | 1.3.6.1.4.1.3902.3.6000.500.2.12.1 | not-accessible | MAC table on port. | |
| STR zxMacItemOnPortIfName | 1.3.6.1.4.1.3902.3.6000.500.2.12.1.1 | DisplayString | not-accessible | Port name of the MAC address. |
| U32 zxMacItemOnPortVlanId | 1.3.6.1.4.1.3902.3.6000.500.2.12.1.2 | Unsigned32 | not-accessible | VLAN ID of the MAC address. |
| MAC zxMacItemOnPortMac | 1.3.6.1.4.1.3902.3.6000.500.2.12.1.3 | MacAddress | not-accessible | MAC address. |
| INT zxMacItemOnPortMultiflag | 1.3.6.1.4.1.3902.3.6000.500.2.12.1.4 | INTEGER | read-only | Type of the MAC address. |
| U32 zxMacItemOnPortNickName | 1.3.6.1.4.1.3902.3.6000.500.2.12.1.5 | Unsigned32 | read-only | Nickname of the MAC address. |
| STR zxMacItemOnPortTime | 1.3.6.1.4.1.3902.3.6000.500.2.12.1.6 | DisplayString | read-only | Time of the MAC address. |
| U32 zxMacItemOnPortVxlanId | 1.3.6.1.4.1.3902.3.6000.500.2.12.1.7 | Unsigned32 | read-only | VXLAN of the MAC address. |
| IP zxMacItemOnPortRemoteIp | 1.3.6.1.4.1.3902.3.6000.500.2.12.1.8 | IpAddress | read-only | Remote IP of the MAC address. |
| ADR zxMacItemOnPortRemoteIpv6 | 1.3.6.1.4.1.3902.3.6000.500.2.12.1.9 | Ipv6Address | read-only | Remote IPv6 of the MAC address. |
| INT zxMacItemOnPortRemoteIpType | 1.3.6.1.4.1.3902.3.6000.500.2.12.1.10 | INTEGER | read-only | Remote IP type of the MAC address. |
| zxMacVxlanItemTable | 1.3.6.1.4.1.3902.3.6000.500.2.13 | not-accessible | VXLAN MAC table. | |
| zxMacVxlanItemEntry | 1.3.6.1.4.1.3902.3.6000.500.2.13.1 | not-accessible | VXLAN MAC table. | |
| MAC zxMacVxlanItemMac | 1.3.6.1.4.1.3902.3.6000.500.2.13.1.1 | MacAddress | not-accessible | MAC address. |
| U32 zxMacVxlanItemVlanId | 1.3.6.1.4.1.3902.3.6000.500.2.13.1.2 | Unsigned32 | not-accessible | VLAN ID of the MAC address. |
| U32 zxMacVxlanItemVxlanId | 1.3.6.1.4.1.3902.3.6000.500.2.13.1.3 | Unsigned32 | not-accessible | VXLAN of the MAC address. |
| STR zxMacVxlanItemIfName | 1.3.6.1.4.1.3902.3.6000.500.2.13.1.4 | DisplayString | read-only | Port name of the MAC address. |
| INT zxMacVxlanItemMultiflag | 1.3.6.1.4.1.3902.3.6000.500.2.13.1.5 | INTEGER | read-only | Type of the MAC address. |
| U32 zxMacVxlanItemTunnelId | 1.3.6.1.4.1.3902.3.6000.500.2.13.1.6 | Unsigned32 | read-only | Tunnel of the MAC address. |
| STR zxMacVxlanItemTime | 1.3.6.1.4.1.3902.3.6000.500.2.13.1.7 | DisplayString | read-only | Time of the MAC address. |
| IP zxMacVxlanItemRemoteIp | 1.3.6.1.4.1.3902.3.6000.500.2.13.1.8 | IpAddress | read-only | Remote IP of the MAC address. |
| ADR zxMacVxlanItemRemoteIpv6 | 1.3.6.1.4.1.3902.3.6000.500.2.13.1.9 | Ipv6Address | read-only | Remote IPv6 of the MAC address. |
| INT zxMacVxlanItemRemoteIpType | 1.3.6.1.4.1.3902.3.6000.500.2.13.1.10 | INTEGER | read-only | Remote IP type of the MAC address. |
| zxMacNotifications | 1.3.6.1.4.1.3902.3.6000.500.3 | |||
| NTF zxMacNotify | 1.3.6.1.4.1.3902.3.6000.500.3.1 | MAC change notify. |
RFC description
Provides MAC address configuration and status management including MAC learning, tunneling, and port-based limiting.
Start monitoring ZTE ZXROSNG switch/router (per-VLAN/VPLS MAC-table config/status status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.