ZXR10-LLDP-MIB

All MIBs › ZXR10-LLDP-MIB

Organization: ZTE Corporation

Last Updated: 2015-11-20

Category: ZTE ZXR10 Layer 2 Switching

Description: Manages ZTE ZXR10 LLDP neighbor discovery, port descriptions, and device topology information exchange.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-LLDP-MIB?

ZXR10-LLDP-MIB is a ZTE Corporation proprietary MIB (ZXR10/ZXROS platform family) implementing LLDP protocol configuration (extending IEEE 802.1AB-2009 over 802.1AB-2005) on ZTE ZXR10 carrier routers/switches. Its objects cover fast-transmit message count, max TX credit, fast-init setting, max-neighbor count, global admin status, and a per-port configuration table (port index, max neighbors, transparent-forwarding enable). As a configuration/status MIB it lets an administrator audit and monitor LLDP protocol configuration (extending IEEE 802.1AB-2009 over 802.1AB-2005) on a ZXR10 platform. It is deployed on ZTE ZXR10 carrier routers/switches. Engineers can download the ZXR10-LLDP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-LLDP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 carrier routers/switches

Monitoring Examples

An administrator reviews this MIB's objects to confirm LLDP protocol configuration (extending IEEE 802.1AB-2009 over 802.1AB-2005) is configured and operating as expected on a ZTE ZXR10 platform.

What Can Be Monitored

LLDP protocol configuration (extending IEEE 802.1AB-2009 over 802.1AB-2005)

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
zte	1.3.6.1.4.1.3902
zxr10	1.3.6.1.4.1.3902.3
zxr10RosngMIB	1.3.6.1.4.1.3902.3.6000
zxr10LldpMIB	1.3.6.1.4.1.3902.3.6000.504			The MIB module to describe part of LLDP protocol data. Include some new variable in 802.1AB-2009 compared with 802.1AB-2005 and some private variable used when the protocol is completed.
zxr10LldpGlobalObjects	1.3.6.1.4.1.3902.3.6000.504.1
U32 lldpV2MessageFastTx	1.3.6.1.4.1.3902.3.6000.504.1.1	Unsigned32	read-write	The interval at which LLDP frames are transmitted on behalf of this LLDP agent during fast transmission period (e.g. when a new neighbor is detected). The default value for lldpV2MessageFastTx object is 1 second. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
U32 lldpV2TxCreditMax	1.3.6.1.4.1.3902.3.6000.504.1.2	Unsigned32	read-write	The maximum number of consecutive LLDPDUs that can be transmitted at any time. The default value for lldpV2TxCreditMax object is 5 PDUs. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
U32 lldpV2TxFastInit	1.3.6.1.4.1.3902.3.6000.504.1.3	Unsigned32	read-write	The initial value used to initialize the txFast variable which determines the number of transmissions that are made in fast transmission mode. The default value for lldpV2TxFastInit object is 4. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
U32 lldpMaxNeighbor	1.3.6.1.4.1.3902.3.6000.504.1.4	Unsigned32	read-write	The Max number of the neighbor to save. The default value for lldpMaxNeighbor object is configured by performance parameter of different projects.
INT lldpGlbAdminStatus	1.3.6.1.4.1.3902.3.6000.504.1.5	INTEGER	read-write	The administratively desired status of the local LLDP agent. If the associated lldpGlbAdminStatus object has a value of 'txOnly(1)', then LLDP agent can transmit LLDP frames on all ports and it will not store any information about the remote systems connected. If the associated lldpGlbAdminStatus object has a value of 'rxOnly(2)', then the LLDP agent can receive, but it will not transmit LLDP frames on all ports. If the associated lldpGlbAdminStatus object has a value of 'txAndRx(3)', then the LLDP agent can transmit and receive LLDP frames on all ports. If the associated lldpGlbAdminStatus object has a value of 'disabled(4)', then LLDP agent will not transmit or receive LLDP frames on all ports. If there is remote systems information which is received and stored, before lldpGlbAdminStatus becomes disabled, then the information will naturally age out.
zxr10LldpObjects	1.3.6.1.4.1.3902.3.6000.504.2
zxr10LldpPortCfgTable	1.3.6.1.4.1.3902.3.6000.504.2.1		not-accessible	The table that controls LLDP private config on individual ports.
zxr10LldpPortCfgEntry	1.3.6.1.4.1.3902.3.6000.504.2.1.1		not-accessible	Part of LLDP configuration information for a particular port. This configuration parameter controls the maxnum neighbor the port can save and whether or not the received.
U32 lldpPortCfgPortIndex	1.3.6.1.4.1.3902.3.6000.504.2.1.1.1	Unsigned32	not-accessible	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the zxr10LldpPortCfgTable.
U32 lldpPortMaxNeighbor	1.3.6.1.4.1.3902.3.6000.504.2.1.1.2	Unsigned32	read-write	The Max number of the neighbor is configured by performance parameter of different projects. The default value for lldpPortMaxNeighbor object is 8.
INT lldpPortTransparentEnable	1.3.6.1.4.1.3902.3.6000.504.2.1.1.3	INTEGER	read-write	The lldpPortTransparentEnable controls, on a per port basis, whether or not the received packets are fowarded. The value true(1) means that the port will foward the received packets; the value disable(2) means that the port will not foward the received packets. It is used in the area of switch, not in the area of router. It is reserved for compatibility.
zxr10LldpNotifications	1.3.6.1.4.1.3902.3.6000.504.3
zxr10LldpConformance	1.3.6.1.4.1.3902.3.6000.504.4

RFC description

Implements Link Layer Discovery Protocol (LLDP) with support for 802.1AB-2009 extensions and neighbor detection management.

Start monitoring ZTE ZXR10 carrier routers/switches (LLDP global/per-port admin-status config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-LLDP-MIB

What Is ZXR10-LLDP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description