ZXR10OPTICALMIB

All MIBs › ZXR10OPTICALMIB

Organization: ZTE Corporation

Last Updated: 2008-10-07

Category: ZTE ZXR10 Interface and Statistics

Description: Monitors ZTE ZXR10 optical transceiver parameters including transmit/receive power, temperature, and module status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10OPTICALMIB?

ZXR10OPTICALMIB is a ZTE private module for ZXR10 devices that queries and configures optical transceiver (SFP/SFP+/XFP-class) module parameters, exposing physical-layer diagnostic data for pluggable optics. It provides hardware-health data including transmit and receive optical power levels, module temperature, and overall transceiver status/presence. This is a strongly hardware-monitoring-oriented MIB: it is used to detect a degrading or failing optical module by watching for receive power dropping toward a sensitivity threshold, transmit power drifting out of spec, or temperature rising abnormally, all of which precede a hard link failure. It commonly parallels the semantics of the standards-based ENTITY-SENSOR-MIB/transceiver DOM (Digital Optical Monitoring) conventions, though implemented as a ZTE-specific model. It is deployed on ZXR10 routers and switches wherever fiber-optic uplinks or transceivers are installed, particularly in metro/core links where proactive optical-health monitoring prevents unplanned outages, typically after a ZXR10OPTICALMIB download to load the module into a MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10OPTICALMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 router/switch (optical transceiver/SFP)

Monitoring Examples

No sample runtime objects were provided for this module, so specific table/object names cannot be cited; conceptually, an operator would poll per-port optical transmit power, receive power, and module temperature on a regular interval to build a baseline for each installed transceiver. A steadily declining receive power reading or a temperature reading approaching the module's rated maximum would provide early warning of an aging or overheating optical transceiver before the link actually fails.

What Can Be Monitored

transmit optical power
receive optical power
transceiver module temperature
transceiver presence/status

Imported Objects

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From ZXR10-SMI

zxr10interfaces

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using zxr10OpticalDisSMFkm OID:

Select a ZTE ZXR10 router/switch (optical transceiver/SFP) (transmit/receive optical-power/temperature status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxr10OpticalDisSMFkm into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the fiber distance of this optical module, measured in single-mode-fiber (SMF) kilometers. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the reported distance changes from its expected provisioned value, since an unexpected change can indicate a fiber patch or link re-routing. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR zxr10Optical33SVoltage	1.3.6.1.4.1.3902.3.103.11.1.1.26	DisplayString	read-only	Optical Module Info 3.3 S_voltage
I32 zxr10Optical33SVoltageValid	1.3.6.1.4.1.3902.3.103.11.1.1.27	Integer32	read-only	Optical Module Info 3.3 S_voltageValid
STR zxr10Optical5SVoltage	1.3.6.1.4.1.3902.3.103.11.1.1.28	DisplayString	read-only	Optical Module Info 5 S_voltage
I32 zxr10Optical5SVoltageValid	1.3.6.1.4.1.3902.3.103.11.1.1.29	Integer32	read-only	Optical Module Info 5 S_voltageValid
I32 zxr10OpticalDis50um	1.3.6.1.4.1.3902.3.103.11.1.1.13	Integer32	read-only	Optical Module Info Dis50_125um
I32 zxr10OpticalDis62um	1.3.6.1.4.1.3902.3.103.11.1.1.14	Integer32	read-only	Optical Module Info Dis62_125um
I32 zxr10OpticalDis9um	1.3.6.1.4.1.3902.3.103.11.1.1.12	Integer32	read-only	Optical Module Info Dis9_125um
I32 zxr10OpticalDiscopperLine	1.3.6.1.4.1.3902.3.103.11.1.1.15	Integer32	read-only	Optical Module Info DiscopperLine
I32 zxr10OpticalDisSMFkmEx	1.3.6.1.4.1.3902.3.103.11.1.1.11	Integer32	read-only	Optical Module Info DisSMFkm
zxr10OpticalEntry	1.3.6.1.4.1.3902.3.103.11.1.1		not-accessible
STR zxr10OpticalFpType	1.3.6.1.4.1.3902.3.103.11.1.1.4	DisplayString	read-only	Optical Module Info FpType
GIG zxr10OpticalGigabitEthernetComplianceCodesSpeed	1.3.6.1.4.1.3902.3.103.11.1.1.8	GigabitEthernetComplianceCodesSpeed	read-only	Gigabit Ethernet Compliance Codes Speed
STR zxr10OpticalGigabitEthernetComplianceCodesType	1.3.6.1.4.1.3902.3.103.11.1.1.7	DisplayString	read-only	Gigabit Ethernet Compliance Codes Type
I32 zxr10OpticalIfIndex	1.3.6.1.4.1.3902.3.103.11.1.1.1	Integer32	read-only	Physical Ethnet interface ifIndex
STR zxr10OpticalIfName	1.3.6.1.4.1.3902.3.103.11.1.1.2	DisplayString	read-only	Physical Ethnet interface ifName
INF zxr10OpticalInfinibandComplianceCodesSpeed	1.3.6.1.4.1.3902.3.103.11.1.1.10	InfinibandComplianceCodesSpeed	read-only	Infiniband Compliance Codes Speed
INF zxr10OpticalInfinibandComplianceCodesType	1.3.6.1.4.1.3902.3.103.11.1.1.9	InfinibandComplianceCodesType	read-only	Infiniband Compliance Codes Type
zxr10OpticalMIB	1.3.6.1.4.1.3902.3.103.11			ZXROS v4.8.30 Optical info query and configuration MIB
OPT zxr10OpticalOnline	1.3.6.1.4.1.3902.3.103.11.1.1.3	OpticalOnline	read-only	Optical Module is Online
STR zxr10OpticalRev	1.3.6.1.4.1.3902.3.103.11.1.1.32	DisplayString	read-only	Optical Module Info Rev
SON zxr10OpticalSonetComplianceCodesSpeed	1.3.6.1.4.1.3902.3.103.11.1.1.6	SonetComplianceCodesSpeed	read-only	Sonet Compliance Codes Speed
SON zxr10OpticalSonetComplianceCodesType	1.3.6.1.4.1.3902.3.103.11.1.1.5	SonetComplianceCodesType	read-only	Sonet Compliance Codes Type
STR zxr10OpticalSRxPower	1.3.6.1.4.1.3902.3.103.11.1.1.18	DisplayString	read-only	Optical Module Info S_rxPower
STR zxr10OpticalSRxPowerChannel1	1.3.6.1.4.1.3902.3.103.11.1.1.34	DisplayString	read-only	Optical Module Info Channel1 S_rxPower
I32 zxr10OpticalSRxPowerChannel1Valid	1.3.6.1.4.1.3902.3.103.11.1.1.35	Integer32	read-only	Optical Module Info Channel1 S_rxPowerValid
STR zxr10OpticalSRxPowerChannel2	1.3.6.1.4.1.3902.3.103.11.1.1.36	DisplayString	read-only	Optical Module Info Channel2 S_rxPower
I32 zxr10OpticalSRxPowerChannel2Valid	1.3.6.1.4.1.3902.3.103.11.1.1.37	Integer32	read-only	Optical Module Info Channel2 S_rxPowerValid
STR zxr10OpticalSRxPowerChannel3	1.3.6.1.4.1.3902.3.103.11.1.1.38	DisplayString	read-only	Optical Module Info Channel3 S_rxPower
I32 zxr10OpticalSRxPowerChannel3Valid	1.3.6.1.4.1.3902.3.103.11.1.1.39	Integer32	read-only	Optical Module Info Channel3 S_rxPowerValid
STR zxr10OpticalSRxPowerChannel4	1.3.6.1.4.1.3902.3.103.11.1.1.40	DisplayString	read-only	Optical Module Info Channel4 S_rxPower
I32 zxr10OpticalSRxPowerChannel4Valid	1.3.6.1.4.1.3902.3.103.11.1.1.41	Integer32	read-only	Optical Module Info Channel4 S_rxPowerValid
I32 zxr10OpticalSRxPowerValid	1.3.6.1.4.1.3902.3.103.11.1.1.19	Integer32	read-only	Optical Module Info S_rxPowerValid
STR zxr10OpticalSTemperature	1.3.6.1.4.1.3902.3.103.11.1.1.24	DisplayString	read-only	Optical Module Info S_temperature
STR zxr10OpticalSTemperatureChannel1	1.3.6.1.4.1.3902.3.103.11.1.1.58	DisplayString	read-only	Optical Module Info Channel1 S_temperature
I32 zxr10OpticalSTemperatureChannel1Valid	1.3.6.1.4.1.3902.3.103.11.1.1.59	Integer32	read-only	Optical Module Info Channel1 S_temperatureValid
STR zxr10OpticalSTemperatureChannel2	1.3.6.1.4.1.3902.3.103.11.1.1.60	DisplayString	read-only	Optical Module Info Channel2 S_temperature
I32 zxr10OpticalSTemperatureChannel2Valid	1.3.6.1.4.1.3902.3.103.11.1.1.61	Integer32	read-only	Optical Module Info Channel2 S_temperatureValid
STR zxr10OpticalSTemperatureChannel3	1.3.6.1.4.1.3902.3.103.11.1.1.62	DisplayString	read-only	Optical Module Info Channel3 S_temperature
I32 zxr10OpticalSTemperatureChannel3Valid	1.3.6.1.4.1.3902.3.103.11.1.1.63	Integer32	read-only	Optical Module Info Channel3 S_temperatureValid
STR zxr10OpticalSTemperatureChannel4	1.3.6.1.4.1.3902.3.103.11.1.1.64	DisplayString	read-only	Optical Module Info Channel4 S_temperature
I32 zxr10OpticalSTemperatureChannel4Valid	1.3.6.1.4.1.3902.3.103.11.1.1.65	Integer32	read-only	Optical Module Info Channel4 S_temperatureValid
I32 zxr10OpticalSTemperatureValid	1.3.6.1.4.1.3902.3.103.11.1.1.25	Integer32	read-only	Optical Module Info S_temperatureValid
STR zxr10OpticalSTxCurrent	1.3.6.1.4.1.3902.3.103.11.1.1.22	DisplayString	read-only	Optical Module Info S_txCurren
STR zxr10OpticalSTxCurrentChannel1	1.3.6.1.4.1.3902.3.103.11.1.1.50	DisplayString	read-only	Optical Module Info Channel1 S_txCurren
I32 zxr10OpticalSTxCurrentChannel1Valid	1.3.6.1.4.1.3902.3.103.11.1.1.51	Integer32	read-only	Optical Module Info Channel1 S_txCurrentValid
STR zxr10OpticalSTxCurrentChannel2	1.3.6.1.4.1.3902.3.103.11.1.1.52	DisplayString	read-only	Optical Module Info Channel2 S_txCurren
I32 zxr10OpticalSTxCurrentChannel2Valid	1.3.6.1.4.1.3902.3.103.11.1.1.53	Integer32	read-only	Optical Module Info Channel2 S_txCurrentValid
STR zxr10OpticalSTxCurrentChannel3	1.3.6.1.4.1.3902.3.103.11.1.1.54	DisplayString	read-only	Optical Module Info Channel3 S_txCurren
I32 zxr10OpticalSTxCurrentChannel3Valid	1.3.6.1.4.1.3902.3.103.11.1.1.55	Integer32	read-only	Optical Module Info Channel3 S_txCurrentValid
STR zxr10OpticalSTxCurrentChannel4	1.3.6.1.4.1.3902.3.103.11.1.1.56	DisplayString	read-only	Optical Module Info Channel4 S_txCurren
I32 zxr10OpticalSTxCurrentChannel4Valid	1.3.6.1.4.1.3902.3.103.11.1.1.57	Integer32	read-only	Optical Module Info Channel4 S_txCurrentValid
I32 zxr10OpticalSTxCurrentValid	1.3.6.1.4.1.3902.3.103.11.1.1.23	Integer32	read-only	Optical Module Info S_txCurrentValid
STR zxr10OpticalSTxPower	1.3.6.1.4.1.3902.3.103.11.1.1.20	DisplayString	read-only	Optical Module Info S_txPower
STR zxr10OpticalSTxPowerChannel1	1.3.6.1.4.1.3902.3.103.11.1.1.42	DisplayString	read-only	Optical Module Info Channel1 S_txPower
I32 zxr10OpticalSTxPowerChannel1Valid	1.3.6.1.4.1.3902.3.103.11.1.1.43	Integer32	read-only	Optical Module Info Channel1 S_txPowerValid
STR zxr10OpticalSTxPowerChannel2	1.3.6.1.4.1.3902.3.103.11.1.1.44	DisplayString	read-only	Optical Module Info Channel2 S_txPower
I32 zxr10OpticalSTxPowerChannel2Valid	1.3.6.1.4.1.3902.3.103.11.1.1.45	Integer32	read-only	Optical Module Info Channel2 S_txPowerValid
STR zxr10OpticalSTxPowerChannel3	1.3.6.1.4.1.3902.3.103.11.1.1.46	DisplayString	read-only	Optical Module Info Channel3 S_txPower
I32 zxr10OpticalSTxPowerChannel3Valid	1.3.6.1.4.1.3902.3.103.11.1.1.47	Integer32	read-only	Optical Module Info Channel3 S_txPowerValid
STR zxr10OpticalSTxPowerChannel4	1.3.6.1.4.1.3902.3.103.11.1.1.48	DisplayString	read-only	Optical Module Info Channel4 S_txPower
I32 zxr10OpticalSTxPowerChannel4Valid	1.3.6.1.4.1.3902.3.103.11.1.1.49	Integer32	read-only	Optical Module Info Channel4 S_txPowerValid
I32 zxr10OpticalSTxPowerValid	1.3.6.1.4.1.3902.3.103.11.1.1.21	Integer32	read-only	Optical Module Info S_txPowerValid
STR zxr10OpticalSWaveLenth	1.3.6.1.4.1.3902.3.103.11.1.1.16	DisplayString	read-only	Optical Module Info S_waveLenth
I32 zxr10OpticalSWaveLenthValid	1.3.6.1.4.1.3902.3.103.11.1.1.17	Integer32	read-only	Optical Module Info S_waveLenthValid
zxr10OpticalTable	1.3.6.1.4.1.3902.3.103.11.1		not-accessible	Ethnet configuration table
STR zxr10OpticalVName	1.3.6.1.4.1.3902.3.103.11.1.1.30	DisplayString	read-only	Optical Module Info VName
STR zxr10OpticalVPn	1.3.6.1.4.1.3902.3.103.11.1.1.31	DisplayString	read-only	Optical Module Info VPn
STR zxr10OpticalVSn	1.3.6.1.4.1.3902.3.103.11.1.1.33	DisplayString	read-only	Optical Module Info VSn

RFC description

Monitors optical interface information including transceiver type, compliance codes, and operational status for fiber links.

Start monitoring ZTE ZXR10 router/switch (optical transceiver/SFP) (transmit/receive optical-power/temperature status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10OPTICALMIB