ZXR10-L2VPN-STAT-MIB

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZXR10-L2VPN-STAT-MIB

Organization: ZTE Corporation

Last Updated: 2014-05-13

Category: ZTE ZXR10 L2VPN and L3VPN

Description: Provides ZTE ZXR10 L2VPN service traffic statistics including packet and byte counters per pseudowire.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-L2VPN-STAT-MIB?

ZXR10-L2VPN-STAT-MIB provides traffic statistics for L2VPN (Layer 2 VPN) services on ZTE's ZXROSNG-based ZXR10 routers, covering packet and byte counters per pseudowire instance and interface. It exposes categories of data centered on L2VPN traffic performance -- inbound/outbound packet counts, byte counts, and likely error/discard counters per pseudowire -- used to characterize the health and utilization of Layer 2 VPN circuits. Its monitoring value is a performance/software-health check: rising discard or error counters on a specific pseudowire would reveal congestion or a transport-layer fault affecting that customer's L2VPN service, while packet/byte counters support capacity planning. It builds on the general pseudowire/L2VPN architecture (PWE3, IETF L2VPN framework) even though the counter objects themselves are ZTE-proprietary. It is typically deployed on ZTE ZXR10 routers in service-provider networks offering Layer 2 VPN (e.g., VPWS/VPLS) services to enterprise customers, where ZXR10-L2VPN-STAT-MIB SNMP monitoring supports both capacity planning and fault isolation per pseudowire.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-L2VPN-STAT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • ZTE ZXR10 router (ZXROSNG platform)

Monitoring Examples

An operator would poll per-pseudowire packet and byte counters to track traffic volume on a specific customer's L2VPN circuit and compare against a subscribed bandwidth profile to detect over-utilization. A sudden drop in packet counters, or a rise in associated discard/error counts, on one pseudowire while others remain normal would point to a fault isolated to that specific L2VPN instance rather than a router-wide issue.

What Can Be Monitored

  • per-pseudowire packet counters
  • per-pseudowire byte counters
  • L2VPN interface traffic statistics
  • discard/error counts per pseudowire
Imported Objects

From SNMPv2-SMI

Counter64
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using zxr10L2vpnStatisRecvPkts OID:

Select a ZTE router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxr10L2vpnStatisRecvPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The received packets count of the instance. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Reports L2VPN traffic statistics including unicast, multicast, and broadcast packet/byte counters.

Start monitoring ZTE routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-L2VPN-STAT-MIB