ZXR10-IP-STATIC-ROUTE-MIB

All MIBs › ZXR10-IP-STATIC-ROUTE-MIB

Organization: ZTE Corp.

Last Updated: 2014-10-29

Category: ZTE ZXR10 IP Routing

Description: Defines ZTE ZXR10 static IPv4 route table entries including destination, next-hop, metric, and administrative distance.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-IP-STATIC-ROUTE-MIB?

ZXR10-IP-STATIC-ROUTE-MIB defines the static IPv4 routing table configuration on ZTE ZXR10 routers, exposing each static route's destination network, next-hop address, metric, and administrative distance. It is a routing-configuration MIB rather than a fault/performance MIB, focused entirely on how manually-provisioned routes are defined on the device. Its monitoring value comes from confirming that expected static routes are present and correctly weighted (via administrative distance/metric) relative to dynamic routing protocols, which is essential software-configuration information when troubleshooting why traffic is or isn't taking an expected path. It parallels the static-route portion of the standard IETF IP-MIB / ipCidrRouteTable model but is implemented as ZTE's own MIB for ZXROS static route management. It is deployed on ZTE ZXR10 series routers wherever static routes are used for traffic engineering, backup paths, or simple network segments without dynamic routing. Engineers can download the ZXR10-IP-STATIC-ROUTE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-IP-STATIC-ROUTE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 series routers

Monitoring Examples

No sample object names were provided for this MIB, but based on module_desc an admin would poll the static route table to confirm a specific destination/next-hop/metric/administrative-distance entry is present and matches the intended configuration; a missing or altered static route entry would explain traffic unexpectedly failing over to a dynamic route or a default gateway.

What Can Be Monitored

static route destination network
next-hop address
route metric
administrative distance

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

From ZXR10-SMI

zxr10

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxR10StaticRouteMib	1.3.6.1.4.1.3902.3.330			ZXR10-IP-STATIC-ROUTE-MIB
zxR10Ipv4StaticRouteTable	1.3.6.1.4.1.3902.3.330.1		not-accessible	A list of current IPv4 static route entries.
zxR10Ipv4StaticRouteEntry	1.3.6.1.4.1.3902.3.330.1.1		not-accessible	An entry containing information applicable to a particular IPv4 static route.
IP zxR10Ipv4SrDest	1.3.6.1.4.1.3902.3.330.1.1.1	IpAddress	read-only	IPv4 Static Route Dest ip address.
INT zxR10Ipv4SrPrefixLen	1.3.6.1.4.1.3902.3.330.1.1.2	INTEGER	read-only	IPv4 Static Route Mask length
STR zxR10Ipv4SrVrfName	1.3.6.1.4.1.3902.3.330.1.1.3	DisplayString	read-only	VRF Name. If this attribute has NULL value, it means that this route belongs to the global table.
INT zxR10Ipv4SrNexthopType	1.3.6.1.4.1.3902.3.330.1.1.4	INTEGER	read-only	Static route nexthop type,as follow: ipv4 address(2), outinterfacename(3), outinterfacename and ipv4(4), otherwise,is invalid(1)
IP zxR10Ipv4SrNexthop	1.3.6.1.4.1.3902.3.330.1.1.5	IpAddress	read-only	The nexthop address of this static route. If zxR10Ipv4SrNexthopType's value is outinterfacename(3) or invalid(1), the zxR10Ipv4SrNexthop is NULL.
STR zxR10Ipv4SrIfName	1.3.6.1.4.1.3902.3.330.1.1.6	DisplayString	read-only	The outinterface name of this static route. If zxR10Ipv4SrNexthopType's value is outinterfacename(3) or outintandipv4(4), the zxR10Ipv4SrNexthop cannot be NULL.
T/F zxR10Ipv4SrNextHopIsGlobal	1.3.6.1.4.1.3902.3.330.1.1.7	TruthValue	read-create	Is the static route nexthop global or not.
U32 zxR10Ipv4SrTag	1.3.6.1.4.1.3902.3.330.1.1.8	Unsigned32	read-create	The tag value of this static route.
INT zxR10Ipv4SrMode	1.3.6.1.4.1.3902.3.330.1.1.9	INTEGER	read-only	The static route mode.
I32 zxR10Ipv4SrMetric	1.3.6.1.4.1.3902.3.330.1.1.10	Integer32	read-create	The static route metric.
I32 zxR10Ipv4SrDetectGroupeNum	1.3.6.1.4.1.3902.3.330.1.1.11	Integer32	read-only	The number of this static route ping detect group.
INT zxR10Ipv4SrStatus	1.3.6.1.4.1.3902.3.330.1.1.12	INTEGER	read-only	This static route's status is down or up.
ROW zxR10Ipv4SrRowStatus	1.3.6.1.4.1.3902.3.330.1.1.13	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxR10Ipv4StaticRouteEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
STR zxR10Ipv4SrTrackSessionName	1.3.6.1.4.1.3902.3.330.1.1.14	DisplayString	read-create	The static route's related track session name.
INT zxR10Ipv4SrDetectType	1.3.6.1.4.1.3902.3.330.1.1.15	INTEGER	read-only	The static route's tracksession is enable or not.
INT zxR10Ipv4SrSlave	1.3.6.1.4.1.3902.3.330.1.1.16	INTEGER	read-only	The static route is a slave route or not.
INT zxR10Ipv4SrBfdEnable	1.3.6.1.4.1.3902.3.330.1.1.17	INTEGER	read-create	The static route's related bfd is disable or enable.
I32 zxR10Ipv4SrDistance	1.3.6.1.4.1.3902.3.330.1.1.18	Integer32	read-create	The distance of this static route.
STR zxR10Ipv4SrName	1.3.6.1.4.1.3902.3.330.1.1.19	DisplayString	read-create	The static route name.
T/F zxR10Ipv4SrPermanent	1.3.6.1.4.1.3902.3.330.1.1.20	TruthValue	read-only	The static route is permanent route or not.
zxR10Ipv4StaticRouteFrrTable	1.3.6.1.4.1.3902.3.330.2		not-accessible	A list of current static route entries for frr.
zxR10Ipv4StaticRouteFrrEntry	1.3.6.1.4.1.3902.3.330.2.1		not-accessible	An entry containing information applicable to static frr route.
STR zxR10Ipv4SrFrrVrfName	1.3.6.1.4.1.3902.3.330.2.1.1	DisplayString	read-only	The VRF name frred on.
INT zxR10Ipv4SrFrrStatus	1.3.6.1.4.1.3902.3.330.2.1.2	INTEGER	read-only	Frr is enable or disable.
I32 zxR10Ipv4SrFrrWtr	1.3.6.1.4.1.3902.3.330.2.1.3	Integer32	read-only	Static route wtr time interval.
zxR10Ipv4StaticRouteGlobals	1.3.6.1.4.1.3902.3.330.3
STR zxR10Ipv4SrNhSourceIfName	1.3.6.1.4.1.3902.3.330.3.1	DisplayString	read-only	The interface bound to static route nexthop source.

RFC description

ZTE ZXR10 IPv4 static route configuration and management for routing tables.

Start monitoring ZTE ZXR10 series routers (static-route destination/next-hop/metric config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-IP-STATIC-ROUTE-MIB

What Is ZXR10-IP-STATIC-ROUTE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description