ZXR10-IPFLOW-MIB

All MIBs › ZXR10-IPFLOW-MIB

Organization: ZTE Corporation

Last Updated: 2015-06-05

Category: ZTE ZXR10 Overlay and Virtualization

Description: Monitors ZTE ZXR10 IP flow statistics and NetFlow-style traffic records for network traffic analysis.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-IPFLOW-MIB?

ZXR10-IPFLOW-MIB monitors IP flow (NetFlow-style) statistics and export records on ZTE ZXR10 routers, capturing traffic flow information for network traffic analysis. It exposes flow-record data including exporter/collector-bound fields such as source IP (IPv4 and IPv6), destination IPv6 address, and DSCP marking of exported flow records, letting an operator analyze which traffic flows are traversing the router and how they're marked. This is a performance/traffic-analytics MIB rather than a hardware/environmental one, but flow export health (whether expected flow records are being generated and exported) is itself a software-status indicator that the flow-monitoring feature is functioning as configured. It is conceptually aligned with IETF IPFIX/NetFlow export concepts, implemented as a ZTE-specific IP flow MIB. It is deployed on ZTE ZXR10 series routers used at network edges or cores where traffic visibility via flow export is required. Engineers can download the ZXR10-IPFLOW-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-IPFLOW-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 series routers

Monitoring Examples

An admin would inspect exported flow records via objects like ipflowExptSrcIp/ipflowExptSrcIpv6 and ipflowExptDestIpv6 to identify which source/destination pairs are generating the most traffic, and check ipflowExptDscp to confirm flows carry the expected QoS marking. An unexpected surge of flows from a single ipflowExptSrcIp with an unusual ipflowExptDscp value could reveal a misbehaving host or misclassified traffic bypassing intended QoS policy.

What Can Be Monitored

exported flow source/destination IP (v4/v6)
flow DSCP marking
flow export record generation

Imported Objects

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
zte	1.3.6.1.4.1.3902
zxr10	1.3.6.1.4.1.3902.3
zxr10Ipflow	1.3.6.1.4.1.3902.3.67			IP FLOW MIB.
ipflowSampleTable	1.3.6.1.4.1.3902.3.67.1		not-accessible	Netflow sample table.
ipflowSampleEntry	1.3.6.1.4.1.3902.3.67.1.1		not-accessible	Netflow sample.
STR ipflowSampleName	1.3.6.1.4.1.3902.3.67.1.1.1	DisplayString	read-only	Sample name.
INT ipflowSampleMethod	1.3.6.1.4.1.3902.3.67.1.1.2	INTEGER	read-only	Sample method.
INT ipflowSampleRate	1.3.6.1.4.1.3902.3.67.1.1.3	INTEGER	read-only	Sample rate.
ipflowExporterTable	1.3.6.1.4.1.3902.3.67.2		not-accessible	Netflow Exporter table.
ipflowExporterEntry	1.3.6.1.4.1.3902.3.67.2.1		not-accessible	Netflow Exporter.
STR ipflowExptName	1.3.6.1.4.1.3902.3.67.2.1.1	DisplayString	read-only	Exporter name.
IP ipflowExptDestIp	1.3.6.1.4.1.3902.3.67.2.1.2	IpAddress	read-only	Exporter destination IP address.
STR ipflowExptDestVrf	1.3.6.1.4.1.3902.3.67.2.1.3	DisplayString	read-only	Exporter destination vrf name.
INT ipflowExptProto	1.3.6.1.4.1.3902.3.67.2.1.4	INTEGER	read-only	Exporter protocol.
INT ipflowExptTplTimeout	1.3.6.1.4.1.3902.3.67.2.1.5	INTEGER	read-only	Exporter template timeout.
INT ipflowExptTplRefresh	1.3.6.1.4.1.3902.3.67.2.1.6	INTEGER	read-only	Exporter template refresh rate.
INT ipflowExptTransProto	1.3.6.1.4.1.3902.3.67.2.1.7	INTEGER	read-only	Exporter transport protocol.
INT ipflowExptTransPort	1.3.6.1.4.1.3902.3.67.2.1.8	INTEGER	read-only	Exporter transport port number.
IP ipflowExptSrcIp	1.3.6.1.4.1.3902.3.67.2.1.9	IpAddress	read-only	Exporter source IP address.
STR ipflowExptSrcIpv6	1.3.6.1.4.1.3902.3.67.2.1.10	DisplayString	read-only	Exporter source IPv6 address.
INT ipflowExptDscp	1.3.6.1.4.1.3902.3.67.2.1.11	INTEGER	read-only	Exporter dscp.
STR ipflowExptDestIpv6	1.3.6.1.4.1.3902.3.67.2.1.12	DisplayString	read-only	Exporter destination IPv6 address.
ipflowRcdCountTable	1.3.6.1.4.1.3902.3.67.3		not-accessible	Netflow Record counting table.
ipflowRcdCountEntry	1.3.6.1.4.1.3902.3.67.3.1		not-accessible	Netflow Record counting.
STR ipflowRcdctName	1.3.6.1.4.1.3902.3.67.3.1.1	DisplayString	read-only	Record name.
INT ipflowRcdMatchNum	1.3.6.1.4.1.3902.3.67.3.1.2	INTEGER	read-only	Record key field number.
INT ipflowRcdCollectNum	1.3.6.1.4.1.3902.3.67.3.1.3	INTEGER	read-only	Record non key field number.
ipflowRecordTable	1.3.6.1.4.1.3902.3.67.4		not-accessible	Netflow Record table.
ipflowRecordEntry	1.3.6.1.4.1.3902.3.67.4.1		not-accessible	Netflow Record.
STR ipflowRecordName	1.3.6.1.4.1.3902.3.67.4.1.1	DisplayString	read-only	Record name.
INT ipflowRcdType	1.3.6.1.4.1.3902.3.67.4.1.2	INTEGER	read-only	Record type.
INT ipflowRcdAtt	1.3.6.1.4.1.3902.3.67.4.1.3	INTEGER	read-only	Record type attribute.
INT ipflowRcdSize	1.3.6.1.4.1.3902.3.67.4.1.4	INTEGER	read-only	Record type size.
ipflowMonitorTable	1.3.6.1.4.1.3902.3.67.5		not-accessible	Netflow monitor table.
ipflowMonitorEntry	1.3.6.1.4.1.3902.3.67.5.1		not-accessible	Netflow monitor.
STR ipflowMonitorName	1.3.6.1.4.1.3902.3.67.5.1.1	DisplayString	read-only	Monitor name.
STR ipflowRcdName	1.3.6.1.4.1.3902.3.67.5.1.2	DisplayString	read-only	Monitor record name.
INT ipflowPreDRcd	1.3.6.1.4.1.3902.3.67.5.1.3	INTEGER	read-only	Monitor predefined record.
STR ipflowExporterName1	1.3.6.1.4.1.3902.3.67.5.1.4	DisplayString	read-only	Monitor exporter1 name.
STR ipflowExporterName2	1.3.6.1.4.1.3902.3.67.5.1.5	DisplayString	read-only	Monitor exproter2 name.
U32 ipflowCacheEntryNum	1.3.6.1.4.1.3902.3.67.5.1.6	Unsigned32	read-only	Monitor cache entry number.
INT ipflowCacheInactiveTit	1.3.6.1.4.1.3902.3.67.5.1.7	INTEGER	read-only	Monitor cache inactive timeout.
INT ipflowCacheActiveTit	1.3.6.1.4.1.3902.3.67.5.1.8	INTEGER	read-only	Monitor cache active timeout.
ipflowIfflowTable	1.3.6.1.4.1.3902.3.67.6		not-accessible	Interface ipflow table.
ipflowIfflowEntry	1.3.6.1.4.1.3902.3.67.6.1		not-accessible	Interface ipflow.
STR ipflowIfName	1.3.6.1.4.1.3902.3.67.6.1.1	DisplayString	read-only	Interface name.
INT ipflowSampleCastType	1.3.6.1.4.1.3902.3.67.6.1.2	INTEGER	read-only	Interface ipflow sample cast type.
STR ipflowAclName	1.3.6.1.4.1.3902.3.67.6.1.3	DisplayString	read-only	Interface ipflow acl name.
INT ipflowSampleDirect	1.3.6.1.4.1.3902.3.67.6.1.4	INTEGER	read-only	Interface ipflow sample direction.
INT ipflowSamplePktPro	1.3.6.1.4.1.3902.3.67.6.1.5	INTEGER	read-only	Interface ipflow sample packet protocol.
STR ipflowSmpName	1.3.6.1.4.1.3902.3.67.6.1.6	DisplayString	read-only	Interface ipflow sampler name.
STR ipflowMntName	1.3.6.1.4.1.3902.3.67.6.1.7	DisplayString	read-only	Interface ipflow monitor name.

RFC description

Manages IP Flow and NetFlow sampling configuration and statistics on ZTE routers for traffic analysis.

Start monitoring ZTE ZXR10 series routers (IP-flow export-record source/destination/DSCP status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-IPFLOW-MIB

What Is ZXR10-IPFLOW-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description