All MIBs › ZXR10-SQA-MIB
Organization: ZTE Corp.
Last Updated: 2016-11-14
Category: ZTE ZXR10 Diagnostics and OAM
Description: Defines ZTE ZXR10 Service Quality Analyzer test operations for active network performance measurement.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZXR10-SQA-MIB?
ZXR10-SQA-MIB is a ZTE proprietary MIB for ZXR10 routers/switches defining the Service Quality Analyzer (SQA) feature, which runs active network performance measurement tests (similar in spirit to IETF IPPM/SAA-style probes) to measure metrics like latency, jitter, or packet loss along a network path. Its data spans configuration of test parameters (targets, schedules, test type) and resulting performance measurement statistics. In monitoring terms, it is used to assess software-driven network performance health rather than physical hardware status, giving operators visibility into path quality degradation that could indicate congestion, routing issues, or link problems. The module description references the ZXROS SMI framework, indicating it builds on ZTE's own SNMP structure-of-management-information conventions rather than a specific external IETF MIB. It is typically deployed in service-provider networks where active probing is used to validate SLA compliance on customer-facing links. Engineers can download the ZXR10-SQA-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-SQA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE ZXR10 router/switch
Monitoring Examples
Only the generic IMPORTS clause appears in sample_objects, so concrete test-result table names cannot be confirmed from the given extract. Conceptually, an operator would configure an SQA test entry specifying a target and measurement type, then poll the resulting statistics objects for round-trip time, jitter, or loss to detect a degrading path before it causes customer-visible issues. Because no specific object names are available, further detail would be speculative.
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| Counter64 | |
| DisplayString | |
| MacAddress | |
| NOTIFICATION-TYPE | |
| RowStatus | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| IP sqaIcmpJitterTestDesIP | 1.3.6.1.4.1.3902.3.6000.132.29.1.3 | IpAddress | read-create | The destination IP address. |
| U32 sqaIcmpJitterTestDscp | 1.3.6.1.4.1.3902.3.6000.132.29.1.10 | Unsigned32 | read-create | The DSCP value,ranges from 0 to 63,255 is the invalid value. |
| sqaIcmpJitterTestEntry | 1.3.6.1.4.1.3902.3.6000.132.29.1 | not-accessible | SQA ICMP jitter test entity configuration table | |
| U32 sqaIcmpJitterTestInterval | 1.3.6.1.4.1.3902.3.6000.132.29.1.9 | Unsigned32 | read-create | The sending period of ICMP packets,ranges from 50 to 65535(default:100),unit:ms. |
| U32 sqaIcmpJitterTestNum | 1.3.6.1.4.1.3902.3.6000.132.29.1.1 | Unsigned32 | not-accessible | SQA test number.The range of this parameter depend on the device. |
| U32 sqaIcmpJitterTestRepeat | 1.3.6.1.4.1.3902.3.6000.132.29.1.5 | Unsigned32 | read-create | The number of repeat times,ranges from 1 to 65535(default:1). |
| ROW sqaIcmpJitterTestRowStatus | 1.3.6.1.4.1.3902.3.6000.132.29.1.11 | RowStatus | read-create | Row status |
| U32 sqaIcmpJitterTestSize | 1.3.6.1.4.1.3902.3.6000.132.29.1.6 | Unsigned32 | read-create | The size of ICMP packet,ranges from 40 to 8192(default:40),unit:byte. |
| IP sqaIcmpJitterTestSorceIP | 1.3.6.1.4.1.3902.3.6000.132.29.1.4 | IpAddress | read-create | The Source IP address. |
| sqaIcmpJitterTestTable | 1.3.6.1.4.1.3902.3.6000.132.29 | not-accessible | SQA ICMP jitter test entity configuration | |
| U32 sqaIcmpJitterTestTos | 1.3.6.1.4.1.3902.3.6000.132.29.1.7 | Unsigned32 | read-create | The TOS value,ranges from 0 to 255(default:0),256 is the invalid value. |
| U32 sqaIcmpJitterTestTtl | 1.3.6.1.4.1.3902.3.6000.132.29.1.8 | Unsigned32 | read-create | The TTL value,ranges from 1 to 255(default:255). |
| STR sqaIcmpJitterTestVrf | 1.3.6.1.4.1.3902.3.6000.132.29.1.2 | DisplayString | read-create | The name of VRF,this string length ranges from 1 to 32. |
| IP sqaIcmpTestDesIP | 1.3.6.1.4.1.3902.3.6000.132.28.1.3 | IpAddress | read-create | The destination IP address. |
| U32 sqaIcmpTestDscp | 1.3.6.1.4.1.3902.3.6000.132.28.1.10 | Unsigned32 | read-create | The DSCP value,ranges from 0 to 63,255 is the invalid value. |
| sqaIcmpTestEntry | 1.3.6.1.4.1.3902.3.6000.132.28.1 | not-accessible | SQA ICMP test entity configuration table | |
| U32 sqaIcmpTestInterval | 1.3.6.1.4.1.3902.3.6000.132.28.1.9 | Unsigned32 | read-create | The sending period of ICMP packets,ranges from 50 to 65535(default:100),unit:ms. |
| U32 sqaIcmpTestNum | 1.3.6.1.4.1.3902.3.6000.132.28.1.1 | Unsigned32 | not-accessible | SQA test number.The range of this parameter depend on the device. |
| U32 sqaIcmpTestRepeat | 1.3.6.1.4.1.3902.3.6000.132.28.1.5 | Unsigned32 | read-create | The number of repeat times,ranges from 1 to 65535(default:1). |
| ROW sqaIcmpTestRowStatus | 1.3.6.1.4.1.3902.3.6000.132.28.1.11 | RowStatus | read-create | Row status |
| U32 sqaIcmpTestSize | 1.3.6.1.4.1.3902.3.6000.132.28.1.6 | Unsigned32 | read-create | The size of ICMP packet,ranges from 36 to 8192(default:36),unit:byte. |
| IP sqaIcmpTestSorceIP | 1.3.6.1.4.1.3902.3.6000.132.28.1.4 | IpAddress | read-create | The Source IP address. |
| sqaIcmpTestTable | 1.3.6.1.4.1.3902.3.6000.132.28 | not-accessible | SQA ICMP test entity configuration | |
| U32 sqaIcmpTestTos | 1.3.6.1.4.1.3902.3.6000.132.28.1.7 | Unsigned32 | read-create | The TOS value,ranges from 0 to 255(default:0),256 is the invalid value. |
| U32 sqaIcmpTestTtl | 1.3.6.1.4.1.3902.3.6000.132.28.1.8 | Unsigned32 | read-create | The TTL value,ranges from 1 to 255(default:255). |
| STR sqaIcmpTestVrf | 1.3.6.1.4.1.3902.3.6000.132.28.1.2 | DisplayString | read-create | The name of VRF,this string length ranges from 1 to 32. |
| sqaMib | 1.3.6.1.4.1.3902.3.6000.132 | ZXROS SMI MIB | ||
| U32 sqaOperationTestNum | 1.3.6.1.4.1.3902.3.6000.132.25.1.1 | Unsigned32 | not-accessible | SQA test number.The range of this parameter depend on the device. |
| sqaTcpServerGrp | 1.3.6.1.4.1.3902.3.6000.132.2 | |||
| IP sqaTcpServerIP | 1.3.6.1.4.1.3902.3.6000.132.2.2 | IpAddress | read-only | sqa tcp server ip |
| U32 sqaTcpServerPort | 1.3.6.1.4.1.3902.3.6000.132.2.3 | Unsigned32 | read-only | sqa tcp server port |
| STR sqaTcpServerVrf | 1.3.6.1.4.1.3902.3.6000.132.2.1 | DisplayString | read-only | sqa tcp server vrf |
| C64 sqaTestDelayResultAvgDelay | 1.3.6.1.4.1.3902.3.6000.132.23.1.9 | Counter64 | read-only | sqa generalflow delay test result avg delay, unit : us |
| C64 sqaTestDelayResultAvgJitter | 1.3.6.1.4.1.3902.3.6000.132.23.1.12 | Counter64 | read-only | sqa generalflow delay test result avg jitter, unit : us |
| U32 sqaTestDelayResultDscp | 1.3.6.1.4.1.3902.3.6000.132.23.1.5 | Unsigned32 | read-only | sqa generalflow delay test result test dscp |
| sqaTestDelayResultEntry | 1.3.6.1.4.1.3902.3.6000.132.23.1 | not-accessible | sqa generalflow delay test result entry | |
| C64 sqaTestDelayResultMaxDelay | 1.3.6.1.4.1.3902.3.6000.132.23.1.8 | Counter64 | read-only | sqa generalflow delay test result max delay, unit : us |
| C64 sqaTestDelayResultMaxJitter | 1.3.6.1.4.1.3902.3.6000.132.23.1.11 | Counter64 | read-only | sqa generalflow delay test result max jitter, unit : us |
| C64 sqaTestDelayResultMinDelay | 1.3.6.1.4.1.3902.3.6000.132.23.1.7 | Counter64 | read-only | sqa generalflow delay test result min delay, unit : us |
| C64 sqaTestDelayResultMinJitter | 1.3.6.1.4.1.3902.3.6000.132.23.1.10 | Counter64 | read-only | sqa generalflow delay test result min jitter, unit : us |
| U32 sqaTestDelayResultPacketSize | 1.3.6.1.4.1.3902.3.6000.132.23.1.2 | Unsigned32 | not-accessible | sqa generalflow delay test packet size, unit : byte |
| U32 sqaTestDelayResultPriority8021p | 1.3.6.1.4.1.3902.3.6000.132.23.1.4 | Unsigned32 | read-only | sqa generalflow delay test result test priority 8021p |
| TES sqaTestDelayResultStatus | 1.3.6.1.4.1.3902.3.6000.132.23.1.14 | TestResultStatus | read-only | sqa generalflow delay test status |
| sqaTestDelayResultTable | 1.3.6.1.4.1.3902.3.6000.132.23 | not-accessible | sqa generalflow delay test result table | |
| U32 sqaTestDelayResultTestDuration | 1.3.6.1.4.1.3902.3.6000.132.23.1.13 | Unsigned32 | read-only | sqa generalflow delay test result duration, unit : s |
| U32 sqaTestDelayResultTestNum | 1.3.6.1.4.1.3902.3.6000.132.23.1.1 | Unsigned32 | not-accessible | sqa generalflow delay test number |
| U32 sqaTestDelayResultTestRate | 1.3.6.1.4.1.3902.3.6000.132.23.1.6 | Unsigned32 | read-only | sqa generalflow delay test result test rate, unit : kbps |
| STR sqaTestDelayResultUniInterface | 1.3.6.1.4.1.3902.3.6000.132.23.1.3 | DisplayString | read-only | sqa generalflow delay test UNI interface |
| IP sqaTestDesIP | 1.3.6.1.4.1.3902.3.6000.132.1.1.4 | IpAddress | read-only | sqa des ip |
| U32 sqaTestDesPort | 1.3.6.1.4.1.3902.3.6000.132.1.1.5 | Unsigned32 | read-only | sqa des port |
| STR sqaTestDestinationUrl | 1.3.6.1.4.1.3902.3.6000.132.1.1.23 | DisplayString | read-only | sqa test destination url |
| U32 sqaTestDnsResultAvgRTT | 1.3.6.1.4.1.3902.3.6000.132.14.1.8 | Unsigned32 | read-only | sqa dns result avg rtt |
| STR sqaTestDnsResultDesurl | 1.3.6.1.4.1.3902.3.6000.132.14.1.11 | DisplayString | read-only | sqa dns result destination url |
| sqaTestDnsResultEntry | 1.3.6.1.4.1.3902.3.6000.132.14.1 | not-accessible | sqa dns result entry | |
| U32 sqaTestDnsResultMaxRTT | 1.3.6.1.4.1.3902.3.6000.132.14.1.7 | Unsigned32 | read-only | sqa dns result max rtt |
| U32 sqaTestDnsResultMinRTT | 1.3.6.1.4.1.3902.3.6000.132.14.1.6 | Unsigned32 | read-only | sqa dns result min rtt |
| STR sqaTestDnsResultProbeTime | 1.3.6.1.4.1.3902.3.6000.132.14.1.10 | DisplayString | read-only | sqa dns result probe time |
| U32 sqaTestDnsResultRepeat | 1.3.6.1.4.1.3902.3.6000.132.14.1.2 | Unsigned32 | read-only | sqa dns result repeat |
| IP sqaTestDnsResultResolvedIP | 1.3.6.1.4.1.3902.3.6000.132.14.1.5 | IpAddress | read-only | sqa dns result resolved ip |
| U32 sqaTestDnsResultResponse | 1.3.6.1.4.1.3902.3.6000.132.14.1.3 | Unsigned32 | read-only | sqa dns result response |
| TES sqaTestDnsResultStatus | 1.3.6.1.4.1.3902.3.6000.132.14.1.4 | TestResultStatus | read-only | sqa dns result status |
| U32 sqaTestDnsResultSumRTT | 1.3.6.1.4.1.3902.3.6000.132.14.1.9 | Unsigned32 | read-only | sqa dns result sum rtt |
| sqaTestDnsResultTable | 1.3.6.1.4.1.3902.3.6000.132.14 | not-accessible | sqa dns result table | |
| INT sqaTestDnsResultTestNum | 1.3.6.1.4.1.3902.3.6000.132.14.1.1 | INTEGER | read-only | sqa dns result test num |
| U32 sqaTestDscp | 1.3.6.1.4.1.3902.3.6000.132.1.1.24 | Unsigned32 | read-only | sqa test dscp,255 is the invalid value |
| sqaTestEntry | 1.3.6.1.4.1.3902.3.6000.132.1.1 | not-accessible | sqa test entity configuration table | |
| STR sqaTestFtpFileName | 1.3.6.1.4.1.3902.3.6000.132.1.1.15 | DisplayString | read-only | sqa test ftp file name |
| STR sqaTestFtpName | 1.3.6.1.4.1.3902.3.6000.132.1.1.13 | DisplayString | read-only | sqa test ftp name |
| STR sqaTestFtpPassword | 1.3.6.1.4.1.3902.3.6000.132.1.1.14 | DisplayString | read-only | sqa test ftp encrypted password, the length of this password is 64 |
| sqaTestFtpResultEntry | 1.3.6.1.4.1.3902.3.6000.132.13.1 | not-accessible | sqa ftp result entry | |
| U32 sqaTestFtpResultLastRTT | 1.3.6.1.4.1.3902.3.6000.132.13.1.3 | Unsigned32 | read-only | sqa ftp result last rtt |
| STR sqaTestFtpResultProbeTime | 1.3.6.1.4.1.3902.3.6000.132.13.1.5 | DisplayString | read-only | sqa ftp result probe time |
| U32 sqaTestFtpResultReadBytes | 1.3.6.1.4.1.3902.3.6000.132.13.1.4 | Unsigned32 | read-only | sqa ftp result read bytes |
| TES sqaTestFtpResultStatus | 1.3.6.1.4.1.3902.3.6000.132.13.1.2 | TestResultStatus | read-only | sqa ftp result test status |
| sqaTestFtpResultTable | 1.3.6.1.4.1.3902.3.6000.132.13 | not-accessible | sqa ftp result table | |
| INT sqaTestFtpResultTestNum | 1.3.6.1.4.1.3902.3.6000.132.13.1.1 | INTEGER | read-only | sqa ftp result test num |
| STR sqaTestFtpRoot | 1.3.6.1.4.1.3902.3.6000.132.1.1.16 | DisplayString | read-only | sqa test ftp root |
| U32 sqaTestHttpResultAvgRTT | 1.3.6.1.4.1.3902.3.6000.132.17.1.24 | Unsigned32 | read-only | sqa http result avg rtt |
| IP sqaTestHttpResultDesIP | 1.3.6.1.4.1.3902.3.6000.132.17.1.5 | IpAddress | read-only | sqa http result des ip |
| STR sqaTestHttpResultDesurl | 1.3.6.1.4.1.3902.3.6000.132.17.1.6 | DisplayString | read-only | sqa http result destination url |
| U32 sqaTestHttpResultDNSAvgRTT | 1.3.6.1.4.1.3902.3.6000.132.17.1.9 | Unsigned32 | read-only | sqa http result dns avg rtt |
| U32 sqaTestHttpResultDNSMaxRTT | 1.3.6.1.4.1.3902.3.6000.132.17.1.8 | Unsigned32 | read-only | sqa http result dns max rtt |
| U32 sqaTestHttpResultDNSMinRTT | 1.3.6.1.4.1.3902.3.6000.132.17.1.7 | Unsigned32 | read-only | sqa http result dns min rtt |
| U32 sqaTestHttpResultDNSNum | 1.3.6.1.4.1.3902.3.6000.132.17.1.11 | Unsigned32 | read-only | sqa http result dns num |
| U32 sqaTestHttpResultDNSSumRTT | 1.3.6.1.4.1.3902.3.6000.132.17.1.10 | Unsigned32 | read-only | sqa http result dns sum rtt |
| sqaTestHttpResultEntry | 1.3.6.1.4.1.3902.3.6000.132.17.1 | not-accessible | sqa http result entry | |
| U32 sqaTestHttpResultHTTPAvgRTT | 1.3.6.1.4.1.3902.3.6000.132.17.1.19 | Unsigned32 | read-only | sqa http result http avg rtt |
| U32 sqaTestHttpResultHTTPMaxRTT | 1.3.6.1.4.1.3902.3.6000.132.17.1.18 | Unsigned32 | read-only | sqa http result http max rtt |
| U32 sqaTestHttpResultHTTPMinRTT | 1.3.6.1.4.1.3902.3.6000.132.17.1.17 | Unsigned32 | read-only | sqa http result http min rtt |
| U32 sqaTestHttpResultHTTPNum | 1.3.6.1.4.1.3902.3.6000.132.17.1.21 | Unsigned32 | read-only | sqa http result http num |
| U32 sqaTestHttpResultHTTPSumRTT | 1.3.6.1.4.1.3902.3.6000.132.17.1.20 | Unsigned32 | read-only | sqa http result http sum rtt |
| U32 sqaTestHttpResultMaxRTT | 1.3.6.1.4.1.3902.3.6000.132.17.1.23 | Unsigned32 | read-only | sqa http result max rtt |
| U32 sqaTestHttpResultMinRTT | 1.3.6.1.4.1.3902.3.6000.132.17.1.22 | Unsigned32 | read-only | sqa http result min rtt |
| STR sqaTestHttpResultProbeTime | 1.3.6.1.4.1.3902.3.6000.132.17.1.26 | DisplayString | read-only | sqa http result probe time |
| U32 sqaTestHttpResultRepeat | 1.3.6.1.4.1.3902.3.6000.132.17.1.2 | Unsigned32 | read-only | sqa http result repeat |
| U32 sqaTestHttpResultResponse | 1.3.6.1.4.1.3902.3.6000.132.17.1.3 | Unsigned32 | read-only | sqa http result response |
| TES sqaTestHttpResultStatus | 1.3.6.1.4.1.3902.3.6000.132.17.1.4 | TestResultStatus | read-only | sqa http result status |
| U32 sqaTestHttpResultSumRTT | 1.3.6.1.4.1.3902.3.6000.132.17.1.25 | Unsigned32 | read-only | sqa http result sum rtt |
| sqaTestHttpResultTable | 1.3.6.1.4.1.3902.3.6000.132.17 | not-accessible | sqa http result table | |
| U32 sqaTestHttpResultTCPAvgRTT | 1.3.6.1.4.1.3902.3.6000.132.17.1.14 | Unsigned32 | read-only | sqa http result tcp avg rtt |
| U32 sqaTestHttpResultTCPMaxRTT | 1.3.6.1.4.1.3902.3.6000.132.17.1.13 | Unsigned32 | read-only | sqa http result tcp max rtt |
| U32 sqaTestHttpResultTCPMinRTT | 1.3.6.1.4.1.3902.3.6000.132.17.1.12 | Unsigned32 | read-only | sqa http result tcp min rtt |
| U32 sqaTestHttpResultTCPNum | 1.3.6.1.4.1.3902.3.6000.132.17.1.16 | Unsigned32 | read-only | sqa http result tcp num |
| U32 sqaTestHttpResultTCPSumRTT | 1.3.6.1.4.1.3902.3.6000.132.17.1.15 | Unsigned32 | read-only | sqa http result tcp sum rtt |
| INT sqaTestHttpResultTestNum | 1.3.6.1.4.1.3902.3.6000.132.17.1.1 | INTEGER | read-only | sqa http result test num |
| U32 sqaTestIcmpJitterResultAvgNegDS | 1.3.6.1.4.1.3902.3.6000.132.18.1.28 | Unsigned32 | read-only | sqa icmp jitter result avg neg ds |
| U32 sqaTestIcmpJitterResultAvgNegSD | 1.3.6.1.4.1.3902.3.6000.132.18.1.20 | Unsigned32 | read-only | sqa icmp jitter result avg neg sd |
| U32 sqaTestIcmpJitterResultAvgPosDS | 1.3.6.1.4.1.3902.3.6000.132.18.1.24 | Unsigned32 | read-only | sqa icmp jitter result avg pos ds |
| U32 sqaTestIcmpJitterResultAvgPosSD | 1.3.6.1.4.1.3902.3.6000.132.18.1.16 | Unsigned32 | read-only | sqa icmp jitter result avg pos sd |
| U32 sqaTestIcmpJitterResultAvgRTTDS | 1.3.6.1.4.1.3902.3.6000.132.18.1.12 | Unsigned32 | read-only | sqa icmp jitter result avg rtt ds |
| U32 sqaTestIcmpJitterResultAvgRTTSD | 1.3.6.1.4.1.3902.3.6000.132.18.1.8 | Unsigned32 | read-only | sqa icmp jitter result avg rtt sd |
| IP sqaTestIcmpJitterResultDesIP | 1.3.6.1.4.1.3902.3.6000.132.18.1.5 | IpAddress | read-only | sqa icmp jitter result des ip |
| sqaTestIcmpJitterResultEntry | 1.3.6.1.4.1.3902.3.6000.132.18.1 | not-accessible | sqa icmp jitter result entry | |
| U32 sqaTestIcmpJitterResultMaxNegDS | 1.3.6.1.4.1.3902.3.6000.132.18.1.27 | Unsigned32 | read-only | sqa icmp jitter result max neg ds |
| U32 sqaTestIcmpJitterResultMaxNegSD | 1.3.6.1.4.1.3902.3.6000.132.18.1.19 | Unsigned32 | read-only | sqa icmp jitter result max neg sd |
| U32 sqaTestIcmpJitterResultMaxPosDS | 1.3.6.1.4.1.3902.3.6000.132.18.1.23 | Unsigned32 | read-only | sqa icmp jitter result max pos ds |
| U32 sqaTestIcmpJitterResultMaxPosSD | 1.3.6.1.4.1.3902.3.6000.132.18.1.15 | Unsigned32 | read-only | sqa icmp jitter result max pos sd |
| U32 sqaTestIcmpJitterResultMaxRTTDS | 1.3.6.1.4.1.3902.3.6000.132.18.1.11 | Unsigned32 | read-only | sqa udp jitter result max rtt ds |
| U32 sqaTestIcmpJitterResultMaxRTTSD | 1.3.6.1.4.1.3902.3.6000.132.18.1.7 | Unsigned32 | read-only | sqa icmp jitter result max rtt sd |
| U32 sqaTestIcmpJitterResultMinNegDS | 1.3.6.1.4.1.3902.3.6000.132.18.1.26 | Unsigned32 | read-only | sqa icmp jitter result min neg ds |
| U32 sqaTestIcmpJitterResultMinNegSD | 1.3.6.1.4.1.3902.3.6000.132.18.1.18 | Unsigned32 | read-only | sqa icmp jitter result min neg sd |
| U32 sqaTestIcmpJitterResultMinPosDS | 1.3.6.1.4.1.3902.3.6000.132.18.1.22 | Unsigned32 | read-only | sqa icmp jitter result min pos ds |
| U32 sqaTestIcmpJitterResultMinPosSD | 1.3.6.1.4.1.3902.3.6000.132.18.1.14 | Unsigned32 | read-only | sqa icmp jitter result min pos sd |
| U32 sqaTestIcmpJitterResultMinRTTDS | 1.3.6.1.4.1.3902.3.6000.132.18.1.10 | Unsigned32 | read-only | sqa icmp jitter result min rtt ds |
| U32 sqaTestIcmpJitterResultMinRTTSD | 1.3.6.1.4.1.3902.3.6000.132.18.1.6 | Unsigned32 | read-only | sqa icmp jitter result min rtt sd |
| STR sqaTestIcmpJitterResultProbeTime | 1.3.6.1.4.1.3902.3.6000.132.18.1.30 | DisplayString | read-only | sqa icmp jitterresult probe time |
| U32 sqaTestIcmpJitterResultRepeat | 1.3.6.1.4.1.3902.3.6000.132.18.1.2 | Unsigned32 | read-only | sqa icmp jitter result repeat |
| U32 sqaTestIcmpJitterResultResponse | 1.3.6.1.4.1.3902.3.6000.132.18.1.3 | Unsigned32 | read-only | sqa icmp jitter result response |
| TES sqaTestIcmpJitterResultStatus | 1.3.6.1.4.1.3902.3.6000.132.18.1.4 | TestResultStatus | read-only | sqa icmp jitter result status |
| U32 sqaTestIcmpJitterResultSumNegDS | 1.3.6.1.4.1.3902.3.6000.132.18.1.29 | Unsigned32 | read-only | sqa icmp jitter result sum neg ds |
| U32 sqaTestIcmpJitterResultSumNegSD | 1.3.6.1.4.1.3902.3.6000.132.18.1.21 | Unsigned32 | read-only | sqa icmp jitter result sum neg sd |
| U32 sqaTestIcmpJitterResultSumPosDS | 1.3.6.1.4.1.3902.3.6000.132.18.1.25 | Unsigned32 | read-only | sqa icmp jitter result sum pos ds |
| U32 sqaTestIcmpJitterResultSumPosSD | 1.3.6.1.4.1.3902.3.6000.132.18.1.17 | Unsigned32 | read-only | sqa icmp jitter result sum pos sd |
| U32 sqaTestIcmpJitterResultSumRTTDS | 1.3.6.1.4.1.3902.3.6000.132.18.1.13 | Unsigned32 | read-only | sqa icmp jitter result sum rtt ds |
| U32 sqaTestIcmpJitterResultSumRTTSD | 1.3.6.1.4.1.3902.3.6000.132.18.1.9 | Unsigned32 | read-only | sqa icmp jitter result sum rtt sd |
| sqaTestIcmpJitterResultTable | 1.3.6.1.4.1.3902.3.6000.132.18 | not-accessible | sqa icmp jitter result table | |
| INT sqaTestIcmpJitterResultTestNum | 1.3.6.1.4.1.3902.3.6000.132.18.1.1 | INTEGER | read-only | sqa icmp jitter result test num |
| U32 sqaTestIcmpResultAvgJitter | 1.3.6.1.4.1.3902.3.6000.132.10.1.22 | Unsigned32 | read-only | sqa icmp result avg jitter |
| U32 sqaTestIcmpResultAvgNegJitter | 1.3.6.1.4.1.3902.3.6000.132.10.1.18 | Unsigned32 | read-only | sqa icmp result avg neg jitter |
| U32 sqaTestIcmpResultAvgPosJitter | 1.3.6.1.4.1.3902.3.6000.132.10.1.14 | Unsigned32 | read-only | sqa icmp result avg pos jitter |
| U32 sqaTestIcmpResultAvgRTT | 1.3.6.1.4.1.3902.3.6000.132.10.1.8 | Unsigned32 | read-only | sqa icmp result avg rtt |
| IP sqaTestIcmpResultDesIP | 1.3.6.1.4.1.3902.3.6000.132.10.1.5 | IpAddress | read-only | sqa icmp result des ip |
| sqaTestIcmpResultEntry | 1.3.6.1.4.1.3902.3.6000.132.10.1 | not-accessible | sqa icmp result entry | |
| U32 sqaTestIcmpResultMaxJitter | 1.3.6.1.4.1.3902.3.6000.132.10.1.21 | Unsigned32 | read-only | sqa icmp result max jitter |
| U32 sqaTestIcmpResultMaxNegJitter | 1.3.6.1.4.1.3902.3.6000.132.10.1.17 | Unsigned32 | read-only | sqa icmp result max neg jitter |
| U32 sqaTestIcmpResultMaxPosJitter | 1.3.6.1.4.1.3902.3.6000.132.10.1.13 | Unsigned32 | read-only | sqa icmp result max pos jitter |
| U32 sqaTestIcmpResultMaxRTT | 1.3.6.1.4.1.3902.3.6000.132.10.1.7 | Unsigned32 | read-only | sqa icmp result max rtt |
| U32 sqaTestIcmpResultMinJitter | 1.3.6.1.4.1.3902.3.6000.132.10.1.20 | Unsigned32 | read-only | sqa icmp result min jitter |
| U32 sqaTestIcmpResultMinNegJitter | 1.3.6.1.4.1.3902.3.6000.132.10.1.16 | Unsigned32 | read-only | sqa icmp result min neg jitter |
| U32 sqaTestIcmpResultMinPosJitter | 1.3.6.1.4.1.3902.3.6000.132.10.1.12 | Unsigned32 | read-only | sqa icmp result min pos jitter |
| U32 sqaTestIcmpResultMinRTT | 1.3.6.1.4.1.3902.3.6000.132.10.1.6 | Unsigned32 | read-only | sqa icmp result min rtt |
| STR sqaTestIcmpResultPacketLossRate | 1.3.6.1.4.1.3902.3.6000.132.10.1.11 | DisplayString | read-only | sqa icmp result packet loss rate |
| STR sqaTestIcmpResultProbeTime | 1.3.6.1.4.1.3902.3.6000.132.10.1.10 | DisplayString | read-only | sqa icmp result probe time |
| U32 sqaTestIcmpResultRepeat | 1.3.6.1.4.1.3902.3.6000.132.10.1.2 | Unsigned32 | read-only | sqa icmp result repeat |
| U32 sqaTestIcmpResultResponse | 1.3.6.1.4.1.3902.3.6000.132.10.1.3 | Unsigned32 | read-only | sqa icmp result response |
| TES sqaTestIcmpResultStatus | 1.3.6.1.4.1.3902.3.6000.132.10.1.4 | TestResultStatus | read-only | sqa icmp result status |
| U32 sqaTestIcmpResultSumJitter | 1.3.6.1.4.1.3902.3.6000.132.10.1.23 | Unsigned32 | read-only | sqa icmp result sum jitter |
| U32 sqaTestIcmpResultSumNegJitter | 1.3.6.1.4.1.3902.3.6000.132.10.1.19 | Unsigned32 | read-only | sqa icmp result sum neg jitter |
| U32 sqaTestIcmpResultSumPosJitter | 1.3.6.1.4.1.3902.3.6000.132.10.1.15 | Unsigned32 | read-only | sqa icmp result sum pos jitter |
| U32 sqaTestIcmpResultSumRTT | 1.3.6.1.4.1.3902.3.6000.132.10.1.9 | Unsigned32 | read-only | sqa icmp result sum rtt |
| sqaTestIcmpResultTable | 1.3.6.1.4.1.3902.3.6000.132.10 | not-accessible | sqa icmp result table | |
| INT sqaTestIcmpResultTestNum | 1.3.6.1.4.1.3902.3.6000.132.10.1.1 | INTEGER | read-only | sqa icmp test num |
| U32 sqaTestInterval | 1.3.6.1.4.1.3902.3.6000.132.1.1.12 | Unsigned32 | read-only | sqa test interval |
| U32 sqaTestLossResultDscp | 1.3.6.1.4.1.3902.3.6000.132.22.1.5 | Unsigned32 | read-only | sqa generalflow loss test result test dscp |
| sqaTestLossResultEntry | 1.3.6.1.4.1.3902.3.6000.132.22.1 | not-accessible | sqa generalflow loss test result entry | |
| U32 sqaTestLossResultLossPktNumber | 1.3.6.1.4.1.3902.3.6000.132.22.1.7 | Unsigned32 | read-only | sqa generalflow loss test loss packet number |
| U32 sqaTestLossResultLossPktRatio | 1.3.6.1.4.1.3902.3.6000.132.22.1.8 | Unsigned32 | read-only | sqa generalflow loss test result loss packet ratio, unit : 1/10000 |
| U32 sqaTestLossResultPacketSize | 1.3.6.1.4.1.3902.3.6000.132.22.1.2 | Unsigned32 | not-accessible | sqa generalflow loss test packet size, unit : byte |
| U32 sqaTestLossResultPriority8021p | 1.3.6.1.4.1.3902.3.6000.132.22.1.4 | Unsigned32 | read-only | sqa generalflow loss test result test priority 8021p |
| TES sqaTestLossResultStatus | 1.3.6.1.4.1.3902.3.6000.132.22.1.10 | TestResultStatus | read-only | sqa generalflow loss test status |
| sqaTestLossResultTable | 1.3.6.1.4.1.3902.3.6000.132.22 | not-accessible | sqa generalflow loss test result table | |
| U32 sqaTestLossResultTestDuration | 1.3.6.1.4.1.3902.3.6000.132.22.1.9 | Unsigned32 | read-only | sqa generalflow loss test result duration, unit : s |
| U32 sqaTestLossResultTestNum | 1.3.6.1.4.1.3902.3.6000.132.22.1.1 | Unsigned32 | not-accessible | sqa generalflow loss test number |
| U32 sqaTestLossResultTestRate | 1.3.6.1.4.1.3902.3.6000.132.22.1.6 | Unsigned32 | read-only | sqa generalflow loss test result test rate, unit : kbps |
| STR sqaTestLossResultUniInterface | 1.3.6.1.4.1.3902.3.6000.132.22.1.3 | DisplayString | read-only | sqa generalflow loss test UNI interface |
| U32 sqaTestNum | 1.3.6.1.4.1.3902.3.6000.132.1.1.1 | Unsigned32 | read-only | sqa test num. The range of this parameter depend on the device. |
| TES sqaTestOperation | 1.3.6.1.4.1.3902.3.6000.132.25.1.2 | TestOperation | read-create | SQA test operation type,1 means begin,2 means stop. |
| sqaTestOperationEntry | 1.3.6.1.4.1.3902.3.6000.132.25.1 | not-accessible | SQA test operation entity configuration table | |
| sqaTestOperationTable | 1.3.6.1.4.1.3902.3.6000.132.25 | not-accessible | SQA test operation configuration | |
| U32 sqaTestReflectorAgeingTime | 1.3.6.1.4.1.3902.3.6000.132.20.1.7 | Unsigned32 | read-only | sqa reflector ageing time, 0 : continuous |
| IP sqaTestReflectorDestinationIp | 1.3.6.1.4.1.3902.3.6000.132.20.1.11 | IpAddress | read-only | sqa reflector destination ip |
| MAC sqaTestReflectorDestinationMac | 1.3.6.1.4.1.3902.3.6000.132.20.1.9 | MacAddress | read-only | sqa reflector destination mac |
| U32 sqaTestReflectorDestinationPort | 1.3.6.1.4.1.3902.3.6000.132.20.1.13 | Unsigned32 | read-only | sqa reflector destination port, default: 7 |
| U32 sqaTestReflectorDisNonTest8021p | 1.3.6.1.4.1.3902.3.6000.132.20.1.5 | Unsigned32 | read-only | sqa reflector disNonTest8021p, 255: undefined(invalid) |
| U32 sqaTestReflectorDisNonTestDscp | 1.3.6.1.4.1.3902.3.6000.132.20.1.6 | Unsigned32 | read-only | sqa reflector disNonTestDscp, 255: undefined(invalid) |
| U32 sqaTestReflectorDscp | 1.3.6.1.4.1.3902.3.6000.132.20.1.18 | Unsigned32 | read-only | sqa reflector DSCP, 255: undefined(invalid) |
| sqaTestReflectorEntry | 1.3.6.1.4.1.3902.3.6000.132.20.1 | not-accessible | sqa generalflow reflector entry | |
| U32 sqaTestReflectorExternalVlanId | 1.3.6.1.4.1.3902.3.6000.132.20.1.16 | Unsigned32 | read-only | sqa reflector external vlan id |
| TES sqaTestReflectorFreeArpEnable | 1.3.6.1.4.1.3902.3.6000.132.20.1.20 | TestEnableStatus | read-only | sqa reflector free arp enable state |
| U32 sqaTestReflectorFreeArpExVlanId | 1.3.6.1.4.1.3902.3.6000.132.20.1.24 | Unsigned32 | read-only | sqa reflector free arp external vlan id |
| U32 sqaTestReflectorFreeArpInterval | 1.3.6.1.4.1.3902.3.6000.132.20.1.25 | Unsigned32 | read-only | sqa reflector free arp send interval, unit : s |
| U32 sqaTestReflectorFreeArpInVlanId | 1.3.6.1.4.1.3902.3.6000.132.20.1.23 | Unsigned32 | read-only | sqa reflector free arp internal vlan id |
| IP sqaTestReflectorFreeArpIp | 1.3.6.1.4.1.3902.3.6000.132.20.1.21 | IpAddress | read-only | sqa reflector free arp local ip address |
| U32 sqaTestReflectorFreeArpVlanId | 1.3.6.1.4.1.3902.3.6000.132.20.1.22 | Unsigned32 | read-only | sqa reflector free arp vlan id |
| U32 sqaTestReflectorId | 1.3.6.1.4.1.3902.3.6000.132.20.1.1 | Unsigned32 | not-accessible | sqa reflector ID |
| STR sqaTestReflectorInterface | 1.3.6.1.4.1.3902.3.6000.132.20.1.3 | DisplayString | read-only | sqa reflector inbound interface |
| U32 sqaTestReflectorInternalVlanId | 1.3.6.1.4.1.3902.3.6000.132.20.1.15 | Unsigned32 | read-only | sqa reflector internal vlan id |
| TES sqaTestReflectorOnOfflineFlag | 1.3.6.1.4.1.3902.3.6000.132.20.1.19 | TestOnlineState | read-only | sqa reflector online flag, 1: online, 2: offline |
| U32 sqaTestReflectorPriority8021p | 1.3.6.1.4.1.3902.3.6000.132.20.1.17 | Unsigned32 | read-only | sqa reflector priority8021p, 255: undefined(invalid) |
| REF sqaTestReflectorRefMode | 1.3.6.1.4.1.3902.3.6000.132.20.1.2 | ReflectorMode | read-only | sqa reflector mode, 1: l2, 2: l3 |
| IP sqaTestReflectorSourceIp | 1.3.6.1.4.1.3902.3.6000.132.20.1.10 | IpAddress | read-only | sqa reflector source ip |
| MAC sqaTestReflectorSourceMac | 1.3.6.1.4.1.3902.3.6000.132.20.1.8 | MacAddress | read-only | sqa reflector source mac |
| U32 sqaTestReflectorSourcePort | 1.3.6.1.4.1.3902.3.6000.132.20.1.12 | Unsigned32 | read-only | sqa reflector source port, default: 49184 |
| sqaTestReflectorTable | 1.3.6.1.4.1.3902.3.6000.132.20 | not-accessible | sqa generalflow reflector table | |
| TES sqaTestReflectorTestMode | 1.3.6.1.4.1.3902.3.6000.132.20.1.4 | TestTestMode | read-only | sqa reflector test mode, 1: share-mode(default), 2: exclusive-mode |
| U32 sqaTestReflectorVlanId | 1.3.6.1.4.1.3902.3.6000.132.20.1.14 | Unsigned32 | read-only | sqa reflector vlan id |
| U32 sqaTestRepeat | 1.3.6.1.4.1.3902.3.6000.132.1.1.7 | Unsigned32 | read-only | sqa test repeat |
| TES sqaTestSenderClientMode | 1.3.6.1.4.1.3902.3.6000.132.19.1.2 | TestClientMode | read-only | sqa sender client mode, 1: l2-uni, 2: l3-uni, 3: l2-bridge-uni, 255: undefined(invalid) |
| U32 sqaTestSenderDelayDuration | 1.3.6.1.4.1.3902.3.6000.132.19.1.36 | Unsigned32 | read-only | sqa sender delay duration, default: 60s, unit : s |
| TES sqaTestSenderDelayEnable | 1.3.6.1.4.1.3902.3.6000.132.19.1.32 | TestEnableStatus | read-only | sqa sender delay enable |
| U32 sqaTestSenderDelayInterval | 1.3.6.1.4.1.3902.3.6000.132.19.1.35 | Unsigned32 | read-only | sqa sender delay interval, default: 4s, unit : s |
| U32 sqaTestSenderDelayRate | 1.3.6.1.4.1.3902.3.6000.132.19.1.34 | Unsigned32 | read-only | sqa sender delay rate, default: 1000kbps, unit : kbps |
| TES sqaTestSenderDelayRateType | 1.3.6.1.4.1.3902.3.6000.132.19.1.33 | TestRateType | read-only | sqa sender delay rate type, 1: ir(default), 2: ulr |
| U32 sqaTestSenderDelayThreshold | 1.3.6.1.4.1.3902.3.6000.132.19.1.37 | Unsigned32 | read-only | sqa sender delay threshold, default: 20000ns, unit : us |
| IP sqaTestSenderDestinationIp | 1.3.6.1.4.1.3902.3.6000.132.19.1.11 | IpAddress | read-only | sqa sender destination ip |
| MAC sqaTestSenderDestinationMac | 1.3.6.1.4.1.3902.3.6000.132.19.1.9 | MacAddress | read-only | sqa sender destination mac |
| U32 sqaTestSenderDisNonTest8021p | 1.3.6.1.4.1.3902.3.6000.132.19.1.5 | Unsigned32 | read-only | sqa sender disNonTest8021p, 255: undefined(invalid) |
| U32 sqaTestSenderDisNonTestDscp | 1.3.6.1.4.1.3902.3.6000.132.19.1.6 | Unsigned32 | read-only | sqa sender disNonTestDscp, 255: undefined(invalid) |
| U32 sqaTestSenderDscp | 1.3.6.1.4.1.3902.3.6000.132.19.1.16 | Unsigned32 | read-only | sqa sender dscp, default: 0 |
| sqaTestSenderEntry | 1.3.6.1.4.1.3902.3.6000.132.19.1 | not-accessible | sqa generalflow sender entry | |
| U32 sqaTestSenderExVlanId | 1.3.6.1.4.1.3902.3.6000.132.19.1.14 | Unsigned32 | read-only | sqa sender external vlan id |
| TES sqaTestSenderFreeArpEnable | 1.3.6.1.4.1.3902.3.6000.132.19.1.47 | TestEnableStatus | read-only | sqa sender free arp enable |
| U32 sqaTestSenderFreeArpInterval | 1.3.6.1.4.1.3902.3.6000.132.19.1.48 | Unsigned32 | read-only | sqa sender free arp interval, default: 30s, unit : s |
| STR sqaTestSenderInboundInterface | 1.3.6.1.4.1.3902.3.6000.132.19.1.3 | DisplayString | read-only | sqa sender inbound interface |
| U32 sqaTestSenderInVlanId | 1.3.6.1.4.1.3902.3.6000.132.19.1.13 | Unsigned32 | read-only | sqa sender internal vlan id |
| U32 sqaTestSenderJitterThreshold | 1.3.6.1.4.1.3902.3.6000.132.19.1.38 | Unsigned32 | read-only | sqa sender jitter threshold, default: 25000ns, unit : us |
| U32 sqaTestSenderLossDuration | 1.3.6.1.4.1.3902.3.6000.132.19.1.30 | Unsigned32 | read-only | sqa sender loss duration, default: 60s, unit : s |
| TES sqaTestSenderLossEnable | 1.3.6.1.4.1.3902.3.6000.132.19.1.26 | TestEnableStatus | read-only | sqa sender loss enable |
| U32 sqaTestSenderLossRate | 1.3.6.1.4.1.3902.3.6000.132.19.1.28 | Unsigned32 | read-only | sqa sender loss rate, default: 1000kbps, unit : kbps |
| TES sqaTestSenderLossRateType | 1.3.6.1.4.1.3902.3.6000.132.19.1.27 | TestRateType | read-only | sqa sender loss rate type, 1: ir(default), 2: ulr |
| U32 sqaTestSenderLossRatioThreshold | 1.3.6.1.4.1.3902.3.6000.132.19.1.31 | Unsigned32 | read-only | sqa sender loss ratio threshold, default: 0, unit : 1/10000 |
| U32 sqaTestSenderLossTimeOut | 1.3.6.1.4.1.3902.3.6000.132.19.1.29 | Unsigned32 | read-only | sqa sender loss timeout, default: 4s, unit : s |
| TES sqaTestSenderOnlineOfflineFlag | 1.3.6.1.4.1.3902.3.6000.132.19.1.46 | TestOnlineState | read-only | sqa sender online offline flag, 1: online, 2: offline |
| U32 sqaTestSenderPacketSize1 | 1.3.6.1.4.1.3902.3.6000.132.19.1.39 | Unsigned32 | read-only | sqa sender packet size1, unit : byte |
| U32 sqaTestSenderPacketSize2 | 1.3.6.1.4.1.3902.3.6000.132.19.1.40 | Unsigned32 | read-only | sqa sender packet size2, unit : byte |
| U32 sqaTestSenderPacketSize3 | 1.3.6.1.4.1.3902.3.6000.132.19.1.41 | Unsigned32 | read-only | sqa sender packet size3, unit : byte |
| U32 sqaTestSenderPacketSize4 | 1.3.6.1.4.1.3902.3.6000.132.19.1.42 | Unsigned32 | read-only | sqa sender packet size4, unit : byte |
| U32 sqaTestSenderPacketSize5 | 1.3.6.1.4.1.3902.3.6000.132.19.1.43 | Unsigned32 | read-only | sqa sender packet size5, unit : byte |
| U32 sqaTestSenderPacketSize6 | 1.3.6.1.4.1.3902.3.6000.132.19.1.44 | Unsigned32 | read-only | sqa sender packet size6, unit : byte |
| U32 sqaTestSenderPacketSize7 | 1.3.6.1.4.1.3902.3.6000.132.19.1.45 | Unsigned32 | read-only | sqa sender packet size7, unit : byte |
| U32 sqaTestSenderPriority8021p | 1.3.6.1.4.1.3902.3.6000.132.19.1.15 | Unsigned32 | read-only | sqa sender priority8021p, default: 0 |
| TES sqaTestSenderReflectorMode | 1.3.6.1.4.1.3902.3.6000.132.19.1.7 | TestReflectorMode | read-only | sqa sender reflector mode, 1:l1, 2:l2, 3:l3, 4:l4, 5:default |
| IP sqaTestSenderSourceIp | 1.3.6.1.4.1.3902.3.6000.132.19.1.10 | IpAddress | read-only | sqa sender source ip |
| MAC sqaTestSenderSourceMac | 1.3.6.1.4.1.3902.3.6000.132.19.1.8 | MacAddress | read-only | sqa sender source mac |
| sqaTestSenderTable | 1.3.6.1.4.1.3902.3.6000.132.19 | not-accessible | sqa generalflow sender table | |
| TES sqaTestSenderTestMode | 1.3.6.1.4.1.3902.3.6000.132.19.1.4 | TestTestMode | read-only | sqa sender test mode, 1: share-mode(default), 2: exclusive-mode |
| U32 sqaTestSenderTestNum | 1.3.6.1.4.1.3902.3.6000.132.19.1.1 | Unsigned32 | not-accessible | sqa sender test num. The range of this parameter depend on the device. |
| STR sqaTestSenderTimeRange | 1.3.6.1.4.1.3902.3.6000.132.19.1.49 | DisplayString | read-only | sqa sender timerange |
| U32 sqaTestSenderTpDuration | 1.3.6.1.4.1.3902.3.6000.132.19.1.23 | Unsigned32 | read-only | sqa sender throughput duration, 0: undefined(invalid), unit : s |
| TES sqaTestSenderTpEnable | 1.3.6.1.4.1.3902.3.6000.132.19.1.17 | TestEnableStatus | read-only | sqa sender throughput enable |
| U32 sqaTestSenderTpHighRate | 1.3.6.1.4.1.3902.3.6000.132.19.1.19 | Unsigned32 | read-only | sqa sender throughput high rate, unit : kbps |
| U32 sqaTestSenderTpLossThreshold | 1.3.6.1.4.1.3902.3.6000.132.19.1.25 | Unsigned32 | read-only | sqa sender throughput loss threshold, default: 0, unit : 1/10000 |
| U32 sqaTestSenderTpLowRate | 1.3.6.1.4.1.3902.3.6000.132.19.1.20 | Unsigned32 | read-only | sqa sender throughput low rate, unit : kbps |
| U32 sqaTestSenderTpOneRateDuration | 1.3.6.1.4.1.3902.3.6000.132.19.1.22 | Unsigned32 | read-only | sqa sender throughput one rate duration, default: 4s, unit : s |
| U32 sqaTestSenderTpPrecision | 1.3.6.1.4.1.3902.3.6000.132.19.1.24 | Unsigned32 | read-only | sqa sender throughput precision, default: 1000kbps, unit : kbps |
| TES sqaTestSenderTpRateType | 1.3.6.1.4.1.3902.3.6000.132.19.1.18 | TestRateType | read-only | sqa sender throughput rate type, 1: ir(default), 2: ulr |
| U32 sqaTestSenderTpTimeOut | 1.3.6.1.4.1.3902.3.6000.132.19.1.21 | Unsigned32 | read-only | sqa sender throughput timeout, default: 4s, unit : s |
| U32 sqaTestSenderVlanId | 1.3.6.1.4.1.3902.3.6000.132.19.1.12 | Unsigned32 | read-only | sqa sender vlan id |
| U32 sqaTestSize | 1.3.6.1.4.1.3902.3.6000.132.1.1.8 | Unsigned32 | read-only | sqa test size |
| STR sqaTestSnmpCommunity | 1.3.6.1.4.1.3902.3.6000.132.1.1.25 | DisplayString | read-only | sqa test encrypted community, the length of this community is 64 |
| sqaTestSnmpResultEntry | 1.3.6.1.4.1.3902.3.6000.132.16.1 | not-accessible | sqa snmp result entry | |
| STR sqaTestSnmpResultProbeTime | 1.3.6.1.4.1.3902.3.6000.132.16.1.4 | DisplayString | read-only | sqa snmp result probe time |
| U32 sqaTestSnmpResultRTT | 1.3.6.1.4.1.3902.3.6000.132.16.1.3 | Unsigned32 | read-only | sqa snmp result last rtt |
| TES sqaTestSnmpResultStatus | 1.3.6.1.4.1.3902.3.6000.132.16.1.2 | TestResultStatus | read-only | sqa snmp result test status |
| sqaTestSnmpResultTable | 1.3.6.1.4.1.3902.3.6000.132.16 | not-accessible | sqa snmp result table | |
| INT sqaTestSnmpResultTestNum | 1.3.6.1.4.1.3902.3.6000.132.16.1.1 | INTEGER | read-only | sqa snmp result test num |
| IP sqaTestSourceIP | 1.3.6.1.4.1.3902.3.6000.132.1.1.6 | IpAddress | read-only | sqa test source ip |
| TES sqaTestStatus | 1.3.6.1.4.1.3902.3.6000.132.1.1.21 | TestStatus | read-only | sqa test status |
| sqaTestTable | 1.3.6.1.4.1.3902.3.6000.132.1 | not-accessible | sqa test entity configuration | |
| U32 sqaTestTcpResultAvgRTT | 1.3.6.1.4.1.3902.3.6000.132.12.1.8 | Unsigned32 | read-only | sqa tcp result avg rtt |
| IP sqaTestTcpResultDesIP | 1.3.6.1.4.1.3902.3.6000.132.12.1.5 | IpAddress | read-only | sqa tcp result des ip |
| sqaTestTcpResultEntry | 1.3.6.1.4.1.3902.3.6000.132.12.1 | not-accessible | sqa tcp result entry | |
| U32 sqaTestTcpResultMaxRTT | 1.3.6.1.4.1.3902.3.6000.132.12.1.7 | Unsigned32 | read-only | sqa tcp result max rtt |
| U32 sqaTestTcpResultMinRTT | 1.3.6.1.4.1.3902.3.6000.132.12.1.6 | Unsigned32 | read-only | sqa tcp result min rtt |
| STR sqaTestTcpResultProbeTime | 1.3.6.1.4.1.3902.3.6000.132.12.1.10 | DisplayString | read-only | sqa tcp result probe time |
| U32 sqaTestTcpResultRepeat | 1.3.6.1.4.1.3902.3.6000.132.12.1.2 | Unsigned32 | read-only | sqa tcp result repeat |
| U32 sqaTestTcpResultResponse | 1.3.6.1.4.1.3902.3.6000.132.12.1.3 | Unsigned32 | read-only | sqa tcp result response |
| TES sqaTestTcpResultStatus | 1.3.6.1.4.1.3902.3.6000.132.12.1.4 | TestResultStatus | read-only | sqa tcp result status |
| U32 sqaTestTcpResultSumRTT | 1.3.6.1.4.1.3902.3.6000.132.12.1.9 | Unsigned32 | read-only | sqa tcp result sum rtt |
| sqaTestTcpResultTable | 1.3.6.1.4.1.3902.3.6000.132.12 | not-accessible | sqa tcp result table | |
| INT sqaTestTcpResultTestNum | 1.3.6.1.4.1.3902.3.6000.132.12.1.1 | INTEGER | read-only | sqa tcp result test num |
| U32 sqaTestTimeout | 1.3.6.1.4.1.3902.3.6000.132.1.1.11 | Unsigned32 | read-only | sqa test timeout |
| STR sqaTestTimeRange | 1.3.6.1.4.1.3902.3.6000.132.1.1.22 | DisplayString | read-only | sqa test time range |
| U32 sqaTestTos | 1.3.6.1.4.1.3902.3.6000.132.1.1.9 | Unsigned32 | read-only | sqa test tos,256 is the invalid value |
| U32 sqaTestTpResultDscp | 1.3.6.1.4.1.3902.3.6000.132.21.1.5 | Unsigned32 | read-only | sqa generalflow throughput test result test dscp |
| sqaTestTpResultEntry | 1.3.6.1.4.1.3902.3.6000.132.21.1 | not-accessible | sqa generalflow throughput test result entry | |
| U32 sqaTestTpResultInfoRate | 1.3.6.1.4.1.3902.3.6000.132.21.1.8 | Unsigned32 | read-only | sqa generalflow throughput test result info rate, unit : kbps |
| U32 sqaTestTpResultLossRatio | 1.3.6.1.4.1.3902.3.6000.132.21.1.9 | Unsigned32 | read-only | sqa generalflow throughput test result loss ratio, unit : 1/10000 |
| U32 sqaTestTpResultPacketSize | 1.3.6.1.4.1.3902.3.6000.132.21.1.2 | Unsigned32 | not-accessible | sqa generalflow throughput test packet size, unit : byte |
| U32 sqaTestTpResultPrecision | 1.3.6.1.4.1.3902.3.6000.132.21.1.6 | Unsigned32 | read-only | sqa generalflow throughput test result precision, unit : kbps |
| U32 sqaTestTpResultPriority8021p | 1.3.6.1.4.1.3902.3.6000.132.21.1.4 | Unsigned32 | read-only | sqa generalflow throughput test result test priority 8021p |
| TPR sqaTestTpResultStatus | 1.3.6.1.4.1.3902.3.6000.132.21.1.11 | TpResultStatus | read-only | sqa generalflow throughput test status |
| sqaTestTpResultTable | 1.3.6.1.4.1.3902.3.6000.132.21 | not-accessible | sqa generalflow throughput test result table | |
| U32 sqaTestTpResultTestDuration | 1.3.6.1.4.1.3902.3.6000.132.21.1.10 | Unsigned32 | read-only | sqa generalflow throughput test duration, unit : s |
| U32 sqaTestTpResultTestNum | 1.3.6.1.4.1.3902.3.6000.132.21.1.1 | Unsigned32 | not-accessible | sqa generalflow throughput test number |
| U32 sqaTestTpResultTp | 1.3.6.1.4.1.3902.3.6000.132.21.1.7 | Unsigned32 | read-only | sqa generalflow throughput test Throughput, unit : kbps |
| STR sqaTestTpResultUniInterface | 1.3.6.1.4.1.3902.3.6000.132.21.1.3 | DisplayString | read-only | sqa generalflow throughput test UNI interface |
| TES sqaTestTrapenable | 1.3.6.1.4.1.3902.3.6000.132.1.1.18 | TestTrapOnOff | read-only | sqa test trap enable |
| U32 sqaTestTrapPercent | 1.3.6.1.4.1.3902.3.6000.132.1.1.19 | Unsigned32 | read-only | sqa test trap percent |
| U32 sqaTestTtl | 1.3.6.1.4.1.3902.3.6000.132.1.1.10 | Unsigned32 | read-only | sqa test ttl |
| TES sqaTestType | 1.3.6.1.4.1.3902.3.6000.132.1.1.2 | TestType | read-only | sqa test type |
| U32 sqaTestUdpJitterResultAvgNegDS | 1.3.6.1.4.1.3902.3.6000.132.15.1.31 | Unsigned32 | read-only | sqa udp jitter result avg neg ds |
| U32 sqaTestUdpJitterResultAvgNegSD | 1.3.6.1.4.1.3902.3.6000.132.15.1.21 | Unsigned32 | read-only | sqa udp jitter result avg neg sd |
| U32 sqaTestUdpJitterResultAvgPosDS | 1.3.6.1.4.1.3902.3.6000.132.15.1.26 | Unsigned32 | read-only | sqa udp jitter result avg pos ds |
| U32 sqaTestUdpJitterResultAvgPosSD | 1.3.6.1.4.1.3902.3.6000.132.15.1.16 | Unsigned32 | read-only | sqa udp jitter result avg pos sd |
| I32 sqaTestUdpJitterResultAvgRTTDS | 1.3.6.1.4.1.3902.3.6000.132.15.1.12 | Integer32 | read-only | sqa udp jitter result avg rtt ds |
| I32 sqaTestUdpJitterResultAvgRTTSD | 1.3.6.1.4.1.3902.3.6000.132.15.1.8 | Integer32 | read-only | sqa udp jitter result avg rtt sd |
| IP sqaTestUdpJitterResultDesIP | 1.3.6.1.4.1.3902.3.6000.132.15.1.5 | IpAddress | read-only | sqa udp jitter result des ip |
| U32 sqaTestUdpJitterResultDisposeNumDS | 1.3.6.1.4.1.3902.3.6000.132.15.1.35 | Unsigned32 | read-only | sqa udp jitter result dispose num ds |
| U32 sqaTestUdpJitterResultDisposeNumSD | 1.3.6.1.4.1.3902.3.6000.132.15.1.34 | Unsigned32 | read-only | sqa udp jitter result dispose num sd |
| sqaTestUdpJitterResultEntry | 1.3.6.1.4.1.3902.3.6000.132.15.1 | not-accessible | sqa udp jitter result entry | |
| U32 sqaTestUdpJitterResultMaxNegDS | 1.3.6.1.4.1.3902.3.6000.132.15.1.30 | Unsigned32 | read-only | sqa udp jitter result max neg ds |
| U32 sqaTestUdpJitterResultMaxNegSD | 1.3.6.1.4.1.3902.3.6000.132.15.1.20 | Unsigned32 | read-only | sqa udp jitter result max neg sd |
| U32 sqaTestUdpJitterResultMaxPosDS | 1.3.6.1.4.1.3902.3.6000.132.15.1.25 | Unsigned32 | read-only | sqa udp jitter result max pos ds |
| U32 sqaTestUdpJitterResultMaxPosSD | 1.3.6.1.4.1.3902.3.6000.132.15.1.15 | Unsigned32 | read-only | sqa udp jitter result max pos sd |
| I32 sqaTestUdpJitterResultMaxRTTDS | 1.3.6.1.4.1.3902.3.6000.132.15.1.11 | Integer32 | read-only | sqa udp jitter result max rtt ds |
| I32 sqaTestUdpJitterResultMaxRTTSD | 1.3.6.1.4.1.3902.3.6000.132.15.1.7 | Integer32 | read-only | sqa udp jitter result max rtt sd |
| U32 sqaTestUdpJitterResultMinNegDS | 1.3.6.1.4.1.3902.3.6000.132.15.1.29 | Unsigned32 | read-only | sqa udp jitter result min neg ds |
| U32 sqaTestUdpJitterResultMinNegSD | 1.3.6.1.4.1.3902.3.6000.132.15.1.19 | Unsigned32 | read-only | sqa udp jitter result min neg sd |
| U32 sqaTestUdpJitterResultMinPosDS | 1.3.6.1.4.1.3902.3.6000.132.15.1.24 | Unsigned32 | read-only | sqa udp jitter result min pos ds |
| U32 sqaTestUdpJitterResultMinPosSD | 1.3.6.1.4.1.3902.3.6000.132.15.1.14 | Unsigned32 | read-only | sqa udp jitter result min pos sd |
| I32 sqaTestUdpJitterResultMinRTTDS | 1.3.6.1.4.1.3902.3.6000.132.15.1.10 | Integer32 | read-only | sqa udp jitter result min rtt ds |
| I32 sqaTestUdpJitterResultMinRTTSD | 1.3.6.1.4.1.3902.3.6000.132.15.1.6 | Integer32 | read-only | sqa udp jitter result min rtt sd |
| U32 sqaTestUdpJitterResultNumNegDS | 1.3.6.1.4.1.3902.3.6000.132.15.1.33 | Unsigned32 | read-only | sqa udp jitter result num neg ds |
| U32 sqaTestUdpJitterResultNumNegSD | 1.3.6.1.4.1.3902.3.6000.132.15.1.23 | Unsigned32 | read-only | sqa udp jitter result num neg sd |
| U32 sqaTestUdpJitterResultNumPosDS | 1.3.6.1.4.1.3902.3.6000.132.15.1.28 | Unsigned32 | read-only | sqa udp jitter result num pos ds |
| U32 sqaTestUdpJitterResultNumPosSD | 1.3.6.1.4.1.3902.3.6000.132.15.1.18 | Unsigned32 | read-only | sqa udp jitter result num pos sd |
| STR sqaTestUdpJitterResultProbeTime | 1.3.6.1.4.1.3902.3.6000.132.15.1.36 | DisplayString | read-only | sqa udp jitterresult probe time |
| U32 sqaTestUdpJitterResultRepeat | 1.3.6.1.4.1.3902.3.6000.132.15.1.2 | Unsigned32 | read-only | sqa udp jitter result repeat |
| U32 sqaTestUdpJitterResultResponse | 1.3.6.1.4.1.3902.3.6000.132.15.1.3 | Unsigned32 | read-only | sqa udp jitter result response |
| TES sqaTestUdpJitterResultStatus | 1.3.6.1.4.1.3902.3.6000.132.15.1.4 | TestResultStatus | read-only | sqa udp jitter result status |
| U32 sqaTestUdpJitterResultSumNegDS | 1.3.6.1.4.1.3902.3.6000.132.15.1.32 | Unsigned32 | read-only | sqa udp jitter result sum neg ds |
| U32 sqaTestUdpJitterResultSumNegSD | 1.3.6.1.4.1.3902.3.6000.132.15.1.22 | Unsigned32 | read-only | sqa udp jitter result sum neg sd |
| U32 sqaTestUdpJitterResultSumPosDS | 1.3.6.1.4.1.3902.3.6000.132.15.1.27 | Unsigned32 | read-only | sqa udp jitter result sum pos ds |
| U32 sqaTestUdpJitterResultSumPosSD | 1.3.6.1.4.1.3902.3.6000.132.15.1.17 | Unsigned32 | read-only | sqa udp jitter result sum pos sd |
| I32 sqaTestUdpJitterResultSumRTTDS | 1.3.6.1.4.1.3902.3.6000.132.15.1.13 | Integer32 | read-only | sqa udp jitter result sum rtt ds |
| I32 sqaTestUdpJitterResultSumRTTSD | 1.3.6.1.4.1.3902.3.6000.132.15.1.9 | Integer32 | read-only | sqa udp jitter result sum rtt sd |
| sqaTestUdpJitterResultTable | 1.3.6.1.4.1.3902.3.6000.132.15 | not-accessible | sqa udp jitter result table | |
| INT sqaTestUdpJitterResultTestNum | 1.3.6.1.4.1.3902.3.6000.132.15.1.1 | INTEGER | read-only | sqa udp jitter result test num |
| U32 sqaTestUdpResultAvgJitter | 1.3.6.1.4.1.3902.3.6000.132.11.1.22 | Unsigned32 | read-only | sqa udp result avg jitter |
| U32 sqaTestUdpResultAvgNegJitter | 1.3.6.1.4.1.3902.3.6000.132.11.1.16 | Unsigned32 | read-only | sqa udp result avg neg jitter |
| U32 sqaTestUdpResultAvgPosJitter | 1.3.6.1.4.1.3902.3.6000.132.11.1.12 | Unsigned32 | read-only | sqa udp result avg pos jitter |
| U32 sqaTestUdpResultAvgRTT | 1.3.6.1.4.1.3902.3.6000.132.11.1.8 | Unsigned32 | read-only | sqa udp result avg rtt |
| IP sqaTestUdpResultDesIP | 1.3.6.1.4.1.3902.3.6000.132.11.1.5 | IpAddress | read-only | sqa udp result des ip |
| sqaTestUdpResultEntry | 1.3.6.1.4.1.3902.3.6000.132.11.1 | not-accessible | sqa udp result entry | |
| U32 sqaTestUdpResultMaxJitter | 1.3.6.1.4.1.3902.3.6000.132.11.1.21 | Unsigned32 | read-only | sqa udp result max jitter |
| U32 sqaTestUdpResultMaxNegJitter | 1.3.6.1.4.1.3902.3.6000.132.11.1.15 | Unsigned32 | read-only | sqa udp result max neg jitter |
| U32 sqaTestUdpResultMaxPosJitter | 1.3.6.1.4.1.3902.3.6000.132.11.1.11 | Unsigned32 | read-only | sqa udp result max pos jitter |
| U32 sqaTestUdpResultMaxRTT | 1.3.6.1.4.1.3902.3.6000.132.11.1.7 | Unsigned32 | read-only | sqa udp result max rtt |
| U32 sqaTestUdpResultMinJitter | 1.3.6.1.4.1.3902.3.6000.132.11.1.20 | Unsigned32 | read-only | sqa udp result min jitter |
| U32 sqaTestUdpResultMinNegJitter | 1.3.6.1.4.1.3902.3.6000.132.11.1.14 | Unsigned32 | read-only | sqa udp result min neg jitter |
| U32 sqaTestUdpResultMinPosJitter | 1.3.6.1.4.1.3902.3.6000.132.11.1.10 | Unsigned32 | read-only | sqa udp result min pos jitter |
| U32 sqaTestUdpResultMinRTT | 1.3.6.1.4.1.3902.3.6000.132.11.1.6 | Unsigned32 | read-only | sqa udp result min rtt |
| STR sqaTestUdpResultPacketLossRate | 1.3.6.1.4.1.3902.3.6000.132.11.1.19 | DisplayString | read-only | sqa udp result packet loss rate |
| STR sqaTestUdpResultProbeTime | 1.3.6.1.4.1.3902.3.6000.132.11.1.18 | DisplayString | read-only | sqa udp result probe time |
| U32 sqaTestUdpResultRepeat | 1.3.6.1.4.1.3902.3.6000.132.11.1.2 | Unsigned32 | read-only | sqa udp result repeat |
| U32 sqaTestUdpResultResponse | 1.3.6.1.4.1.3902.3.6000.132.11.1.3 | Unsigned32 | read-only | sqa udp result response |
| TES sqaTestUdpResultStatus | 1.3.6.1.4.1.3902.3.6000.132.11.1.4 | TestResultStatus | read-only | sqa udp result status |
| U32 sqaTestUdpResultSumJitter | 1.3.6.1.4.1.3902.3.6000.132.11.1.23 | Unsigned32 | read-only | sqa udp result sum jitter |
| U32 sqaTestUdpResultSumNegJitter | 1.3.6.1.4.1.3902.3.6000.132.11.1.17 | Unsigned32 | read-only | sqa udp result sum neg jitter |
| U32 sqaTestUdpResultSumPosJitter | 1.3.6.1.4.1.3902.3.6000.132.11.1.13 | Unsigned32 | read-only | sqa udp result sum pos jitter |
| U32 sqaTestUdpResultSumRTT | 1.3.6.1.4.1.3902.3.6000.132.11.1.9 | Unsigned32 | read-only | sqa udp result sum rtt |
| sqaTestUdpResultTable | 1.3.6.1.4.1.3902.3.6000.132.11 | not-accessible | sqa udp result table | |
| INT sqaTestUdpResultTestNum | 1.3.6.1.4.1.3902.3.6000.132.11.1.1 | INTEGER | read-only | sqa udp result test num |
| STR sqaTestVrf | 1.3.6.1.4.1.3902.3.6000.132.1.1.3 | DisplayString | read-only | sqa test vrf |
| IP sqaUdpJitterTestDesIP | 1.3.6.1.4.1.3902.3.6000.132.27.1.3 | IpAddress | read-create | The destination IP address. |
| U32 sqaUdpJitterTestDesPort | 1.3.6.1.4.1.3902.3.6000.132.27.1.4 | Unsigned32 | read-create | The destination port number,ranges from 1025 to 65535. |
| sqaUdpJitterTestEntry | 1.3.6.1.4.1.3902.3.6000.132.27.1 | not-accessible | SQA UDP jitter test entity configuration table | |
| U32 sqaUdpJitterTestInterval | 1.3.6.1.4.1.3902.3.6000.132.27.1.8 | Unsigned32 | read-create | The sending period of UDP packets,ranges from 50 to 2000(default:100),unit:ms. |
| U32 sqaUdpJitterTestNum | 1.3.6.1.4.1.3902.3.6000.132.27.1.1 | Unsigned32 | not-accessible | SQA test number.The range of this parameter depend on the device. |
| U32 sqaUdpJitterTestRepeat | 1.3.6.1.4.1.3902.3.6000.132.27.1.5 | Unsigned32 | read-create | The number of repeat times,ranges from 1 to 1000(default:1). |
| ROW sqaUdpJitterTestRowStatus | 1.3.6.1.4.1.3902.3.6000.132.27.1.9 | RowStatus | read-create | Row status |
| U32 sqaUdpJitterTestSize | 1.3.6.1.4.1.3902.3.6000.132.27.1.6 | Unsigned32 | read-create | The size of UDP packet,ranges from 50 to 1500(default:50),unit:byte. |
| sqaUdpJitterTestTable | 1.3.6.1.4.1.3902.3.6000.132.27 | not-accessible | SQA UDP test entity configuration | |
| U32 sqaUdpJitterTestTos | 1.3.6.1.4.1.3902.3.6000.132.27.1.7 | Unsigned32 | read-create | The TOS value,ranges from 0 to 255(default:0). |
| STR sqaUdpJitterTestVrf | 1.3.6.1.4.1.3902.3.6000.132.27.1.2 | DisplayString | read-create | The name of VRF,this string length ranges from 1 to 32. |
| sqaUdpServerGrp | 1.3.6.1.4.1.3902.3.6000.132.3 | |||
| IP sqaUdpServerIP | 1.3.6.1.4.1.3902.3.6000.132.3.2 | IpAddress | read-create | sqa udp server ip |
| U32 sqaUdpServerPort | 1.3.6.1.4.1.3902.3.6000.132.3.3 | Unsigned32 | read-create | sqa udp server port |
| STR sqaUdpServerVrf | 1.3.6.1.4.1.3902.3.6000.132.3.1 | DisplayString | read-only | sqa udp server vrf |
| IP sqaUdpTestDesIP | 1.3.6.1.4.1.3902.3.6000.132.26.1.3 | IpAddress | read-create | The destination IP address. |
| U32 sqaUdpTestDesPort | 1.3.6.1.4.1.3902.3.6000.132.26.1.4 | Unsigned32 | read-create | The destination port number,ranges from 1025 to 65535. |
| sqaUdpTestEntry | 1.3.6.1.4.1.3902.3.6000.132.26.1 | not-accessible | SQA UDP test entity configuration table | |
| U32 sqaUdpTestInterval | 1.3.6.1.4.1.3902.3.6000.132.26.1.8 | Unsigned32 | read-create | The sending period of UDP packets,ranges from 50 to 2000(default:100),unit:ms. |
| U32 sqaUdpTestNum | 1.3.6.1.4.1.3902.3.6000.132.26.1.1 | Unsigned32 | not-accessible | SQA test number.The range of this parameter depend on the device. |
| U32 sqaUdpTestRepeat | 1.3.6.1.4.1.3902.3.6000.132.26.1.5 | Unsigned32 | read-create | The number of repeat times,ranges from 1 to 1000(default:1). |
| ROW sqaUdpTestRowStatus | 1.3.6.1.4.1.3902.3.6000.132.26.1.9 | RowStatus | read-create | Row status |
| U32 sqaUdpTestSize | 1.3.6.1.4.1.3902.3.6000.132.26.1.6 | Unsigned32 | read-create | The size of UDP packet,ranges from 50 to 1500(default:50),unit:byte. |
| sqaUdpTestTable | 1.3.6.1.4.1.3902.3.6000.132.26 | not-accessible | SQA UDP test entity configuration | |
| U32 sqaUdpTestTos | 1.3.6.1.4.1.3902.3.6000.132.26.1.7 | Unsigned32 | read-create | The TOS value,ranges from 0 to 255(default:0). |
| STR sqaUdpTestVrf | 1.3.6.1.4.1.3902.3.6000.132.26.1.2 | DisplayString | read-create | The name of VRF,this string length ranges from 1 to 32. |
| zte | 1.3.6.1.4.1.3902 | |||
| zxr10 | 1.3.6.1.4.1.3902.3 | |||
| zxr10RosngMIB | 1.3.6.1.4.1.3902.3.6000 | |||
| zxr10SqaNotifications | 1.3.6.1.4.1.3902.3.6000.132.24 | |||
| NTF zxr10SqaTestGeneralFlowFail | 1.3.6.1.4.1.3902.3.6000.132.24.2 | |||
| NTF zxr10SqaTestGeneralFlowFinish | 1.3.6.1.4.1.3902.3.6000.132.24.1 |
RFC description
Service quality assessment MIB for ZTE routers supporting TCP, UDP, ICMP jitter and loss testing.
Start monitoring ZTE ZXR10 router/switch (Service Quality Analyzer active-probe latency/jitter/loss status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.