ZTE-AN-VND-MIB

All MIBs › ZTE-AN-VND-MIB

Organization: ZTE Corporation

Last Updated: 2017-03-27

Category: ZTE Access Node (ZTE-AN) Management

Description: Manages ZTE access node VND (Virtual Network Domain) configuration for multi-tenant access services.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-AN-VND-MIB?

ZTE-AN-VND-MIB is a ZTE-proprietary module for the ZTE access network (AN) product line, covering the Virtual Network Device (VND) feature used to logically partition a physical access node into multiple virtual network domains for multi-tenant broadband access deployments. It exposes configuration-oriented data describing how VNDs are defined and associated with physical ports, line cards, or tenant groupings on the chassis. Because it centers on virtual device state rather than raw counters, its main monitoring value is confirming that each virtual network device is correctly provisioned and operationally active, effectively acting as a software-status check on the access node's logical partitioning. As a ZTE enterprise MIB it depends on ZTE's private enterprise SMI tree and general SNMP conventions rather than a specific IETF standard. It is typically deployed by carriers and ISPs managing ZTE DSLAM/OLT access nodes that serve multiple downstream customers or virtual operators from a single chassis. Network engineers evaluating or troubleshooting this functionality can download the ZTE-AN-VND-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-VND-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE access node (DSLAM/OLT)
ZTE broadband access equipment

Monitoring Examples

No sample objects were supplied for this MIB, so specifics are inferred from the module description: a plausible monitoring pattern is polling a VND status table (following the module's ztevnd* naming convention) to confirm each virtual network device's admin/operational state and its mapping to physical resources. An operator would check this after provisioning a new virtual domain to confirm it came up correctly, or investigate it if a specific tenant's service appears isolated from the rest of the access node. This scenario is a reasonable inference rather than a confirmed table structure.

What Can Be Monitored

virtual network device status
VND-to-resource mapping
VND provisioning state

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus

From ZTE-AN-IF-MIB

zxAnSubIfIndex

OBJECT-TYPE

From ZTE-AN-SMI

zxAnVnd

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxAnVndMib	1.3.6.1.4.1.3902.1082.530.530			This MIB defines managed objects of VND(virtual network device).
zxAnVndGlobalObjects	1.3.6.1.4.1.3902.1082.530.530.1
BIT zxAnVndCapabilities	1.3.6.1.4.1.3902.1082.530.530.1.100	Bits	read-only	The VND capabilities. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means not supporting qosCosToCos(9), qosDscpToDscp(10) and qosDscpToCos(11) in zxAnVndResType. bit 1: value 1 means supporting pppoe(15), dhcpv4(16) and dhcpv6(17) in zxAnVndResType.
zxAnVndObjects	1.3.6.1.4.1.3902.1082.530.530.2
zxAnVndResourceObjects	1.3.6.1.4.1.3902.1082.530.530.2.1
zxAnVndResProfileTable	1.3.6.1.4.1.3902.1082.530.530.2.1.2		not-accessible	VND resource profile table. This table is valid only in VND 0.
zxAnVndResProfileEntry	1.3.6.1.4.1.3902.1082.530.530.2.1.2.1		not-accessible	VND resource profile entry.
STR zxAnVndResProfileName	1.3.6.1.4.1.3902.1082.530.530.2.1.2.1.1	DisplayString	not-accessible	VND resource profile name.
INT zxAnVndResType	1.3.6.1.4.1.3902.1082.530.530.2.1.2.1.2	INTEGER	not-accessible	VND resource type.
I32 zxAnVndResUpperThresh	1.3.6.1.4.1.3902.1082.530.530.2.1.2.1.3	Integer32	read-create	VND resource number upper threshold. When zxAnVndResType is vlan(1), the maximum value of zxAnVndResUpperThresh is 4094. When zxAnVndResType is igmp(2) the maximum value of zxAnVndResUpperThresh is 4096 for C600 and C680, 8192 for C300v2. When zxAnVndResType is mld(3) the maximum value of zxAnVndResUpperThresh is 4096 for C600 and C680, 8192 for C300v2. When zxAnVndResType is mac(4) the maximum value of zxAnVndResUpperThresh is 524288 for C600 and C680, 163840 for C300v2. When zxAnVndResType is vport(5) the maximum value of zxAnVndResUpperThresh is 32768 for C600 and C300v2, 65536 for C680. When zxAnVndResType is onu(6) the maximum value of zxAnVndResUpperThresh is 32768 for C600, 65536 for C680 and 16384. for C300v2. When zxAnVndResType is vlanForwardingMode(7) the maximum value of zxAnVndResUpperThresh is 73728 for C600 and C680, 4096 for C300v2. When zxAnVndResType is servicePort(8) the maximum value of zxAnVndResUpperThresh is 262144 for C600, 524288 for C680 and 131072 for C300v2. When zxAnVndResType is qosCosToCos(9) the maximum value of zxAnVndResUpperThresh is 112. C300v2 does not support. When zxAnVndResType is qosDscpToDscp(10) the maximum value of zxAnVndResUpperThresh is 120. C300v2 does not support. When zxAnVndResType is qosDscpToCos(11) the maximum value of zxAnVndResUpperThresh is 120. C300v2 does not support. When zxAnVndResType is aclRule(12) the maximum value of zxAnVndResUpperThresh is 8192 for C600, 18432 for C680 and 38500 for C300v2. When zxAnVndResType is l2cp(13) the maximum value of zxAnVndResUpperThresh is 62 for C600 and C680, 32 for C300v2. When zxAnVndResType is trafficPir(14) the maximum value of zxAnVndResUpperThresh is 10000000. When zxAnVndResType is pppoe(15) the maximum value of zxAnVndResUpperThresh is 65536 for C600, 131072 for C680. C300v2 does not support. When zxAnVndResType is dhcpv4(16) the maximum value of zxAnVndResUpperThresh is 65536 for C600, 131072 for C680. C300v2 does not support. When zxAnVndResType is dhcpv6(17) the maximum value of zxAnVndResUpperThresh is 65536 for C600, 131072 for C680. C300v2 does not support. When zxAnVndResType is allDefault(255), it indicates that a resource profile is created and all resource types are initialized to default values.
ROW zxAnVndResProfileRowStatus	1.3.6.1.4.1.3902.1082.530.530.2.1.2.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnVndResProfileEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnVndResProfileConfTable	1.3.6.1.4.1.3902.1082.530.530.2.1.3		not-accessible	VND resource profile configuration table. This table is valid only in VND 0.
zxAnVndResProfileConfEntry	1.3.6.1.4.1.3902.1082.530.530.2.1.3.1		not-accessible	VND resource profile configuration entry.
STR zxAnVndName	1.3.6.1.4.1.3902.1082.530.530.2.1.3.1.1	DisplayString	not-accessible	VND name.
STR zxAnVndResConfPrfName	1.3.6.1.4.1.3902.1082.530.530.2.1.3.1.2	DisplayString	read-create	VND resource profile name.
zxAnVndResStatsTable	1.3.6.1.4.1.3902.1082.530.530.2.1.11		not-accessible	VND Resource Statistics Table. This table is valid only in VND 0.
zxAnVndResStatsEntry	1.3.6.1.4.1.3902.1082.530.530.2.1.11.1		not-accessible	VND Resource Statistics Entry.
I32 zxAnVndResStatsTotalNum	1.3.6.1.4.1.3902.1082.530.530.2.1.11.1.1	Integer32	read-only	Total resources. This object is valid only in VND 0.
I32 zxAnVndResStatsUsedNum	1.3.6.1.4.1.3902.1082.530.530.2.1.11.1.2	Integer32	read-only	Used resources.
I32 zxAnVndResStatsAvailableNum	1.3.6.1.4.1.3902.1082.530.530.2.1.11.1.3	Integer32	read-only	Available resources.
zxAnVndCurrResourceObjects	1.3.6.1.4.1.3902.1082.530.530.2.2
zxAnVndCurrResStatsTable	1.3.6.1.4.1.3902.1082.530.530.2.2.2		not-accessible	VND Current Resource Statistics Table. This table is valid in every VND and only can get current VND resource.
zxAnVndCurrResStatsEntry	1.3.6.1.4.1.3902.1082.530.530.2.2.2.1		not-accessible	VND Current Resource Statistics Entry.
I32 zxAnVndCurrResStatsUsedNum	1.3.6.1.4.1.3902.1082.530.530.2.2.2.1.1	Integer32	read-only	Used resources.
I32 zxAnVndCurrResStatsAvailableNum	1.3.6.1.4.1.3902.1082.530.530.2.2.2.1.2	Integer32	read-only	Available resources.
zxAnVndAssignedInfoObjects	1.3.6.1.4.1.3902.1082.530.530.2.3
zxAnVndIfAssignedInfoTable	1.3.6.1.4.1.3902.1082.530.530.2.3.2		not-accessible	VND interface assigned information table. This table is valid in every VND.
zxAnVndIfAssignedInfoEntry	1.3.6.1.4.1.3902.1082.530.530.2.3.2.1		not-accessible	VND interface assigned information entry.
INT zxAnVndIfAssignedMode	1.3.6.1.4.1.3902.1082.530.530.2.3.2.1.1	INTEGER	read-only	The interface assigned mode.
zxAnVndAssignableResObjects	1.3.6.1.4.1.3902.1082.530.530.2.4
zxAnVndAssignableCardTable	1.3.6.1.4.1.3902.1082.530.530.2.4.2		not-accessible	Assignable card information table. This table is valid only in VND 0.
zxAnVndAssignableCardEntry	1.3.6.1.4.1.3902.1082.530.530.2.4.2.1		not-accessible	Assignable card information entry.
INT zxAnVndAssignableGranularity	1.3.6.1.4.1.3902.1082.530.530.2.4.2.1.1	INTEGER	not-accessible	The assignment granularity of the VND.
I32 zxAnVndAssignableRack	1.3.6.1.4.1.3902.1082.530.530.2.4.2.1.2	Integer32	not-accessible	The rack number.
I32 zxAnVndAssignableShelf	1.3.6.1.4.1.3902.1082.530.530.2.4.2.1.3	Integer32	not-accessible	The shelf number.
I32 zxAnVndAssignableSlot	1.3.6.1.4.1.3902.1082.530.530.2.4.2.1.4	Integer32	not-accessible	The slot number.
I32 zxAnVndAssignableCardMainType	1.3.6.1.4.1.3902.1082.530.530.2.4.2.1.5	Integer32	read-only	The configured main type of the assignable card .
zxAnVndConfObjects	1.3.6.1.4.1.3902.1082.530.530.2.5
zxAnVndConfTable	1.3.6.1.4.1.3902.1082.530.530.2.5.2		not-accessible	VND configuration table.
zxAnVndConfEntry	1.3.6.1.4.1.3902.1082.530.530.2.5.2.1		not-accessible	VND configuration entry.
STR zxAnVndConfName	1.3.6.1.4.1.3902.1082.530.530.2.5.2.1.1	DisplayString	not-accessible	The name of the VND.
I32 zxAnVndConfId	1.3.6.1.4.1.3902.1082.530.530.2.5.2.1.2	Integer32	read-only	The identification of the VND.
INT zxAnVndConfAssignMode	1.3.6.1.4.1.3902.1082.530.530.2.5.2.1.3	INTEGER	read-create	The assignment mode of the VND. mixed(1): the card and interface can be assigned to the VND. port(2) : only the interface can be assigned to the VND. card(3) : only the card can be assigned to the VND. onu(4) : the PON port can be shared with the VND.
INT zxAnVndConfOperStatus	1.3.6.1.4.1.3902.1082.530.530.2.5.2.1.4	INTEGER	read-only	The operational status of the VND.
STR zxAnVndConfDescription	1.3.6.1.4.1.3902.1082.530.530.2.5.2.1.5	DisplayString	read-create	The description of the VND.
INT zxAnVndConfAction	1.3.6.1.4.1.3902.1082.530.530.2.5.2.1.6	INTEGER	read-create	Start or stop the VND. Starting the VND, the operational status will be running. Stopping the VND, the operational status will be stopped.
ROW zxAnVndConfRowStatus	1.3.6.1.4.1.3902.1082.530.530.2.5.2.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnVndIfAssignTable	1.3.6.1.4.1.3902.1082.530.530.2.5.3		not-accessible	VND interface assignment table.
zxAnVndIfAssignEntry	1.3.6.1.4.1.3902.1082.530.530.2.5.3.1		not-accessible	VND interface assignment entry. The interface assignment need to follow the following principles: 1. If the physical interface has been assigned to a VND, the subinterface can not be assigned to another VND. 2. If the subinterface has been assigned to a VND, the physical interface can not be assigned to another VND.
INT zxAnVndIfAssignMode	1.3.6.1.4.1.3902.1082.530.530.2.5.3.1.1	INTEGER	read-create	The assignment mode of the interface.
ROW zxAnVndIfAssignRowStatus	1.3.6.1.4.1.3902.1082.530.530.2.5.3.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnVndIfInfoTable	1.3.6.1.4.1.3902.1082.530.530.2.5.4		not-accessible	VND interface information table.
zxAnVndIfInfoEntry	1.3.6.1.4.1.3902.1082.530.530.2.5.4.1		not-accessible	VND interface information entry.
STR zxAnVndIfAssignedVndName	1.3.6.1.4.1.3902.1082.530.530.2.5.4.1.1	DisplayString	read-only	The VND name of the interface assigned to. If the assignment mode of the interface is shared, the VND names are seperated by comma, such as 'vnd1,vnd2'.
INT zxAnVndIfAssignStatus	1.3.6.1.4.1.3902.1082.530.530.2.5.4.1.2	INTEGER	read-only	The assignment status of the interface.
INT zxAnVndIfAssignmentMode	1.3.6.1.4.1.3902.1082.530.530.2.5.4.1.3	INTEGER	read-only	The assignment mode of the interface.
zxAnVndCardAssignTable	1.3.6.1.4.1.3902.1082.530.530.2.5.5		not-accessible	VND card assignment table.
zxAnVndCardAssignEntry	1.3.6.1.4.1.3902.1082.530.530.2.5.5.1		not-accessible	VND card assignment entry.
I32 zxAnVndCardRack	1.3.6.1.4.1.3902.1082.530.530.2.5.5.1.1	Integer32	not-accessible	Rack number.
I32 zxAnVndCardShelf	1.3.6.1.4.1.3902.1082.530.530.2.5.5.1.2	Integer32	not-accessible	Shelf number.
I32 zxAnVndCardSlot	1.3.6.1.4.1.3902.1082.530.530.2.5.5.1.3	Integer32	not-accessible	Slot number.
ROW zxAnVndCardAssignRowStatus	1.3.6.1.4.1.3902.1082.530.530.2.5.5.1.50	RowStatus	read-create	The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
zxAnVndCardInfoTable	1.3.6.1.4.1.3902.1082.530.530.2.5.6		not-accessible	VND card configuration table.
zxAnVndCardInfoEntry	1.3.6.1.4.1.3902.1082.530.530.2.5.6.1		not-accessible	VND card configuration entry.
STR zxAnVndCardAssignedVndName	1.3.6.1.4.1.3902.1082.530.530.2.5.6.1.4	DisplayString	read-only	The VND name of the card assigned to.
INT zxAnVndCardAssignStatus	1.3.6.1.4.1.3902.1082.530.530.2.5.6.1.5	INTEGER	read-only	The assignment status of the card.

RFC description

ZTE access network virtual network device (VND) management for resource allocation and configuration.

Start monitoring ZTE access node (DSLAM/OLT), ZTE broadband access equipment (virtual-network-device partition/provisioning status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-AN-VND-MIB

What Is ZTE-AN-VND-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description