ZTE-AN-QOSACL-PERF-MIB

All MIBs › ZTE-AN-QOSACL-PERF-MIB

Organization: ZTE Corporation

Last Updated: 2018-12-18

Category: ZTE Access Node (ZTE-AN) Management

Description: Monitors ZTE access node QoS ACL hit counters and performance statistics for policy analysis.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-AN-QOSACL-PERF-MIB?

ZTE-AN-QOSACL-PERF-MIB is a ZTE Corporation proprietary MIB (built on HC-PerfHist-TC-MIB) reporting QoS ACL performance history. Its current-minute-performance table, keyed by ACL number/rule ID, records elapsed time, packet/octet counts, and a reset action; a current-1-day-performance table mirrors the same fields at daily granularity; and a historical-minute-performance table adds interval number, valid-data flag, and date/time to the packet/octet counts. As a performance MIB it lets an administrator review ACL rule hit-rate history (packets/octets matched) over time on a ZTE Access Node device. It is deployed on ZTE Corporation Access Node equipment (QoS ACL performance history). Engineers can download the ZTE-AN-QOSACL-PERF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-QOSACL-PERF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE Corporation Access Node equipment (QoS ACL performance history)

Monitoring Examples

An administrator checks zxAnQosAclHisMinPerfTable to review historical ACL rule hit-rate trends on a ZTE Access Node device.

What Can Be Monitored

QoS ACL rule performance history (packets/octets matched)

Imported Objects

From HC-PerfHist-TC-MIB

HCPerfTimeElapsed

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
RowStatus
TruthValue

From ZTE-AN-ACL-MIB

zxAnAclNumber

OBJECT-TYPE

From ZTE-AN-SMI

zxAnQos

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using zxAnQosAclCMinPkts OID:

Select a ZTE Corporation Access Node equipment (ACL rule packet/octet hit-rate history status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxAnQosAclCMinPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of packets in current minutes interval. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxAnQosAclPerfMib	1.3.6.1.4.1.3902.1082.50.6			The MIB module for the management of the ACL performance.
zxAnQosAclPerfObjects	1.3.6.1.4.1.3902.1082.50.6.2
zxAnQosAclCurrMinPerfTable	1.3.6.1.4.1.3902.1082.50.6.2.2		not-accessible	The minutes interval performance data table of the ACL rule.
zxAnQosAclCurrMinPerfEntry	1.3.6.1.4.1.3902.1082.50.6.2.2.1		not-accessible	The minutes interval performance data entry of the ACL rule.
I32 zxAnQosAclCMinPerfAclNumber	1.3.6.1.4.1.3902.1082.50.6.2.2.1.1	Integer32	not-accessible	The number of an ACL.
I32 zxAnQosAclCMinPerfRuleId	1.3.6.1.4.1.3902.1082.50.6.2.2.1.2	Integer32	not-accessible	The ID of a rule.
HCP zxAnQosAclCMinTimeElapsed	1.3.6.1.4.1.3902.1082.50.6.2.2.1.3	HCPerfTimeElapsed	read-only	The number of seconds that have elapsed since the beginning of the current minutes interval.
C64 zxAnQosAclCMinPktsEx	1.3.6.1.4.1.3902.1082.50.6.2.2.1.4	Counter64	read-only	The number of packets in current minutes interval.
C64 zxAnQosAclCMinOcts	1.3.6.1.4.1.3902.1082.50.6.2.2.1.5	Counter64	read-only	The number of octets in current minutes interval.
INT zxAnQosAclCMinReset	1.3.6.1.4.1.3902.1082.50.6.2.2.1.50	INTEGER	read-write	Clear all the current minutes performance variables. When get this variable, always return 1.
zxAnQosAclCurr1DayPerfTable	1.3.6.1.4.1.3902.1082.50.6.2.3		not-accessible	The 1-day interval performance data table of the ACL rule.
zxAnQosAclCurr1DayPerfEntry	1.3.6.1.4.1.3902.1082.50.6.2.3.1		not-accessible	The 1-day interval performance data entry of the ACL rule.
I32 zxAnQosAclC1DPerfAclNumber	1.3.6.1.4.1.3902.1082.50.6.2.3.1.1	Integer32	not-accessible	The number of an ACL.
I32 zxAnQosAclC1DPerfRuleId	1.3.6.1.4.1.3902.1082.50.6.2.3.1.2	Integer32	not-accessible	The ID of a rule.
HCP zxAnQosAclC1DTimeElapsed	1.3.6.1.4.1.3902.1082.50.6.2.3.1.3	HCPerfTimeElapsed	read-only	The number of seconds that have elapsed since the beginning of the current 1-day interval.
C64 zxAnQosAclC1DPkts	1.3.6.1.4.1.3902.1082.50.6.2.3.1.4	Counter64	read-only	The number of packets in current 1-day interval.
C64 zxAnQosAclC1DOcts	1.3.6.1.4.1.3902.1082.50.6.2.3.1.5	Counter64	read-only	The number of octets in current 1-day interval.
INT zxAnQosAclC1DReset	1.3.6.1.4.1.3902.1082.50.6.2.3.1.50	INTEGER	read-write	Clear all the current 1-day performance variables. When get this variable, always return 1.
zxAnQosAclHisMinPerfTable	1.3.6.1.4.1.3902.1082.50.6.2.4		not-accessible	The minutes interval historical performance data table of the ACL rule.
zxAnQosAclHisMinPerfEntry	1.3.6.1.4.1.3902.1082.50.6.2.4.1		not-accessible	The minutes interval historical performance data entry of the ACL rule.
I32 zxAnQosAclHMinPerfAclNumber	1.3.6.1.4.1.3902.1082.50.6.2.4.1.1	Integer32	not-accessible	The number of an ACL.
I32 zxAnQosAclHMinPerfRuleId	1.3.6.1.4.1.3902.1082.50.6.2.4.1.2	Integer32	not-accessible	The ID of a rule.
I32 zxAnQosAclHMinIntervalNo	1.3.6.1.4.1.3902.1082.50.6.2.4.1.3	Integer32	not-accessible	The performance data interval number.
T/F zxAnQosAclHMinIntervalValidData	1.3.6.1.4.1.3902.1082.50.6.2.4.1.4	TruthValue	read-only	Performance data valid flag. true(1) means valid. false(2) means invalid and the performace data is useless.
DAT zxAnQosAclHMinDateTime	1.3.6.1.4.1.3902.1082.50.6.2.4.1.5	DateAndTime	read-only	The minutes interval performance data generation time.
C64 zxAnQosAclHMinPkts	1.3.6.1.4.1.3902.1082.50.6.2.4.1.6	Counter64	read-only	The number of packets in historical minutes interval.
C64 zxAnQosAclHMinOcts	1.3.6.1.4.1.3902.1082.50.6.2.4.1.7	Counter64	read-only	The number of octets in historical minutes interval.
zxAnQosAclHis1DayPerfTable	1.3.6.1.4.1.3902.1082.50.6.2.5		not-accessible	The 1-day interval historical performance data table of the ACL rule.
zxAnQosAclHis1DayPerfEntry	1.3.6.1.4.1.3902.1082.50.6.2.5.1		not-accessible	The 1-day interval historical performance data entry of the ACL rule.
I32 zxAnQosAclH1DPerfAclNumber	1.3.6.1.4.1.3902.1082.50.6.2.5.1.1	Integer32	not-accessible	The number of an ACL.
I32 zxAnQosAclH1DPerfRuleId	1.3.6.1.4.1.3902.1082.50.6.2.5.1.2	Integer32	not-accessible	The ID of a rule.
I32 zxAnQosAclH1DIntervalNo	1.3.6.1.4.1.3902.1082.50.6.2.5.1.3	Integer32	not-accessible	The performance data interval number.
T/F zxAnQosAclH1DIntervalValidData	1.3.6.1.4.1.3902.1082.50.6.2.5.1.4	TruthValue	read-only	Performance data valid flag. true(1) means valid. false(2) means invalid and the performace data is useless.
DAT zxAnQosAclH1DDateTime	1.3.6.1.4.1.3902.1082.50.6.2.5.1.5	DateAndTime	read-only	The 1-day interval performance data generation time.
C64 zxAnQosAclH1DPkts	1.3.6.1.4.1.3902.1082.50.6.2.5.1.6	Counter64	read-only	The number of packets in historical 1-day interval.
C64 zxAnQosAclH1DOcts	1.3.6.1.4.1.3902.1082.50.6.2.5.1.7	Counter64	read-only	The number of octets in historical 1-day interval.
zxAnQosAclPerfConformances	1.3.6.1.4.1.3902.1082.50.6.4
zxAnQosAclPerfCompliances	1.3.6.1.4.1.3902.1082.50.6.4.1
zxAnQosAclPerfCompliance	1.3.6.1.4.1.3902.1082.50.6.4.1.1			The compliance statement for support of the ACL performance MIB module.
zxAnQosAclPerfGroups	1.3.6.1.4.1.3902.1082.50.6.4.2
zxAnQosAclPerfCurrMinGroup	1.3.6.1.4.1.3902.1082.50.6.4.2.1			A collection of objects providing for current minute interval performance data of the ACL.
zxAnQosAclPerfCurr1DayGroup	1.3.6.1.4.1.3902.1082.50.6.4.2.2			A collection of objects providing for current 1-Day interval performance data of the ACL.
zxAnQosAclPerfHisMinGroup	1.3.6.1.4.1.3902.1082.50.6.4.2.3			A collection of objects providing for history minutes interval performance data of the ACL.
zxAnQosAclPerfHis1DayGroup	1.3.6.1.4.1.3902.1082.50.6.4.2.4			A collection of objects providing for history 1-day interval performance data of the ACL.

RFC description

Vendor-private MIB for ZTE (Zhongxing Telecom) equipment, manages Quality of Service (QOS) and Access Control List (ACL) performance metrics.

Start monitoring ZTE Corporation Access Node equipment (ACL rule packet/octet hit-rate history status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-AN-QOSACL-PERF-MIB