All MIBs › ZXR10-SYSLOG-SERVER-MIB
Organization: ZTE Corporation.
Last Updated: 2013-08-07
Category: ZTE ZXR10 System Management
Description: Manages ZTE ZXR10 remote syslog server configuration including target addresses, facility, severity filtering.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZXR10-SYSLOG-SERVER-MIB?
ZXR10-SYSLOG-SERVER-MIB is a ZTE-specific MIB for the ZXR10 router/switch platform that manages remote syslog server configuration rather than exposing device-wide event logs directly. It defines the syslog source address and interface (syslogServerSourceIPv4/IPv6, syslogServerSourceInterfaceName), the facility code applied to outgoing messages (syslogServerFacility, using standard syslog facility values like local0-local7), a syslogServerHostTable indexed by IP type/address/interface/VPN that lists each configured remote syslog host along with its forwarding/local ports (syslogServerFport, syslogServerLport) and per-host source addresses, and a global syslogServerLevel controlling minimum severity forwarded (emergency through debugging). Because syslog forwarding is a foundational piece of centralized log collection, monitoring this MIB is useful for confirming that a ZXR10 device is actually configured to send messages to the intended collector(s) at the correct severity threshold and facility, catching silent logging gaps before they hide real device events. It depends on standard SNMPv2-SMI/SNMPv2-TC and IPV6-TC imports and is deployed on ZTE ZXR10 series routers and switches; administrators setting up centralized logging can download the ZXR10-SYSLOG-SERVER-MIB file to load it into their MIB browser when auditing syslog destinations across a ZXR10 fleet.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-SYSLOG-SERVER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZTE ZXR10 series routers and switches
Monitoring Examples
An operator checks syslogServerHostTable entries for the expected collector IP address and syslogServerLevel setting; a host entry missing from the table, or a syslogServerLevel set too restrictively (e.g. emergency-only), would explain why expected log messages aren't arriving at the central syslog collector.
What Can Be Monitored
- configured syslog server host table entries
- syslog source IPv4/IPv6 address and interface
- syslog facility code
- per-host forwarding/local port configuration
- minimum syslog severity level forwarded
Imported Objects
From IPV6-TC
| Ipv6Address |
From SNMPv2-SMI
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TEXTUAL-CONVENTION | |
| enterprises |
From SNMPv2-TC
| DisplayString |
OIDs
RFC description
Syslog server protocol configuration and management for ZTE ZXR10 routers.
Start monitoring ZTE ZXR10 series routers and switches (remote syslog destination/facility/severity config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.