ZTE-UAS-MULTICAST-MIB

All MIBs › ZTE-UAS-MULTICAST-MIB

Organization: ZTE Co.

Last Updated: 2006-10-23

Category: ZTE Access Node (ZTE-AN) Management

Description: Manages ZTE Unified Access System multicast service configuration and subscriber group memberships.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-UAS-MULTICAST-MIB?

ZTE-UAS-MULTICAST-MIB is a vendor-specific MIB for ZTE's Unified Access System (UAS), a broadband access platform used in fixed-line access networks. It defines objects for configuring and managing IP multicast service delivery, including multicast group provisioning and subscriber group membership on the access node. Its monitoring value lies in tracking multicast service configuration state and subscriber group membership rather than classic hardware sensors, letting operators verify that multicast streams such as IPTV channels are correctly provisioned and joined per subscriber port. It likely complements standard IGMP/multicast MIBs and ZTE's broader UAS MIB tree for chassis and interface management. It is typically deployed in triple-play/FTTx access networks where a ZTE UAS delivers broadband, voice, and video to end subscribers. Engineers can download the ZTE-UAS-MULTICAST-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-UAS-MULTICAST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE Unified Access System (UAS) broadband access node

Monitoring Examples

No object names were provided in sample_objects for this MIB, so a concrete polling example can't be grounded in real identifiers; based on the module description, one would expect tables of multicast groups and per-subscriber membership entries. An operator would typically monitor which multicast groups are active and how many subscriber ports have joined each group to verify IPTV channel delivery across the access node. A subscriber complaint of a missing channel would prompt checking whether their port's group membership entry is present and correct.

What Can Be Monitored

multicast group configuration
subscriber group membership
active multicast streams per port

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
zte	1.3.6.1.4.1.3902
zxIgmpGroup	1.3.6.1.4.1.3902.1006.2.1.2
IP zxIgmpGroupAddr	1.3.6.1.4.1.3902.1006.2.1.2.1.1.1	IpAddress	read-only	IGMP group address.
zxIgmpGroupEntry	1.3.6.1.4.1.3902.1006.2.1.2.1.1		not-accessible	The entry of zxIgmpGroupTable
STR zxIgmpGroupExpire	1.3.6.1.4.1.3902.1006.2.1.2.1.1.5	DisplayString	read-only	The expire time length which the group will be expire, for static group the value is never,other is HH:MM:SS.
INT zxIgmpGroupFlag	1.3.6.1.4.1.3902.1006.2.1.2.1.1.3	INTEGER	read-only	Subscriber type,contains PPP and IP Subscriber type.
STR zxIgmpGroupInterface	1.3.6.1.4.1.3902.1006.2.1.2.1.1.2	DisplayString	read-only	IGMP group interface name,contains fei,smartgroup,vbui and so on
STR zxIgmpGroupLastReporterCircuit	1.3.6.1.4.1.3902.1006.2.1.2.1.1.6	DisplayString	read-only	The circuit of the last reporter.
STR zxIgmpGroupPresent	1.3.6.1.4.1.3902.1006.2.1.2.1.1.4	DisplayString	read-only	The time length since the group created,such as HH:MM:SS.
zxIgmpGroupTable	1.3.6.1.4.1.3902.1006.2.1.2.1		not-accessible	This table contains igmp group information
I32 zxIgmpImmediateLeave	1.3.6.1.4.1.3902.1006.2.1.2.2.1.12	Integer32	read-only	Immediate leave group number when receive release packet. 0 means IGMP immediate leave control is not set. 100 means IGMP immediate leave for all groups. other is group number.
I32 zxIgmpInboundAcl	1.3.6.1.4.1.3902.1006.2.1.2.2.1.11	Integer32	read-only	IGMP access-group. 0 means Inbound IGMP access group is not set
IP zxIgmpInfIpAddr	1.3.6.1.4.1.3902.1006.2.1.2.2.1.2	IpAddress	read-only	The IP address of the interface.
IP zxIgmpInfMask	1.3.6.1.4.1.3902.1006.2.1.2.2.1.3	IpAddress	read-only	The submask of the interface.
zxIgmpInfRevPktEntry	1.3.6.1.4.1.3902.1006.2.1.2.3.1		not-accessible	The entry of zxIgmpInfRevPktTable
zxIgmpInfRevPktTable	1.3.6.1.4.1.3902.1006.2.1.2.3		not-accessible	This table contains igmp interface received packets
zxIgmpInfSendPktEntry	1.3.6.1.4.1.3902.1006.2.1.2.4.1		not-accessible	The entry of zxIgmpInfSendPktTable
zxIgmpInfSendPktTable	1.3.6.1.4.1.3902.1006.2.1.2.4		not-accessible	This table contains igmp interface sent packets
STR zxIgmpInterface	1.3.6.1.4.1.3902.1006.2.1.2.2.1.1	DisplayString	read-only	IGMP interface name,contains fei,smartgroup,vbui and so on.
zxIgmpInterfaceEntry	1.3.6.1.4.1.3902.1006.2.1.2.2.1		not-accessible	The entry of zxIgmpInterfaceTable
zxIgmpInterfaceTable	1.3.6.1.4.1.3902.1006.2.1.2.2		not-accessible	This table contains igmp interface information
I32 zxIgmpLastMemQueryIntvl	1.3.6.1.4.1.3902.1006.2.1.2.2.1.6	Integer32	read-only	IGMP group-special query interval, the units is second. For Igmpv1 the value is 0.
I32 zxIgmpMaxResponseTime	1.3.6.1.4.1.3902.1006.2.1.2.2.1.7	Integer32	read-only	Max response time of IGMP group-special query, the units is second. For Igmpv1 the value is 0.
IP zxIgmpQuerier	1.3.6.1.4.1.3902.1006.2.1.2.2.1.9	IpAddress	read-only	The IP address of the querier.
STR zxIgmpQuerierExpire	1.3.6.1.4.1.3902.1006.2.1.2.2.1.10	DisplayString	read-only	The expire time length which the querier will be expire, the value is never or HH:MM:SS.
I32 zxIgmpQuerierTimeout	1.3.6.1.4.1.3902.1006.2.1.2.2.1.8	Integer32	read-only	The alive time that other uas can be a querier, the units is second. For Igmpv1 the value is 0.
I32 zxIgmpQueryInterval	1.3.6.1.4.1.3902.1006.2.1.2.2.1.5	Integer32	read-only	IGMP query interval,the units is second.
STR zxIgmpRevPktInterface	1.3.6.1.4.1.3902.1006.2.1.2.3.1.1	DisplayString	read-only	IGMP interface name,contains fei,smartgroup,vbui and so on.
I32 zxIgmpRevPktLeave	1.3.6.1.4.1.3902.1006.2.1.2.3.1.4	Integer32	read-only	Received leave packet count from this interface.
I32 zxIgmpRevPktOther	1.3.6.1.4.1.3902.1006.2.1.2.3.1.6	Integer32	read-only	Received other packet count from this interface.
I32 zxIgmpRevPktQuery	1.3.6.1.4.1.3902.1006.2.1.2.3.1.2	Integer32	read-only	Received query packet count from this interface.
I32 zxIgmpRevPktReportV1	1.3.6.1.4.1.3902.1006.2.1.2.3.1.5	Integer32	read-only	Received report IGMPv1 packet count from this interface.
I32 zxIgmpRevPktReportV2	1.3.6.1.4.1.3902.1006.2.1.2.3.1.3	Integer32	read-only	Received report IGMPv2 packet count from this interface.
I32 zxIgmpRevPktTotal	1.3.6.1.4.1.3902.1006.2.1.2.3.1.7	Integer32	read-only	Received total packet count from this interface.
STR zxIgmpSendPktInterface	1.3.6.1.4.1.3902.1006.2.1.2.4.1.1	DisplayString	read-only	IGMP interface name,contains fei,smartgroup,vbui and so on.
I32 zxIgmpSendPktQuery	1.3.6.1.4.1.3902.1006.2.1.2.4.1.2	Integer32	read-only	Sent query packet count from this interface.
I32 zxIgmpSendPktSpec	1.3.6.1.4.1.3902.1006.2.1.2.4.1.3	Integer32	read-only	Sent special IGMP packet count from this interface.
I32 zxIgmpSendPktTotal	1.3.6.1.4.1.3902.1006.2.1.2.4.1.4	Integer32	read-only	Sent total packet count from this interface.
zxIgmpServerLogEntry	1.3.6.1.4.1.3902.1006.2.1.2.5.1		not-accessible	The entry of zxIgmpServerLogTable
IP zxIgmpServerLogGroupAddr	1.3.6.1.4.1.3902.1006.2.1.2.5.1.5	IpAddress	read-only	The server multicast group address.
STR zxIgmpServerLogInterface	1.3.6.1.4.1.3902.1006.2.1.2.5.1.1	DisplayString	read-only	The interface name where the server lies
I32 zxIgmpServerLogPPPoESID	1.3.6.1.4.1.3902.1006.2.1.2.5.1.8	Integer32	read-only	The PPPoE session id.
INT zxIgmpServerLogProtocol	1.3.6.1.4.1.3902.1006.2.1.2.5.1.2	INTEGER	read-only	The protocol type.
STR zxIgmpServerLogRecTime	1.3.6.1.4.1.3902.1006.2.1.2.5.1.7	DisplayString	read-only	The time received.
IP zxIgmpServerLogSourceAddr	1.3.6.1.4.1.3902.1006.2.1.2.5.1.6	IpAddress	read-only	The server source address.
zxIgmpServerLogTable	1.3.6.1.4.1.3902.1006.2.1.2.5		not-accessible	This table contains igmp server log.
I32 zxIgmpServerLogVci	1.3.6.1.4.1.3902.1006.2.1.2.5.1.4	Integer32	read-only	The circuit vci or second vlan id.
I32 zxIgmpServerLogVpi	1.3.6.1.4.1.3902.1006.2.1.2.5.1.3	Integer32	read-only	The circuit vpi or vlan id.
STR zxIgmpUasAclDestAddr	1.3.6.1.4.1.3902.1006.2.1.4.3.1.2	DisplayString	read-only	The permitted destination IP address or any.
zxIgmpUasAclEntry	1.3.6.1.4.1.3902.1006.2.1.4.3.1		not-accessible	The entry of zxIgmpUasAclTable
IP zxIgmpUasAclSourceAddr	1.3.6.1.4.1.3902.1006.2.1.4.3.1.1	IpAddress	read-only	The permitted souce IP address.
INT zxIgmpUasAclSwitch	1.3.6.1.4.1.3902.1006.2.1.4.1	INTEGER	read-only	The switch of IGMP ACL.
zxIgmpUasAclTable	1.3.6.1.4.1.3902.1006.2.1.4.3		not-accessible	This table contains IGMP ACL permitted.
zxIgmpUasGroup	1.3.6.1.4.1.3902.1006.2.1.4
INT zxIgmpUasPrivateServerLogSwitch	1.3.6.1.4.1.3902.1006.2.1.4.2	INTEGER	read-only	The switch of IGMP private server log.
I32 zxIgmpUasServiceProfileAccGroup	1.3.6.1.4.1.3902.1006.2.1.4.4.1.2	Integer32	read-only	The service profile related security ACL.
STR zxIgmpUasServiceProfileDescr	1.3.6.1.4.1.3902.1006.2.1.4.4.1.3	DisplayString	read-only	The service profile description.
zxIgmpUasServiceProfileEntry	1.3.6.1.4.1.3902.1006.2.1.4.4.1		not-accessible	The entry of zxIgmpUasServiceProfileTable
I32 zxIgmpUasServiceProfileMaxGroup	1.3.6.1.4.1.3902.1006.2.1.4.4.1.4	Integer32	read-only	The max multicast group count
I32 zxIgmpUasServiceProfileMaxPrwCount	1.3.6.1.4.1.3902.1006.2.1.4.4.1.8	Integer32	read-only	The max preview count. This attribute is related to zxIgmpUasServiceProfilePrwGroup.
I32 zxIgmpUasServiceProfileMaxPrwGroup	1.3.6.1.4.1.3902.1006.2.1.4.4.1.5	Integer32	read-only	The max preview multicast group count.
I32 zxIgmpUasServiceProfileNumber	1.3.6.1.4.1.3902.1006.2.1.4.4.1.1	Integer32	read-only	The service profile number.
IP zxIgmpUasServiceProfilePrwGroup	1.3.6.1.4.1.3902.1006.2.1.4.4.1.6	IpAddress	read-only	The channel multicast group address.
IP zxIgmpUasServiceProfilePrwGroupMask	1.3.6.1.4.1.3902.1006.2.1.4.4.1.7	IpAddress	read-only	The channel multicast group address submask.
I32 zxIgmpUasServiceProfilePrwResumeIntvl	1.3.6.1.4.1.3902.1006.2.1.4.4.1.9	Integer32	read-only	The max preview time. This attribute is related to zxIgmpUasServiceProfilePrwGroup.
zxIgmpUasServiceProfileTable	1.3.6.1.4.1.3902.1006.2.1.4.4		not-accessible	This table contains IGMP service profile.
INT zxIgmpVersion	1.3.6.1.4.1.3902.1006.2.1.2.2.1.4	INTEGER	read-only	The version of IGMP running on the interface
zxMulticastMib	1.3.6.1.4.1.3902.1006.2			This mib defines multicast management for uas
STR zxPimBSR	1.3.6.1.4.1.3902.1006.2.1.3.1	DisplayString	read-only	BSR information.
STR zxPimCBsr	1.3.6.1.4.1.3902.1006.2.1.3.2	DisplayString	read-only	candidate BSR information of this router.
STR zxPimCRP	1.3.6.1.4.1.3902.1006.2.1.3.3	DisplayString	read-only	candidate RP information of this router.
zxPimGroup	1.3.6.1.4.1.3902.1006.2.1.3
zxPimRpMapEntry	1.3.6.1.4.1.3902.1006.2.1.3.4.1		not-accessible	The entry of zxPimRpMapTable
IP zxPimRpMapGroupAddr	1.3.6.1.4.1.3902.1006.2.1.3.4.1.1	IpAddress	read-only	The multicast group address.
IP zxPimRpMapGroupMask	1.3.6.1.4.1.3902.1006.2.1.3.4.1.2	IpAddress	read-only	The multicast group address submask.
IP zxPimRpMapRpAddr	1.3.6.1.4.1.3902.1006.2.1.3.4.1.3	IpAddress	read-only	The rp address.
STR zxPimRpMapRpDescr	1.3.6.1.4.1.3902.1006.2.1.3.4.1.4	DisplayString	read-only	The rp description,such as type and priority.
zxPimRpMapTable	1.3.6.1.4.1.3902.1006.2.1.3.4		not-accessible	This table contains pim rp map.
IP zxPimSmAddr	1.3.6.1.4.1.3902.1006.2.1.3.5.1.1	IpAddress	read-only	The interface Ip address.
IP zxPimSmDR	1.3.6.1.4.1.3902.1006.2.1.3.5.1.6	IpAddress	read-only	The DR Ip address.
I32 zxPimSmDrPriority	1.3.6.1.4.1.3902.1006.2.1.3.5.1.7	Integer32	read-only	The DR priority.
STR zxPimSmInterface	1.3.6.1.4.1.3902.1006.2.1.3.5.1.2	DisplayString	read-only	The interface name.
zxPimSmInterfaceTable	1.3.6.1.4.1.3902.1006.2.1.3.5		not-accessible	This table contains pimsm interface information.
zxPimSmIntfEntry	1.3.6.1.4.1.3902.1006.2.1.3.5.1		not-accessible	The entry of zxPimSmInterfaceTable
INT zxPimSmIntfState	1.3.6.1.4.1.3902.1006.2.1.3.5.1.3	INTEGER	read-only	The interface state.
IP zxPimSmNbrAddr	1.3.6.1.4.1.3902.1006.2.1.3.6.1.1	IpAddress	read-only	The neighbour Ip address.
I32 zxPimSmNbrCount	1.3.6.1.4.1.3902.1006.2.1.3.5.1.4	Integer32	read-only	The neighbour count.
I32 zxPimSmNbrDrPriority	1.3.6.1.4.1.3902.1006.2.1.3.6.1.3	Integer32	read-only	The DR priority.
zxPimSmNbrEntry	1.3.6.1.4.1.3902.1006.2.1.3.6.1		not-accessible	The entry of zxPimSmNbrTable
STR zxPimSmNbrExpire	1.3.6.1.4.1.3902.1006.2.1.3.6.1.5	DisplayString	read-only	The time of the neighbour expires.
STR zxPimSmNbrIntf	1.3.6.1.4.1.3902.1006.2.1.3.6.1.2	DisplayString	read-only	The interface name.
zxPimSmNbrTable	1.3.6.1.4.1.3902.1006.2.1.3.6		not-accessible	This table contains pimsm neighbour information.
STR zxPimSmNbrUptime	1.3.6.1.4.1.3902.1006.2.1.3.6.1.4	DisplayString	read-only	The time of the neighbour created.
INT zxPimSmNbrVer	1.3.6.1.4.1.3902.1006.2.1.3.6.1.6	INTEGER	read-only	The IGMP version.
zxPimSmPktEntry	1.3.6.1.4.1.3902.1006.2.1.3.7.1		not-accessible	The entry of zxPimSmPktTable
STR zxPimSmPktIntf	1.3.6.1.4.1.3902.1006.2.1.3.7.1.1	DisplayString	read-only	The interface name.
I32 zxPimSmPktRxError	1.3.6.1.4.1.3902.1006.2.1.3.7.1.5	Integer32	read-only	The error packet received from this interface.
I32 zxPimSmPktRxOk	1.3.6.1.4.1.3902.1006.2.1.3.7.1.3	Integer32	read-only	The ok packet received from this interface.
zxPimSmPktTable	1.3.6.1.4.1.3902.1006.2.1.3.7		not-accessible	This table contains pimsm packet information.
I32 zxPimSmPktTxError	1.3.6.1.4.1.3902.1006.2.1.3.7.1.6	Integer32	read-only	The error packet sent from this interface.
I32 zxPimSmPktTxOk	1.3.6.1.4.1.3902.1006.2.1.3.7.1.4	Integer32	read-only	The ok packet sent from this interface.
INT zxPimSmPktType	1.3.6.1.4.1.3902.1006.2.1.3.7.1.2	INTEGER	read-only	The packet type.
I32 zxPimSmQueryIntvl	1.3.6.1.4.1.3902.1006.2.1.3.5.1.5	Integer32	read-only	The query inerval,the units is second.
zxUas	1.3.6.1.4.1.3902.1006
zxUasMulticastMibObjects	1.3.6.1.4.1.3902.1006.2.1
INT zxUasMulticastSwitch	1.3.6.1.4.1.3902.1006.2.1.1	INTEGER	read-only	The switch of multicast
zxUasTraps	1.3.6.1.4.1.3902.1006.2.2

RFC description

Manages multicast configuration including IGMP group information and PIM protocol settings.

Start monitoring ZTE Unified Access System (UAS) broadband access node (multicast-group provisioning/subscriber-membership status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-UAS-MULTICAST-MIB

What Is ZTE-UAS-MULTICAST-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description