ZTE-AN-CES-MIB

All MIBs › ZTE-AN-CES-MIB

Organization: ZTE Corporation

Last Updated: 2016-12-25

Category: ZTE Access Node (ZTE-AN) Management

Description: Manages ZTE access node Circuit Emulation Service configuration for TDM-over-packet transport.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZTE-AN-CES-MIB?

ZTE-AN-CES-MIB manages Circuit Emulation Service (CES) configuration on ZTE access node equipment, enabling TDM (e.g. E1/T1) circuits to be carried over a packet-switched transport network. It exposes configuration data organized around TDM slot/port/MAC/IP tables that bind emulated TDM circuits to the underlying packet transport addressing, plus SDH loopback test configuration for the access node's SDH ports. As a service-provisioning MIB its monitoring value lies in verifying that CES bindings (slot/port to MAC/IP mapping) are correctly provisioned and that SDH loopback tests report expected results, which surfaces transport-layer misconfiguration or hardware faults on the TDM-over-packet path before they cause circuit outages. It builds on TDM/SDH transport standards and packet (IP/MAC) addressing conventions rather than a single external MIB. It is deployed on ZTE access nodes providing legacy TDM circuit emulation services over Ethernet/IP or SDH-based packet transport networks, where ZTE-AN-CES-MIB SNMP monitoring verifies CES bindings and SDH loopback results.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZTE-AN-CES-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE access node equipment (TDM/CES over packet or SDH transport)

Monitoring Examples

An admin would poll zxAnCesTdmSlotMacIpTable/zxAnCesTdmSlotMacIpEntry to confirm each TDM slot/port (zxAnCesTdmSlot, zxAnCesTdmPort) is correctly bound to its MAC and IP address (zxAnCesTdmMac, zxAnCesTdmIpAddress) for circuit emulation, and check zxAnCesTdmRowStatus to confirm the row is active. Separately, polling zxAnCesSdhLoopbackTable/zxAnCesSdhLoopBackEntry (zxAnCesSdhLoopBackSlot/Port) would reveal whether an SDH loopback test is active on a given slot/port, which if left enabled unexpectedly would explain a circuit appearing down.

What Can Be Monitored

TDM slot/port to MAC/IP binding
CES row/provisioning status
SDH loopback test state per slot/port

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TruthValue

From ZTE-AN-SMI

zxAnCes

OBJECT-IDENTITY

From ZTE-AN-TC-MIB

VlanId

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxAnCesMib	1.3.6.1.4.1.3902.1082.140.15			The MIB module for the management of CES.
zxAnCesGlobalObjects	1.3.6.1.4.1.3902.1082.140.15.1
zxAnCesObjects	1.3.6.1.4.1.3902.1082.140.15.2
zxAnCesSlotObjects	1.3.6.1.4.1.3902.1082.140.15.2.1
zxAnCesTdmSlotMacIpTable	1.3.6.1.4.1.3902.1082.140.15.2.1.1		not-accessible
zxAnCesTdmSlotMacIpEntry	1.3.6.1.4.1.3902.1082.140.15.2.1.1.1		not-accessible	ClockSource entry. Entries in the zxClkSrcTable are created and deleted using the zxClkSrcEntryStatus object.
I32 zxAnCesTdmSlot	1.3.6.1.4.1.3902.1082.140.15.2.1.1.1.1	Integer32	not-accessible	This object indicates the slot number.
I32 zxAnCesTdmPort	1.3.6.1.4.1.3902.1082.140.15.2.1.1.1.2	Integer32	not-accessible	This object indicates the port number on one card within the slot. 0: means all port
MAC zxAnCesTdmMac	1.3.6.1.4.1.3902.1082.140.15.2.1.1.1.3	MacAddress	read-create	This object indicates mac address for the slot & port.
IPt zxAnCesTdmIpType	1.3.6.1.4.1.3902.1082.140.15.2.1.1.1.4	InetAddressType	read-create	This object indicates the type of IP address denoted in zxAnPtpProtocolIpAddress object.
IP zxAnCesTdmIpAddress	1.3.6.1.4.1.3902.1082.140.15.2.1.1.1.5	InetAddress	read-create	This object indicates Ip address of the slot & port.
ROW zxAnCesTdmRowStatus	1.3.6.1.4.1.3902.1082.140.15.2.1.1.1.50	RowStatus	read-create	The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
zxAnCesSdhLoopbackTable	1.3.6.1.4.1.3902.1082.140.15.2.1.2		not-accessible
zxAnCesSdhLoopBackEntry	1.3.6.1.4.1.3902.1082.140.15.2.1.2.1		not-accessible	LOOP back test. first to creat mib, this postion is temp
I32 zxAnCesSdhLoopBackSlot	1.3.6.1.4.1.3902.1082.140.15.2.1.2.1.1	Integer32	not-accessible	This object indicates the slot number.
I32 zxAnCesSdhLoopBackPort	1.3.6.1.4.1.3902.1082.140.15.2.1.2.1.2	Integer32	not-accessible	This object indicates the port number on one card within the slot. 0: means all port
INT zxAnCesSdhLoopBackMode	1.3.6.1.4.1.3902.1082.140.15.2.1.2.1.3	INTEGER	read-create	This object indicates the loopback mode.
ROW zxAnCesSdhLoopBackRowStatus	1.3.6.1.4.1.3902.1082.140.15.2.1.2.1.50	RowStatus	read-create	The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
zxAnCesPWObjects	1.3.6.1.4.1.3902.1082.140.15.2.15
zxAnCesMef8PWTable	1.3.6.1.4.1.3902.1082.140.15.2.15.1		not-accessible
zxAnCesMef8PWEntry	1.3.6.1.4.1.3902.1082.140.15.2.15.1.1		not-accessible
I32 zxAnCesMef8PWId	1.3.6.1.4.1.3902.1082.140.15.2.15.1.1.1	Integer32	not-accessible
STR zxAnCesMef8PWName	1.3.6.1.4.1.3902.1082.140.15.2.15.1.1.2	DisplayString	read-create
VLA zxAnCesMef8PWVlanId	1.3.6.1.4.1.3902.1082.140.15.2.15.1.1.3	VlanId	read-create
I32 zxAnCesMef8PWPriority	1.3.6.1.4.1.3902.1082.140.15.2.15.1.1.4	Integer32	read-create
MAC zxAnCesMef8PWDestMac	1.3.6.1.4.1.3902.1082.140.15.2.15.1.1.5	MacAddress	read-create
I32 zxAnCesMef8PWEcIdSend	1.3.6.1.4.1.3902.1082.140.15.2.15.1.1.6	Integer32	read-create
I32 zxAnCesMef8PWEcIdExpt	1.3.6.1.4.1.3902.1082.140.15.2.15.1.1.7	Integer32	read-create
I32 zxAnCesMef8PWPayloadSize	1.3.6.1.4.1.3902.1082.140.15.2.15.1.1.8	Integer32	read-create
I32 zxAnCesMef8PWJitterBufferSize	1.3.6.1.4.1.3902.1082.140.15.2.15.1.1.9	Integer32	read-create
T/F zxAnCesMef8PWRtpUsed	1.3.6.1.4.1.3902.1082.140.15.2.15.1.1.10	TruthValue	read-create
OCT zxAnCesMef8PWRtpSsrc	1.3.6.1.4.1.3902.1082.140.15.2.15.1.1.11	OCTET STRING	read-create
ROW zxAnCesMef8PWRowStatus	1.3.6.1.4.1.3902.1082.140.15.2.15.1.1.50	RowStatus	read-create	The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
zxAnCesControllerTable	1.3.6.1.4.1.3902.1082.140.15.2.15.2		not-accessible
zxAnCesControllerEntry	1.3.6.1.4.1.3902.1082.140.15.2.15.2.1		not-accessible
STR zxAnCesControllID	1.3.6.1.4.1.3902.1082.140.15.2.15.2.1.1	DisplayString	read-create
ROW zxAnCesControllRowStatus	1.3.6.1.4.1.3902.1082.140.15.2.15.2.1.50	RowStatus	read-create	.
zxAnCesTdmSeriveObjects	1.3.6.1.4.1.3902.1082.140.15.2.17
zxAnCesTdmServiceTable	1.3.6.1.4.1.3902.1082.140.15.2.17.1		not-accessible
zxAnCesTdmServiceEntry	1.3.6.1.4.1.3902.1082.140.15.2.17.1.1		not-accessible
I32 zxAnCesTdmServiceId	1.3.6.1.4.1.3902.1082.140.15.2.17.1.1.1	Integer32	not-accessible	type(2:), slot(5:),port(6:),maptype(1:), AU4(4:),TUG3(2:),TUG2(3:),TU12(2:) AU3(6:),TUG2(3:,TU11(2:)
I32 zxAnCesTdmServiceChannelGroupId	1.3.6.1.4.1.3902.1082.140.15.2.17.1.1.2	Integer32	not-accessible
INT zxAnCesTdmServicePWType	1.3.6.1.4.1.3902.1082.140.15.2.17.1.1.3	INTEGER	read-create
I32 zxAnCesTdmServicePWId	1.3.6.1.4.1.3902.1082.140.15.2.17.1.1.4	Integer32	read-create
ROW zxAnCesTdmServiceRowStatus	1.3.6.1.4.1.3902.1082.140.15.2.17.1.1.50	RowStatus	read-create	The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
zxAnCesNotifications	1.3.6.1.4.1.3902.1082.140.15.3

RFC description

ZTE Circuit Emulation Service (CES) MIB for TDM service and pseudo-wire management.

Start monitoring ZTE access node equipment, TDM/CES over packet or SDH transport (CES-binding/SDH-loopback-test status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZTE-AN-CES-MIB

What Is ZTE-AN-CES-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description