ZXR10-LSP-MAN-MIB

All MIBs › ZXR10-LSP-MAN-MIB

Organization: ZTE Corporation.

Last Updated: 2013-04-24

Category: ZTE ZXR10 MPLS and Traffic Engineering

Description: Manages ZTE ZXR10 MPLS LSP provisioning, status, and label forwarding entry administration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-LSP-MAN-MIB?

ZXR10-LSP-MAN-MIB is a ZTE private module supplying textual conventions and managed objects for the LSP (Label Switched Path) manager on ZXR10 MPLS-capable routers. It defines configuration and status data related to LSP provisioning, current state, and label forwarding entries within the router's MPLS control plane. Its monitoring relevance lies in exposing the operational/software status of provisioned LSPs, letting an operator see whether a given label-switched path is up, down, or in an error state, which is central to diagnosing MPLS forwarding-plane health. It is closely tied to standard MPLS MIBs (e.g., MPLS-LSR-MIB, MPLS-TE-MIB) since LSP manager objects typically cross-reference label and interface indices defined there. Typical deployment is on ZTE ZXR10 provider-edge or core routers running MPLS in service-provider backbone networks. Network engineers evaluating or troubleshooting this functionality can download the ZXR10-LSP-MAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-LSP-MAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 MPLS router (provider edge/core)

Monitoring Examples

No sample objects were supplied for this module, so exact table names cannot be cited from source; based on its stated purpose, an administrator would poll LSP status and label forwarding entries to confirm an established LSP remains up and correctly mapped to its outgoing label. An LSP reported down or a missing label forwarding entry would indicate an MPLS path failure requiring rerouting or repair.

What Can Be Monitored

LSP operational status
label forwarding entry state
LSP provisioning configuration

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString

From ZXR10-SMI

zxr10RosngMIB

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxr10LspManMIB	1.3.6.1.4.1.3902.3.6000.401			This MIB module provides commonly used textual conventions for lsp manager.
zxr10LspManGlobalObjects	1.3.6.1.4.1.3902.3.6000.401.1
INT zxr10LspManGrEnable	1.3.6.1.4.1.3902.3.6000.401.1.1	INTEGER	read-only	The config of gr service status for PSS module. 1: means Gr of PSS module is disable. 2: means Gr of PSS module is enable.
zxr10LspManObjects	1.3.6.1.4.1.3902.3.6000.401.2
zxr10LspmFwdTable	1.3.6.1.4.1.3902.3.6000.401.2.1		not-accessible	A tabel of label forward information.
zxr10LspmFwdEntry	1.3.6.1.4.1.3902.3.6000.401.2.1.1		not-accessible	An entry to label forward table.
IP zxr10LspmFwdDestAddr	1.3.6.1.4.1.3902.3.6000.401.2.1.1.1	IpAddress	not-accessible	The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table-access mechanisms defined by the network management protocol in use.
I32 zxr10LspmFwdDestMask	1.3.6.1.4.1.3902.3.6000.401.2.1.1.2	Integer32	not-accessible	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 8 class-A 16 class-B 24 class-C If the value of the ipRouteDest is 0 (a default route), then the mask value is also 0. It should be noted that all IP routing subsystems implicitly use this mechanism.
I32 zxr10LspmFwdOutsegTag	1.3.6.1.4.1.3902.3.6000.401.2.1.1.3	Integer32	not-accessible	This value is used to distinguish out segment who have the same Dest and Mask.In other words, it's a speical id for out segment with the same destination IP address.
IP zxr10LspmFwdNextHop	1.3.6.1.4.1.3902.3.6000.401.2.1.1.4	IpAddress	read-only	The IP address of the next hop of this route.(In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
STR zxr10LspmFwdOutIfName	1.3.6.1.4.1.3902.3.6000.401.2.1.1.5	DisplayString	read-only	The interface name which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
U32 zxr10LspmFwdInLabel	1.3.6.1.4.1.3902.3.6000.401.2.1.1.6	Unsigned32	read-only	The incoming label of this LSP.
U32 zxr10LspmFwdOutLabel	1.3.6.1.4.1.3902.3.6000.401.2.1.1.7	Unsigned32	read-only	The outgoing label of this LSP.
INT zxr10LspmFwdSpecialFlag	1.3.6.1.4.1.3902.3.6000.401.2.1.1.8	INTEGER	read-only	This flag indicate the link info about this IP address. 1: means it's an master entry,at the sametime,indicate the master link under fast-re-route application. 2: means it's a slave entry under fast-re-route application. 3: means it's a loadshare entry. 4: means none of the above.
zxr10LspInstTable	1.3.6.1.4.1.3902.3.6000.401.2.2		not-accessible	A tabel of static LSP instance config.
zxr10LspInstEntry	1.3.6.1.4.1.3902.3.6000.401.2.2.1		not-accessible	An entry to static LSP instance table.
STR zxr10LspInstName	1.3.6.1.4.1.3902.3.6000.401.2.2.1.1	DisplayString	not-accessible	Static LSP instance name, which is key of instance.
U32 zxr10LspInstInLabel	1.3.6.1.4.1.3902.3.6000.401.2.2.1.2	Unsigned32	read-only	The incoming label of this Staic LSP instance, label range is static label range.
IP zxr10LspInstDestAddr	1.3.6.1.4.1.3902.3.6000.401.2.2.1.3	IpAddress	read-only	IPv4 address, which is the static LSP instance binding to.
IP zxr10LspInstDestMask	1.3.6.1.4.1.3902.3.6000.401.2.2.1.4	IpAddress	read-only	IPv4 mask, which is the static LSP instance binding to.
INT zxr10LspInstForceFlag	1.3.6.1.4.1.3902.3.6000.401.2.2.1.5	INTEGER	read-only	This flag indicate whether force to advertise incoming label to upstream. 1: means it's not forcing to advertise in-label to upstream. 2: means it's forcing to advertise in-label to upstream.
INT zxr10LspInstDestFlag	1.3.6.1.4.1.3902.3.6000.401.2.2.1.6	INTEGER	read-only	This flag indicate whether bind FEC to the static LSP instance. 1: means FEC is not binding to the static LSP instance. 2: means FEC is binding to the static LSP instance.
zxr10LspOutsegTable	1.3.6.1.4.1.3902.3.6000.401.2.3		not-accessible	A tabel of static LSP outsegment config.
zxr10LspOutsegEntry	1.3.6.1.4.1.3902.3.6000.401.2.3.1		not-accessible	An entry to static LSP outsegment table.
STR zxr10LspOutsegInstName	1.3.6.1.4.1.3902.3.6000.401.2.3.1.1	DisplayString	not-accessible	The name of static LSP instance, which the out segment belong to.
STR zxr10LspOutsegIfName	1.3.6.1.4.1.3902.3.6000.401.2.3.1.2	DisplayString	not-accessible	The interface name which uniquely identifies the local interface through which the next hop of this out segment should be reached. .
IP zxr10LspOutsegNexthop	1.3.6.1.4.1.3902.3.6000.401.2.3.1.3	IpAddress	not-accessible	The IP address of the next hop of this out segment.
U32 zxr10LspOutsegLabel	1.3.6.1.4.1.3902.3.6000.401.2.3.1.4	Unsigned32	read-only	The outgoing label of this Staic LSP instance..
INT zxr10LspOutsegForceFlag	1.3.6.1.4.1.3902.3.6000.401.2.3.1.5	INTEGER	read-only	This flag indicate whether force to use configured label as out-label. 1: means it's not forcing to use configured label as out-label. 2: means it's forcing to use configured label as out-label.
zxr10LspManTraps	1.3.6.1.4.1.3902.3.6000.401.3
zxr10LspManConformance	1.3.6.1.4.1.3902.3.6000.401.4

RFC description

Label Switched Path (LSP) manager for ZTE routers with graceful restart support.

Start monitoring ZTE ZXR10 MPLS router, provider edge/core (LSP provisioning/up-down-state status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-LSP-MAN-MIB

What Is ZXR10-LSP-MAN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description