ZXR10-MAC-MIB

All MIBs › ZXR10-MAC-MIB

Organization: ZTE Corporation.

Last Updated: 2013-05-02

Category: ZTE ZXR10 Layer 2 Switching

Description: Manages ZTE ZXR10 MAC address table entries, aging timers, and static MAC address configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-MAC-MIB?

ZXR10-MAC-MIB is a ZTE enterprise MIB for the ZXR10 switch/router platform running the ZXROS/ZXROSNG operating system, providing management of the device's Layer 2 MAC address table. It exposes global MAC address table configuration (such as aging behavior) and per-interface MAC configuration, governing how learned and static MAC address entries are managed on the switch. Its monitoring role is primarily software/forwarding-table status: confirming MAC aging-timer configuration and per-interface MAC learning settings, which helps diagnose issues like MAC table flapping, excessive relearning, or static MAC entries not taking effect as configured. It builds on the standard bridge/forwarding concepts found in IETF BRIDGE-MIB conventions, though implemented as a ZTE-proprietary tree rather than a direct extension of that MIB. It is deployed on ZTE ZXR10 switches and routers in enterprise or carrier access/aggregation networks wherever Layer 2 MAC address table behavior needs to be monitored or tuned. Engineers can download the ZXR10-MAC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-MAC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 switch/router

Monitoring Examples

An administrator would check macGlobalConfig to confirm the switch-wide MAC address aging timer setting, and macInterfaceConfig to verify per-interface MAC learning or static-entry behavior on a specific port. If end-station connectivity issues correlate with frequent MAC relearning, comparing the configured aging timer in macGlobalConfig against observed relearn frequency can reveal whether the timer is set too aggressively for the network's traffic pattern.

What Can Be Monitored

MAC address aging timer
per-interface MAC address configuration

Imported Objects

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
zte	1.3.6.1.4.1.3902
zxr10	1.3.6.1.4.1.3902.3
zxr10MacConfig	1.3.6.1.4.1.3902.3.888			ZXROSNG MAC config
macGlobalConfig	1.3.6.1.4.1.3902.3.888.1
U32 macGlobalCurrentNum	1.3.6.1.4.1.3902.3.888.1.1	Unsigned32	read-only	Current MAC Number Total.
U32 macGlobalMaxNum	1.3.6.1.4.1.3902.3.888.1.2	Unsigned32	read-only	Max MAC number Total.
U32 macGlobalAgingTime	1.3.6.1.4.1.3902.3.888.1.3	Unsigned32	read-only	MAC aging-time.
INT macGlobalProtect	1.3.6.1.4.1.3902.3.888.1.4	INTEGER	read-only	Configuration of MAC protect global.
U32 macGlobalProtectTime	1.3.6.1.4.1.3902.3.888.1.5	Unsigned32	read-only	Configuration of MAC protect-time.
INT macGlobalLearning	1.3.6.1.4.1.3902.3.888.1.6	INTEGER	read-only	Configuration of MAC learning global. Default is enable.
INT macGlobalLearnStrategy	1.3.6.1.4.1.3902.3.888.1.7	INTEGER	read-only	Configuration of MAC learn-strategy, include: by-switchchip and by-NP. Default is by-switchchip.
INT macGlobalHigigLearn	1.3.6.1.4.1.3902.3.888.1.8	INTEGER	read-only	Configuration of MAC global higig learn, include: normal and special. Default is normal.
INT macGlobalLogAlarm	1.3.6.1.4.1.3902.3.888.1.9	INTEGER	read-only	Configuration of MAC alarm for mac-move. Default is disable.
INT macGlobalToPermanentAutoWrite	1.3.6.1.4.1.3902.3.888.1.10	INTEGER	read-only	Configuration of autowrite toPermanent MAC to FLASH. Default is disable.
U32 macGlobalToPermanentAutoWriteInterval	1.3.6.1.4.1.3902.3.888.1.11	Unsigned32	read-only	Interval for autowrite toPermanent MAC to FLASH. Default is one day.
U32 macGlobalAlarmThreshold	1.3.6.1.4.1.3902.3.888.1.12	Unsigned32	read-only	MAC alarm threshold.
U32 macGlobalHistoryMaxNum	1.3.6.1.4.1.3902.3.888.1.13	Unsigned32	read-only	MAC history max num.
macInterfaceConfig	1.3.6.1.4.1.3902.3.888.2
macInterfaceConfigTable	1.3.6.1.4.1.3902.3.888.2.1		not-accessible	Configuration and status for MAC table on port.
macInterfaceConfigEntry	1.3.6.1.4.1.3902.3.888.2.1.1		not-accessible
U32 macIfIndex	1.3.6.1.4.1.3902.3.888.2.1.1.1	Unsigned32	read-only	Port out-index.
OCT macIfName	1.3.6.1.4.1.3902.3.888.2.1.1.2	OCTET STRING	read-only	Port name.
INT macIfLearning	1.3.6.1.4.1.3902.3.888.2.1.1.3	INTEGER	read-only	Configuration of MAC learning on port. Default is enable.
U32 macIfMaxNum	1.3.6.1.4.1.3902.3.888.2.1.1.4	Unsigned32	read-only	Configuration of max MAC number on port. Command of limit-num and unknow-filter-limit-num can change this value both.
U32 macIfCurrentNum	1.3.6.1.4.1.3902.3.888.2.1.1.5	Unsigned32	read-only	Current MAC number on port.
INT macIfUnknownSourceFilter	1.3.6.1.4.1.3902.3.888.2.1.1.6	INTEGER	read-only	Configuration of discarding unknownsource MAC or not on port. Default is disable.
INT macIfProtect	1.3.6.1.4.1.3902.3.888.2.1.1.7	INTEGER	read-only	Configuration of MAC protect on port. Default is disable.
INT macIfToPermanent	1.3.6.1.4.1.3902.3.888.2.1.1.8	INTEGER	read-only	Configuration of MAC toPermanent function on port. Default is disable.
INT macIfSafeModePolicy	1.3.6.1.4.1.3902.3.888.2.1.1.9	INTEGER	read-only	Configuration of MAC policy for safemode on port. Including disable, enableAlarm and enableShutdown. Default is disable.
INT macIfMaxNumPolicy	1.3.6.1.4.1.3902.3.888.2.1.1.10	INTEGER	read-only	Configuration of MAC policy while reach max MAC on port. Command of limit-num can set stopLearn, and command of unknow-filter-limit-num can set unknownFilt. Default is stopLearn.
macVlanConfig	1.3.6.1.4.1.3902.3.888.3
macVlanConfigTable	1.3.6.1.4.1.3902.3.888.3.1		not-accessible	Configuration and status for MAC table in vlan.
macVlanConfigEntry	1.3.6.1.4.1.3902.3.888.3.1.1		not-accessible
U32 macVlanIndex	1.3.6.1.4.1.3902.3.888.3.1.1.1	Unsigned32	read-only	Vlan ID.
INT macVlanLearning	1.3.6.1.4.1.3902.3.888.3.1.1.2	INTEGER	read-only	Configuration of MAC learning in vlan.
U32 macVlanCurrentNum	1.3.6.1.4.1.3902.3.888.3.1.1.3	Unsigned32	read-only	Current MAC number in vlan.
macItem	1.3.6.1.4.1.3902.3.888.4
macItemTable	1.3.6.1.4.1.3902.3.888.4.1		not-accessible	MAC table items.
macItemEntry	1.3.6.1.4.1.3902.3.888.4.1.1		not-accessible
U32 macItemVlan	1.3.6.1.4.1.3902.3.888.4.1.1.1	Unsigned32	read-only	Vlan ID.
MAC macItemAddr	1.3.6.1.4.1.3902.3.888.4.1.1.2	MacAddress	read-only	Mac address.
OCT macItemPortName	1.3.6.1.4.1.3902.3.888.4.1.1.3	OCTET STRING	read-only	Port name.
INT macItemFilterType	1.3.6.1.4.1.3902.3.888.4.1.1.4	INTEGER	read-only	MAC filter type. Including noFilter, srcFilter, dstFilter and bothFilter.
INT macItemWorkMode	1.3.6.1.4.1.3902.3.888.4.1.1.5	INTEGER	read-only	Status of item storage in MAC table. Including dynamic, static, permanent, toStatic and toPermanent.

RFC description

ZTE ZXR10 MAC configuration MIB for managing MAC address tables.

Start monitoring ZTE ZXR10 switch/router (MAC-address-table aging/per-interface learning config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-MAC-MIB

What Is ZXR10-MAC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description