ZXR10-QOS-CAR-MIB

All MIBs › ZXR10-QOS-CAR-MIB

Organization: ZTE Corporation

Last Updated: 2017-01-09

Category: ZTE ZXR10 Quality of Service

Description: Manages ZTE ZXR10 QoS Committed Access Rate (CAR) policies for ingress and egress bandwidth limiting.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-QOS-CAR-MIB?

ZXR10-QOS-CAR-MIB is a ZTE Corporation proprietary MIB (ZXR10/ZXROS platform family) implementing CAR (Committed Access Rate) traffic policing (ZXROS) on ZTE ZXR10 carrier routers/switches. Its objects cover a per-interface CAR table keyed by direction/protocol with two-level match-type/value criteria (string, 32-bit word, or range), committed/peak/excess information rate and burst size (CIR/CBS/PIR/PBS/EBS), and per-color (green/yellow/red) action flag/value with a shared-statistics flag and color mode. As a configuration/status MIB it lets an administrator audit and monitor CAR (Committed Access Rate) traffic policing (ZXROS) on a ZXR10 platform. It is deployed on ZTE ZXR10 carrier routers/switches. Engineers can download the ZXR10-QOS-CAR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-QOS-CAR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 carrier routers/switches

Monitoring Examples

An administrator reviews this MIB's objects to confirm CAR (Committed Access Rate) traffic policing (ZXROS) is configured and operating as expected on a ZTE ZXR10 platform.

What Can Be Monitored

CAR (Committed Access Rate) traffic policing (ZXROS)

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION

From ZXR10-SMI

zxr10	OBJECT-IDENTITY
zxr10RosngMIB	OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
U32 zIfCarCbs	1.3.6.1.4.1.3902.3.6000.30.1.1.1.12	Unsigned32	read-only	Committed burst size. Mark: the data is based on the diffrent project
U32 zIfCarCir	1.3.6.1.4.1.3902.3.6000.30.1.1.1.11	Unsigned32	read-only	Committed information rate
INT zIfCarColorMode	1.3.6.1.4.1.3902.3.6000.30.1.1.1.23	INTEGER	read-only	Color mode type: blind : Color-Blind mode aware : Color-Aware mode
INT zIfCarDirection	1.3.6.1.4.1.3902.3.6000.30.1.1.1.2	INTEGER	read-only	Rate limit on direction
U32 zIfCarEbs	1.3.6.1.4.1.3902.3.6000.30.1.1.1.15	Unsigned32	read-only	Exceed burst size
zIfCarEntry	1.3.6.1.4.1.3902.3.6000.30.1.1.1		not-accessible	rate-limit on the interface
U32 zIfCarGreen8021pInOutFlag	1.3.6.1.4.1.3902.3.6000.30.1.1.1.27	Unsigned32	read-only	inner or outer flag. 0 is outer flag. 1 is inner and outer flag.
U32 zIfCarGreenActionFlag	1.3.6.1.4.1.3902.3.6000.30.1.1.1.16	Unsigned32	read-only	Action to packets that conform to the rate limit
U32 zIfCarGreenActionValue	1.3.6.1.4.1.3902.3.6000.30.1.1.1.17	Unsigned32	read-only	Action value
U32 zIfCarGreenActionValue2	1.3.6.1.4.1.3902.3.6000.30.1.1.1.24	Unsigned32	read-only	Action value
STR zIfCarInterfaceName	1.3.6.1.4.1.3902.3.6000.30.1.1.1.1	DisplayString	read-only	interface name
INT zIfCarMatchType1	1.3.6.1.4.1.3902.3.6000.30.1.1.1.4	INTEGER	read-only	match-type: localport Match local port unicast Match unicast, only for VPLS broadcast Match broadcast, only for VPLS unknown Match unknown, only for VPLS ipv4-access-list Match IPv4 access list ipv6-access-list Match IPv6 access list dscp MATCH DSCP mpls-exp Match MPLS-EXP precedence Match IP precedence inner-vlan Match inner VLAN ID inner-8021p Match inner 802.1p value multicast Match multicast, only for VPLS link-access-list Match link access list qos-group Match qos-group number unknown-unicast Match unknown unicast, only for VPLS unknown-multicast Match unknown multicast, only for VPLS
INT zIfCarMatchType2	1.3.6.1.4.1.3902.3.6000.30.1.1.1.8	INTEGER	read-only	match type: outer-8021p Match outer 802.1p value. outer-vlan Match outer VLAN ID.
U32 zIfCarMatchValue2Word32	1.3.6.1.4.1.3902.3.6000.30.1.1.1.10	Unsigned32	read-only	Match outer 802.1p value
STR zIfCarMatchValueRange	1.3.6.1.4.1.3902.3.6000.30.1.1.1.7	DisplayString	read-only	Match inner VLAN ID(max num:4;spacing mark:,)
STR zIfCarMatchValueRange2	1.3.6.1.4.1.3902.3.6000.30.1.1.1.9	DisplayString	read-only	Match outer VLAN ID(max num:4;spacing mark:,)
STR zIfCarMatchValueString	1.3.6.1.4.1.3902.3.6000.30.1.1.1.5	DisplayString	read-only	WORD IPv4/IPv6 access list string.
U32 zIfCarMatchValueWord32	1.3.6.1.4.1.3902.3.6000.30.1.1.1.6	Unsigned32	read-only	qos-group number DSCP value IP precedence value MPLS-EXP value Match inner 802.1p value
U32 zIfCarPbs	1.3.6.1.4.1.3902.3.6000.30.1.1.1.14	Unsigned32	read-only	Peak burst size. Mark: the data is based on the diffrent project
U32 zIfCarPir	1.3.6.1.4.1.3902.3.6000.30.1.1.1.13	Unsigned32	read-only	Peak information rate
INT zIfCarProtocol	1.3.6.1.4.1.3902.3.6000.30.1.1.1.3	INTEGER	read-only	Rate limit based on protocol
U32 zIfCarRed8021pInOutFlag	1.3.6.1.4.1.3902.3.6000.30.1.1.1.29	Unsigned32	read-only	inner or outer flag. 0 is outer flag. 1 is inner and outer flag.
U32 zIfCarRedActionFlag	1.3.6.1.4.1.3902.3.6000.30.1.1.1.20	Unsigned32	read-only	Action to packets that violate the rate limit
U32 zIfCarRedActionValue	1.3.6.1.4.1.3902.3.6000.30.1.1.1.21	Unsigned32	read-only	Action value.
U32 zIfCarRedActionValue2	1.3.6.1.4.1.3902.3.6000.30.1.1.1.26	Unsigned32	read-only	Action value.
U32 zIfCarStatShareFlg	1.3.6.1.4.1.3902.3.6000.30.1.1.1.22	Unsigned32	read-only	The flag of statistical-share. 0: Statistical-share is not configured 1: Statistical-share is configured
zIfCarTable	1.3.6.1.4.1.3902.3.6000.30.1.1		not-accessible	IF_CAR Table
U32 zIfCarYellow8021pInOutFlag	1.3.6.1.4.1.3902.3.6000.30.1.1.1.28	Unsigned32	read-only	inner or outer flag. 0 is outer flag. 1 is inner and outer flag.
U32 zIfCarYellowActionFlag	1.3.6.1.4.1.3902.3.6000.30.1.1.1.18	Unsigned32	read-only	Action to packets that exceed the rate limit
U32 zIfCarYellowActionValue	1.3.6.1.4.1.3902.3.6000.30.1.1.1.19	Unsigned32	read-only	Action value
U32 zIfCarYellowActionValue2	1.3.6.1.4.1.3902.3.6000.30.1.1.1.25	Unsigned32	read-only	Action value
zxr10QosCarMIB	1.3.6.1.4.1.3902.3.6000.30.1			The MIB module to describe the QoS Car protocol.
zxr10QosMIBObjects	1.3.6.1.4.1.3902.3.6000.30

RFC description

Configures Quality of Service committed access rate (CAR) traffic shaping and rate-limiting policies per interface.

Start monitoring ZTE ZXR10 carrier routers/switches (Committed-Access-Rate policing CIR/PIR/color-action config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-QOS-CAR-MIB

What Is ZXR10-QOS-CAR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description