ZXR10-HAGP-MIB

All MIBs › ZXR10-HAGP-MIB

Organization: ZTE Corporation.

Last Updated: 2018-06-26

Category: Cluster and High Availability, ZTE ZXR10 Routing and Switching

Description: Covers HAGP (High Availability Gateway Protocol) on ZTE ZXR10 routers, including configuration and failover status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-HAGP-MIB?

ZXR10-HAGP-MIB manages the Hybrid Access Gateway Protocol (HAGP) on ZTE ZXR10 routers, a feature used to bond or aggregate LTE and DSL access links for a single subscriber to increase throughput and provide failover. It exposes rich subscriber-session statistics including active customer counts, bonded/bounding customer counts, congestion counts, authentication success/failure counts, and session-duration distribution buckets (shorter than 5 minutes, 5 minutes to 1 hour, 1 hour to 1 day) split by LTE and DSL access type. Its monitoring value is strongly operational/service-health focused: tracking authentication failure counts and congested-customer counts reveals subscriber-facing problems, while session-duration buckets reveal whether sessions are churning abnormally (many very short sessions indicating instability) versus running long and stable. It implements a ZTE-specific hybrid access architecture conceptually related to IETF hybrid access / MP-TCP bonding work, though the MIB itself is proprietary. It is typically deployed on ZTE ZXR10 routers acting as hybrid access gateways in broadband networks combining fixed DSL and mobile LTE for bandwidth bonding, and the ZXR10-HAGP-MIB MIB defines the subscriber-session objects used to build such dashboards.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-HAGP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 router (hybrid access gateway)

Monitoring Examples

An operator would poll zxr10HagpLteActiveCustomerNum and zxr10HagpDslActiveCustomerNum to track how many subscribers currently have active bonded sessions, and check zxr10HagpLteAuthFailNum/zxr10HagpDslAuthFailNum for spikes indicating an authentication-infrastructure problem. Reviewing zxr10HagpSessionNumShorterThan5m against zxr10HagpSessionNum1hTo1d would reveal abnormal session churn -- a high proportion of sub-5-minute sessions would suggest link instability on the LTE or DSL leg of the bond, while zxr10HagpLteCongestCustomerNum/zxr10HagpDslCongestCustomerNum would flag capacity congestion affecting bonded customers.

What Can Be Monitored

active bonded customer counts (LTE/DSL)
congested customer counts
authentication success/failure counts
session duration distribution
bonding/bundling customer counts

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using zxr10HagpCustomerLteULVolume OID:

Select a ZTE router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxr10HagpCustomerLteULVolume into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the data volume of LTE uplink. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in bytes), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
zte	1.3.6.1.4.1.3902
zxr10	1.3.6.1.4.1.3902.3
U32 zxr10HagpBoundingCustomerNum	1.3.6.1.4.1.3902.3.6000.605.1.3	Unsigned32	read-only	Number of customers working in bounding mode.
U32 zxr10HagpCustomerDslBandwidth	1.3.6.1.4.1.3902.3.6000.605.2.1.1.24	Unsigned32	read-only	Available downstream DSL bandwidth.
C64 zxr10HagpCustomerDslDLThrougput	1.3.6.1.4.1.3902.3.6000.605.2.1.1.9	Counter64	read-only	Data througput of DSL downlink.
C64 zxr10HagpCustomerDslDLVolume	1.3.6.1.4.1.3902.3.6000.605.2.1.1.5	Counter64	read-only	Data volume of DSL downlink.
IP zxr10HagpCustomerDslIp	1.3.6.1.4.1.3902.3.6000.605.2.1.1.18	InetAddress	read-only	DSL IP address.
IPt zxr10HagpCustomerDslIpType	1.3.6.1.4.1.3902.3.6000.605.2.1.1.17	InetAddressType	read-only	DSL IP address type.
INT zxr10HagpCustomerDslMode	1.3.6.1.4.1.3902.3.6000.605.2.1.1.26	INTEGER	read-only	DSL mode.
INT zxr10HagpCustomerDslState	1.3.6.1.4.1.3902.3.6000.605.2.1.1.14	INTEGER	read-only	DSL link state.
TIK zxr10HagpCustomerDslTime	1.3.6.1.4.1.3902.3.6000.605.2.1.1.11	TimeTicks	read-only	DSL session time.
C64 zxr10HagpCustomerDslULThrougput	1.3.6.1.4.1.3902.3.6000.605.2.1.1.7	Counter64	read-only	Data througput of DSL uplink.
C64 zxr10HagpCustomerDslULVolume	1.3.6.1.4.1.3902.3.6000.605.2.1.1.3	Counter64	read-only	Data volume of DSL uplink.
zxr10HagpCustomerEntry	1.3.6.1.4.1.3902.3.6000.605.2.1.1		not-accessible	The entry of HAGP customer detail information.
U32 zxr10HagpCustomerLteBandwidth	1.3.6.1.4.1.3902.3.6000.605.2.1.1.25	Unsigned32	read-only	Available downstream LTE bandwidth.
C64 zxr10HagpCustomerLteDLThrougput	1.3.6.1.4.1.3902.3.6000.605.2.1.1.8	Counter64	read-only	Data througput of LTE downlink.
C64 zxr10HagpCustomerLteDLVolume	1.3.6.1.4.1.3902.3.6000.605.2.1.1.4	Counter64	read-only	Data volume of LTE downlink.
TIK zxr10HagpCustomerLteDslBondTime	1.3.6.1.4.1.3902.3.6000.605.2.1.1.12	TimeTicks	read-only	DSL and LTE bonding session time.
IP zxr10HagpCustomerLteIp	1.3.6.1.4.1.3902.3.6000.605.2.1.1.16	InetAddress	read-only	LTE IP address.
IPt zxr10HagpCustomerLteIpType	1.3.6.1.4.1.3902.3.6000.605.2.1.1.15	InetAddressType	read-only	LTE IP address type.
INT zxr10HagpCustomerLteState	1.3.6.1.4.1.3902.3.6000.605.2.1.1.13	INTEGER	read-only	LTE link state.
TIK zxr10HagpCustomerLteTime	1.3.6.1.4.1.3902.3.6000.605.2.1.1.10	TimeTicks	read-only	LTE session time.
C64 zxr10HagpCustomerLteULThrougput	1.3.6.1.4.1.3902.3.6000.605.2.1.1.6	Counter64	read-only	Data througput of LTE uplink.
C64 zxr10HagpCustomerLteULVolumeEx	1.3.6.1.4.1.3902.3.6000.605.2.1.1.2	Counter64	read-only	Data volume of LTE uplink.
zxr10HagpCustomerObjects	1.3.6.1.4.1.3902.3.6000.605.2
STR zxr10HagpCustomerProfileDown	1.3.6.1.4.1.3902.3.6000.605.2.1.1.22	DisplayString	read-only	Downstream profile name.
STR zxr10HagpCustomerProfileUp	1.3.6.1.4.1.3902.3.6000.605.2.1.1.21	DisplayString	read-only	Upstream profile name.
IP zxr10HagpCustomerPublicIp	1.3.6.1.4.1.3902.3.6000.605.2.1.1.20	InetAddress	read-only	Public IP address.
IPt zxr10HagpCustomerPublicIpType	1.3.6.1.4.1.3902.3.6000.605.2.1.1.19	InetAddressType	read-only	Public IP address type.
U32 zxr10HagpCustomerSessionId	1.3.6.1.4.1.3902.3.6000.605.2.1.1.27	Unsigned32	read-only	Session ID.
zxr10HagpCustomerTable	1.3.6.1.4.1.3902.3.6000.605.2.1		not-accessible	The table of HAGP customer.
U32 zxr10HagpCustomerTotalBandwidth	1.3.6.1.4.1.3902.3.6000.605.2.1.1.23	Unsigned32	read-only	Available downstream total bandwidth.
STR zxr10HagpCustomerUserName	1.3.6.1.4.1.3902.3.6000.605.2.1.1.1	DisplayString	not-accessible	User name of HAGP customer.
U32 zxr10HagpDslActiveCustomerNum	1.3.6.1.4.1.3902.3.6000.605.1.2	Unsigned32	read-only	Number of customers with DSL tunnel active.
U32 zxr10HagpDslAuthFailNum	1.3.6.1.4.1.3902.3.6000.605.1.9	Unsigned32	read-only	Number of DSL tunnels authenticate failed.
U32 zxr10HagpDslAuthSuccessNum	1.3.6.1.4.1.3902.3.6000.605.1.7	Unsigned32	read-only	Number of DSL tunnels authenticate successfully.
U32 zxr10HagpDslCongestCustomerNum	1.3.6.1.4.1.3902.3.6000.605.1.5	Unsigned32	read-only	Number of customer with DSL congestion problems.
zxr10HagpGlobalObjects	1.3.6.1.4.1.3902.3.6000.605.1
U32 zxr10HagpLteActiveCustomerNum	1.3.6.1.4.1.3902.3.6000.605.1.1	Unsigned32	read-only	Number of customers with LTE tunnel active.
U32 zxr10HagpLteAuthFailNum	1.3.6.1.4.1.3902.3.6000.605.1.8	Unsigned32	read-only	Number of LTE tunnels authenticate failed.
U32 zxr10HagpLteAuthSuccessNum	1.3.6.1.4.1.3902.3.6000.605.1.6	Unsigned32	read-only	Number of LTE tunnels authenticate successfully.
U32 zxr10HagpLteCongestCustomerNum	1.3.6.1.4.1.3902.3.6000.605.1.4	Unsigned32	read-only	Number of customer with LTE congestion problems.
zxr10HAGPMIB	1.3.6.1.4.1.3902.3.6000.605			This MIB describes objects used for managing Hybrid Access Gateway Protocol (HAGP).
U32 zxr10HagpSessionNum1hTo1d	1.3.6.1.4.1.3902.3.6000.605.1.12	Unsigned32	read-only	Number of hybrid sessions with duration 1h-1d.
U32 zxr10HagpSessionNum5mTo1h	1.3.6.1.4.1.3902.3.6000.605.1.11	Unsigned32	read-only	Number of hybrid sessions with duration 5m-1h.
U32 zxr10HagpSessionNumLongerThan1d	1.3.6.1.4.1.3902.3.6000.605.1.13	Unsigned32	read-only	Number of hybrid sessions with duration longer than 1d.
U32 zxr10HagpSessionNumShorterThan5m	1.3.6.1.4.1.3902.3.6000.605.1.10	Unsigned32	read-only	Number of hybrid sessions with duration shorter than 5m.
zxr10RosngMIB	1.3.6.1.4.1.3902.3.6000

RFC description

Manages ZTE ZXR10 router HAGP (High Availability Gateway Protocol) configuration and failover status.

Start monitoring ZTE routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-HAGP-MIB