ZXR10-SYSTEM-CONFIG-MIB

All MIBs › ZXR10-SYSTEM-CONFIG-MIB

Organization: ZTE Corporation

Last Updated: 2019--0-2-

Category: ZTE ZXR10 System Management

Description: Defines ZTE ZXR10 system-level configuration objects including hostname, management interfaces, and startup config.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-SYSTEM-CONFIG-MIB?

ZXR10-SYSTEM-CONFIG-MIB is a ZTE Corporation proprietary MIB (ZXR10/ZXROS platform family) implementing chassis-level system identification and startup configuration (ZXR10 T8000) on ZTE ZXR10 carrier routers/switches. Its objects cover system/serial ID, boot and ZXROSng software version and build time, backup-version equivalents, startup location/package name/size/time, config-file location/name, run mode, fabric length, MAC-address count, network-management version, auto-plug-card enable, health status, reload/redundancy-switch actions, and a synchronization-status table. As a configuration/status MIB it lets an administrator audit and monitor chassis-level system identification and startup configuration (ZXR10 T8000) on a ZXR10 platform. It is deployed on ZTE ZXR10 carrier routers/switches. Engineers can download the ZXR10-SYSTEM-CONFIG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-SYSTEM-CONFIG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 carrier routers/switches

Monitoring Examples

An administrator reviews this MIB's objects to confirm chassis-level system identification and startup configuration (ZXR10 T8000) is configured and operating as expected on a ZTE ZXR10 platform.

What Can Be Monitored

chassis-level system identification and startup configuration (ZXR10 T8000)

Imported Objects

From SNMPv2-SMI

Gauge32
Integer32
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
TimeTicks
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
zte	1.3.6.1.4.1.3902			ZXR10 T8000 ZXR10SYSTEMCONFIG-MIB
zxr10	1.3.6.1.4.1.3902.3
zxr10RosngMIB	1.3.6.1.4.1.3902.3.6000
zxr10SystemConfigMIB	1.3.6.1.4.1.3902.3.6000.1			ZXR10 T8000 ZXR10SYSTEMCONFIG-MIB
zxr10systemconfig	1.3.6.1.4.1.3902.3.6000.1.1
OID zxr10SystemID	1.3.6.1.4.1.3902.3.6000.1.1.1	OBJECT IDENTIFIER	read-only	An integer description of the zxr10SystemID.
STR zxr10SystemserialNo	1.3.6.1.4.1.3902.3.6000.1.1.2	DisplayString	read-only	the serial no of the current system.
STR zxr10SystemBootVersion	1.3.6.1.4.1.3902.3.6000.1.1.3	DisplayString	read-only	the boot version no of the current system.
STR zxr10SystemVersion	1.3.6.1.4.1.3902.3.6000.1.1.4	DisplayString	read-only	the version no of the current system.
STR zxr10ROSngSystemVersion	1.3.6.1.4.1.3902.3.6000.1.1.5	DisplayString	read-only	the ROSng no of the current system.
STR zxr10SystemBuildTime	1.3.6.1.4.1.3902.3.6000.1.1.6	DisplayString	read-only	the build time of the current system.
STR zxr10BackupSystemVersion	1.3.6.1.4.1.3902.3.6000.1.1.7	DisplayString	read-only	the version no of the backup system.
STR zxr10BackupROSngSystemVersion	1.3.6.1.4.1.3902.3.6000.1.1.8	DisplayString	read-only	the ROSng no of the backup system.
STR zxr10BackupSystemBuildTime	1.3.6.1.4.1.3902.3.6000.1.1.9	DisplayString	read-only	the build time of the backup system.
STR zxr10SystemStartupLocation	1.3.6.1.4.1.3902.3.6000.1.1.10	DisplayString	read-only	The start up location of the current system.
STR zxr10SystemStartupPackageName	1.3.6.1.4.1.3902.3.6000.1.1.11	DisplayString	read-only	The package name of the current system.
G32 zxr10SystemStartupPackageSize	1.3.6.1.4.1.3902.3.6000.1.1.12	Gauge32	read-only	The package size of the current system.
TIK zxr10SystemStartupTime	1.3.6.1.4.1.3902.3.6000.1.1.13	TimeTicks	read-only	The start up time of the current system.
STR zxr10SystemConfigFileLocation	1.3.6.1.4.1.3902.3.6000.1.1.14	DisplayString	read-only	The location of the config file of the current system.
STR zxr10SystemConfigFileName	1.3.6.1.4.1.3902.3.6000.1.1.15	DisplayString	read-only	The name of the config file of the current system.
INT zxr10SystemRunMode	1.3.6.1.4.1.3902.3.6000.1.1.16	INTEGER	read-only	The run mode of the current system.
INT zxr10SfuFabricLength	1.3.6.1.4.1.3902.3.6000.1.1.17	INTEGER	read-only	The sfu fabric length of the current system.
INT zxr10SystemMacNum	1.3.6.1.4.1.3902.3.6000.1.1.18	INTEGER	read-only	The mac num of the base mac.
STR zxr10NetworkManagementVersion	1.3.6.1.4.1.3902.3.6000.1.1.19	DisplayString	read-only	The network management version of the current system.
INT zxr10SystemAutoPlugCardEn	1.3.6.1.4.1.3902.3.6000.1.1.20	INTEGER	read-write	Enables and disables the automatic plugging card.
INT zxr10SystemHealthStatus	1.3.6.1.4.1.3902.3.6000.1.1.21	INTEGER	read-only	The health status of the current system.
zxr10SystemOperation	1.3.6.1.4.1.3902.3.6000.1.2
INT zxr10ReloadSystem	1.3.6.1.4.1.3902.3.6000.1.2.1	INTEGER	read-write	Reload system.
INT zxr10RedundancySwitch	1.3.6.1.4.1.3902.3.6000.1.2.2	INTEGER	read-write	Redundancy switch between the master and slave system controller.
zxr10SystemSyncObjects	1.3.6.1.4.1.3902.3.6000.1.3
zxr10SystemSynchronizationTable	1.3.6.1.4.1.3902.3.6000.1.3.2		not-accessible	The system synchronization table.
zxr10SystemSynchronizationEntry	1.3.6.1.4.1.3902.3.6000.1.3.2.1		not-accessible	The system synchronization entry.
INT zxr10SystemSyncModuleName	1.3.6.1.4.1.3902.3.6000.1.3.2.1.1	INTEGER	not-accessible	The name of the module.
INT zxr10SystemSyncLeName	1.3.6.1.4.1.3902.3.6000.1.3.2.1.2	INTEGER	not-accessible	The name of the logic entry. The logic entry name of database and fileSystem is 'invalid'.
STR zxr10SystemSyncLeLocation	1.3.6.1.4.1.3902.3.6000.1.3.2.1.3	DisplayString	read-only	The location of the logic entry
INT zxr10SystemSyncType	1.3.6.1.4.1.3902.3.6000.1.3.2.1.4	INTEGER	read-only	The type of synchronization. The synchronization type of database and fileSystem is 'invalid'.
INT zxr10SystemSyncStatus	1.3.6.1.4.1.3902.3.6000.1.3.2.1.5	INTEGER	read-only	The status of synchronization.

RFC description

ZTE ZXR10 T8000 router system configuration including health status, redundancy, reload operations, and run mode management.

Start monitoring ZTE ZXR10 carrier routers/switches (chassis system-ID/boot-version/startup-config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-SYSTEM-CONFIG-MIB

What Is ZXR10-SYSTEM-CONFIG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description