ZXR10-PTP-MIB

All MIBs › ZXR10-PTP-MIB

Organization: ZTE Corporation

Last Updated: 2015-01-28

Category: ZTE ZXR10 System Management

Description: Manages ZTE ZXR10 Precision Time Protocol (IEEE 1588) clock configuration, port state, and synchronization status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-PTP-MIB?

ZXR10-PTP-MIB is a ZTE-proprietary SNMP module for the ZXR10 series of carrier/enterprise switches and routers, covering IEEE 1588 Precision Time Protocol (PTP) clock synchronization. It provides objects for configuring PTP clock instances and ports (e.g., master/slave/boundary clock roles) and for reporting the operational status of PTP synchronization on the device. Its central monitoring value is timing/software status: administrators can check whether a device's PTP clock is locked/synchronized to its reference and the current per-port PTP state (master, slave, passive, faulty), which reveal whether time-sensitive services relying on the ZXR10 are receiving accurate clock reference. It is functionally grounded in the IEEE 1588-2008 PTP standard even though implemented as a ZTE enterprise MIB rather than a formal IETF PTP MIB. It is deployed in telecom and mobile-backhaul networks where ZXR10 switches/routers distribute precise timing to base stations or other clock-dependent equipment. Engineers can download the ZXR10-PTP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-PTP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 series switches/routers

Monitoring Examples

No concrete object names were available in the extracted source for this module, so a specific polling example cannot be given with certainty; based on its stated purpose, an operator would typically poll per-port PTP clock state (master/slave/passive) and synchronization/lock status to detect a port that has fallen out of sync or a clock that has failed over to a lower-quality reference.

What Can Be Monitored

PTP port clock state (master/slave/passive)
clock synchronization/lock status
PTP clock configuration

Imported Objects

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
RowStatus

From ZXR10-SMI

zxr10	OBJECT-IDENTITY
zxr10protocol	OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zte	1.3.6.1.4.1.3902
zxr10	1.3.6.1.4.1.3902.3
zxr10protocol	1.3.6.1.4.1.3902.3.101
zxr10ptp	1.3.6.1.4.1.3902.3.101.10			The MIB module to describe the PTP protocol
zxr10ptpConfig	1.3.6.1.4.1.3902.3.101.10.1
INT zxr10PTPConfigStateAlg	1.3.6.1.4.1.3902.3.101.10.1.1	INTEGER	read-write	The PTP port state mode.
INT zxr10PTPConfigClkMode	1.3.6.1.4.1.3902.3.101.10.1.2	INTEGER	read-write	The ptp clock type.
INT zxr10PTPConfigTSC	1.3.6.1.4.1.3902.3.101.10.1.3	INTEGER	read-write	The two-step attribution is true or not, t8000\M6k only support one-step.
INT zxr10PTPConfigSO	1.3.6.1.4.1.3902.3.101.10.1.4	INTEGER	read-write	The slave_only attribution is true or not.
I32 zxr10PTPConfigPriority1	1.3.6.1.4.1.3902.3.101.10.1.5	Integer32	read-write	The ptp priority1.
I32 zxr10PTPConfigPriority2	1.3.6.1.4.1.3902.3.101.10.1.6	Integer32	read-write	The ptp priority2.
INT zxr10PTPConfigTimeSource	1.3.6.1.4.1.3902.3.101.10.1.7	INTEGER	read-write	The ptp time source.
I32 zxr10PTPConfigClockClass	1.3.6.1.4.1.3902.3.101.10.1.8	Integer32	read-write	The ptp clock class.
I32 zxr10PTPConfigClockAccuracy	1.3.6.1.4.1.3902.3.101.10.1.9	Integer32	read-write	The ptp clock accuracy.
INT zxr10PTPConfigInit	1.3.6.1.4.1.3902.3.101.10.1.10	INTEGER	read-write	Initialize all ptp information.
INT zxr10PTPConfigGlobalEnable	1.3.6.1.4.1.3902.3.101.10.1.11	INTEGER	read-write	PTP global enable is true or not.
INT zxr10PTPNetProtocol	1.3.6.1.4.1.3902.3.101.10.1.12	INTEGER	read-write	The global net protocol, some projects may not support.
INT zxr10PTPConfigTransmitMode	1.3.6.1.4.1.3902.3.101.10.1.13	INTEGER	read-only	The transmit mode.
INT zxr10PTPConfigClockClassRule	1.3.6.1.4.1.3902.3.101.10.1.14	INTEGER	read-write	The clock class rule.
I32 zxr10PTPConfigVlanPriority	1.3.6.1.4.1.3902.3.101.10.1.15	Integer32	read-only	Vlan priority.
STR zxr10PTPConfigSourceName	1.3.6.1.4.1.3902.3.101.10.1.16	DisplayString	read-only	The PTP source interface name.
INT zxr10PTPConfigIpListProperty	1.3.6.1.4.1.3902.3.101.10.1.17	INTEGER	read-only	The ip list property,use for acl control.
zxr10ptpDomain	1.3.6.1.4.1.3902.3.101.10.2
INT zxr10PTPConfigDDM	1.3.6.1.4.1.3902.3.101.10.2.1	INTEGER	read-write	The ptp domain delay mechanism.
I32 zxr10PTPConfigDomainNum	1.3.6.1.4.1.3902.3.101.10.2.2	Integer32	read-write	The ptp domain number.
I32 zxr10PTPConfigAnnounceInterval	1.3.6.1.4.1.3902.3.101.10.2.3	Integer32	read-write	The ptp announce interval,the range is -1..4 for t8000\M6k and 89;-4..4 for upp3081 and 15k.
I32 zxr10PTPConfigAnnounceTimeout	1.3.6.1.4.1.3902.3.101.10.2.4	Integer32	read-write	The ptp announce timeout.
I32 zxr10PTPConfigSyncInterval	1.3.6.1.4.1.3902.3.101.10.2.5	Integer32	read-write	The ptp sync interval.for t8000\M6k the range is -7..1, for 89 is -6..1,for 15k is -7..1,upp3081 does not support.
I32 zxr10PTPConfigDelayReqInterval	1.3.6.1.4.1.3902.3.101.10.2.6	Integer32	read-write	The ptp delay req interval,for t8000\M6k and 15k the range is -7..1,for 89 the range is -5..5,upp3081 does not support.
I32 zxr10PTPConfigPDelayReqInterval	1.3.6.1.4.1.3902.3.101.10.2.7	Integer32	read-write	The ptp pdelay req interval, for t8000\M6k and 89 the range is 0..5, for 15k the range is -4..5,upp3081 does not support.
zxr10ptpShow	1.3.6.1.4.1.3902.3.101.10.3
STR zxr10PTPShowOffset	1.3.6.1.4.1.3902.3.101.10.3.1	DisplayString	read-only	The ptp offset of the slave port, only valid for 89 and upp3081.
STR zxr10PTPShowDelay	1.3.6.1.4.1.3902.3.101.10.3.2	DisplayString	read-only	The ptp delay of the slave port.
I32 zxr10PTPShowStepsFromGM	1.3.6.1.4.1.3902.3.101.10.3.3	Integer32	read-only	The steps removed from grandmaster.
STR zxr10PTPShowNativeClockId	1.3.6.1.4.1.3902.3.101.10.3.4	DisplayString	read-only	Native clock id.
STR zxr10PTPShowParentPortId	1.3.6.1.4.1.3902.3.101.10.3.5	DisplayString	read-only	The parent port id.
STR zxr10PTPShowGMClockId	1.3.6.1.4.1.3902.3.101.10.3.6	DisplayString	read-only	The grandmaster clock id.
STR zxr10PTPShowSlavePort	1.3.6.1.4.1.3902.3.101.10.3.7	DisplayString	read-only	The interface name of the slave port.
zxr10ptpIntfConfTable	1.3.6.1.4.1.3902.3.101.10.4		not-accessible	A table containing PTP port configure information.
zxr10ptpIntfConfEntry	1.3.6.1.4.1.3902.3.101.10.4.1		not-accessible	Information of PTP port.
I32 zxr10PTPPortIndex	1.3.6.1.4.1.3902.3.101.10.4.1.1	Integer32	not-accessible	Object which specifies a unique entry in the Zxr10PtpIntfConfEntry.
STR zxr10PTPPortConfigName	1.3.6.1.4.1.3902.3.101.10.4.1.2	DisplayString	not-accessible	The PTP port name.
INT zxr10PTPPortConfigEnable	1.3.6.1.4.1.3902.3.101.10.4.1.4	INTEGER	read-only	Enable or disable a ptp port.
INT zxr10PTPPortConfigState	1.3.6.1.4.1.3902.3.101.10.4.1.5	INTEGER	read-only	The ptp port state configured by manual, masterslave state only t8000\M6k support.
I32 zxr10PTPPortConfigSyncInterval	1.3.6.1.4.1.3902.3.101.10.4.1.6	Integer32	read-only	The ptp sync interval,only upp3081 support.
I32 zxr10PTPPortConfigDelayReqInterval	1.3.6.1.4.1.3902.3.101.10.4.1.7	Integer32	read-only	The ptp delay req interval,only upp3081 support.
INT zxr10PTPPortConfigMultiDomainEnable	1.3.6.1.4.1.3902.3.101.10.4.1.8	INTEGER	read-only	The ptp port is multi domain port or not, only upp3081 support.
INT zxr10PTPPortConfigDelayMech	1.3.6.1.4.1.3902.3.101.10.4.1.9	INTEGER	read-only	The delay mechanism of the ptp port,only upp3081 support.
INT zxr10PTPPortPacketMechanism	1.3.6.1.4.1.3902.3.101.10.4.1.11	INTEGER	read-only	The port packet mechanism.
INT zxr10PTPShowPortState	1.3.6.1.4.1.3902.3.101.10.4.1.12	INTEGER	read-only	The port state.
INT zxr10PTPPortConfigTransEnable	1.3.6.1.4.1.3902.3.101.10.4.1.13	INTEGER	read-only	Enable or disable the trans mode of a ptp port.
ROW zxr10PTPPortConfigRowStatus	1.3.6.1.4.1.3902.3.101.10.4.1.100	RowStatus	read-create	Create or delete ptp port.
zxr10ptpPortCfgTable	1.3.6.1.4.1.3902.3.101.10.5		not-accessible	A table containing PTP port configure information.
zxr10ptpPortCfgEntry	1.3.6.1.4.1.3902.3.101.10.5.1		not-accessible	Information of PTP port.
STR zxr10ptpPortCfgIfName	1.3.6.1.4.1.3902.3.101.10.5.1.1	DisplayString	not-accessible	The PTP port name.
INT zxr10ptpPortCfgPortType	1.3.6.1.4.1.3902.3.101.10.5.1.2	INTEGER	not-accessible	The PTP port type,1 means combined-oc, 2 means general port.
I32 zxr10ptpPortCfgPortNum	1.3.6.1.4.1.3902.3.101.10.5.1.3	Integer32	read-create	The ptp port number,the value must be configured when create a port,1 means combined-oc.
INT zxr10ptpPortCfgEnable	1.3.6.1.4.1.3902.3.101.10.5.1.4	INTEGER	read-create	Enable or disable a ptp port.
INT zxr10ptpPortCfgState	1.3.6.1.4.1.3902.3.101.10.5.1.5	INTEGER	read-create	The ptp port state configured by manual, masterslave state only t8000 support.
I32 zxr10ptpPortCfgSyncInterval	1.3.6.1.4.1.3902.3.101.10.5.1.6	Integer32	read-create	The ptp sync interval,for upp3081 the range is -8..1, for 15k,the range is -4..1.
I32 zxr10ptpPortCfgDelayReqInterval	1.3.6.1.4.1.3902.3.101.10.5.1.7	Integer32	read-create	The ptp delay req interval,for upp3081 the range is -5..5, for 15k,the range is -4..5.
INT zxr10ptpPortCfgMultiDomainEnable	1.3.6.1.4.1.3902.3.101.10.5.1.8	INTEGER	read-create	The ptp port is multi domain port or not, only upp3081 support.
INT zxr10ptpPortCfgDelayMech	1.3.6.1.4.1.3902.3.101.10.5.1.9	INTEGER	read-create	The delay mechanism of the ptp port,only upp3081 support.
INT zxr10ptpPortCfgNetProtocol	1.3.6.1.4.1.3902.3.101.10.5.1.10	INTEGER	read-create	The port net protocol,only upp3081 and 15k support.
INT zxr10ptpPortCfgTransmitMode	1.3.6.1.4.1.3902.3.101.10.5.1.11	INTEGER	read-create	The port packet transmit mode,only 15k support.
U32 zxr10ptpPortCfgUnSymmetry	1.3.6.1.4.1.3902.3.101.10.5.1.12	Unsigned32	read-create	The unsymmetrical offset(ns),consider the effect of the zxr10PTPPortUnSign node.t8000 not support.
INT zxr10ptpPortCfgUnSign	1.3.6.1.4.1.3902.3.101.10.5.1.13	INTEGER	read-create	The unsymmetrical offset sign,consider the effect of the zxr10PTPPortUnSymmetry node.t8000 not support.
I32 zxr10ptpPortCfgVlanId	1.3.6.1.4.1.3902.3.101.10.5.1.14	Integer32	read-create	Vlan id, only valid for 15k,other projects maybe not support
STR zxr10ptpPortCfgSourceName	1.3.6.1.4.1.3902.3.101.10.5.1.15	DisplayString	read-create	The PTP source interface name.
I32 zxr10ptpPortCfgPDelayReqInterval	1.3.6.1.4.1.3902.3.101.10.5.1.16	Integer32	read-create	The ptp pdelay req interval,only upp3081 and 15k support.
INT zxr10ptpPortCfgPktStatistic	1.3.6.1.4.1.3902.3.101.10.5.1.17	INTEGER	read-create	packet statistic switch.
INT zxr10ptpPortCfgWorkMode	1.3.6.1.4.1.3902.3.101.10.5.1.18	INTEGER	read-create	The ptp port work mode.
INT zxr10ptpPortCfgVlanPriority	1.3.6.1.4.1.3902.3.101.10.5.1.19	INTEGER	read-create	Vlan priority
INT zxr10ptpPortCfgUniNegoDura	1.3.6.1.4.1.3902.3.101.10.5.1.20	INTEGER	read-create	Unicast negotiation duration of the port.
ROW zxr10ptpPortCfgRowStatus	1.3.6.1.4.1.3902.3.101.10.5.1.100	RowStatus	read-create	Create or delete ptp port,must config port number.
zxr10ptpEthPortTable	1.3.6.1.4.1.3902.3.101.10.6		not-accessible	A table containing PTP port configure information.
zxr10ptpEthPortEntry	1.3.6.1.4.1.3902.3.101.10.6.1		not-accessible	Information about the PTP ethernet port.
STR zxr10PTPEthPortName	1.3.6.1.4.1.3902.3.101.10.6.1.1	DisplayString	not-accessible	The PTP ethernet port name.
INT zxr10PTPEthPortConfigEnable	1.3.6.1.4.1.3902.3.101.10.6.1.2	INTEGER	read-create	Enable or disable a ptp ethernet port.
U32 zxr10PTPEthPortUnSymmetry	1.3.6.1.4.1.3902.3.101.10.6.1.3	Unsigned32	read-create	The unsymmetrical offset.
INT zxr10PTPEthPortUnSign	1.3.6.1.4.1.3902.3.101.10.6.1.4	INTEGER	read-create	The unsymmetrical offset sign.
ROW zxr10PTPEthPortRowStatus	1.3.6.1.4.1.3902.3.101.10.6.1.100	RowStatus	read-create	Create or delete a ptp ethernet port.
zxr10ptpDstIpConfTable	1.3.6.1.4.1.3902.3.101.10.7		not-accessible	A table containing PTP port dest ip configure information.
zxr10ptpDstIpConfEntry	1.3.6.1.4.1.3902.3.101.10.7.1		not-accessible	Information about the PTP interface destination IP.
STR zxr10PTPDestIpPortName	1.3.6.1.4.1.3902.3.101.10.7.1.1	DisplayString	not-accessible	The PTP port name.
INT zxr10PTPDestIpPortType	1.3.6.1.4.1.3902.3.101.10.7.1.2	INTEGER	not-accessible	The PTP port type,1 means combined-oc,2 means oc,bc,tc.
IP zxr10PTPDestIpIndex	1.3.6.1.4.1.3902.3.101.10.7.1.3	IpAddress	not-accessible	The port destination IP address.
INT zxr10PTPDestIpPortNum	1.3.6.1.4.1.3902.3.101.10.7.1.4	INTEGER	read-only	The PTP port number,1 means combined-oc.
INT zxr10PTPDestIpAlternatePriority1	1.3.6.1.4.1.3902.3.101.10.7.1.5	INTEGER	read-create	Set priority1 of accept master IP.
INT zxr10PTPDestIpPortMode	1.3.6.1.4.1.3902.3.101.10.7.1.6	INTEGER	read-create	Set the port mode of PTP.
ROW zxr10PTPDestIpRowStatus	1.3.6.1.4.1.3902.3.101.10.7.1.100	RowStatus	read-create	Create or delete ptp accept master IP.
zxr10ptpIpListConfTable	1.3.6.1.4.1.3902.3.101.10.8		not-accessible	A table containing PTP ACL IP information.
zxr10ptpIpListConfEntry	1.3.6.1.4.1.3902.3.101.10.8.1		not-accessible	Information about PTP ACL IP configure.
IP zxr10PTPIpListConfig	1.3.6.1.4.1.3902.3.101.10.8.1.1	IpAddress	not-accessible	The Acl IP address.
ROW zxr10PTPIpListRowStatus	1.3.6.1.4.1.3902.3.101.10.8.1.100	RowStatus	read-create	Create or delete acl IP.
zxr10ptpTimeSrcCfgTable	1.3.6.1.4.1.3902.3.101.10.9		not-accessible	A table containing PTP time source information.
zxr10ptpTimeSrcCfgEntry	1.3.6.1.4.1.3902.3.101.10.9.1		not-accessible	Information about PTP time source configure of PTP.
STR zxr10PTPTimeSrcCfgIfname	1.3.6.1.4.1.3902.3.101.10.9.1.1	DisplayString	not-accessible	The time source ifname, eg: gps or bits.
I32 zxr10PTPTimeSrcCfgPri1	1.3.6.1.4.1.3902.3.101.10.9.1.2	Integer32	read-only	The time source priority1.
I32 zxr10PTPTimeSrcCfgPri2	1.3.6.1.4.1.3902.3.101.10.9.1.3	Integer32	read-only	The time source priority2.
ROW zxr10PTPTimeSrcCfgRowStatus	1.3.6.1.4.1.3902.3.101.10.9.1.100	RowStatus	read-create	Create or delete time source.
zxr10ptpInit	1.3.6.1.4.1.3902.3.101.10.10
INT zxr10PTPInitConfig	1.3.6.1.4.1.3902.3.101.10.10.1	INTEGER	read-write	Initial all attribution.
zxr10ptpPortShowTable	1.3.6.1.4.1.3902.3.101.10.11		not-accessible	A table containing PTP port state information.
zxr10ptpPortShowEntry	1.3.6.1.4.1.3902.3.101.10.11.1		not-accessible	Information of PTP port.
STR zxr10ptpPortShowIfName	1.3.6.1.4.1.3902.3.101.10.11.1.1	DisplayString	not-accessible	The PTP port name.
INT zxr10ptpPortShowPortType	1.3.6.1.4.1.3902.3.101.10.11.1.2	INTEGER	not-accessible	The PTP port type,1 means combined-oc,0 means not.
I32 zxr10ptpPortShowPortNum	1.3.6.1.4.1.3902.3.101.10.11.1.3	Integer32	read-only	The ptp port number,the value must be configured when create a port,1 means combined-oc.
INT zxr10ptpPortShowPortState	1.3.6.1.4.1.3902.3.101.10.11.1.4	INTEGER	read-only	The port state.
zxr10ptpPortTable	1.3.6.1.4.1.3902.3.101.10.12		not-accessible	A table containing PTP port configure information.
zxr10ptpPortEntry	1.3.6.1.4.1.3902.3.101.10.12.1		not-accessible	Information of PTP port.
STR zxr10ptpPortIfName	1.3.6.1.4.1.3902.3.101.10.12.1.1	DisplayString	not-accessible	The PTP port name.
INT zxr10ptpPortType	1.3.6.1.4.1.3902.3.101.10.12.1.2	INTEGER	not-accessible	The PTP port type,1 means combined-oc, 2 means general port.
U32 zxr10ptpPortIndexVlanid	1.3.6.1.4.1.3902.3.101.10.12.1.3	Unsigned32	not-accessible	The ptp port vlan ID.
I32 zxr10PTPPortNum	1.3.6.1.4.1.3902.3.101.10.12.1.4	Integer32	read-write	The ptp port number,the value must be configured when create a port,1 means combined-oc.
INT zxr10ptpPortEnable	1.3.6.1.4.1.3902.3.101.10.12.1.5	INTEGER	read-write	Enable or disable a ptp port.
INT zxr10ptpPortState	1.3.6.1.4.1.3902.3.101.10.12.1.6	INTEGER	read-write	The ptp port state configured by manual, masterslave state only t8000\M6k support.
I32 zxr10ptpPortSyncInterval	1.3.6.1.4.1.3902.3.101.10.12.1.7	Integer32	read-only	The ptp sync interval,for upp3081 the range is -8..1, for 15k,the range is -4..1.
I32 zxr10ptpPortDelayReqInterval	1.3.6.1.4.1.3902.3.101.10.12.1.8	Integer32	read-only	The ptp delay req interval,for upp3081 the range is -5..5, for 15k,the range is -4..5.
INT zxr10ptpPortMultiDomainEnable	1.3.6.1.4.1.3902.3.101.10.12.1.9	INTEGER	read-only	The ptp port is multi domain port or not, only upp3081 support.
INT zxr10ptpPortDelayMech	1.3.6.1.4.1.3902.3.101.10.12.1.10	INTEGER	read-only	The delay mechanism of the ptp port,only upp3081 support.
INT zxr10PTPPortNetProtocol	1.3.6.1.4.1.3902.3.101.10.12.1.11	INTEGER	read-only	The port net protocol,only upp3081 and 15k support.
INT zxr10ptpPortTransmitMode	1.3.6.1.4.1.3902.3.101.10.12.1.12	INTEGER	read-only	The port packet transmit mode,only 15k support.
U32 zxr10PTPPortUnSymmetry	1.3.6.1.4.1.3902.3.101.10.12.1.13	Unsigned32	read-only	The unsymmetrical offset(ns),consider the effect of the zxr10PTPPortUnSign node.t8000\M6k not support.
INT zxr10PTPPortUnSign	1.3.6.1.4.1.3902.3.101.10.12.1.14	INTEGER	read-only	The unsymmetrical offset sign,consider the effect of the zxr10PTPPortUnSymmetry node.t8000\M6k not support.
I32 zxr10PTPPortVlanId	1.3.6.1.4.1.3902.3.101.10.12.1.15	Integer32	read-only	Vlan id, only valid for 15k,other projects maybe not support
STR zxr10PTPPortSourceName	1.3.6.1.4.1.3902.3.101.10.12.1.16	DisplayString	read-write	The PTP source interface name.
I32 zxr10PTPPortPDelayReqInterval	1.3.6.1.4.1.3902.3.101.10.12.1.17	Integer32	read-only	The ptp pdelay req interval,only upp3081 and 15k support.
INT zxr10ptpPortPktStatistic	1.3.6.1.4.1.3902.3.101.10.12.1.18	INTEGER	read-only	packet statistic switch.
INT zxr10ptpPortWorkMode	1.3.6.1.4.1.3902.3.101.10.12.1.19	INTEGER	read-only	The ptp port work mode.
INT zxr10ptpPortVlanPriority	1.3.6.1.4.1.3902.3.101.10.12.1.20	INTEGER	read-only	Vlan priority
INT zxr10ptpPortUniNegoDura	1.3.6.1.4.1.3902.3.101.10.12.1.21	INTEGER	read-only	Unicast negotiation duration of the port.
zxr10ptpAcceptDstIpTable	1.3.6.1.4.1.3902.3.101.10.13		not-accessible	A table containing PTP port dest ip configure information.
zxr10ptpAcceptDstIpEntry	1.3.6.1.4.1.3902.3.101.10.13.1		not-accessible	Information about the PTP interface destination IP.
STR zxr10PTPAcceptDestIpPortName	1.3.6.1.4.1.3902.3.101.10.13.1.1	DisplayString	not-accessible	The PTP port name.
INT zxr10PTPAcceptDestIpPortType	1.3.6.1.4.1.3902.3.101.10.13.1.2	INTEGER	not-accessible	The PTP port type,1 means combined-oc,2 means oc,bc,tc.
IP zxr10PTPAcceptDestIpIndex	1.3.6.1.4.1.3902.3.101.10.13.1.3	IpAddress	not-accessible	The port destination IP address.
U32 zxr10ptpAcceptDestIpVlanid	1.3.6.1.4.1.3902.3.101.10.13.1.4	Unsigned32	not-accessible	The ptp port vlan ID.
INT zxr10PTPAcceptDestIpPortNum	1.3.6.1.4.1.3902.3.101.10.13.1.5	INTEGER	read-only	The PTP port number,1 means combined-oc.
INT zxr10PTPAcceptDestIpPriority1	1.3.6.1.4.1.3902.3.101.10.13.1.6	INTEGER	read-only	Set priority1 of accept master IP.
INT zxr10PTPAcceptDestIpPortMode	1.3.6.1.4.1.3902.3.101.10.13.1.7	INTEGER	read-only	Set the port mode of PTP.

RFC description

ZTE ZXR10 Precision Time Protocol MIB managing PTP synchronization for network timing on router equipment.

Start monitoring ZTE ZXR10 series switches/routers (IEEE 1588 PTP clock-lock/port-state status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-PTP-MIB

What Is ZXR10-PTP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description